All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3 15/19] drm/i915: atomic plane updates in a nutshell
Date: Mon, 15 Jun 2015 12:33:52 +0200	[thread overview]
Message-ID: <1434364436-6366-16-git-send-email-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <1434364436-6366-1-git-send-email-maarten.lankhorst@linux.intel.com>

Now that all planes are added during a modeset we can use the
calculated changes before disabling a plane, and then either commit
or force disable a plane before disabling the crtc.

The code is shared with atomic_begin/flush, except watermark updating
and vblank evasion are not used.

This is needed for proper atomic suspend/resume support.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90868
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 103 ++++++++---------------------------
 drivers/gpu/drm/i915/intel_sprite.c  |   4 +-
 2 files changed, 23 insertions(+), 84 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cc4ca4970716..beb69281f45c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2217,28 +2217,6 @@ static void intel_disable_pipe(struct intel_crtc *crtc)
 		intel_wait_for_pipe_off(crtc);
 }
 
-/**
- * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
- * @plane:  plane to be enabled
- * @crtc: crtc for the plane
- *
- * Enable @plane on @crtc, making sure that the pipe is running first.
- */
-static void intel_enable_primary_hw_plane(struct drm_plane *plane,
-					  struct drm_crtc *crtc)
-{
-	struct drm_device *dev = plane->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
-	/* If the pipe isn't enabled, we can't pump pixels and may hang */
-	assert_pipe_enabled(dev_priv, intel_crtc->pipe);
-	to_intel_plane_state(plane->state)->visible = true;
-
-	dev_priv->display.update_primary_plane(crtc, plane->fb,
-					       crtc->x, crtc->y);
-}
-
 static bool need_vtd_wa(struct drm_device *dev)
 {
 #ifdef CONFIG_INTEL_IOMMU
@@ -4508,20 +4486,6 @@ static void ironlake_pfit_enable(struct intel_crtc *crtc)
 	}
 }
 
-static void intel_enable_sprite_planes(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
-	struct drm_plane *plane;
-	struct intel_plane *intel_plane;
-
-	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
-		intel_plane = to_intel_plane(plane);
-		if (intel_plane->pipe == pipe)
-			intel_plane_restore(&intel_plane->base);
-	}
-}
-
 void hsw_enable_ips(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -4817,27 +4781,6 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
 		intel_pre_disable_primary(&crtc->base);
 }
 
-static void intel_crtc_enable_planes(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-
-	intel_enable_primary_hw_plane(crtc->primary, crtc);
-	intel_enable_sprite_planes(crtc);
-	if (to_intel_plane_state(crtc->cursor->state)->visible)
-		intel_crtc_update_cursor(crtc, true);
-
-	intel_post_enable_primary(crtc);
-
-	/*
-	 * FIXME: Once we grow proper nuclear flip support out of this we need
-	 * to compute the mask of flip planes precisely. For the time being
-	 * consider this a flip to a NULL plane.
-	 */
-	intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
-}
-
 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
 {
 	struct drm_device *dev = crtc->dev;
@@ -4845,10 +4788,6 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask
 	struct drm_plane *p;
 	int pipe = intel_crtc->pipe;
 
-	intel_crtc_wait_for_pending_flips(crtc);
-
-	intel_pre_disable_primary(crtc);
-
 	intel_crtc_dpms_overlay_disable(intel_crtc);
 
 	drm_for_each_plane_mask(p, dev, plane_mask)
@@ -6270,6 +6209,11 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
+	if (to_intel_plane_state(crtc->primary->state)->visible) {
+		intel_crtc_wait_for_pending_flips(crtc);
+		intel_pre_disable_primary(crtc);
+	}
+
 	intel_crtc_disable_planes(crtc, crtc->state->plane_mask);
 	dev_priv->display.crtc_disable(crtc);
 
@@ -11783,10 +11727,6 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 	if (old_plane_state->base.fb && !fb)
 		intel_crtc->atomic.disabled_planes |= 1 << i;
 
-	/* don't run rest during modeset yet */
-	if (!intel_crtc->active || mode_changed)
-		return 0;
-
 	was_visible = old_plane_state->visible;
 	visible = to_intel_plane_state(plane_state)->visible;
 
@@ -13255,15 +13195,18 @@ static int __intel_set_mode(struct drm_atomic_state *state)
 	drm_atomic_helper_swap_state(dev, state);
 
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
 		if (!needs_modeset(crtc->state))
 			continue;
 
 		any_ms = true;
-		if (!crtc_state->active)
-			continue;
+		intel_pre_plane_update(intel_crtc);
 
-		intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
-		dev_priv->display.crtc_disable(crtc);
+		if (crtc_state->active) {
+			intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
+			dev_priv->display.crtc_disable(crtc);
+		}
 	}
 
 	/* Only after disabling all output pipelines that will be changed can we
@@ -13277,15 +13220,12 @@ static int __intel_set_mode(struct drm_atomic_state *state)
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	for_each_crtc_in_state(state, crtc, crtc_state, i) {
-		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
-
-		if (!needs_modeset(crtc->state) || !crtc->state->active)
-			continue;
-
-		update_scanline_offset(to_intel_crtc(crtc));
+		if (needs_modeset(crtc->state) && crtc->state->active) {
+			update_scanline_offset(to_intel_crtc(crtc));
+			dev_priv->display.crtc_enable(crtc);
+		}
 
-		dev_priv->display.crtc_enable(crtc);
-		intel_crtc_enable_planes(crtc);
+		drm_atomic_helper_commit_planes_on_crtc(crtc_state);
 	}
 
 	/* FIXME: add subpixel order */
@@ -13858,7 +13798,7 @@ intel_commit_primary_plane(struct drm_plane *plane,
 	crtc->x = src->x1 >> 16;
 	crtc->y = src->y1 >> 16;
 
-	if (!intel_crtc->active)
+	if (!crtc->state->active)
 		return;
 
 	if (state->visible)
@@ -13885,7 +13825,8 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 
-	intel_pre_plane_update(intel_crtc);
+	if (!needs_modeset(crtc->state))
+		intel_pre_plane_update(intel_crtc);
 
 	if (intel_crtc->atomic.update_wm)
 		intel_update_watermarks(crtc);
@@ -13893,7 +13834,7 @@ static void intel_begin_crtc_commit(struct drm_crtc *crtc,
 	intel_runtime_pm_get(dev_priv);
 
 	/* Perform vblank evasion around commit operation */
-	if (crtc->state->active && !needs_modeset(crtc->state))
+	if (crtc->state->active)
 		intel_crtc->atomic.evade =
 			intel_pipe_update_start(intel_crtc,
 						&intel_crtc->atomic.start_vbl_count);
@@ -14102,7 +14043,7 @@ intel_commit_cursor_plane(struct drm_plane *plane,
 	intel_crtc->cursor_bo = obj;
 
 update:
-	if (intel_crtc->active)
+	if (crtc->state->active)
 		intel_crtc_update_cursor(crtc, state->visible);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index f7eb3bd0a7c7..168f90f346c2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -921,16 +921,14 @@ intel_commit_sprite_plane(struct drm_plane *plane,
 			  struct intel_plane_state *state)
 {
 	struct drm_crtc *crtc = state->base.crtc;
-	struct intel_crtc *intel_crtc;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 	struct drm_framebuffer *fb = state->base.fb;
 
 	crtc = crtc ? crtc : plane->crtc;
-	intel_crtc = to_intel_crtc(crtc);
 
 	plane->fb = fb;
 
-	if (!intel_crtc->active)
+	if (!crtc->state->active)
 		return;
 
 	if (state->visible) {
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-06-15 10:34 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15 10:33 [PATCH v3 00/19] Convert to atomic, part 3 Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 01/19] drm/i915: Use crtc state in intel_modeset_pipe_config Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 02/19] drm/i915: Clean up intel_atomic_setup_scalers slightly Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 03/19] drm/i915: Add a simple atomic crtc check function, v2 Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 04/19] drm/i915: Move scaler setup to check crtc " Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 05/19] drm/i915: Assign a new pll from the crtc check " Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 06/19] drm/i915: Split skl_update_scaler, v3 Maarten Lankhorst
2015-06-18  1:48   ` Matt Roper
2015-06-18  5:42     ` Maarten Lankhorst
2015-06-18  6:51       ` Daniel Vetter
2015-06-22  7:50         ` [PATCH v3.5 06/19] drm/i915: Split skl_update_scaler, v4 Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 07/19] drm/i915: Split plane updates of crtc->atomic into a helper, v2 Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 08/19] drm/i915: clean up plane commit functions Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 09/19] drm/i915: clean up atomic plane check functions, v2 Maarten Lankhorst
2015-06-18  1:48   ` Matt Roper
2015-06-22  7:23     ` Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 10/19] drm/i915: remove force argument from disable_plane Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 11/19] drm/i915: move detaching scalers to begin_crtc_commit, v2 Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 12/19] drm/i915: Move crtc commit updates to separate functions Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 13/19] drm/i915: Do not run most checks when there's no modeset Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 14/19] drm/i915: Handle disabling planes better, v2 Maarten Lankhorst
2015-06-15 10:33 ` Maarten Lankhorst [this message]
2015-06-18 14:21   ` [PATCH v3 15/19] drm/i915: atomic plane updates in a nutshell Matt Roper
2015-06-19  3:57     ` Maarten Lankhorst
2015-06-18 15:28   ` Ville Syrjälä
2015-06-19  4:01     ` Maarten Lankhorst
2015-06-22  9:49       ` Ville Syrjälä
2015-06-22 10:08         ` Maarten Lankhorst
2015-06-22 12:33           ` Daniel Vetter
2015-06-15 10:33 ` [PATCH v3 16/19] drm/i915: Update less state during modeset Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 17/19] drm/i915: Make setting color key atomic Maarten Lankhorst
2015-06-18 14:21   ` Matt Roper
2015-06-19  4:03     ` Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 18/19] drm/i915: Remove transitional references from intel_plane_atomic_check Maarten Lankhorst
2015-06-18 14:21   ` Matt Roper
2015-06-19  4:05     ` Maarten Lankhorst
2015-06-15 10:33 ` [PATCH v3 19/19] drm/i915: Make cdclk part of the atomic state Maarten Lankhorst
2015-06-19 22:29 ` [PATCH v3 00/19] Convert to atomic, part 3 Matt Roper
2015-06-22 12:31   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434364436-6366-16-git-send-email-maarten.lankhorst@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.