From: Alexander Aring <alex.aring@gmail.com>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, Alexander Aring <alex.aring@gmail.com>
Subject: [PATCH bluetooth-next 1/2] mac802154: iface: fix order while interface up
Date: Wed, 17 Jun 2015 15:35:17 +0200 [thread overview]
Message-ID: <1434548118-25656-1-git-send-email-alex.aring@gmail.com> (raw)
This patch moves the hardware setting before calling the driver start
callback which activates the receive handling. The hardware setup
contains settings like address filtering which should be setup before
activate the receive handling on the transceiver. These setting are
protected by ieee802154_check_concurrent_iface check. This means we
need to set these registers once before calling drv_start and can't
be overwritten by other interfaces.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
net/mac802154/iface.c | 103 +++++++++++++++++++++++++++-----------------------
1 file changed, 55 insertions(+), 48 deletions(-)
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 692731d..0b0cccb 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -135,6 +135,56 @@ static int mac802154_wpan_mac_addr(struct net_device *dev, void *p)
return mac802154_wpan_update_llsec(dev);
}
+static int ieee802154_setup_hw(struct ieee802154_sub_if_data *sdata)
+{
+ struct ieee802154_local *local = sdata->local;
+ struct wpan_dev *wpan_dev = &sdata->wpan_dev;
+ int ret;
+
+ if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
+ ret = drv_set_promiscuous_mode(local,
+ wpan_dev->promiscuous_mode);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (local->hw.flags & IEEE802154_HW_AFILT) {
+ ret = drv_set_pan_id(local, wpan_dev->pan_id);
+ if (ret < 0)
+ return ret;
+
+ ret = drv_set_extended_addr(local, wpan_dev->extended_addr);
+ if (ret < 0)
+ return ret;
+
+ ret = drv_set_short_addr(local, wpan_dev->short_addr);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (local->hw.flags & IEEE802154_HW_LBT) {
+ ret = drv_set_lbt_mode(local, wpan_dev->lbt);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (local->hw.flags & IEEE802154_HW_CSMA_PARAMS) {
+ ret = drv_set_csma_params(local, wpan_dev->min_be,
+ wpan_dev->max_be,
+ wpan_dev->csma_retries);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (local->hw.flags & IEEE802154_HW_FRAME_RETRIES) {
+ ret = drv_set_max_frame_retries(local, wpan_dev->frame_retries);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
static int mac802154_slave_open(struct net_device *dev)
{
struct ieee802154_sub_if_data *sdata = IEEE802154_DEV_TO_SUB_IF(dev);
@@ -146,6 +196,10 @@ static int mac802154_slave_open(struct net_device *dev)
set_bit(SDATA_STATE_RUNNING, &sdata->state);
if (!local->open_count) {
+ res = ieee802154_setup_hw(sdata);
+ if (res)
+ goto err;
+
res = drv_start(local);
if (res)
goto err;
@@ -239,60 +293,13 @@ static int mac802154_wpan_open(struct net_device *dev)
{
int rc;
struct ieee802154_sub_if_data *sdata = IEEE802154_DEV_TO_SUB_IF(dev);
- struct ieee802154_local *local = sdata->local;
struct wpan_dev *wpan_dev = &sdata->wpan_dev;
rc = ieee802154_check_concurrent_iface(sdata, wpan_dev->iftype);
if (rc < 0)
return rc;
- rc = mac802154_slave_open(dev);
- if (rc < 0)
- return rc;
-
- if (local->hw.flags & IEEE802154_HW_PROMISCUOUS) {
- rc = drv_set_promiscuous_mode(local,
- wpan_dev->promiscuous_mode);
- if (rc < 0)
- goto out;
- }
-
- if (local->hw.flags & IEEE802154_HW_AFILT) {
- rc = drv_set_pan_id(local, wpan_dev->pan_id);
- if (rc < 0)
- goto out;
-
- rc = drv_set_extended_addr(local, wpan_dev->extended_addr);
- if (rc < 0)
- goto out;
-
- rc = drv_set_short_addr(local, wpan_dev->short_addr);
- if (rc < 0)
- goto out;
- }
-
- if (local->hw.flags & IEEE802154_HW_LBT) {
- rc = drv_set_lbt_mode(local, wpan_dev->lbt);
- if (rc < 0)
- goto out;
- }
-
- if (local->hw.flags & IEEE802154_HW_CSMA_PARAMS) {
- rc = drv_set_csma_params(local, wpan_dev->min_be,
- wpan_dev->max_be,
- wpan_dev->csma_retries);
- if (rc < 0)
- goto out;
- }
-
- if (local->hw.flags & IEEE802154_HW_FRAME_RETRIES) {
- rc = drv_set_max_frame_retries(local, wpan_dev->frame_retries);
- if (rc < 0)
- goto out;
- }
-
-out:
- return rc;
+ return mac802154_slave_open(dev);
}
static int mac802154_slave_close(struct net_device *dev)
--
2.4.1
next reply other threads:[~2015-06-17 13:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 13:35 Alexander Aring [this message]
2015-06-17 13:35 ` [PATCH bluetooth-next 2/2] mac802154: iface: cleanup stack variable Alexander Aring
2015-06-17 14:02 ` Marcel Holtmann
2015-06-17 14:01 ` [PATCH bluetooth-next 1/2] mac802154: iface: fix order while interface up Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434548118-25656-1-git-send-email-alex.aring@gmail.com \
--to=alex.aring@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-wpan@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.