From: Mark Brown <broonie@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
Mark Brown <broonie@kernel.org>
Subject: [GIT PULL] SPI updates for v6.10
Date: Mon, 13 May 2024 10:39:18 +0100 [thread overview]
Message-ID: <9e996db977142fec01e9cbbbfb79c07d.broonie@kernel.org> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 11877 bytes --]
The following changes since commit fec50db7033ea478773b159e0e2efb135270e3b7:
Linux 6.9-rc3 (2024-04-07 13:22:46 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git tags/spi-v6.10
for you to fetch changes up to d6e7ffd4820f8894eb865890c96852085d3640e1:
spi: dw: Bail out early on unsupported target mode (2024-05-09 17:48:06 +0200)
----------------------------------------------------------------
spi: Updates for v6.10
The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release. There
were a couple of cleanups in the core but nothing substantial, the
updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver.
- Overhaul of the PXA2xx driver, mostly API updates.
- A number of DT binding conversions.
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0.
----------------------------------------------------------------
Andy Shevchenko (32):
spi: xilinx: Fix kernel documentation in the xilinx_spi.h
spi: xilinx: Add necessary inclusion and forward declaration
spi: xilinx: Make num_chipselect 8-bit in the struct xspi_platform_data
spi: pxa2xx: Kill pxa2xx_set_spi_info()
spi: pxa2xx: Make num_chipselect 8-bit in the struct pxa2xx_spi_controller
spi: pxa2xx: Use proper SSP header in soc/pxa/ssp.c
spi: rspi: Get rid of unused struct rspi_plat_data
spi: pxa2xx: Keep PXA*_SSP types together
spi: pxa2xx: Switch to use dev_err_probe()
spi: pxa2xx: Narrow the Kconfig option visibility
spi: pxa2xx: Drop ACPI_PTR() and of_match_ptr()
spi: pxa2xx: Extract pxa2xx_spi_init_ssp() helper
spi: pxa2xx: Skip SSP initialization if it's done elsewhere
spi: pxa2xx: Call pxa_ssp_free() after getting the SSP type
spi: pxa2xx: Move number of CS pins validation out of condition
spi: Extract spi_toggle_csgpiod() helper for better maintanance
spi: Introduce spi_for_each_valid_cs() in order of deduplication
spi: Consistently use BIT for cs_index_mask (part 2)
spi: oc-tiny: Remove unused of_gpio.h
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: Remove unneded check for orig_nents
Charles Keepax (4):
gpio: swnode: Add ability to specify native chip selects for SPI
spi: Switch to using is_acpi_device_node() in spi_dev_set_name()
spi: Update swnode based SPI devices to use the fwnode name
spi: cs42l43: Use devm_add_action_or_reset()
David Lechner (4):
spi: remove struct spi_message::is_dma_mapped
spi: au1550: t->{tx,rx}_dma checks
spi: fsl: remove is_dma_mapped checks
spi: use spi_valid_{tx,rx}buf() in stats function
Fei Shao (1):
spi: spi-mt65xx: Rename a variable in interrupt handler
Geert Uytterhoeven (2):
spi: renesas,sh-msiof: Add r8a779h0 support
spi: dw: Bail out early on unsupported target mode
Heikki Keranen (1):
spi: mux: Fix master controller settings after mux select
Justin Swartz (1):
spi: mt7621: allow GPIO chip select lines
Kousik Sanagavarapu (3):
spi: cadence-xspi: use for_each_available_child_of_node_scoped()
spi: dt-bindings: armada-3700: convert to dtschema
spi: dt-bindings: ti,qspi: convert to dtschema
Krzysztof Kozlowski (5):
spi: loopback-test: drop driver owner assignment
spi: coldfire-qspi: drop driver owner assignment
spi: fsl-dspi: drop driver owner assignment
spi: docs: drop driver owner initialization
spi: altera: Drop unneeded MODULE_ALIAS
Lorenzo Bianconi (2):
spi: airoha: add SPI-NAND Flash controller driver
spi: dt-bindings: airoha: Add YAML schema for SNFI controller
Louis Chauvet (3):
spi: spi-omap2-mcspi.c: revert "Toggle CS after each word"
spi: omap2-mcspi: Add support for MULTI-mode
spi: omap2-mcpsi: Enable MULTI-mode in more situations
Lukas Bulwahn (2):
MAINTAINERS: adjust file entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
Maciej Strozek (2):
spi: cs42l43: Add bridged cs35l56 amplifiers
spi: cs42l43: Correct name of ACPI property
Mark Brown (11):
spi: pxa2xx: Clean up linux/spi/pxa2xx_spi.h
spi: xilinx: Massage xilinx_spi.h
Add multi mode support for omap-mcspi
spi: more tx_buf/rx_buf removal
spi: cadence-qspi: Prepare to add Mobileye EyeQ5 support
spi: More refacroings after multi-CS support
Add bridged amplifiers to cs42l43
Add add SPI-NAND Flash controller driver for EN7581
spi: use 'time_left' instead of 'timeout' with
spi: dw: Auto-detect number of native CS
spi: pxa2xx: Drop linux/spi/pxa2xx_spi.h
Raju Rangoju (1):
spi: spi_amd: Add support for SPI MEM framework
Randy Dunlap (1):
spi: spi.h: add missing kernel-doc for @last_cs_index_mask
Serge Semin (4):
spi: dw: Convert to using BITS_TO_BYTES() macro
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Drop default number of CS setting
Shivani Gupta (1):
spi: spi-s3c64xx.c: Remove of_node_put for auto cleanup
Théo Lebrun (10):
spi: cadence-qspi: allow building for MIPS
spi: cadence-qspi: store device data pointer in private struct
spi: cadence-qspi: minimise register accesses on each op if !DTR
spi: dt-bindings: cdns,qspi-nor: sort compatibles alphabetically
spi: dt-bindings: cdns,qspi-nor: add mobileye,eyeq5-ospi compatible
spi: dt-bindings: cdns,qspi-nor: make cdns,fifo-depth optional
spi: cadence-qspi: allow FIFO depth detection
spi: cadence-qspi: add no-IRQ mode to indirect reads
spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()
spi: cadence-qspi: add mobileye,eyeq5-ospi compatible
Wolfram Sang (8):
spi: armada-3700: use 'time_left' variable with wait_for_completion_timeout()
spi: fsl-lpspi: use 'time_left' variable with wait_for_completion_timeout()
spi: imx: use 'time_left' variable with wait_for_completion_timeout()
spi: pic32-sqi: use 'time_left' variable with wait_for_completion_timeout()
spi: pic32: use 'time_left' variable with wait_for_completion_timeout()
spi: sun4i: use 'time_left' variable with wait_for_completion_timeout()
spi: sun6i: use 'time_left' variable with wait_for_completion_timeout()
spi: xlp: use 'time_left' variable with wait_for_completion_timeout()
.../bindings/spi/airoha,en7581-snand.yaml | 65 ++
.../devicetree/bindings/spi/cdns,qspi-nor.yaml | 8 +-
.../bindings/spi/marvell,armada-3700-spi.yaml | 55 +
.../devicetree/bindings/spi/renesas,sh-msiof.yaml | 1 +
.../devicetree/bindings/spi/spi-armada-3700.txt | 25 -
Documentation/devicetree/bindings/spi/ti,qspi.yaml | 96 ++
Documentation/devicetree/bindings/spi/ti_qspi.txt | 53 -
Documentation/spi/index.rst | 1 -
Documentation/spi/pxa2xx.rst | 211 ----
Documentation/spi/spi-summary.rst | 5 -
MAINTAINERS | 11 +-
arch/arm/mach-pxa/devices.c | 18 -
arch/arm/mach-pxa/spitz.c | 35 +-
drivers/gpio/Kconfig | 9 +
drivers/gpio/gpiolib-swnode.c | 44 +
drivers/soc/pxa/ssp.c | 2 +-
drivers/spi/Kconfig | 22 +-
drivers/spi/Makefile | 1 +
drivers/spi/spi-airoha-snfi.c | 1129 ++++++++++++++++++++
drivers/spi/spi-altera-platform.c | 1 -
drivers/spi/spi-amd.c | 112 ++
drivers/spi/spi-armada-3700.c | 8 +-
drivers/spi/spi-atmel.c | 8 +-
drivers/spi/spi-au1550.c | 29 +-
drivers/spi/spi-bitbang.c | 23 +-
drivers/spi/spi-cadence-quadspi.c | 109 +-
drivers/spi/spi-cadence-xspi.c | 8 +-
drivers/spi/spi-coldfire-qspi.c | 1 -
drivers/spi/spi-cs42l43.c | 127 ++-
drivers/spi/spi-dw-core.c | 20 +-
drivers/spi/spi-dw-mmio.c | 13 +-
drivers/spi/spi-dw.h | 2 +-
drivers/spi/spi-fsl-cpm.c | 14 +-
drivers/spi/spi-fsl-cpm.h | 5 +-
drivers/spi/spi-fsl-dspi.c | 1 -
drivers/spi/spi-fsl-lpspi.c | 14 +-
drivers/spi/spi-fsl-spi.c | 7 +-
drivers/spi/spi-imx.c | 20 +-
drivers/spi/spi-loopback-test.c | 1 -
drivers/spi/spi-mt65xx.c | 32 +-
drivers/spi/spi-mt7621.c | 95 +-
drivers/spi/spi-mux.c | 2 +
drivers/spi/spi-oc-tiny.c | 2 -
drivers/spi/spi-omap2-mcspi.c | 95 +-
drivers/spi/spi-pic32-sqi.c | 6 +-
drivers/spi/spi-pic32.c | 6 +-
drivers/spi/spi-pxa2xx-dma.c | 38 +-
drivers/spi/spi-pxa2xx-pci.c | 10 +-
drivers/spi/spi-pxa2xx.c | 223 ++--
drivers/spi/spi-pxa2xx.h | 42 +-
drivers/spi/spi-rspi.c | 12 +-
drivers/spi/spi-s3c64xx.c | 6 +-
drivers/spi/spi-sun4i.c | 9 +-
drivers/spi/spi-sun6i.c | 17 +-
drivers/spi/spi-xlp.c | 8 +-
drivers/spi/spi.c | 126 +--
include/linux/gpio/property.h | 4 +
include/linux/platform_data/spi-omap2-mcspi.h | 3 -
include/linux/pxa2xx_ssp.h | 2 +-
include/linux/spi/pxa2xx_spi.h | 56 -
include/linux/spi/rspi.h | 18 -
include/linux/spi/spi.h | 12 +-
include/linux/spi/xilinx_spi.h | 14 +-
63 files changed, 2224 insertions(+), 928 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml
create mode 100644 Documentation/devicetree/bindings/spi/marvell,armada-3700-spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-armada-3700.txt
create mode 100644 Documentation/devicetree/bindings/spi/ti,qspi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/ti_qspi.txt
delete mode 100644 Documentation/spi/pxa2xx.rst
create mode 100644 drivers/spi/spi-airoha-snfi.c
delete mode 100644 include/linux/spi/pxa2xx_spi.h
delete mode 100644 include/linux/spi/rspi.h
next reply other threads:[~2024-05-13 9:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-13 9:39 Mark Brown [this message]
2024-05-14 21:44 ` [GIT PULL] SPI updates for v6.10 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e996db977142fec01e9cbbbfb79c07d.broonie@kernel.org \
--to=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).