From: Sergey Fedorov <serge.fdrv@gmail.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Sergey Fedorov <serge.fdrv@gmail.com>
Subject: [Qemu-devel] [PATCH] target-arm: Do not reset sysregs marked as ALIAS
Date: Wed, 17 Jun 2015 18:25:13 +0300 [thread overview]
Message-ID: <1434554713-10220-1-git-send-email-serge.fdrv@gmail.com> (raw)
cp_reg_reset() is called from g_hash_table_foreach() which does not
define a specific ordering of the hash table iteration. Thus doing reset
for registers marked as ALIAS would give an ambiguous result when
resetvalue is different for original and alias resisters. Exit
cp_reg_reset() early when passed an alias register. Then clean up alias
register definitions from needless resetvalue and resetfn.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
---
target-arm/cpu.c | 2 +-
target-arm/cpu.h | 4 ++--
target-arm/helper.c | 28 +++++++++-------------------
3 files changed, 12 insertions(+), 22 deletions(-)
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index 7496983..4bb821b 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -55,7 +55,7 @@ static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
ARMCPRegInfo *ri = value;
ARMCPU *cpu = opaque;
- if (ri->type & ARM_CP_SPECIAL) {
+ if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS)) {
return;
}
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index c9d2330..2f59058 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -1116,8 +1116,8 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid)
* old must have the OVERRIDE bit set.
* ALIAS indicates that this register is an alias view of some underlying
* state which is also visible via another register, and that the other
- * register is handling migration; registers marked ALIAS will not be migrated
- * but may have their state set by syncing of register state from KVM.
+ * register is handling migration and reset; registers marked ALIAS will not be
+ * migrated but may have their state set by syncing of register state from KVM.
* NO_RAW indicates that this register has no underlying state and does not
* support raw access for state saving/loading; it will not be used for either
* migration or KVM state synchronization. (Typically this is for "registers"
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 00509b1..fbf20b6 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -984,7 +984,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
{ .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .type = ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
- .resetvalue = 0, .writefn = pmintenclr_write, },
+ .writefn = pmintenclr_write, },
{ .name = "VBAR", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .writefn = vbar_write,
@@ -1323,7 +1323,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.type = ARM_CP_ALIAS,
.access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access,
.fieldoffset = offsetoflow32(CPUARMState, cp15.c14_cntfrq),
- .resetfn = arm_cp_reset_ignore,
},
{ .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0,
@@ -1344,7 +1343,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.accessfn = gt_ptimer_access,
.fieldoffset = offsetoflow32(CPUARMState,
cp15.c14_timer[GTIMER_PHYS].ctl),
- .resetfn = arm_cp_reset_ignore,
.writefn = gt_ctl_write, .raw_writefn = raw_write,
},
{ .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1360,7 +1358,6 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.accessfn = gt_vtimer_access,
.fieldoffset = offsetoflow32(CPUARMState,
cp15.c14_timer[GTIMER_VIRT].ctl),
- .resetfn = arm_cp_reset_ignore,
.writefn = gt_ctl_write, .raw_writefn = raw_write,
},
{ .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1422,7 +1419,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.access = PL1_RW | PL0_R,
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
- .accessfn = gt_ptimer_access, .resetfn = arm_cp_reset_ignore,
+ .accessfn = gt_ptimer_access,
.writefn = gt_cval_write, .raw_writefn = raw_write,
},
{ .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1437,7 +1434,7 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
.access = PL1_RW | PL0_R,
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
- .accessfn = gt_vtimer_access, .resetfn = arm_cp_reset_ignore,
+ .accessfn = gt_vtimer_access,
.writefn = gt_cval_write, .raw_writefn = raw_write,
},
{ .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64,
@@ -1714,12 +1711,10 @@ static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
{ .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .type = ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap),
- .resetvalue = 0,
.readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
{ .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
.access = PL1_RW, .type = ARM_CP_ALIAS,
.fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap),
- .resetvalue = 0,
.readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
{ .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW,
@@ -1851,8 +1846,7 @@ static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = {
{ .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
.access = PL1_RW, .type = ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s),
- offsetoflow32(CPUARMState, cp15.dfsr_ns) },
- .resetfn = arm_cp_reset_ignore, },
+ offsetoflow32(CPUARMState, cp15.dfsr_ns) }, },
{ .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
.access = PL1_RW, .resetvalue = 0,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s),
@@ -1890,7 +1884,7 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) },
{ .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write,
- .resetfn = arm_cp_reset_ignore, .raw_writefn = vmsa_ttbcr_raw_write,
+ .raw_writefn = vmsa_ttbcr_raw_write,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tcr_el[3]),
offsetoflow32(CPUARMState, cp15.tcr_el[1])} },
REGINFO_SENTINEL
@@ -2109,12 +2103,12 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) },
- .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
+ .writefn = vmsa_ttbr_write, },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) },
- .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
+ .writefn = vmsa_ttbr_write, },
REGINFO_SENTINEL
};
@@ -2641,7 +2635,6 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
{ .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
- .resetvalue = 0,
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
{ .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0,
@@ -2666,7 +2659,7 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
{ .name = "SCR", .type = ARM_CP_ALIAS,
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
- .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
+ .writefn = scr_write },
{ .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
.access = PL3_RW, .resetvalue = 0,
@@ -2761,8 +2754,7 @@ static const ARMCPRegInfo debug_cp_reginfo[] = {
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0,
.type = ARM_CP_ALIAS,
.access = PL1_R,
- .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1),
- .resetfn = arm_cp_reset_ignore },
+ .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), },
/* We define a dummy WI OSLAR_EL1, because Linux writes to it. */
{ .name = "OSLAR_EL1", .state = ARM_CP_STATE_BOTH,
.cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 4,
@@ -3721,14 +3713,12 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
if ((r->state == ARM_CP_STATE_BOTH && ns) ||
(arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) {
r2->type |= ARM_CP_ALIAS;
- r2->resetfn = arm_cp_reset_ignore;
}
} else if ((secstate != r->secure) && !ns) {
/* The register is not banked so we only want to allow migration of
* the non-secure instance.
*/
r2->type |= ARM_CP_ALIAS;
- r2->resetfn = arm_cp_reset_ignore;
}
if (r->state == ARM_CP_STATE_BOTH) {
--
1.9.1
next reply other threads:[~2015-06-17 15:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 15:25 Sergey Fedorov [this message]
2015-06-18 20:46 ` [Qemu-devel] [PATCH] target-arm: Do not reset sysregs marked as ALIAS Peter Maydell
2015-06-18 20:57 ` Sergey Fedorov
2015-06-18 21:01 ` Peter Maydell
2015-06-18 21:03 ` Sergey Fedorov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434554713-10220-1-git-send-email-serge.fdrv@gmail.com \
--to=serge.fdrv@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.