From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: xen-devel@lists.xen.org
Cc: wei.liu2@citrix.com, ian.campbell@citrix.com,
wency@cn.fujitsu.com, andrew.cooper3@citrix.com,
yunhong.jiang@intel.com, eddie.dong@intel.com,
guijianfeng@cn.fujitsu.com, rshriram@cs.ubc.ca,
ian.jackson@eu.citrix.com
Subject: [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind
Date: Thu, 25 Jun 2015 14:31:09 +0800 [thread overview]
Message-ID: <1435213872-10698-16-git-send-email-yanghy@cn.fujitsu.com> (raw)
In-Reply-To: <1435213872-10698-1-git-send-email-yanghy@cn.fujitsu.com>
implement COLO nic subkind.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
tools/hotplug/Linux/Makefile | 1 +
tools/hotplug/Linux/colo-proxy-setup | 131 +++++++++++++++
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo_nic.c | 317 +++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 5 +
tools/libxl/libxl_types.idl | 1 +
6 files changed, 456 insertions(+)
create mode 100755 tools/hotplug/Linux/colo-proxy-setup
create mode 100644 tools/libxl/libxl_colo_nic.c
diff --git a/tools/hotplug/Linux/Makefile b/tools/hotplug/Linux/Makefile
index d94a9cb..1c28bea 100644
--- a/tools/hotplug/Linux/Makefile
+++ b/tools/hotplug/Linux/Makefile
@@ -25,6 +25,7 @@ XEN_SCRIPTS += vscsi
XEN_SCRIPTS += block-iscsi
XEN_SCRIPTS += block-drbd-probe
XEN_SCRIPTS += $(XEN_SCRIPTS-y)
+XEN_SCRIPTS += colo-proxy-setup
SUBDIRS-$(CONFIG_SYSTEMD) += systemd
diff --git a/tools/hotplug/Linux/colo-proxy-setup b/tools/hotplug/Linux/colo-proxy-setup
new file mode 100755
index 0000000..3096a9c
--- /dev/null
+++ b/tools/hotplug/Linux/colo-proxy-setup
@@ -0,0 +1,131 @@
+#! /bin/bash
+
+dir=$(dirname "$0")
+. "$dir/xen-hotplug-common.sh"
+. "$dir/hotplugpath.sh"
+. "$dir/xen-network-ft.sh"
+
+findCommand "$@"
+
+if [ "$command" != "setup" -a "$command" != "teardown" ]
+then
+ echo "Invalid command: $command"
+ log err "Invalid command: $command"
+ exit 1
+fi
+
+evalVariables "$@"
+
+: ${vifname:?}
+: ${forwarddev:?}
+: ${mode:?}
+: ${index:?}
+: ${bridge:?}
+
+forwardbr="colobr0"
+
+if [ "$mode" != "primary" -a "$mode" != "secondary" ]
+then
+ echo "Invalid mode: $mode"
+ log err "Invalid mode: $mode"
+ exit 1
+fi
+
+if [ $index -lt 0 ] || [ $index -gt 100 ]; then
+ echo "index overflow"
+ exit 1
+fi
+
+function setup_primary()
+{
+ do_without_error tc qdisc add dev $vifname root handle 1: prio
+ do_without_error tc filter add dev $vifname parent 1: protocol ip prio 10 \
+ u32 match u32 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter add dev $vifname parent 1: protocol arp prio 11 \
+ u32 match u32 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter add dev $vifname parent 1: protocol ipv6 prio \
+ 12 u32 match u32 0 0 flowid 1:2 action mirred egress mirror \
+ dev $forwarddev
+
+ do_without_error modprobe nf_conntrack_ipv4
+ do_without_error modprobe xt_PMYCOLO sec_dev=$forwarddev
+
+ do_without_error iptables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j PMYCOLO --index $index
+ do_without_error ip6tables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j PMYCOLO --index $index
+ do_without_error arptables -I INPUT -i $forwarddev -j MARK --set-mark $index
+}
+
+function teardown_primary()
+{
+ do_without_error tc filter del dev $vifname parent 1: protocol ip prio 10 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter del dev $vifname parent 1: protocol arp prio 11 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter del dev $vifname parent 1: protocol ipv6 prio 12 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc qdisc del dev $vifname root handle 1: prio
+
+ do_without_error iptables -t mangle -F
+ do_without_error ip6tables -t mangle -F
+ do_without_error arptables -F
+ do_without_error rmmod xt_PMYCOLO
+}
+
+function setup_secondary()
+{
+ do_without_error brctl delif $bridge $vifname
+ do_without_error brctl addbr $forwardbr
+ do_without_error brctl addif $forwardbr $vifname
+ do_without_error brctl addif $forwardbr $forwarddev
+ do_without_error modprobe xt_SECCOLO
+
+ do_without_error iptables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j SECCOLO --index $index
+ do_without_error ip6tables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j SECCOLO --index $index
+}
+
+function teardown_secondary()
+{
+ do_without_error brctl delif $forwardbr $forwarddev
+ do_without_error brctl delif $forwardbr $vifname
+ do_without_error brctl delbr $forwardbr
+ do_without_error brctl addif $bridge $vifname
+
+ do_without_error iptables -t mangle -F
+ do_without_error ip6tables -t mangle -F
+ do_without_error rmmod xt_SECCOLO
+}
+
+case "$command" in
+ setup)
+ if [ "$mode" = "primary" ]
+ then
+ setup_primary
+ else
+ setup_secondary
+ fi
+
+ success
+ ;;
+ teardown)
+ if [ "$mode" = "primary" ]
+ then
+ teardown_primary
+ else
+ teardown_secondary
+ fi
+ ;;
+esac
+
+if [ "$mode" = "primary" ]
+then
+ log debug "Successful colo-proxy-setup $command for $vifname." \
+ " vifname: $vifname, index: $index, forwarddev: $forwarddev."
+else
+ log debug "Successful colo-proxy-setup $command for $vifname." \
+ " vifname: $vifname, index: $index, forwarddev: $forwarddev,"\
+ " forwardbr: $forwardbr."
+fi
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 1beef6c..907b195 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -60,6 +60,7 @@ LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-y += libxl_colo_qdisk.o
LIBXL_OBJS-y += libxl_colo_proxy.o
+LIBXL_OBJS-y += libxl_colo_nic.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo_nic.c b/tools/libxl/libxl_colo_nic.c
new file mode 100644
index 0000000..6bbbded
--- /dev/null
+++ b/tools/libxl/libxl_colo_nic.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+typedef struct libxl__colo_device_nic {
+ int devid;
+ const char *vif;
+} libxl__colo_device_nic;
+
+enum {
+ primary,
+ secondary,
+};
+
+
+/* ========== init() and cleanup() ========== */
+int init_subkind_colo_nic(libxl__checkpoint_devices_state *cds)
+{
+ return 0;
+}
+
+void cleanup_subkind_colo_nic(libxl__checkpoint_devices_state *cds)
+{
+}
+
+/* ========== helper functions ========== */
+static void colo_save_setup_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status);
+static void colo_save_teardown_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status);
+
+/*
+ * If the device has a vifname, then use that instead of
+ * the vifX.Y format.
+ * it must ONLY be used for remus because if driver domains
+ * were in use it would constitute a security vulnerability.
+ */
+static const char *get_vifname(libxl__checkpoint_device *dev,
+ const libxl_device_nic *nic)
+{
+ const char *vifname = NULL;
+ const char *path;
+ int rc;
+
+ STATE_AO_GC(dev->cds->ao);
+
+ /* Convenience aliases */
+ const uint32_t domid = dev->cds->domid;
+
+ path = GCSPRINTF("%s/backend/vif/%d/%d/vifname",
+ libxl__xs_get_dompath(gc, 0), domid, nic->devid);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &vifname);
+ if (!rc && !vifname) {
+ vifname = libxl__device_nic_devname(gc, domid,
+ nic->devid,
+ nic->nictype);
+ }
+
+ return vifname;
+}
+
+/*
+ * the script needs the following env & args
+ * $vifname
+ * $forwarddev
+ * $mode(primary/secondary)
+ * $index
+ * $bridge
+ * setup/teardown as command line arg.
+ */
+static void setup_async_exec(libxl__checkpoint_device *dev, char *op, int side,
+ char *colo_proxy_script)
+{
+ int arraysize, nr = 0;
+ char **env = NULL, **args = NULL;
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ libxl__checkpoint_devices_state *cds = dev->cds;
+ libxl__async_exec_state *aes = &dev->aodev.aes;
+ const libxl_device_nic *nic = dev->backend_dev;
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ STATE_AO_GC(cds->ao);
+
+ /* Convenience aliases */
+ const char *const vif = colo_nic->vif;
+
+ arraysize = 11;
+ GCNEW_ARRAY(env, arraysize);
+ env[nr++] = "vifname";
+ env[nr++] = libxl__strdup(gc, vif);
+ env[nr++] = "forwarddev";
+ env[nr++] = libxl__strdup(gc, nic->forwarddev);
+ env[nr++] = "mode";
+ if (side == primary)
+ env[nr++] = "primary";
+ else
+ env[nr++] = "secondary";
+ env[nr++] = "index";
+ env[nr++] = GCSPRINTF("%d", css->cps.index);
+ env[nr++] = "bridge";
+ env[nr++] = libxl__strdup(gc, nic->bridge);
+ env[nr++] = NULL;
+ assert(nr == arraysize);
+
+ arraysize = 3; nr = 0;
+ GCNEW_ARRAY(args, arraysize);
+ args[nr++] = colo_proxy_script;
+ args[nr++] = op;
+ args[nr++] = NULL;
+ assert(nr == arraysize);
+
+ aes->ao = dev->cds->ao;
+ aes->what = GCSPRINTF("%s %s", args[0], args[1]);
+ aes->env = env;
+ aes->args = args;
+ aes->timeout_ms = LIBXL_HOTPLUG_TIMEOUT * 1000;
+ aes->stdfds[0] = -1;
+ aes->stdfds[1] = -1;
+ aes->stdfds[2] = -1;
+
+ if (!strcmp(op, "teardown"))
+ aes->callback = colo_save_teardown_script_cb;
+ else
+ aes->callback = colo_save_setup_script_cb;
+}
+
+/* ========== setup() and teardown() ========== */
+static void colo_nic_setup(libxl__egc *egc, libxl__checkpoint_device *dev,
+ int side, char *colo_proxy_script)
+{
+ int rc;
+ libxl__colo_device_nic *colo_nic;
+ const libxl_device_nic *nic = dev->backend_dev;
+
+ STATE_AO_GC(dev->cds->ao);
+
+ /*
+ * thers's no subkind of nic devices, so nic ops is always matched
+ * with nic devices, we begin to setup the nic device
+ */
+ dev->matched = 1;
+
+ if (!nic->forwarddev) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ GCNEW(colo_nic);
+ dev->concrete_data = colo_nic;
+ colo_nic->devid = nic->devid;
+ colo_nic->vif = get_vifname(dev, nic);
+ if (!colo_nic->vif) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ setup_async_exec(dev, "setup", side, colo_proxy_script);
+ rc = libxl__async_exec_start(gc, &dev->aodev.aes);
+ if (rc)
+ goto out;
+
+ return;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_save_setup_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status)
+{
+ libxl__ao_device *aodev = CONTAINER_OF(aes, *aodev, aes);
+ libxl__checkpoint_device *dev = CONTAINER_OF(aodev, *dev, aodev);
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ libxl__checkpoint_devices_state *cds = dev->cds;
+ const char *out_path_base, *hotplug_error = NULL;
+ int rc;
+
+ STATE_AO_GC(cds->ao);
+
+ /* Convenience aliases */
+ const uint32_t domid = cds->domid;
+ const int devid = colo_nic->devid;
+ const char *const vif = colo_nic->vif;
+
+ out_path_base = GCSPRINTF("%s/colo_proxy/%d",
+ libxl__xs_libxl_path(gc, domid), devid);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/hotplug-error", out_path_base),
+ &hotplug_error);
+ if (rc)
+ goto out;
+
+ if (hotplug_error) {
+ LOG(ERROR, "colo_proxy script %s setup failed for vif %s: %s",
+ aes->args[0], vif, hotplug_error);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (status) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+static void colo_nic_teardown(libxl__egc *egc, libxl__checkpoint_device *dev,
+ int side, char *colo_proxy_script)
+{
+ int rc;
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ STATE_AO_GC(dev->cds->ao);
+
+ if (!colo_nic || !colo_nic->vif) {
+ /* colo nic has not yet been set up, just return */
+ rc = 0;
+ goto out;
+ }
+
+ setup_async_exec(dev, "teardown", side, colo_proxy_script);
+
+ rc = libxl__async_exec_start(gc, &dev->aodev.aes);
+ if (rc)
+ goto out;
+
+ return;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_save_teardown_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status)
+{
+ int rc;
+ libxl__ao_device *aodev = CONTAINER_OF(aes, *aodev, aes);
+
+ if (status)
+ rc = ERROR_FAIL;
+ else
+ rc = 0;
+
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+/* ======== primary ======== */
+static void colo_nic_save_setup(libxl__egc *egc, libxl__checkpoint_device *dev)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ colo_nic_setup(egc, dev, primary, css->colo_proxy_script);
+}
+
+static void colo_nic_save_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ colo_nic_teardown(egc, dev, primary, css->colo_proxy_script);
+}
+
+const libxl__checkpoint_device_instance_ops colo_save_device_nic = {
+ .kind = LIBXL__DEVICE_KIND_VIF,
+ .setup = colo_nic_save_setup,
+ .teardown = colo_nic_save_teardown,
+};
+
+/* ======== secondary ======== */
+static void colo_nic_restore_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(dev->cds, *crs, cds);
+
+ colo_nic_setup(egc, dev, secondary, crs->colo_proxy_script);
+}
+
+static void colo_nic_restore_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(dev->cds, *crs, cds);
+
+ colo_nic_teardown(egc, dev, secondary, crs->colo_proxy_script);
+}
+
+const libxl__checkpoint_device_instance_ops colo_restore_device_nic = {
+ .kind = LIBXL__DEVICE_KIND_VIF,
+ .setup = colo_nic_restore_setup,
+ .teardown = colo_nic_restore_teardown,
+};
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 2e8b3d4..69306c0 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2746,6 +2746,8 @@ void cleanup_subkind_drbd_disk(libxl__checkpoint_devices_state *cds);
int init_subkind_qdisk(libxl__checkpoint_devices_state *cds);
void cleanup_subkind_qdisk(libxl__checkpoint_devices_state *cds);
int colo_qdisk_preresume(libxl_ctx *ctx, domid_t domid);
+int init_subkind_colo_nic(libxl__checkpoint_devices_state *cds);
+void cleanup_subkind_colo_nic(libxl__checkpoint_devices_state *cds);
typedef void libxl__checkpoint_callback(libxl__egc *,
libxl__checkpoint_devices_state *,
@@ -2947,6 +2949,7 @@ struct libxl__colo_save_state {
libxl__checkpoint_devices_state cds;
int send_fd;
int recv_fd;
+ char *colo_proxy_script;
/* private */
libxl__stream_read_state srs;
@@ -3336,6 +3339,7 @@ struct libxl__colo_restore_state {
int recv_fd;
int hvm;
libxl__colo_callback *callback;
+ char *colo_proxy_script;
/* private, colo restore checkpoint state */
libxl__domain_create_cb *saved_cb;
@@ -3358,6 +3362,7 @@ struct libxl__domain_create_state {
libxl_asyncprogress_how aop_console_how;
/* private to domain_create */
int guest_domid;
+ const char *colo_proxy_script;
libxl__domain_build_state build_state;
libxl__colo_restore_state crs;
libxl__bootloader_state bl;
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9adc3ce..399c75b 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -539,6 +539,7 @@ libxl_device_nic = Struct("device_nic", [
("rate_bytes_per_interval", uint64),
("rate_interval_usecs", uint32),
("gatewaydev", string),
+ ("forwarddev", string)
])
libxl_device_pci = Struct("device_pci", [
--
1.9.1
next prev parent reply other threads:[~2015-06-25 6:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
2015-07-14 15:15 ` Ian Campbell
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
2015-07-14 15:19 ` Ian Campbell
2015-07-15 0:34 ` Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 05/18] primary " Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 06/18] libxc/restore: support COLO restore Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 09/18] libxc/save: support COLO save Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 10/18] implement the cmdline for COLO Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 11/18] Support colo mode for qemu disk Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 12/18] COLO: use qemu block replication Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint Yang Hongyang
2015-06-25 6:31 ` Yang Hongyang [this message]
2015-06-25 6:31 ` [PATCH v7 COLO 16/18] setup and control colo proxy on primary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy Yang Hongyang
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
2015-07-15 0:41 ` Yang Hongyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435213872-10698-16-git-send-email-yanghy@cn.fujitsu.com \
--to=yanghy@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=wency@cn.fujitsu.com \
--cc=xen-devel@lists.xen.org \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.