From: Ilya Faenson <ifaenson@broadcom.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: <linux-bluetooth@vger.kernel.org>,
Arend van Spriel <arend@broadcom.com>,
Ilya Faenson <ifaenson@broadcom.com>
Subject: [PATCH v4 3/4] btbcm_uart: Broadcom UART Platform Driver
Date: Wed, 17 Jun 2015 17:30:57 -0400 [thread overview]
Message-ID: <1434576658-20730-4-git-send-email-ifaenson@broadcom.com> (raw)
In-Reply-To: <1434576658-20730-1-git-send-email-ifaenson@broadcom.com>
Introduce the device tree enumerated Broadcom Bluetooth UART driver:
Retrieves the device parameters from the node
Manages the device's power on/off and suspend/resume GPIOs
Processes wakeup interrupts
Maintains the list of bluetooth UART devices
Maps device instances to BlueZ protocol instances
Manages the device upon platform suspend/resume actions
Provides the interface for the BlueZ protocol actions
Signed-off-by: Ilya Faenson <ifaenson@broadcom.com>
---
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btbcm_uart.c | 538 +++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btbcm_uart.h | 74 ++++++
3 files changed, 613 insertions(+)
create mode 100644 drivers/bluetooth/btbcm_uart.c
create mode 100644 drivers/bluetooth/btbcm_uart.h
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index f40e194..7947abb 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
+obj-$(CONFIG_BT_BCM) += btbcm_uart.o
obj-$(CONFIG_BT_RTL) += btrtl.o
btmrvl-y := btmrvl_main.o
diff --git a/drivers/bluetooth/btbcm_uart.c b/drivers/bluetooth/btbcm_uart.c
new file mode 100644
index 0000000..e77eb1d
--- /dev/null
+++ b/drivers/bluetooth/btbcm_uart.c
@@ -0,0 +1,538 @@
+/*
+ * Bluetooth BCM UART Driver
+ *
+ * Copyright (c) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include "btbcm_uart.h"
+
+/* Device context */
+struct bcm_device {
+ struct list_head list;
+
+ struct platform_device *pdev;
+ struct gpio_desc *bt_wake_gpio;
+ struct gpio_desc *dev_wake_gpio;
+ struct gpio_desc *reg_on_gpio;
+ int bt_wake_irq;
+ int dev_wake_active_low;
+ int reg_on_active_low;
+ int bt_wake_active_low;
+ bool configure_sleep;
+ u32 idle_timeout;
+ u32 manual_fc;
+ u32 oper_speed;
+ bool configure_audio;
+ u32 pcm_clockmode;
+ u32 pcm_fillmethod;
+ u32 pcm_fillnum;
+ u32 pcm_fillvalue;
+ u32 pcm_incallbitclock;
+ u32 pcm_lsbfirst;
+ u32 pcm_rightjustify;
+ u32 pcm_routing;
+ u32 pcm_shortframesync;
+ u32 pcm_syncmode;
+
+ char tty_name[64];
+
+ struct btbcm_uart_callbacks callbacks;
+ struct work_struct wakeup_work;
+};
+
+/* List of BCM BT UART devices */
+static DEFINE_SPINLOCK(device_list_lock);
+static LIST_HEAD(device_list);
+
+/* Calling the BCM protocol at lower execution priority */
+static void bcm_wakeup_task(struct work_struct *work)
+{
+ struct bcm_device *dev = container_of(work, struct bcm_device,
+ wakeup_work);
+ int gpio_value;
+
+ /* Make sure the device is resumed */
+ gpio_value = !dev->dev_wake_active_low;
+ if (dev->dev_wake_gpio) {
+ gpiod_set_value(dev->dev_wake_gpio, gpio_value);
+ BT_DBG("wakeup_task - resume %d written, delaying 15 ms",
+ gpio_value);
+ mdelay(15);
+ }
+
+ /* Let the protocol know it's time to wake up */
+ if (dev->callbacks.wakeup)
+ dev->callbacks.wakeup(dev->callbacks.context);
+}
+
+/* Interrupt routine for the wake from the device */
+static irqreturn_t bcm_uart_isr(int irq, void *context)
+{
+ unsigned int bt_wake;
+ struct bcm_device *p = (struct bcm_device *)context;
+
+ bt_wake = gpiod_get_value(p->bt_wake_gpio);
+ BT_DBG("isr with bt_wake of %d (active_low %d), req bh",
+ bt_wake, p->bt_wake_active_low);
+
+ /* Defer the actual processing to the platform work queue */
+ schedule_work(&p->wakeup_work);
+ return IRQ_HANDLED;
+}
+
+/* Device instance startup */
+static int bcm_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const char *tty_name;
+ int ret;
+ struct bcm_device *dev;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->pdev = pdev;
+
+ /* Get dev wake GPIO */
+ dev->dev_wake_gpio = gpiod_get(&pdev->dev, "bt-wake");
+ if (IS_ERR(dev->dev_wake_gpio)) {
+ ret = PTR_ERR(dev->dev_wake_gpio);
+ if (ret != -ENOENT)
+ dev_err(&pdev->dev, "probe - dev_wake GPIO: %d\n", ret);
+ dev->dev_wake_gpio = NULL;
+ } else {
+ int gpio_value;
+
+ dev->dev_wake_active_low = gpiod_is_active_low
+ (dev->dev_wake_gpio);
+ BT_DBG("probe - dev_wake %p a-low is %d (cans %d)",
+ dev->dev_wake_gpio, dev->dev_wake_active_low,
+ gpiod_cansleep(dev->dev_wake_gpio));
+
+ /* configure dev_wake as output with init resumed state */
+ gpio_value = !dev->dev_wake_active_low;
+ ret = gpiod_direction_output(dev->dev_wake_gpio, gpio_value);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "probe - output dev_wake GPIO: %d\n", ret);
+ gpiod_put(dev->dev_wake_gpio);
+ dev->dev_wake_gpio = NULL;
+ goto end;
+ }
+ }
+
+ /* Get power on/off GPIO */
+ dev->reg_on_gpio = gpiod_get(&pdev->dev, "bt-reg-on");
+ if (IS_ERR(dev->reg_on_gpio)) {
+ ret = PTR_ERR(dev->reg_on_gpio);
+ if (ret != -ENOENT)
+ dev_err(&pdev->dev, "probe - reg_on GPIO: %d\n", ret);
+ dev->reg_on_gpio = NULL;
+ } else {
+ int poweron_flag;
+
+ dev->reg_on_active_low = gpiod_is_active_low(dev->reg_on_gpio);
+ BT_DBG("probe - reg_on %p a-low is %d (cansleep %d)",
+ dev->reg_on_gpio, dev->reg_on_active_low,
+ gpiod_cansleep(dev->reg_on_gpio));
+
+ /* configure reg_on as output with init on state */
+ poweron_flag = !dev->reg_on_active_low;
+ ret = gpiod_direction_output(dev->reg_on_gpio, poweron_flag);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "probe - set reg_on GPIO: %d\n", ret);
+ gpiod_put(dev->reg_on_gpio);
+ dev->reg_on_gpio = NULL;
+ }
+ }
+
+ platform_set_drvdata(pdev, dev);
+ /* Must be done before interrupt is requested */
+ INIT_WORK(&dev->wakeup_work, bcm_wakeup_task);
+
+ /* Get bt host wake GPIO */
+ dev->bt_wake_gpio = gpiod_get(&pdev->dev, "bt-host-wake");
+ if (IS_ERR(dev->bt_wake_gpio)) {
+ ret = PTR_ERR(dev->bt_wake_gpio);
+ if (ret != -ENOENT)
+ dev_err(&pdev->dev, "probe - bt_wake GPIO: %d\n", ret);
+ dev->bt_wake_gpio = NULL;
+ } else {
+ /* configure bt_wake as input */
+ ret = gpiod_direction_input(dev->bt_wake_gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "probe - set bt_wake GPIO: %d\n", ret);
+ gpiod_put(dev->bt_wake_gpio);
+ dev->bt_wake_gpio = NULL;
+ } else {
+ dev->bt_wake_active_low = gpiod_is_active_low
+ (dev->bt_wake_gpio);
+ BT_DBG("probe - bt_wake %p a-low is %d(cansleep %d)",
+ dev->bt_wake_gpio, dev->bt_wake_active_low,
+ gpiod_cansleep(dev->bt_wake_gpio));
+ dev->bt_wake_irq = gpiod_to_irq(dev->bt_wake_gpio);
+ if (dev->bt_wake_irq >= 0) {
+ unsigned long intflags = IRQF_TRIGGER_RISING;
+
+ if (dev->bt_wake_active_low)
+ intflags = IRQF_TRIGGER_FALLING;
+ ret = request_irq(dev->bt_wake_irq,
+ bcm_uart_isr, intflags,
+ "bt_host_wake", dev);
+ if (ret < 0)
+ dev_err(&pdev->dev,
+ "probe - failed IRQ %d: %d",
+ dev->bt_wake_irq, ret);
+ else
+ BT_DBG("probe - IRQ %d",
+ dev->bt_wake_irq);
+ }
+ }
+ }
+
+ dev->configure_sleep = of_property_read_bool(np, "configure-sleep");
+ dev->idle_timeout = 5;
+ of_property_read_u32(np, "idle-timeout", &dev->idle_timeout);
+ dev->manual_fc = 0;
+ of_property_read_u32(np, "manual-fc", &dev->manual_fc);
+ dev->oper_speed = 3000000;
+ of_property_read_u32(np, "oper-speed", &dev->oper_speed);
+ dev->configure_audio = of_property_read_bool(np, "configure-audio");
+ BT_DBG("conf-sleep %d, tout %d, manual-fc %d, speed %d, conf-audio %d",
+ dev->configure_sleep, dev->idle_timeout, dev->manual_fc,
+ dev->oper_speed, dev->configure_audio);
+
+ if (dev->configure_audio) {
+ /* Defaults for audio */
+ dev->pcm_clockmode = 0;
+ dev->pcm_fillmethod = 2;
+ dev->pcm_fillnum = 0;
+ dev->pcm_fillvalue = 3;
+ dev->pcm_incallbitclock = 0;
+ dev->pcm_lsbfirst = 0;
+ dev->pcm_rightjustify = 0;
+ dev->pcm_routing = 0;
+ dev->pcm_shortframesync = 0;
+ dev->pcm_syncmode = 0;
+
+ of_property_read_u32(np, "pcm-clockmode", &dev->pcm_clockmode);
+ of_property_read_u32(np, "pcm-fillmethod",
+ &dev->pcm_fillmethod);
+ of_property_read_u32(np, "pcm-fillnum", &dev->pcm_fillnum);
+ of_property_read_u32(np, "pcm-fillvalue", &dev->pcm_fillvalue);
+ of_property_read_u32(np, "pcm-incallbitclock",
+ &dev->pcm_incallbitclock);
+ BT_DBG("pcm-clockmode %d, method %d, num %d, value %d, bit %d",
+ dev->pcm_clockmode, dev->pcm_fillmethod,
+ dev->pcm_fillnum, dev->pcm_fillvalue,
+ dev->pcm_incallbitclock);
+
+ of_property_read_u32(np, "pcm-lsbfirst", &dev->pcm_lsbfirst);
+ of_property_read_u32(np, "pcm-rightjustify",
+ &dev->pcm_rightjustify);
+ of_property_read_u32(np, "pcm-routing", &dev->pcm_routing);
+ of_property_read_u32(np, "pcm-shortframesync",
+ &dev->pcm_shortframesync);
+ of_property_read_u32(np, "pcm-syncmode", &dev->pcm_syncmode);
+ BT_DBG("pcm-lsb %d, right %d, routing %d, short %d, sync %d",
+ dev->pcm_lsbfirst, dev->pcm_rightjustify,
+ dev->pcm_routing, dev->pcm_shortframesync,
+ dev->pcm_syncmode);
+ }
+
+ if (!of_property_read_string(np, "tty", &tty_name)) {
+ strcpy(dev->tty_name, tty_name);
+ BT_DBG("tty name read as %s", dev->tty_name);
+ }
+
+ ret = 0; /* If we made it here, we're fine */
+
+ /* Place this instance on the device list */
+ spin_lock(&device_list_lock);
+ list_add_tail(&dev->list, &device_list);
+ spin_unlock(&device_list_lock);
+
+end:
+ if (ret) {
+ if (dev->reg_on_gpio) {
+ gpiod_put(dev->reg_on_gpio);
+ dev->reg_on_gpio = NULL;
+ }
+ if (dev->bt_wake_gpio) {
+ gpiod_put(dev->bt_wake_gpio);
+ dev->bt_wake_gpio = NULL;
+ }
+ if (dev->dev_wake_gpio) {
+ gpiod_put(dev->dev_wake_gpio);
+ dev->dev_wake_gpio = NULL;
+ }
+ }
+
+ return ret;
+}
+
+/* Device instance removal */
+static int bcm_uart_remove(struct platform_device *pdev)
+{
+ struct bcm_device *dev = platform_get_drvdata(pdev);
+
+ spin_lock(&device_list_lock);
+ list_del(&dev->list);
+ spin_unlock(&device_list_lock);
+
+ BT_DBG("remove %p - freeing interrupt %d", dev, dev->bt_wake_irq);
+ free_irq(dev->bt_wake_irq, dev);
+
+ if (dev->reg_on_gpio) {
+ BT_DBG("remove - releasing reg_on_gpio");
+ gpiod_put(dev->reg_on_gpio);
+ dev->reg_on_gpio = NULL;
+ }
+
+ if (dev->dev_wake_gpio) {
+ BT_DBG("remove - releasing dev_wake_gpio");
+ gpiod_put(dev->dev_wake_gpio);
+ dev->dev_wake_gpio = NULL;
+ }
+
+ if (dev->bt_wake_gpio) {
+ BT_DBG("remove - releasing bt_wake_gpio");
+ gpiod_put(dev->bt_wake_gpio);
+ dev->bt_wake_gpio = NULL;
+ }
+
+ BT_DBG("remove - %p done", dev);
+ return 0;
+}
+
+/* Platform resume callback */
+static int bcm_uart_resume(struct device *pdev)
+{
+ struct bcm_device *dev = platform_get_drvdata(
+ to_platform_device(pdev));
+ int gpio_value;
+
+ BT_DBG("resume %p", dev);
+
+ gpio_value = !dev->dev_wake_active_low;
+ if (dev->dev_wake_gpio) {
+ gpiod_set_value(dev->dev_wake_gpio, gpio_value);
+ BT_DBG("resume - %d written, delaying 15 ms", gpio_value);
+ mdelay(15);
+ }
+
+ /* Let the protocol know the platform is resuming */
+ if (dev->callbacks.resume)
+ dev->callbacks.resume(dev->callbacks.context);
+
+ return 0;
+}
+
+/* Platform suspend callback */
+static int bcm_uart_suspend(struct device *pdev)
+{
+ struct bcm_device *dev = platform_get_drvdata(
+ to_platform_device(pdev));
+ int gpio_value;
+
+ BT_DBG("suspend - %p", dev);
+
+ /* Let the protocol know the platform is suspending */
+ if (dev->callbacks.suspend)
+ dev->callbacks.suspend(dev->callbacks.context);
+
+ /* Suspend the device */
+ if (dev->dev_wake_gpio) {
+ gpio_value = !!dev->dev_wake_active_low;
+ gpiod_set_value(dev->dev_wake_gpio, gpio_value);
+ BT_DBG("suspend - %d written, delaying 15 ms", gpio_value);
+ mdelay(15);
+ }
+
+ return 0;
+}
+
+/* Entry point for calls from the protocol */
+void *btbcm_uart_set_callbacks(struct btbcm_uart_callbacks *pc)
+{
+ struct bcm_device *dev = NULL;
+ bool is_found = false;
+ struct list_head *ptr;
+
+ BT_DBG("set_callbacks for %s(%p)", pc->name, pc->context);
+
+ spin_lock(&device_list_lock);
+ list_for_each(ptr, &device_list) {
+ dev = list_entry(ptr, struct bcm_device, list);
+ if (!strcmp(dev->tty_name, pc->name)) {
+ is_found = true;
+ break;
+ }
+ }
+ spin_unlock(&device_list_lock);
+
+ if (!is_found) {
+ BT_DBG("set_callbacks - no device!");
+ return NULL;
+ }
+
+ dev->callbacks = *pc;
+ return dev;
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_set_callbacks);
+
+void btbcm_uart_reset_callbacks(void *device_context)
+{
+ struct bcm_device *dev = device_context;
+
+ memset(&dev->callbacks, 0, sizeof(dev->callbacks));
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_reset_callbacks);
+
+void btbcm_uart_poweron(void *device_context)
+{
+ struct bcm_device *dev = device_context;
+ int poweron_flag;
+
+ if (dev->reg_on_gpio) {
+ poweron_flag = !dev->reg_on_active_low;
+ gpiod_set_value(dev->reg_on_gpio, poweron_flag);
+ BT_DBG("poweron %d, delay 15 ms", poweron_flag);
+ }
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_poweron);
+
+void btbcm_uart_poweroff(void *device_context)
+{
+ struct bcm_device *dev = device_context;
+ int poweron_flag;
+
+ if (dev->reg_on_gpio) {
+ poweron_flag = dev->reg_on_active_low;
+ gpiod_set_value(dev->reg_on_gpio, poweron_flag);
+ BT_DBG("poweroff %d, delay 15 ms", poweron_flag);
+ }
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_poweroff);
+
+void btbcm_uart_suspend(void *device_context)
+{
+ struct bcm_device *dev = device_context;
+ int gpio_value;
+
+ if (dev->dev_wake_gpio) {
+ gpio_value = !!dev->dev_wake_active_low;
+ gpiod_set_value(dev->dev_wake_gpio, gpio_value);
+ BT_DBG("suspend %d, delay 15ms", gpio_value);
+ mdelay(15);
+ }
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_suspend);
+
+void btbcm_uart_resume(void *device_context)
+{
+ struct bcm_device *dev = device_context;
+ int gpio_value;
+
+ if (dev->dev_wake_gpio) {
+ gpio_value = !dev->dev_wake_active_low;
+ gpiod_set_value(dev->dev_wake_gpio, gpio_value);
+ BT_DBG("resume %d, delay 15ms", gpio_value);
+ mdelay(15);
+ }
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_resume);
+
+void btbcm_uart_get_params(void *device_context, struct btbcm_uart_params *pp)
+{
+ struct bcm_device *dev = device_context;
+
+ memset(pp, 0, sizeof(struct btbcm_uart_params));
+ pp->configure_sleep = dev->configure_sleep;
+ pp->manual_fc = dev->manual_fc;
+ pp->dev_wake_active_low = dev->dev_wake_active_low;
+ pp->bt_wake_active_low = dev->bt_wake_active_low;
+ pp->idle_timeout_in_secs = dev->idle_timeout;
+ pp->oper_speed = dev->oper_speed;
+ pp->configure_audio = dev->configure_audio;
+ pp->pcm_clockmode = dev->pcm_clockmode;
+ pp->pcm_fillmethod = dev->pcm_fillmethod;
+ pp->pcm_fillnum = dev->pcm_fillnum;
+ pp->pcm_fillvalue = dev->pcm_fillvalue;
+ pp->pcm_incallbitclock = dev->pcm_incallbitclock;
+ pp->pcm_lsbfirst = dev->pcm_lsbfirst;
+ pp->pcm_rightjustify = dev->pcm_rightjustify;
+ pp->pcm_routing = dev->pcm_routing;
+ pp->pcm_shortframesync = dev->pcm_shortframesync;
+ pp->pcm_syncmode = dev->pcm_syncmode;
+}
+EXPORT_SYMBOL_GPL(btbcm_uart_get_params);
+
+/* Platform susp and resume callbacks */
+static SIMPLE_DEV_PM_OPS(bcm_uart_pm_ops, bcm_uart_suspend, bcm_uart_resume);
+
+/* Driver match table */
+static const struct of_device_id bcm_uart_table[] = {
+ { .compatible = "brcm,brcm-bt-uart" },
+ {}
+};
+
+/* Driver configuration */
+static struct platform_driver bcm_uart_driver = {
+ .probe = bcm_uart_probe,
+ .remove = bcm_uart_remove,
+ .driver = {
+ .name = "btbcm_uart",
+ .of_match_table = of_match_ptr(bcm_uart_table),
+ .owner = THIS_MODULE,
+ .pm = &bcm_uart_pm_ops,
+ },
+};
+
+module_platform_driver(bcm_uart_driver);
+
+MODULE_AUTHOR("Ilya Faenson <ifaenson@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Bluetooth UART Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/bluetooth/btbcm_uart.h b/drivers/bluetooth/btbcm_uart.h
new file mode 100644
index 0000000..4274fd5
--- /dev/null
+++ b/drivers/bluetooth/btbcm_uart.h
@@ -0,0 +1,74 @@
+/*
+ * Bluetooth BCM UART Driver Header
+ *
+ * Copyright (c) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* Callbacks from the driver into the protocol */
+struct btbcm_uart_callbacks {
+ void *context; /* protocol instance context */
+ char name[64]; /* protocol tty device, for example, ttyS0 */
+
+ /* client callbacks */
+ void (*suspend)(void *context);
+ void (*resume)(void *context);
+ void (*wakeup)(void *context);
+};
+
+/* Driver parameters retrieved from the DT or ACPI */
+struct btbcm_uart_params {
+ bool configure_sleep;
+ int manual_fc;
+ int dev_wake_active_low;
+ int bt_wake_active_low;
+ int idle_timeout_in_secs;
+ int oper_speed;
+ bool configure_audio;
+ int pcm_clockmode;
+ int pcm_fillmethod;
+ int pcm_fillnum;
+ int pcm_fillvalue;
+ int pcm_incallbitclock;
+ int pcm_lsbfirst;
+ int pcm_rightjustify;
+ int pcm_routing;
+ int pcm_shortframesync;
+ int pcm_syncmode;
+};
+
+/* Actions on the BTBCM_UART driver
+ */
+
+/* Configure protocol callbacks */
+void *btbcm_uart_set_callbacks(struct btbcm_uart_callbacks *pc);
+
+/* Reset protocol callbacks */
+void btbcm_uart_reset_callbacks(void *device_context);
+
+/* Retrieve BT device parameters */
+void btbcm_uart_get_params(void *device_context,
+ struct btbcm_uart_params *pp);
+
+/* Resume the BT device via GPIO */
+void btbcm_uart_resume(void *device_context);
+
+/* Suspend the BT device via GPIO */
+void btbcm_uart_suspend(void *device_context);
+
+/* Power the BT device off via GPIO */
+void btbcm_uart_poweroff(void *device_context);
+
+/* Power the BT device on via GPIO */
+void btbcm_uart_poweron(void *device_context);
+
--
1.9.1
next prev parent reply other threads:[~2015-06-17 21:30 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 21:30 [PATCH v4 0/4] Broadcom Bluetooth UART device driver Ilya Faenson
2015-06-17 21:30 ` [PATCH v4 1/4] Broadcom Bluetooth UART Device Tree bindings Ilya Faenson
2015-06-17 21:33 ` Arend van Spriel
[not found] ` <1434576658-20730-2-git-send-email-ifaenson-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-06-17 23:11 ` FW: " Ilya Faenson
2015-06-17 23:11 ` Ilya Faenson
[not found] ` <E0D3336E15B58B4294723AC879BA5E942634F2-Wwdb2uEOBX8N93KskqRXH71+IgudQmzARxWJa1zDYLQ@public.gmane.org>
2015-06-18 15:02 ` Rob Herring
2015-06-18 15:02 ` Rob Herring
[not found] ` <CAL_JsqK9kup3sm3qgDLqtT8ajrN1ee6zfXwOoZqoq9cXQNwE_w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-18 18:54 ` Ilya Faenson
2015-06-18 18:54 ` Ilya Faenson
[not found] ` <E0D3336E15B58B4294723AC879BA5E94263E58-Wwdb2uEOBX8N93KskqRXH71+IgudQmzARxWJa1zDYLQ@public.gmane.org>
2015-06-18 19:41 ` Rob Herring
2015-06-18 19:41 ` Rob Herring
[not found] ` <CAL_JsqJAUTjNehtr_Af93k71mdSREb9pLMoSyDTm1S42VkA2sQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-18 20:37 ` Ilya Faenson
2015-06-18 20:37 ` Ilya Faenson
[not found] ` <E0D3336E15B58B4294723AC879BA5E942640A3-Wwdb2uEOBX8N93KskqRXH71+IgudQmzARxWJa1zDYLQ@public.gmane.org>
2015-06-19 15:47 ` Rob Herring
2015-06-19 15:47 ` Rob Herring
[not found] ` <CAL_JsqJKyj8sDwG82jb_CzXEDBN8aznR7eF5yTOiWruW8o3cng-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-19 17:06 ` Arend van Spriel
2015-06-19 17:06 ` Arend van Spriel
[not found] ` <55844C1E.8020301-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-06-19 18:49 ` Rob Herring
2015-06-19 18:49 ` Rob Herring
[not found] ` <CAL_JsqLr7JZ9=i2XuWR0_FZDyxpDRwDS5dkSpzjKA-8V=-mpOw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-06-19 19:20 ` Arend van Spriel
2015-06-19 19:20 ` Arend van Spriel
[not found] ` <55846B7D.1060601-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-06-29 18:36 ` Arend van Spriel
2015-06-29 18:36 ` Arend van Spriel
[not found] ` <55919023.200-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-07-02 18:26 ` Rob Herring
2015-07-02 18:26 ` Rob Herring
2015-06-19 20:37 ` Ilya Faenson
2015-06-19 20:37 ` Ilya Faenson
2015-06-19 19:23 ` Fabio Estevam
2015-06-19 20:40 ` Ilya Faenson
2015-06-17 21:30 ` [PATCH v4 2/4] hci_uart: line discipline enhancements Ilya Faenson
2015-06-17 21:50 ` Marcel Holtmann
2015-06-17 21:53 ` Ilya Faenson
2015-06-18 9:46 ` Frederic Danis
2015-06-18 10:17 ` Marcel Holtmann
2015-06-17 21:30 ` Ilya Faenson [this message]
2015-06-17 21:30 ` [PATCH v4 4/4] hci_bcm: Broadcom UART protocol enhancements Ilya Faenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434576658-20730-4-git-send-email-ifaenson@broadcom.com \
--to=ifaenson@broadcom.com \
--cc=arend@broadcom.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.