From: Stephen Hemminger <stephen@networkplumber.org>
To: ameen.rahman@qlogic.com
Cc: dev@dpdk.org, Stephen Hemminger <shemming@brocade.com>
Subject: [PATCH 4/4] bnx2x: enable PMD build
Date: Tue, 16 Jun 2015 16:51:40 -0700 [thread overview]
Message-ID: <1434498700-8522-5-git-send-email-stephen@networkplumber.org> (raw)
In-Reply-To: <1434498700-8522-1-git-send-email-stephen@networkplumber.org>
From: Stephen Hemminger <shemming@brocade.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Qlogic has discussed taking over as maintainer,
if they want to they can submit a patch to change MAINTAINER file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
MAINTAINERS | 3 +++
config/common_linuxapp | 10 +++++++++
drivers/net/Makefile | 1 +
drivers/net/bnx2x/Makefile | 28 +++++++++++++++++++++++
lib/librte_eal/common/include/rte_pci_dev_ids.h | 30 +++++++++++++++++++++++++
mk/rte.app.mk | 2 ++
6 files changed, 74 insertions(+)
create mode 100644 drivers/net/bnx2x/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index 9362c19..3339cbc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -259,6 +259,9 @@ M: John McNamara <john.mcnamara@intel.com>
F: drivers/net/pcap/
F: doc/guides/nics/pcap_ring.rst
+Qlogic/Broadcom bnx2x
+F: drivers/net/bnx2x/
+
Ring PMD
M: Bruce Richardson <bruce.richardson@intel.com>
F: drivers/net/ring/
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 5deb55a..cf30529 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -214,6 +214,16 @@ CONFIG_RTE_LIBRTE_ENIC_PMD=y
CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=y
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+
+#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1e6648a..c265f63 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -45,6 +45,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += ring
DIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio
DIRS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += vmxnet3
DIRS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += xenvirt
+DIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x
include $(RTE_SDK)/mk/rte.sharelib.mk
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/bnx2x/Makefile
new file mode 100644
index 0000000..0de5db9
--- /dev/null
+++ b/drivers/net/bnx2x/Makefile
@@ -0,0 +1,28 @@
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_bnx2x.a
+
+CFLAGS += -O3 -g
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DZLIB_CONST
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_rxtx.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_stats.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += ecore_sp.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += elink.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += bnx2x_vfpf.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNX2X_DEBUG) += debug.c
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += lib/librte_eal lib/librte_ether lib/librte_hash
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += lib/librte_mempool lib/librte_mbuf
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_eal/common/include/rte_pci_dev_ids.h b/lib/librte_eal/common/include/rte_pci_dev_ids.h
index 5d1b285..35429e9 100644
--- a/lib/librte_eal/common/include/rte_pci_dev_ids.h
+++ b/lib/librte_eal/common/include/rte_pci_dev_ids.h
@@ -144,6 +144,14 @@
#define RTE_PCI_DEV_ID_DECL_ENIC(vend, dev)
#endif
+#ifndef RTE_PCI_DEV_ID_DECL_BNX2X
+#define RTE_PCI_DEV_ID_DECL_BNX2X(vend, dev)
+#endif
+
+#ifndef RTE_PCI_DEV_ID_DECL_BNX2XVF
+#define RTE_PCI_DEV_ID_DECL_BNX2XVF(vend, dev)
+#endif
+
#ifndef PCI_VENDOR_ID_INTEL
/** Vendor ID used by Intel devices */
#define PCI_VENDOR_ID_INTEL 0x8086
@@ -164,6 +172,11 @@
#define PCI_VENDOR_ID_CISCO 0x1137
#endif
+#ifndef PCI_VENDOR_ID_BROADCOM
+/** Vendor ID used by Broadcom devices */
+#define PCI_VENDOR_ID_BROADCOM 0x14E4
+#endif
+
/******************** Physical EM devices from e1000_hw.h ********************/
#define E1000_DEV_ID_82542 0x1000
@@ -565,6 +578,21 @@ RTE_PCI_DEV_ID_DECL_FM10KVF(PCI_VENDOR_ID_INTEL, FM10K_DEV_ID_VF)
RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET)
RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
+/****************** Qualcom devices ******************/
+
+/* Broadcom/Qualcom BNX2X */
+#define BNX2X_DEV_ID_57711 0x164F
+#define BNX2X_DEV_ID_57810 0x168E
+#define BNX2X_DEV_ID_57810_MF 0x16AE
+#define BNX2X_DEV_ID_57810_VF 0x16AF
+
+RTE_PCI_DEV_ID_DECL_BNX2X(PCI_VENDOR_ID_BROADCOM, BNX2X_DEV_ID_57711)
+RTE_PCI_DEV_ID_DECL_BNX2X(PCI_VENDOR_ID_BROADCOM, BNX2X_DEV_ID_57810)
+#ifdef RTE_LIBRTE_BNX2X_MF_SUPPORT
+RTE_PCI_DEV_ID_DECL_BNX2X(PCI_VENDOR_ID_BROADCOM, BNX2X_DEV_ID_57810_MF)
+#endif
+RTE_PCI_DEV_ID_DECL_BNX2XVF(PCI_VENDOR_ID_BROADCOM, BNX2X_DEV_ID_57810_VF)
+
/*
* Undef all RTE_PCI_DEV_ID_DECL_* here.
*/
@@ -577,5 +605,7 @@ RTE_PCI_DEV_ID_DECL_ENIC(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_VIC_ENET_VF)
#undef RTE_PCI_DEV_ID_DECL_I40EVF
#undef RTE_PCI_DEV_ID_DECL_VIRTIO
#undef RTE_PCI_DEV_ID_DECL_VMXNET3
+#undef RTE_PCI_DEV_ID_DECL_BNX2X
+#undef RTE_PCI_DEV_ID_DECL_BNX2XVF
#undef RTE_PCI_DEV_ID_DECL_FM10K
#undef RTE_PCI_DEV_ID_DECL_FM10KVF
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 1a2043a..00d2327 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -97,6 +97,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lfuse
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -libverbs
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lz
_LDLIBS-y += --start-group
@@ -132,6 +133,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x
endif # ! $(CONFIG_RTE_BUILD_SHARED_LIB)
--
2.1.4
next prev parent reply other threads:[~2015-06-16 23:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 23:51 [PATCH 0/4 v5] bnx2x: poll mode driver Stephen Hemminger
2015-06-16 23:51 ` [PATCH 1/4] eal: provide functions to access PCI config Stephen Hemminger
2015-06-17 7:31 ` Panu Matilainen
2015-06-17 14:44 ` David Marchand
[not found] ` <513c51e29ab6449c99ae70c77e72566c@BRMWP-EXMB11.corp.brocade.com>
2015-07-09 21:08 ` Stephen Hemminger
2015-06-16 23:51 ` [PATCH 2/4] bnx2x: driver core Stephen Hemminger
2015-06-16 23:51 ` [PATCH 3/4] bnx2x: driver support routines Stephen Hemminger
2015-06-16 23:51 ` Stephen Hemminger [this message]
2015-06-17 11:19 ` [PATCH 4/4] bnx2x: enable PMD build Yotam Rubin
2015-06-26 0:57 ` [PATCH 0/4 v5] bnx2x: poll mode driver Harish Patil
2015-07-02 12:53 ` Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2015-07-08 0:08 [PATCH v3 0/4] " Stephen Hemminger
2015-07-08 0:08 ` [PATCH 4/4] bnx2x: enable PMD build Stephen Hemminger
2015-07-09 18:15 [PATCH v4 0/4] bnx2x: new poll mode driver Stephen Hemminger
2015-07-09 18:15 ` [PATCH 4/4] bnx2x: enable PMD build Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434498700-8522-5-git-send-email-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=ameen.rahman@qlogic.com \
--cc=dev@dpdk.org \
--cc=shemming@brocade.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.