From mboxrd@z Thu Jan 1 00:00:00 1970 From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) Date: Mon, 15 Jun 2015 21:19:59 +0530 Subject: [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <1434383399-2370-13-git-send-email-vaibhav.hiremath@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org With addition of PXA910 family of devices, the TWSI module supports new feature which allows us to adjust SCLK. With DT properties i2c-pxa driver takes input configuration in nsec and converts it to respective bit-fields, - i2c-sclk-low-time-ns : SCLK low time (tlow) This property is used along with mode selection. - i2c-sclk-high-time-ns : SCLK high time (thigh) Signed-off-by: Vaibhav Hiremath --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt index 9657db5..0fafd91 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt @@ -23,12 +23,25 @@ Optional properties : - i2c-disable-after-xfer : If set, driver will disable I2C module after msg xfer and enable it again before xfer. + (Applicable to PXA910 family): + + - i2c-sclk-low-time-ns : SCLK low time (tlow), for standard/fast/high + speed mode. + This property is used along with mode selection. Driver uses this property + to set low/high time for standard and fast speed mode, as counter bit-field + is same for both. + - i2c-sclk-high-time-ns : SCLK high time (thigh), Used in case of high speed + mode. + Examples: twsi1: i2c at d4011000 { compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; + + i2c-sclk-low-time-ns = <988>; + i2c-sclk-high-time-ns = <988>; }; twsi2: i2c at d4025000 { -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vaibhav Hiremath Subject: [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Date: Mon, 15 Jun 2015 21:19:59 +0530 Message-ID: <1434383399-2370-13-git-send-email-vaibhav.hiremath@linaro.org> References: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org> Return-path: In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org, robert.jarzmik-GANU6spQydw@public.gmane.org, Vaibhav Hiremath List-Id: linux-i2c@vger.kernel.org With addition of PXA910 family of devices, the TWSI module supports new feature which allows us to adjust SCLK. With DT properties i2c-pxa driver takes input configuration in nsec and converts it to respective bit-fields, - i2c-sclk-low-time-ns : SCLK low time (tlow) This property is used along with mode selection. - i2c-sclk-high-time-ns : SCLK high time (thigh) Signed-off-by: Vaibhav Hiremath --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt index 9657db5..0fafd91 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt @@ -23,12 +23,25 @@ Optional properties : - i2c-disable-after-xfer : If set, driver will disable I2C module after msg xfer and enable it again before xfer. + (Applicable to PXA910 family): + + - i2c-sclk-low-time-ns : SCLK low time (tlow), for standard/fast/high + speed mode. + This property is used along with mode selection. Driver uses this property + to set low/high time for standard and fast speed mode, as counter bit-field + is same for both. + - i2c-sclk-high-time-ns : SCLK high time (thigh), Used in case of high speed + mode. + Examples: twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; + + i2c-sclk-low-time-ns = <988>; + i2c-sclk-high-time-ns = <988>; }; twsi2: i2c@d4025000 { -- 1.9.1