From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Sun, 10 May 2015 20:45:45 +0530 Subject: [U-Boot] [U-Boot PATCH v2 05/17] spi: xilinx_spi: Driver clean-up In-Reply-To: <1431270957-6901-1-git-send-email-jteki@openedev.com> References: <1431270957-6901-1-git-send-email-jteki@openedev.com> Message-ID: <1431270957-6901-6-git-send-email-jteki@openedev.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de - Zap unneeded macros - Re-arrange the code - Removed __attribute__((weak)) - Replace __func__ macro with func names to save macro transition. - Re-arranged comment lines. - Arrange driver code in more readable format[1] [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki Acked-by: Michal Simek --- drivers/spi/xilinx_spi.c | 164 ++++++++++++++++------------------------------- 1 file changed, 57 insertions(+), 107 deletions(-) diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 8073edc..650e494 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -1,79 +1,31 @@ /* * Xilinx SPI driver * - * supports 8 bit SPI transfers only, with or w/o FIFO + * Supports 8 bit SPI transfers only, with or w/o FIFO * - * based on bfin_spi.c, by way of altera_spi.c - * Copyright (c) 2005-2008 Analog Devices Inc. - * Copyright (c) 2010 Thomas Chou - * Copyright (c) 2010 Graeme Smecher + * Based on bfin_spi.c, by way of altera_spi.c * Copyright (c) 2012 Stephan Linz + * Copyright (c) 2010 Graeme Smecher + * Copyright (c) 2010 Thomas Chou + * Copyright (c) 2005-2008 Analog Devices Inc. * * SPDX-License-Identifier: GPL-2.0+ - * - * [0]: http://www.xilinx.com/support/documentation - * - * [S]: [0]/ip_documentation/xps_spi.pdf - * [0]/ip_documentation/axi_spi_ds742.pdf */ + #include #include #include #include /* - * Xilinx SPI Register Definition + * [0]: http://www.xilinx.com/support/documentation * + * Xilinx SPI Register Definitions * [1]: [0]/ip_documentation/xps_spi.pdf * page 8, Register Descriptions * [2]: [0]/ip_documentation/axi_spi_ds742.pdf * page 7, Register Overview Table */ -struct xilinx_spi_reg { - u32 __space0__[7]; - u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ - u32 ipisr; /* IP Interrupt Status Register (IPISR) */ - u32 __space1__; - u32 ipier; /* IP Interrupt Enable Register (IPIER) */ - u32 __space2__[5]; - u32 srr; /* Softare Reset Register (SRR) */ - u32 __space3__[7]; - u32 spicr; /* SPI Control Register (SPICR) */ - u32 spisr; /* SPI Status Register (SPISR) */ - u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ - u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ - u32 spissr; /* SPI Slave Select Register (SPISSR) */ - u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ - u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ -}; - -/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */ -#define DGIER_GIE (1 << 31) - -/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */ -#define IPISR_DRR_NOT_EMPTY (1 << 8) -#define IPISR_SLAVE_SELECT (1 << 7) -#define IPISR_TXF_HALF_EMPTY (1 << 6) -#define IPISR_DRR_OVERRUN (1 << 5) -#define IPISR_DRR_FULL (1 << 4) -#define IPISR_DTR_UNDERRUN (1 << 3) -#define IPISR_DTR_EMPTY (1 << 2) -#define IPISR_SLAVE_MODF (1 << 1) -#define IPISR_MODF (1 << 0) - -/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */ -#define IPIER_DRR_NOT_EMPTY (1 << 8) -#define IPIER_SLAVE_SELECT (1 << 7) -#define IPIER_TXF_HALF_EMPTY (1 << 6) -#define IPIER_DRR_OVERRUN (1 << 5) -#define IPIER_DRR_FULL (1 << 4) -#define IPIER_DTR_UNDERRUN (1 << 3) -#define IPIER_DTR_EMPTY (1 << 2) -#define IPIER_SLAVE_MODF (1 << 1) -#define IPIER_MODF (1 << 0) - -/* Softare Reset Register (srr), [1] p9, [2] p8 */ -#define SRR_RESET_CODE 0x0000000A /* SPI Control Register (spicr), [1] p9, [2] p8 */ #define SPICR_LSB_FIRST (1 << 9) @@ -110,17 +62,42 @@ struct xilinx_spi_reg { #define SPISSR_ACT(cs) ~SPISSR_MASK(cs) #define SPISSR_OFF ~0UL -/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */ -#define SPITFOR_OCYVAL_POS 0 -#define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS) - -/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */ -#define SPIRFOR_OCYVAL_POS 0 -#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS) - /* SPI Software Reset Register (ssr) */ #define SPISSR_RESET_VALUE 0x0a +#define XILSPI_MAX_XFER_BITS 8 +#define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | SPICR_MASTER_MODE | \ + SPICR_SPE) +#define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS) + +#ifndef CONFIG_XILINX_SPI_IDLE_VAL +#define CONFIG_XILINX_SPI_IDLE_VAL 0xff +#endif + +#ifndef CONFIG_SYS_XILINX_SPI_LIST +#define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } +#endif + +/* xilinx spi register set */ +struct xilinx_spi_reg { + u32 __space0__[7]; + u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ + u32 ipisr; /* IP Interrupt Status Register (IPISR) */ + u32 __space1__; + u32 ipier; /* IP Interrupt Enable Register (IPIER) */ + u32 __space2__[5]; + u32 srr; /* Softare Reset Register (SRR) */ + u32 __space3__[7]; + u32 spicr; /* SPI Control Register (SPICR) */ + u32 spisr; /* SPI Status Register (SPISR) */ + u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ + u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ + u32 spissr; /* SPI Slave Select Register (SPISSR) */ + u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ + u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ +}; + +/* xilinx spi slave */ struct xilinx_spi_slave { struct spi_slave slave; struct xilinx_spi_reg *regs; @@ -129,37 +106,17 @@ struct xilinx_spi_slave { }; static inline struct xilinx_spi_slave *to_xilinx_spi_slave( - struct spi_slave *slave) + struct spi_slave *slave) { return container_of(slave, struct xilinx_spi_slave, slave); } -#ifndef CONFIG_SYS_XILINX_SPI_LIST -#define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } -#endif - -#ifndef CONFIG_XILINX_SPI_IDLE_VAL -#define CONFIG_XILINX_SPI_IDLE_VAL 0xff -#endif - -#define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | \ - SPICR_MASTER_MODE | \ - SPICR_SPE) - -#define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | \ - SPICR_MANUAL_SS) - -#define XILSPI_MAX_XFER_BITS 8 - static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST; - -__attribute__((weak)) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus < ARRAY_SIZE(xilinx_spi_base_list) && cs < 32; } -__attribute__((weak)) void spi_cs_activate(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); @@ -167,7 +124,6 @@ void spi_cs_activate(struct spi_slave *slave) writel(SPISSR_ACT(slave->cs), &xilspi->regs->spissr); } -__attribute__((weak)) void spi_cs_deactivate(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); @@ -180,33 +136,26 @@ void spi_init(void) /* do nothing */ } -void spi_set_speed(struct spi_slave *slave, uint hz) -{ - /* xilinx spi core does not support programmable speed */ -} - struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct xilinx_spi_slave *xilspi; if (!spi_cs_is_valid(bus, cs)) { - printf("XILSPI error: %s: unsupported bus %d / cs %d\n", - __func__, bus, cs); + printf("XILSPI error: unsupported bus %d / cs %d\n", bus, cs); return NULL; } xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs); if (!xilspi) { - printf("XILSPI error: %s: malloc of SPI structure failed\n", - __func__); + printf("XILSPI error: malloc of SPI structure failed\n"); return NULL; } xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus]; xilspi->freq = max_hz; xilspi->mode = mode; - debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__, - bus, cs, xilspi->regs, xilspi->mode, xilspi->freq); + debug("spi_setup_slave: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", + bus, cs, xilspi->regs, xilspi->mode, xilspi->freq); writel(SPISSR_RESET_VALUE, &xilspi->regs->srr); @@ -225,7 +174,7 @@ int spi_claim_bus(struct spi_slave *slave) struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); u32 spicr; - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs); writel(SPISSR_OFF, &xilspi->regs->spissr); spicr = XILSPI_SPICR_DFLT_ON; @@ -246,7 +195,7 @@ void spi_release_bus(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs); writel(SPISSR_OFF, &xilspi->regs->spissr); writel(XILSPI_SPICR_DFLT_OFF, &xilspi->regs->spicr); } @@ -262,14 +211,15 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, unsigned rxecount = 17; /* max. 16 elements in FIFO, leftover 1 */ unsigned global_timeout; - debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, - slave->bus, slave->cs, bitlen, bytes, flags); + debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", + slave->bus, slave->cs, bitlen, bytes, flags); + if (bitlen == 0) goto done; if (bitlen % XILSPI_MAX_XFER_BITS) { - printf("XILSPI warning: %s: Not a multiple of %d bits\n", - __func__, XILSPI_MAX_XFER_BITS); + printf("XILSPI warning: Not a multiple of %d bits\n", + XILSPI_MAX_XFER_BITS); flags |= SPI_XFER_END; goto done; } @@ -281,7 +231,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (!rxecount) { - printf("XILSPI error: %s: Rx buffer not empty\n", __func__); + printf("XILSPI error: Rx buffer not empty\n"); return -1; } @@ -296,7 +246,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, unsigned timeout = global_timeout; /* get Tx element from data out buffer and count up */ unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL; - debug("%s: tx:%x ", __func__, d); + debug("spi_xfer: tx:%x ", d); /* write out and wait for processing (receive data) */ writel(d & SPIDTR_8BIT_MASK, &xilspi->regs->spidtr); @@ -307,7 +257,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (!timeout) { - printf("XILSPI error: %s: Xfer timeout\n", __func__); + printf("XILSPI error: Xfer timeout\n"); return -1; } @@ -315,7 +265,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, d = readl(&xilspi->regs->spidrr) & SPIDRR_8BIT_MASK; if (rxp) *rxp++ = d; - debug("rx:%x\n", d); + debug("spi_xfer: rx:%x\n", d); } done: -- 1.9.1