From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
Subject: [PATCHv2 4/5] e1000: add support for eth_(rxq|txq)_info_get
Date: Thu, 18 Jun 2015 14:18:47 +0100 [thread overview]
Message-ID: <1434633528-23329-5-git-send-email-konstantin.ananyev@intel.com> (raw)
In-Reply-To: <1434633528-23329-1-git-send-email-konstantin.ananyev@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
drivers/net/e1000/e1000_ethdev.h | 12 ++++++++++++
drivers/net/e1000/em_ethdev.c | 2 ++
drivers/net/e1000/em_rxtx.c | 38 ++++++++++++++++++++++++++++++++++++++
drivers/net/e1000/igb_ethdev.c | 4 ++++
drivers/net/e1000/igb_rxtx.c | 36 ++++++++++++++++++++++++++++++++++++
5 files changed, 92 insertions(+)
diff --git a/drivers/net/e1000/e1000_ethdev.h b/drivers/net/e1000/e1000_ethdev.h
index c451faa..57a4017 100644
--- a/drivers/net/e1000/e1000_ethdev.h
+++ b/drivers/net/e1000/e1000_ethdev.h
@@ -302,6 +302,12 @@ void igb_pf_mbx_process(struct rte_eth_dev *eth_dev);
int igb_pf_host_configure(struct rte_eth_dev *eth_dev);
+void igb_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+
+void igb_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
/*
* RX/TX EM function prototypes
*/
@@ -337,4 +343,10 @@ uint16_t eth_em_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t eth_em_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
+void em_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+
+void em_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
#endif /* _E1000_ETHDEV_H_ */
diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
index a306c55..1b6d2d0 100644
--- a/drivers/net/e1000/em_ethdev.c
+++ b/drivers/net/e1000/em_ethdev.c
@@ -166,6 +166,8 @@ static const struct eth_dev_ops eth_em_ops = {
.mac_addr_add = eth_em_rar_set,
.mac_addr_remove = eth_em_rar_clear,
.set_mc_addr_list = eth_em_set_mc_addr_list,
+ .rxq_info_get = em_rxq_info_get,
+ .txq_info_get = em_txq_info_get,
};
/**
diff --git a/drivers/net/e1000/em_rxtx.c b/drivers/net/e1000/em_rxtx.c
index fdc825f..fc1c5f2 100644
--- a/drivers/net/e1000/em_rxtx.c
+++ b/drivers/net/e1000/em_rxtx.c
@@ -1862,3 +1862,41 @@ eth_em_tx_init(struct rte_eth_dev *dev)
/* This write will effectively turn on the transmit unit. */
E1000_WRITE_REG(hw, E1000_TCTL, tctl);
}
+
+void
+em_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo)
+{
+ struct em_rx_queue *rxq;
+
+ rxq = dev->data->rx_queues[queue_id];
+
+ qinfo->mp = rxq->mb_pool;
+ qinfo->scattered_rx = dev->data->scattered_rx;
+
+ qinfo->nb_desc = rxq->nb_rx_desc;
+ qinfo->max_desc = EM_MAX_RING_DESC;
+ qinfo->min_desc = EM_MIN_RING_DESC;
+
+ qinfo->conf.rx_free_thresh = rxq->rx_free_thresh;
+}
+
+void
+em_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo)
+{
+ struct em_tx_queue *txq;
+
+ txq = dev->data->tx_queues[queue_id];
+
+ qinfo->nb_desc = txq->nb_tx_desc;
+ qinfo->max_desc = EM_MAX_RING_DESC;
+ qinfo->min_desc = EM_MIN_RING_DESC;
+
+ qinfo->conf.tx_thresh.pthresh = txq->pthresh;
+ qinfo->conf.tx_thresh.hthresh = txq->hthresh;
+ qinfo->conf.tx_thresh.wthresh = txq->wthresh;
+
+ qinfo->conf.tx_free_thresh = txq->tx_free_thresh;
+ qinfo->conf.tx_rs_thresh = txq->tx_rs_thresh;
+}
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 24c7510..92ef01e 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -274,6 +274,8 @@ static const struct eth_dev_ops eth_igb_ops = {
.rss_hash_conf_get = eth_igb_rss_hash_conf_get,
.filter_ctrl = eth_igb_filter_ctrl,
.set_mc_addr_list = eth_igb_set_mc_addr_list,
+ .rxq_info_get = igb_rxq_info_get,
+ .txq_info_get = igb_txq_info_get,
};
/*
@@ -295,6 +297,8 @@ static const struct eth_dev_ops igbvf_eth_dev_ops = {
.tx_queue_setup = eth_igb_tx_queue_setup,
.tx_queue_release = eth_igb_tx_queue_release,
.set_mc_addr_list = eth_igb_set_mc_addr_list,
+ .rxq_info_get = igb_rxq_info_get,
+ .txq_info_get = igb_txq_info_get,
};
/**
diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c
index 43d6703..704d414 100644
--- a/drivers/net/e1000/igb_rxtx.c
+++ b/drivers/net/e1000/igb_rxtx.c
@@ -2394,3 +2394,39 @@ eth_igbvf_tx_init(struct rte_eth_dev *dev)
}
}
+
+void
+igb_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo)
+{
+ struct igb_rx_queue *rxq;
+
+ rxq = dev->data->rx_queues[queue_id];
+
+ qinfo->mp = rxq->mb_pool;
+ qinfo->scattered_rx = dev->data->scattered_rx;
+
+ qinfo->nb_desc = rxq->nb_rx_desc;
+ qinfo->max_desc = IGB_MAX_RING_DESC;
+ qinfo->min_desc = IGB_MIN_RING_DESC;
+
+ qinfo->conf.rx_free_thresh = rxq->rx_free_thresh;
+ qinfo->conf.rx_drop_en = rxq->drop_en;
+}
+
+void
+igb_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo)
+{
+ struct igb_tx_queue *txq;
+
+ txq = dev->data->tx_queues[queue_id];
+
+ qinfo->nb_desc = txq->nb_tx_desc;
+ qinfo->max_desc = IGB_MAX_RING_DESC;
+ qinfo->min_desc = IGB_MIN_RING_DESC;
+
+ qinfo->conf.tx_thresh.pthresh = txq->pthresh;
+ qinfo->conf.tx_thresh.hthresh = txq->hthresh;
+ qinfo->conf.tx_thresh.wthresh = txq->wthresh;
+}
--
1.8.5.3
next prev parent reply other threads:[~2015-06-18 13:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 16:54 [PATCH 0/5] ethdev: add new API to retrieve RX/TX queue information Konstantin Ananyev
2015-06-17 16:54 ` [PATCH 1/5] " Konstantin Ananyev
2015-06-18 13:18 ` [PATCHv2 0/5] " Konstantin Ananyev
2015-06-18 13:18 ` [PATCHv2 1/5] " Konstantin Ananyev
2015-07-20 0:12 ` Thomas Monjalon
2015-07-20 9:52 ` Ananyev, Konstantin
2015-06-18 13:18 ` [PATCHv2 2/5] i40e: add support for eth_(rxq|txq)_info_get Konstantin Ananyev
2015-06-18 13:18 ` [PATCHv2 3/5] ixgbe: " Konstantin Ananyev
2015-06-18 13:18 ` Konstantin Ananyev [this message]
2015-06-18 13:18 ` [PATCHv2 5/5] testpmd: add new command to display RX/TX queue information Konstantin Ananyev
2015-06-18 13:30 ` [PATCHv2 0/5] ethdev: add new API to retrieve " Walukiewicz, Miroslaw
2015-06-18 13:39 ` Bruce Richardson
2015-06-18 13:56 ` Walukiewicz, Miroslaw
2015-06-18 14:13 ` Bruce Richardson
2015-06-18 14:17 ` Ananyev, Konstantin
2015-06-18 14:37 ` Walukiewicz, Miroslaw
2015-06-18 13:58 ` Bruce Richardson
2015-06-19 3:18 ` Zhang, Helin
2015-06-23 12:35 ` David Harton (dharton)
2015-06-17 16:54 ` [PATCH 2/5] i40e: add support for eth_(rx|tx)_qinfo_get Konstantin Ananyev
2015-06-17 16:54 ` [PATCH 3/5] ixgbe: " Konstantin Ananyev
2015-06-17 16:54 ` [PATCH 4/5] e1000: " Konstantin Ananyev
2015-06-17 16:54 ` [PATCH 5/5] testpmd: add new command to display RX/TX queue information Konstantin Ananyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434633528-23329-5-git-send-email-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.