LKML Archive mirror
 help / color / mirror / Atom feed
From: Tianyang Zhang <zhangtianyang@loongson.cn>
To: chenhuacai@kernel.org, kernel@xen0n.name, corbet@lwn.net,
	alexs@kernel.org, siyanteng@loongson.cn
Cc: loongarch@lists.linux.dev, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Tianyang Zhang <zhangtianyang@loongson.cn>
Subject: [PATCH 1/2] docs: Add advanced extended IRQ model description
Date: Tue,  7 May 2024 20:22:28 +0800	[thread overview]
Message-ID: <20240507122228.5288-1-zhangtianyang@loongson.cn> (raw)

From 3C6000, Loongarch began to support advanced extended
interrupt mode, in which each CPU has an independent interrupt
vector number.This will enhance the architecture's ability
to support modern devices

Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
---
 .../arch/loongarch/irq-chip-model.rst         | 33 +++++++++++++++++
 .../zh_CN/arch/loongarch/irq-chip-model.rst   | 37 +++++++++++++++++--
 2 files changed, 67 insertions(+), 3 deletions(-)

diff --git a/Documentation/arch/loongarch/irq-chip-model.rst b/Documentation/arch/loongarch/irq-chip-model.rst
index 7988f4192363..79228741d1b9 100644
--- a/Documentation/arch/loongarch/irq-chip-model.rst
+++ b/Documentation/arch/loongarch/irq-chip-model.rst
@@ -85,6 +85,39 @@ to CPUINTC directly::
     | Devices |
     +---------+
 
+Advanced Extended IRQ model
+=======================
+
+In this model, IPI (Inter-Processor Interrupt) and CPU Local Timer interrupt go
+to CPUINTC directly, CPU UARTS interrupts go to LIOINTC, MSI interrupts go to AVEC,
+and then go to CPUINTC, Other devices interrupts go to PCH-PIC/PCH-LPC and gathered
+by EIOINTC, and then go to CPUINTC directly::
+
+ +-----+     +--------------------------+     +-------+
+ | IPI | --> |           CPUINTC        | <-- | Timer |
+ +-----+     +--------------------------+     +-------+
+              ^        ^             ^
+              |        |             |
+      +--------+  +---------+ +---------+     +-------+
+      | AVEC   |  | EIOINTC | | LIOINTC | <-- | UARTs |
+      +--------+  +---------+ +---------+     +-------+
+           ^            ^
+           |            |
+         +---------+  +---------+
+         |   MSI   |  | PCH-PIC |
+         +---------+  +---------+
+            ^          ^       ^
+            |          |       |
+    +---------+ +---------+ +---------+
+    | Devices | | PCH-LPC | | Devices |
+    +---------+ +---------+ +---------+
+                     ^
+                     |
+                +---------+
+                | Devices |
+                +---------+
+
+
 ACPI-related definitions
 ========================
 
diff --git a/Documentation/translations/zh_CN/arch/loongarch/irq-chip-model.rst b/Documentation/translations/zh_CN/arch/loongarch/irq-chip-model.rst
index f1e9ab18206c..7ccde82dd666 100644
--- a/Documentation/translations/zh_CN/arch/loongarch/irq-chip-model.rst
+++ b/Documentation/translations/zh_CN/arch/loongarch/irq-chip-model.rst
@@ -9,9 +9,8 @@
 LoongArch的IRQ芯片模型(层级关系)
 ==================================
 
-目前,基于LoongArch的处理器(如龙芯3A5000)只能与LS7A芯片组配合工作。LoongArch计算机
-中的中断控制器(即IRQ芯片)包括CPUINTC(CPU Core Interrupt Controller)、LIOINTC(
-Legacy I/O Interrupt Controller)、EIOINTC(Extended I/O Interrupt Controller)、
+LoongArch计算机中的中断控制器(即IRQ芯片)包括CPUINTC(CPU Core Interrupt Controller)、
+LIOINTC(Legacy I/O Interrupt Controller)、EIOINTC(Extended I/O Interrupt Controller)、
 HTVECINTC(Hyper-Transport Vector Interrupt Controller)、PCH-PIC(LS7A芯片组的主中
 断控制器)、PCH-LPC(LS7A芯片组的LPC中断控制器)和PCH-MSI(MSI中断控制器)。
 
@@ -87,6 +86,38 @@ PCH-LPC/PCH-MSI,然后被EIOINTC统一收集,再直接到达CPUINTC::
     | Devices |
     +---------+
 
+高级扩展IRQ模型
+=======================
+
+在这种模型里面,IPI(Inter-Processor Interrupt)和CPU本地时钟中断直接发送到CPUINTC,
+CPU串口(UARTs)中断发送到LIOINTC,MSI中断发送到AVEC,而后通过AVEC送达CPUINTC,而
+其他所有设备的中断则分别发送到所连接的PCH-PIC/PCH-LPC,然后由EIOINTC统一收集,再直
+接到达CPUINTC::
+
+ +-----+     +--------------------------+     +-------+
+ | IPI | --> |           CPUINTC        | <-- | Timer |
+ +-----+     +--------------------------+     +-------+
+              ^        ^             ^
+              |        |             |
+      +--------+  +---------+ +---------+     +-------+
+      | AVEC   |  | EIOINTC | | LIOINTC | <-- | UARTs |
+      +--------+  +---------+ +---------+     +-------+
+              ^        ^
+              |        |
+      +---------+  +-------------+
+      |   MSI   |  |   PCH-PIC   |
+      +---------+  +-------------+
+            ^          ^       ^
+            |          |       |
+    +---------+ +---------+ +---------+
+    | Devices | | PCH-LPC | | Devices |
+    +---------+ +---------+ +---------+
+                     ^
+                     |
+                +---------+
+                | Devices |
+                +---------+
+
 ACPI相关的定义
 ==============
 
-- 
2.20.1


             reply	other threads:[~2024-05-07 12:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-07 12:22 Tianyang Zhang [this message]
2024-05-08 22:29 ` [PATCH 1/2] docs: Add advanced extended IRQ model description Randy Dunlap
2024-05-13  6:40   ` Tianyang Zhang
2024-05-09  2:24 ` Dongliang Mu
2024-05-13  6:38   ` Tianyang Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240507122228.5288-1-zhangtianyang@loongson.cn \
    --to=zhangtianyang@loongson.cn \
    --cc=alexs@kernel.org \
    --cc=chenhuacai@kernel.org \
    --cc=corbet@lwn.net \
    --cc=kernel@xen0n.name \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loongarch@lists.linux.dev \
    --cc=siyanteng@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).