From mboxrd@z Thu Jan 1 00:00:00 1970 From: aisheng.dong@freescale.com (Dong Aisheng) Date: Thu, 18 Jun 2015 02:05:33 +0800 Subject: [PATCH 2/6] mmc: sdhci-esdhc-imx: move all non dt probe code into one function In-Reply-To: <1434564337-24720-1-git-send-email-aisheng.dong@freescale.com> References: <1434564337-24720-1-git-send-email-aisheng.dong@freescale.com> Message-ID: <1434564337-24720-3-git-send-email-aisheng.dong@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This is an incremental fix of commit e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards"). After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width again for dt platform since those are already handled by mmc_of_parse(). Current code only exclude the checking of wp_type for dt platform which does not make sense. This patch moves all non dt probe code into one function. Besides, since we only support SD3.0/eMMC HS200 for dt platform, the support_vsel checking and ultra high speed pinctrl state are also merged into sdhci_esdhc_imx_probe_dt. Then we have two separately probe function for dt and non dt type. This can make the driver probe more clearly. Signed-off-by: Dong Aisheng --- drivers/mmc/host/sdhci-esdhc-imx.c | 179 +++++++++++++++++++------------------ 1 file changed, 94 insertions(+), 85 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4815391..10f03ee 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -878,14 +878,12 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { static int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { struct device_node *np = pdev->dev.of_node; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; int ret; - if (!np) - return -ENODEV; - if (of_get_property(np, "non-removable", NULL)) boarddata->cd_type = ESDHC_CD_PERMANENT; @@ -917,6 +915,26 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, mmc_of_parse_voltage(np, &host->ocr_mask); + /* sdr50 and sdr104 needs work on 1.8v signal voltage */ + if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && + !IS_ERR(imx_data->pins_default)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + if (IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) { + dev_warn(mmc_dev(host->mmc), + "could not get ultra high speed state, work on normal mode\n"); + /* + * fall back to not support uhs by specify no 1.8v quirk + */ + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + } else { + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + /* call to generic mmc_of_parse to support additional capabilities */ ret = mmc_of_parse(host->mmc); if (ret) @@ -931,22 +949,85 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, static inline int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { return -ENODEV; } #endif +static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, + struct sdhci_host *host, + struct pltfm_imx_data *imx_data) +{ + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + int err; + + if (!host->mmc->parent->platform_data) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + return -EINVAL; + } + + imx_data->boarddata = *((struct esdhc_platform_data *) + host->mmc->parent->platform_data); + /* write_protect */ + if (boarddata->wp_type == ESDHC_WP_GPIO) { + err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request write-protect gpio!\n"); + return err; + } + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } + + /* card_detect */ + switch (boarddata->cd_type) { + case ESDHC_CD_GPIO: + err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request card-detect gpio!\n"); + return err; + } + /* fall through */ + + case ESDHC_CD_CONTROLLER: + /* we have a working card_detect back */ + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + break; + + case ESDHC_CD_PERMANENT: + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + break; + + case ESDHC_CD_NONE: + break; + } + + switch (boarddata->max_bus_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; + break; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + default: + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + break; + } + + return 0; +} + static int sdhci_esdhc_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(imx_esdhc_dt_ids, &pdev->dev); struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; - struct esdhc_platform_data *boarddata; int err; struct pltfm_imx_data *imx_data; - bool dt = true; host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0); if (IS_ERR(host)) @@ -1038,84 +1119,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536) host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; - boarddata = &imx_data->boarddata; - if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) { - if (!host->mmc->parent->platform_data) { - dev_err(mmc_dev(host->mmc), "no board data!\n"); - err = -EINVAL; - goto disable_clk; - } - imx_data->boarddata = *((struct esdhc_platform_data *) - host->mmc->parent->platform_data); - dt = false; - } - /* write_protect */ - if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) { - err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request write-protect gpio!\n"); - goto disable_clk; - } - host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - } - - /* card_detect */ - switch (boarddata->cd_type) { - case ESDHC_CD_GPIO: - if (dt) - break; - err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request card-detect gpio!\n"); - goto disable_clk; - } - /* fall through */ - - case ESDHC_CD_CONTROLLER: - /* we have a working card_detect back */ - host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; - break; - - case ESDHC_CD_PERMANENT: - host->mmc->caps |= MMC_CAP_NONREMOVABLE; - break; - - case ESDHC_CD_NONE: - break; - } - - switch (boarddata->max_bus_width) { - case 8: - host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; - break; - case 4: - host->mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 1: - default: - host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; - break; - } - - /* sdr50 and sdr104 needs work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && - !IS_ERR(imx_data->pins_default)) { - imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_100MHZ); - imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_200MHZ); - if (IS_ERR(imx_data->pins_100mhz) || - IS_ERR(imx_data->pins_200mhz)) { - dev_warn(mmc_dev(host->mmc), - "could not get ultra high speed state, work on normal mode\n"); - /* fall back to not support uhs by specify no 1.8v quirk */ - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } - } else { - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } + if (of_id) + err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); + else + err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data); + if (err) + goto disable_clk; err = sdhci_add_host(host); if (err) -- 1.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dong Aisheng Subject: [PATCH 2/6] mmc: sdhci-esdhc-imx: move all non dt probe code into one function Date: Thu, 18 Jun 2015 02:05:33 +0800 Message-ID: <1434564337-24720-3-git-send-email-aisheng.dong@freescale.com> References: <1434564337-24720-1-git-send-email-aisheng.dong@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from mail-bl2on0128.outbound.protection.outlook.com ([65.55.169.128]:30592 "EHLO na01-bl2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757836AbbFQSIH (ORCPT ); Wed, 17 Jun 2015 14:08:07 -0400 In-Reply-To: <1434564337-24720-1-git-send-email-aisheng.dong@freescale.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: linux-mmc@vger.kernel.org Cc: ulf.hansson@linaro.org, chris@printf.net, shawn.guo@linaro.org, b29396@freescale.com, fabio.estevam@freescale.com, gwenhael.goavec-merou@armadeus.com, marex@denx.de, s.trumtrar@pengutronix.de, s.hauer@pengutronix.de, lisovy@gmail.com, ipaton0@gmail.com, smoch@web.de, hs@denx.de, rmk+kernel@arm.linux.org.uk, tharvey@gateworks.com, rabeeh@solid-run.com, troy.kisky@boundarydevices.com, p.zabel@pengutronix.de, robertcnelson@gmail.com, LW@KARO-electronics.de, linux-arm-kernel@lists.infradead.org This is an incremental fix of commit e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards"). After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"), we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width again for dt platform since those are already handled by mmc_of_parse(). Current code only exclude the checking of wp_type for dt platform which does not make sense. This patch moves all non dt probe code into one function. Besides, since we only support SD3.0/eMMC HS200 for dt platform, the support_vsel checking and ultra high speed pinctrl state are also merged into sdhci_esdhc_imx_probe_dt. Then we have two separately probe function for dt and non dt type. This can make the driver probe more clearly. Signed-off-by: Dong Aisheng --- drivers/mmc/host/sdhci-esdhc-imx.c | 179 +++++++++++++++++++------------------ 1 file changed, 94 insertions(+), 85 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4815391..10f03ee 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -878,14 +878,12 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { static int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { struct device_node *np = pdev->dev.of_node; + struct esdhc_platform_data *boarddata = &imx_data->boarddata; int ret; - if (!np) - return -ENODEV; - if (of_get_property(np, "non-removable", NULL)) boarddata->cd_type = ESDHC_CD_PERMANENT; @@ -917,6 +915,26 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, mmc_of_parse_voltage(np, &host->ocr_mask); + /* sdr50 and sdr104 needs work on 1.8v signal voltage */ + if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && + !IS_ERR(imx_data->pins_default)) { + imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_100MHZ); + imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, + ESDHC_PINCTRL_STATE_200MHZ); + if (IS_ERR(imx_data->pins_100mhz) || + IS_ERR(imx_data->pins_200mhz)) { + dev_warn(mmc_dev(host->mmc), + "could not get ultra high speed state, work on normal mode\n"); + /* + * fall back to not support uhs by specify no 1.8v quirk + */ + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + } else { + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; + } + /* call to generic mmc_of_parse to support additional capabilities */ ret = mmc_of_parse(host->mmc); if (ret) @@ -931,22 +949,85 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, static inline int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, struct sdhci_host *host, - struct esdhc_platform_data *boarddata) + struct pltfm_imx_data *imx_data) { return -ENODEV; } #endif +static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, + struct sdhci_host *host, + struct pltfm_imx_data *imx_data) +{ + struct esdhc_platform_data *boarddata = &imx_data->boarddata; + int err; + + if (!host->mmc->parent->platform_data) { + dev_err(mmc_dev(host->mmc), "no board data!\n"); + return -EINVAL; + } + + imx_data->boarddata = *((struct esdhc_platform_data *) + host->mmc->parent->platform_data); + /* write_protect */ + if (boarddata->wp_type == ESDHC_WP_GPIO) { + err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request write-protect gpio!\n"); + return err; + } + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + } + + /* card_detect */ + switch (boarddata->cd_type) { + case ESDHC_CD_GPIO: + err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); + if (err) { + dev_err(mmc_dev(host->mmc), + "failed to request card-detect gpio!\n"); + return err; + } + /* fall through */ + + case ESDHC_CD_CONTROLLER: + /* we have a working card_detect back */ + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + break; + + case ESDHC_CD_PERMANENT: + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + break; + + case ESDHC_CD_NONE: + break; + } + + switch (boarddata->max_bus_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; + break; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + default: + host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; + break; + } + + return 0; +} + static int sdhci_esdhc_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(imx_esdhc_dt_ids, &pdev->dev); struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; - struct esdhc_platform_data *boarddata; int err; struct pltfm_imx_data *imx_data; - bool dt = true; host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0); if (IS_ERR(host)) @@ -1038,84 +1119,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536) host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; - boarddata = &imx_data->boarddata; - if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) { - if (!host->mmc->parent->platform_data) { - dev_err(mmc_dev(host->mmc), "no board data!\n"); - err = -EINVAL; - goto disable_clk; - } - imx_data->boarddata = *((struct esdhc_platform_data *) - host->mmc->parent->platform_data); - dt = false; - } - /* write_protect */ - if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) { - err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request write-protect gpio!\n"); - goto disable_clk; - } - host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - } - - /* card_detect */ - switch (boarddata->cd_type) { - case ESDHC_CD_GPIO: - if (dt) - break; - err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0); - if (err) { - dev_err(mmc_dev(host->mmc), - "failed to request card-detect gpio!\n"); - goto disable_clk; - } - /* fall through */ - - case ESDHC_CD_CONTROLLER: - /* we have a working card_detect back */ - host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; - break; - - case ESDHC_CD_PERMANENT: - host->mmc->caps |= MMC_CAP_NONREMOVABLE; - break; - - case ESDHC_CD_NONE: - break; - } - - switch (boarddata->max_bus_width) { - case 8: - host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; - break; - case 4: - host->mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 1: - default: - host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; - break; - } - - /* sdr50 and sdr104 needs work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && - !IS_ERR(imx_data->pins_default)) { - imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_100MHZ); - imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, - ESDHC_PINCTRL_STATE_200MHZ); - if (IS_ERR(imx_data->pins_100mhz) || - IS_ERR(imx_data->pins_200mhz)) { - dev_warn(mmc_dev(host->mmc), - "could not get ultra high speed state, work on normal mode\n"); - /* fall back to not support uhs by specify no 1.8v quirk */ - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } - } else { - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } + if (of_id) + err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); + else + err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data); + if (err) + goto disable_clk; err = sdhci_add_host(host); if (err) -- 1.9.1