From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Sun, 10 May 2015 20:45:56 +0530 Subject: [U-Boot] [U-Boot PATCH v2 16/17] spi: Kconfig: Add Zynq QSPI controller entry In-Reply-To: <1431270957-6901-1-git-send-email-jteki@openedev.com> References: <1431270957-6901-1-git-send-email-jteki@openedev.com> Message-ID: <1431270957-6901-17-git-send-email-jteki@openedev.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add Zynq QSPI controller Kconfig entry. Signed-off-by: Jagan Teki Cc: Simon Glass Cc: Marek Vasut Cc: Michal Simek Cc: Siva Durga Prasad Paladugu --- drivers/spi/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 357a335..76545b0 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -51,3 +51,12 @@ config CADENCE_QSPI Enable the Cadence Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Cadence IP core. + +config ZYNQ_QSPI + bool "Zynq QSPI driver" + depends on DM_SPI && (ARCH_ZYNQ || TARGET_XILINX_ZYNQMP) + help + Enable the Zynq Quad-SPI (QSPI) driver. This driver can be + used to access the SPI NOR flash on platforms embedding this + Zynq QSPI IP core. This IP is used to connect the flash in + 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel. -- 1.9.1