From: Markos Chandras <markos.chandras@imgtec.com> To: <linux-mips@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Subject: [PATCH 19/19] MIPS: Set up FTLB probability for I6400 Date: Thu, 9 Jul 2015 10:40:53 +0100 [thread overview] Message-ID: <1436434853-30001-20-git-send-email-markos.chandras@imgtec.com> (raw) In-Reply-To: <1436434853-30001-1-git-send-email-markos.chandras@imgtec.com> Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> --- arch/mips/include/asm/mipsregs.h | 2 ++ arch/mips/kernel/cpu-probe.c | 18 +++++++++++++----- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index c5b0956a8530..723ee3c7849d 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -579,6 +579,8 @@ #define MIPS_CONF7_IAR (_ULCAST_(1) << 10) #define MIPS_CONF7_AR (_ULCAST_(1) << 16) +/* FTLB probability bits for R6 */ +#define MIPS_CONF7_FTLBP_SHIFT (18) /* MAAR bit definitions */ #define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 62dae429fe70..4e39b340f3b7 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -369,25 +369,33 @@ static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) static int set_ftlb_enable(struct cpuinfo_mips *c, int enable) { - unsigned int config6; + unsigned int config; /* It's implementation dependent how the FTLB can be enabled */ switch (c->cputype) { case CPU_PROAPTIV: case CPU_P5600: /* proAptiv & related cores use Config6 to enable the FTLB */ - config6 = read_c0_config6(); + config = read_c0_config6(); /* Clear the old probability value */ - config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); + config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); if (enable) /* Enable FTLB */ - write_c0_config6(config6 | + write_c0_config6(config | (calculate_ftlb_probability(c) << MIPS_CONF6_FTLBP_SHIFT) | MIPS_CONF6_FTLBEN); else /* Disable FTLB */ - write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN); + write_c0_config6(config & ~MIPS_CONF6_FTLBEN); + break; + case CPU_I6400: + /* I6400 & related cores use Config7 to configure FTLB */ + config = read_c0_config7(); + /* Clear the old probability value */ + config &= ~(3 << MIPS_CONF7_FTLBP_SHIFT); + write_c0_config7(config | (calculate_ftlb_probability(c) + << MIPS_CONF7_FTLBP_SHIFT)); break; default: return 1; -- 2.4.5
WARNING: multiple messages have this Message-ID (diff)
From: Markos Chandras <markos.chandras@imgtec.com> To: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Subject: [PATCH 19/19] MIPS: Set up FTLB probability for I6400 Date: Thu, 9 Jul 2015 10:40:53 +0100 [thread overview] Message-ID: <1436434853-30001-20-git-send-email-markos.chandras@imgtec.com> (raw) Message-ID: <20150709094053.ESXZswlUuqp7jaFZemTfoHMAFFlVY9dK_LqOzBtG6Yk@z> (raw) In-Reply-To: <1436434853-30001-1-git-send-email-markos.chandras@imgtec.com> Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> --- arch/mips/include/asm/mipsregs.h | 2 ++ arch/mips/kernel/cpu-probe.c | 18 +++++++++++++----- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index c5b0956a8530..723ee3c7849d 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -579,6 +579,8 @@ #define MIPS_CONF7_IAR (_ULCAST_(1) << 10) #define MIPS_CONF7_AR (_ULCAST_(1) << 16) +/* FTLB probability bits for R6 */ +#define MIPS_CONF7_FTLBP_SHIFT (18) /* MAAR bit definitions */ #define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 62dae429fe70..4e39b340f3b7 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -369,25 +369,33 @@ static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) static int set_ftlb_enable(struct cpuinfo_mips *c, int enable) { - unsigned int config6; + unsigned int config; /* It's implementation dependent how the FTLB can be enabled */ switch (c->cputype) { case CPU_PROAPTIV: case CPU_P5600: /* proAptiv & related cores use Config6 to enable the FTLB */ - config6 = read_c0_config6(); + config = read_c0_config6(); /* Clear the old probability value */ - config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); + config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); if (enable) /* Enable FTLB */ - write_c0_config6(config6 | + write_c0_config6(config | (calculate_ftlb_probability(c) << MIPS_CONF6_FTLBP_SHIFT) | MIPS_CONF6_FTLBEN); else /* Disable FTLB */ - write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN); + write_c0_config6(config & ~MIPS_CONF6_FTLBEN); + break; + case CPU_I6400: + /* I6400 & related cores use Config7 to configure FTLB */ + config = read_c0_config7(); + /* Clear the old probability value */ + config &= ~(3 << MIPS_CONF7_FTLBP_SHIFT); + write_c0_config7(config | (calculate_ftlb_probability(c) + << MIPS_CONF7_FTLBP_SHIFT)); break; default: return 1; -- 2.4.5
next prev parent reply other threads:[~2015-07-09 9:47 UTC|newest] Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-07-09 9:40 [PATCH 00/19] Initial I6400 and CM3 support Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 01/19] MIPS: Add MIPS I6400 PRid and cputype identifiers Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 02/19] MIPS: Add cases for CPU_I6400 Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 10:03 ` Ralf Baechle 2015-07-09 10:14 ` Markos Chandras 2015-07-09 10:14 ` Markos Chandras 2015-07-09 11:43 ` Ralf Baechle 2015-07-09 9:40 ` [PATCH 03/19] MIPS: Add MIPS I6400 probe support Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 04/19] MIPS: Kconfig: Disable MIPS MT and SMP implementations for R6 Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 05/19] MIPS: asm: mips-cm: Implement mips_cm_revision Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 11:09 ` Sergei Shtylyov 2015-07-09 16:05 ` Markos Chandras 2015-07-09 16:05 ` Markos Chandras 2015-07-09 11:29 ` James Hogan 2015-07-09 11:29 ` James Hogan 2015-07-09 16:05 ` Markos Chandras 2015-07-09 16:05 ` Markos Chandras 2015-07-10 9:12 ` [PATCH v2 " Markos Chandras 2015-07-10 9:12 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 06/19] MIPS: asm: add CM GCR_L2_CONFIG register accessors Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 07/19] MIPS: mm: c-r4k: extend way_string array Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 08/19] MIPS: support CM3 L2 cache Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 09/19] MIPS: Add platform callback before initializing the " Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 10/19] MIPS: asm: mips-cm: Extend CM accessors for 64-bit CPUs Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-14 8:14 ` [PATCH v2 " Markos Chandras 2015-07-14 8:14 ` Markos Chandras 2015-07-14 8:30 ` Paul Burton 2015-07-14 8:30 ` Paul Burton 2015-07-14 8:35 ` Paul Burton 2015-07-14 8:35 ` Paul Burton 2015-07-14 8:45 ` Markos Chandras 2015-07-14 8:45 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 11/19] MIPS: kernel: mips-cm: The CMGCRBase register is 64-bit on MIPS64 Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 12/19] MIPS: kernel: mips-cpc: Fix type for GCR CPC base reg for 64-bit Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 13/19] MIPS: kernel: mips-cm: Add support for reporting CM cache errors Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 14/19] drivers: irqchip: irq-mips-gic: Extend GIC accessors for 64-bit CMs Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-14 9:26 ` [PATCH v2 " Markos Chandras 2015-07-14 9:26 ` Markos Chandras 2015-07-14 11:57 ` Jonas Gorski 2015-07-14 12:21 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 15/19] drivers: irqchip: irq-mips-gic: Add support for CM3 64-bit timer irqs Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 16/19] MIPS: kernel: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 17/19] MIPS: Add default case for the FTLB enable/disable code Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` [PATCH 18/19] MIPS: kernel: cpu-probe: Fix VTLB/FTLB configuration for R6 Markos Chandras 2015-07-09 9:40 ` Markos Chandras 2015-07-09 9:40 ` Markos Chandras [this message] 2015-07-09 9:40 ` [PATCH 19/19] MIPS: Set up FTLB probability for I6400 Markos Chandras
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1436434853-30001-20-git-send-email-markos.chandras@imgtec.com \ --to=markos.chandras@imgtec.com \ --cc=linux-mips@linux-mips.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.