From: Yinghai Lu <yinghai@kernel.org>
To: Kees Cook <keescook@chromium.org>,
"H. Peter Anvin" <hpa@zytor.com>, Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 42/42] x86: fix msr print again
Date: Tue, 7 Jul 2015 13:20:28 -0700 [thread overview]
Message-ID: <1436300428-21163-43-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1436300428-21163-1-git-send-email-yinghai@kernel.org>
msr early print out get broken again, fix it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/processor.h | 1 -
arch/x86/kernel/cpu/common.c | 61 +++++++++++++++++++++-------------------
2 files changed, 32 insertions(+), 30 deletions(-)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 43e6519..3a7bd35 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -177,7 +177,6 @@ extern void early_cpu_init(void);
extern void identify_boot_cpu(void);
extern void identify_secondary_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
-void print_cpu_msr(struct cpuinfo_x86 *);
extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 922c5e0..3c87e75 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1016,27 +1016,6 @@ out:
}
#endif
-void __init identify_boot_cpu(void)
-{
- identify_cpu(&boot_cpu_data);
- init_amd_e400_c1e_mask();
-#ifdef CONFIG_X86_32
- sysenter_setup();
- enable_sep_cpu();
-#endif
- cpu_detect_tlb(&boot_cpu_data);
-}
-
-void identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
- BUG_ON(c == &boot_cpu_data);
- identify_cpu(c);
-#ifdef CONFIG_X86_32
- enable_sep_cpu();
-#endif
- mtrr_ap_init();
-}
-
struct msr_range {
unsigned min;
unsigned max;
@@ -1082,6 +1061,38 @@ static __init int setup_show_msr(char *arg)
}
__setup("show_msr=", setup_show_msr);
+static void print_cpu_msr(struct cpuinfo_x86 *c)
+{
+ if (c->cpu_index < show_msr)
+ __print_cpu_msr();
+}
+
+void __init identify_boot_cpu(void)
+{
+ identify_cpu(&boot_cpu_data);
+ init_amd_e400_c1e_mask();
+#ifdef CONFIG_X86_32
+ sysenter_setup();
+ enable_sep_cpu();
+#endif
+ cpu_detect_tlb(&boot_cpu_data);
+
+ print_cpu_msr(&boot_cpu_data);
+}
+
+void identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+ BUG_ON(c == &boot_cpu_data);
+ identify_cpu(c);
+#ifdef CONFIG_X86_32
+ enable_sep_cpu();
+#endif
+
+ print_cpu_msr(c);
+
+ mtrr_ap_init();
+}
+
static __init int setup_noclflush(char *arg)
{
setup_clear_cpu_cap(X86_FEATURE_CLFLUSH);
@@ -1115,14 +1126,6 @@ void print_cpu_info(struct cpuinfo_x86 *c)
printk(KERN_CONT ", stepping: %02x)\n", c->x86_mask);
else
printk(KERN_CONT ")\n");
-
- print_cpu_msr(c);
-}
-
-void print_cpu_msr(struct cpuinfo_x86 *c)
-{
- if (c->cpu_index < show_msr)
- __print_cpu_msr();
}
static __init int setup_disablecpuid(char *arg)
--
1.8.4.5
next prev parent reply other threads:[~2015-07-07 20:24 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-07 20:19 [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Yinghai Lu
2015-07-07 20:19 ` [PATCH 01/42] x86, kasl: Remove not needed parameter for choose_kernel_location Yinghai Lu
2015-07-07 20:57 ` Kees Cook
2015-07-07 20:19 ` [PATCH 02/42] x86, boot: Move compressed kernel to end of buffer before decompressing Yinghai Lu
2015-07-07 21:22 ` Kees Cook
2015-07-07 20:19 ` [PATCH 03/42] x86, boot: Fix run_size calculation Yinghai Lu
2015-07-07 22:15 ` Kees Cook
2015-07-07 20:19 ` [PATCH 04/42] x86, kaslr: Kill not needed and wrong run_size calculation code Yinghai Lu
2015-07-07 22:18 ` Kees Cook
2015-07-07 20:19 ` [PATCH 05/42] x86, kaslr: rename output_size to output_run_size Yinghai Lu
2015-07-07 20:19 ` [PATCH 06/42] x86, kaslr: Consolidate mem_avoid array filling Yinghai Lu
2015-07-07 22:36 ` Kees Cook
2015-07-07 20:19 ` [PATCH 07/42] x86, boot: Move z_extract_offset calculation to header.S Yinghai Lu
2015-07-07 20:19 ` [PATCH 08/42] x86, kaslr: Get correct max_addr for relocs pointer Yinghai Lu
2015-07-07 22:40 ` Kees Cook
2015-07-07 20:19 ` [PATCH 09/42] x86, boot: Split kernel_ident_mapping_init to another file Yinghai Lu
2015-07-07 20:19 ` [PATCH 10/42] x86, 64bit: Set ident_mapping for kaslr Yinghai Lu
2015-07-07 20:19 ` [PATCH 11/42] x86, boot: Add checking for memcpy Yinghai Lu
2015-07-07 20:19 ` [PATCH 12/42] x86, kaslr: Fix a bug that relocation can not be handled when kernel is loaded above 2G Yinghai Lu
2015-07-07 22:42 ` Kees Cook
2015-07-07 20:19 ` [PATCH 13/42] x86, kaslr: Introduce struct slot_area to manage randomization slot info Yinghai Lu
2015-07-07 20:20 ` [PATCH 14/42] x86, kaslr: Add two functions which will be used later Yinghai Lu
2015-07-07 20:20 ` [PATCH 15/42] x86, kaslr: Introduce fetch_random_virt_offset to randomize the kernel text mapping address Yinghai Lu
2015-07-07 20:20 ` [PATCH 16/42] x86, kaslr: Randomize physical and virtual address of kernel separately Yinghai Lu
2015-07-07 20:20 ` [PATCH 17/42] x86, kaslr: Add support of kernel physical address randomization above 4G Yinghai Lu
2015-07-07 20:20 ` [PATCH 18/42] x86, kaslr: Remove useless codes Yinghai Lu
2015-07-07 20:20 ` [PATCH 19/42] x86, kaslr: Allow random address could be below loaded address Yinghai Lu
2015-07-07 20:20 ` [PATCH 20/42] x86, boot: Add printf support for early console in compressed/misc.c Yinghai Lu
2015-07-07 20:20 ` [PATCH 21/42] x86, boot: Add more debug printout " Yinghai Lu
2015-07-07 20:20 ` [PATCH 22/42] x86, setup: Check early serial console per string instead of one char Yinghai Lu
2015-07-07 22:59 ` Kees Cook
2015-07-07 20:20 ` [PATCH 23/42] x86, setup: Use puts() instead of printf() in edd code Yinghai Lu
2015-07-07 20:20 ` [PATCH 24/42] x86: Setup early console as early as possible in x86_start_kernel() Yinghai Lu
2015-07-07 20:20 ` [PATCH 25/42] x86, boot: print compression suffix in decompress stage Yinghai Lu
2015-07-07 23:13 ` Kees Cook
2015-07-07 20:20 ` [PATCH 26/42] x86: remove not needed clear_page calling Yinghai Lu
2015-07-07 23:14 ` Kees Cook
2015-07-07 20:20 ` [PATCH 27/42] x86: restore end_of_ram to E820_RAM Yinghai Lu
2015-07-08 17:44 ` Matt Fleming
2015-07-09 1:41 ` Dan Williams
2015-07-09 7:45 ` Christoph Hellwig
2015-07-09 11:17 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 28/42] x86, boot: Allow 64bit EFI kernel to be loaded above 4G Yinghai Lu
2015-07-07 23:12 ` Kees Cook
2015-07-08 18:00 ` Matt Fleming
2015-07-07 20:20 ` [PATCH 29/42] x86: Find correct 64 bit ramdisk address for microcode early update Yinghai Lu
2015-07-07 23:08 ` Kees Cook
2015-07-07 20:20 ` [PATCH 30/42] x86: Kill E820_RESERVED_KERN Yinghai Lu
2015-07-07 20:20 ` [PATCH 31/42] x86, efi: Copy SETUP_EFI data and access directly Yinghai Lu
2015-07-22 10:58 ` Matt Fleming
2015-07-22 10:58 ` Matt Fleming
2015-07-24 2:07 ` Dave Young
2015-07-24 2:07 ` Dave Young
2015-07-07 20:20 ` [PATCH 32/42] x86, of: Let add_dtb reserve setup_data locally Yinghai Lu
2015-07-07 20:20 ` [PATCH 33/42] x86, boot: Add add_pci handler for SETUP_PCI Yinghai Lu
2015-07-14 22:30 ` Bjorn Helgaas
2015-07-07 20:20 ` [PATCH 34/42] x86: Kill not used setup_data handling code Yinghai Lu
2015-07-07 20:20 ` [PATCH 35/42] x86, boot, PCI: Convert SETUP_PCI data to list Yinghai Lu
2015-07-14 22:35 ` Bjorn Helgaas
2015-07-15 1:57 ` Yinghai Lu
2015-07-07 20:20 ` [PATCH 36/42] x86, boot, PCI: Copy SETUP_PCI rom to kernel space Yinghai Lu
2015-07-07 20:20 ` [PATCH 37/42] x86, boot, PCI: Export SETUP_PCI data via sysfs Yinghai Lu
2015-07-07 20:20 ` [PATCH 38/42] x86: Fix typo in mark_rodata_ro Yinghai Lu
2015-07-07 23:05 ` Kees Cook
2015-07-07 20:20 ` [PATCH 39/42] x86, 64bit: add pfn_range_is_highmapped() Yinghai Lu
2015-07-07 20:20 ` [PATCH 40/42] x86, 64bit: remove highmap for not needed ranges Yinghai Lu
2015-07-07 23:17 ` Kees Cook
2015-07-07 20:20 ` [PATCH 41/42] x86, 64bit: Add __pa_high/__va_high Yinghai Lu
2015-07-07 20:20 ` Yinghai Lu [this message]
2015-07-07 23:21 ` [PATCH 00/42] x86: updated patches for kaslr and setup_data etc for v4.3 Kees Cook
2015-10-02 20:16 ` Kees Cook
2016-02-06 11:50 ` Baoquan He
2016-02-09 4:31 ` Kees Cook
2016-02-09 4:31 ` [kernel-hardening] " Kees Cook
2016-02-15 7:29 ` Baoquan He
2016-02-15 7:29 ` [kernel-hardening] " Baoquan He
2016-02-16 23:50 ` Kees Cook
2016-02-16 23:50 ` [kernel-hardening] " Kees Cook
2015-07-08 10:51 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436300428-21163-43-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=bhe@redhat.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.