All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Subject: [Qemu-devel] [PATCH 02/38] gdbstub: Fix gdb_register_coprocessor() register counting
Date: Wed, 25 Sep 2013 07:57:30 -0500	[thread overview]
Message-ID: <1380113886-16845-3-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1380113886-16845-1-git-send-email-mdroth@linux.vnet.ibm.com>

From: Andreas Färber <afaerber@suse.de>

Commit a0e372f0c49ac01faeaeb73a6e8f50e8ac615f34 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.

Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 35143f0164e6933a85c7c2b8a89a040d881a9151)

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
 gdbstub.c         |    6 ++++--
 include/qom/cpu.h |    2 ++
 qom/cpu.c         |    2 +-
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/gdbstub.c b/gdbstub.c
index 1af25a6..9d067d6 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -621,6 +621,8 @@ void gdb_register_coprocessor(CPUState *cpu,
         if (g_pos != s->base_reg) {
             fprintf(stderr, "Error: Bad gdb register numbering for '%s'\n"
                     "Expected %d got %d\n", xml, g_pos, s->base_reg);
+        } else {
+            cpu->gdb_num_g_regs = cpu->gdb_num_regs;
         }
     }
 }
@@ -902,7 +904,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
     case 'g':
         cpu_synchronize_state(s->g_cpu);
         len = 0;
-        for (addr = 0; addr < s->g_cpu->gdb_num_regs; addr++) {
+        for (addr = 0; addr < s->g_cpu->gdb_num_g_regs; addr++) {
             reg_size = gdb_read_register(s->g_cpu, mem_buf + len, addr);
             len += reg_size;
         }
@@ -914,7 +916,7 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
         registers = mem_buf;
         len = strlen(p) / 2;
         hextomem((uint8_t *)registers, p, len);
-        for (addr = 0; addr < s->g_cpu->gdb_num_regs && len > 0; addr++) {
+        for (addr = 0; addr < s->g_cpu->gdb_num_g_regs && len > 0; addr++) {
             reg_size = gdb_write_register(s->g_cpu, registers, addr);
             len -= reg_size;
             registers += reg_size;
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 0d6e95c..3e49936 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -152,6 +152,7 @@ struct kvm_run;
  * @current_tb: Currently executing TB.
  * @gdb_regs: Additional GDB registers.
  * @gdb_num_regs: Number of total registers accessible to GDB.
+ * @gdb_num_g_regs: Number of registers in GDB 'g' packets.
  * @next_cpu: Next CPU sharing TB cache.
  * @kvm_fd: vCPU file descriptor for KVM.
  *
@@ -188,6 +189,7 @@ struct CPUState {
     struct TranslationBlock *current_tb;
     struct GDBRegisterState *gdb_regs;
     int gdb_num_regs;
+    int gdb_num_g_regs;
     CPUState *next_cpu;
 
     int kvm_fd;
diff --git a/qom/cpu.c b/qom/cpu.c
index aa95108..e71e57b 100644
--- a/qom/cpu.c
+++ b/qom/cpu.c
@@ -240,7 +240,7 @@ static void cpu_common_initfn(Object *obj)
     CPUState *cpu = CPU(obj);
     CPUClass *cc = CPU_GET_CLASS(obj);
 
-    cpu->gdb_num_regs = cc->gdb_num_core_regs;
+    cpu->gdb_num_regs = cpu->gdb_num_g_regs = cc->gdb_num_core_regs;
 }
 
 static int64_t cpu_common_get_arch_id(CPUState *cpu)
-- 
1.7.9.5

  parent reply	other threads:[~2013-09-25 12:58 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-25 12:57 [Qemu-devel] Patch Round-up for stable 1.6.1, freeze on 2013-09-30 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 01/38] block: ensure bdrv_drain_all() works during bdrv_delete() Michael Roth
2013-09-25 12:57 ` Michael Roth [this message]
2013-09-25 12:57 ` [Qemu-devel] [PATCH 03/38] target-ppc: fix bit extraction for FPBF and FPL Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 04/38] rdma: silly ipv6 bugfix Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 05/38] scripts/qapi.py: Avoid syntax not supported by Python 2.4 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 06/38] usb/dev-hid: Modified usb-tablet category from Misc to Input Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 07/38] scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 08/38] pc: fix regression for 64 bit PCI memory Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 09/38] pseries: Fix stalls on hypervisor virtual console Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 10/38] virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 11/38] xhci: fix endpoint interval calculation Michael Roth
2013-09-25 13:41   ` Gerd Hoffmann
2013-09-25 12:57 ` [Qemu-devel] [PATCH 12/38] Revert "usb-hub: report status changes only once" Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 13/38] block: expect errors from bdrv_co_is_allocated Michael Roth
2013-09-25 21:27   ` [Qemu-devel] [Qemu-stable] " Doug Goldstein
2013-09-26 20:51     ` Paolo Bonzini
2013-09-25 12:57 ` [Qemu-devel] [PATCH 14/38] target-i386: fix disassembly with PAE=1, PG=0 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 15/38] adlib: sort offsets in portio registration Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 16/38] exec: fix writing to MMIO area with non-power-of-two length Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 17/38] virtio_pci: fix level interrupts with irqfd Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 18/38] exec: always use MADV_DONTFORK Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 19/38] xhci: reset port when disabling slot Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 20/38] usb: parallelize usb3 streams Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 21/38] w32: Fix access to host devices (regression) Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 22/38] memory: Provide separate handling of unassigned io ports accesses Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 23/38] Revert "memory: Return -1 again on reads from unsigned regions" Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 24/38] exec: check offset_within_address_space for register subpage Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 25/38] ne2000: mark I/O as LITTLE_ENDIAN Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 26/38] ehci: save device pointer in EHCIState Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 27/38] qxl: fix local renderer Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 28/38] pc: Initializing ram_memory under Xen Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 29/38] pc_q35: Initialize Xen Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 30/38] qapi-types.py: Fix enum struct sizes on i686 Michael Roth
2013-09-25 12:57 ` [Qemu-devel] [PATCH 31/38] pcnet-pci: mark I/O and MMIO as LITTLE_ENDIAN Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 32/38] chardev: fix pty_chr_timer Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 33/38] kvmvapic: Catch invalid ROM size Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 34/38] kvmvapic: Enter inactive state on hardware reset Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 35/38] kvmvapic: Clear also physical ROM address when entering INACTIVE state Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 36/38] tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 37/38] blockdev: do not default cache.no-flush to true Michael Roth
2013-09-25 12:58 ` [Qemu-devel] [PATCH 38/38] virtio-blk: do not relay a previous driver's WCE configuration to the current Michael Roth
2013-09-25 13:54 ` [Qemu-devel] [Qemu-stable] Patch Round-up for stable 1.6.1, freeze on 2013-09-30 Cole Robinson
2013-09-25 21:43   ` Doug Goldstein
2013-09-26 20:53   ` Paolo Bonzini
2013-09-26  4:53 ` [Qemu-devel] " Stefan Weil
2013-09-26  5:22 ` Fam Zheng
2013-09-26 19:38 ` Stefan Weil
2013-09-27  7:30   ` Michael Tokarev
2013-09-27  8:07 ` [Qemu-devel] [Qemu-stable] " Michael Tokarev
2013-09-27  8:11   ` Michael Tokarev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380113886-16845-3-git-send-email-mdroth@linux.vnet.ibm.com \
    --to=mdroth@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.