* [PATCH] drm/msm: add calls to prepare and unprepare panel
@ 2015-07-27 14:12 Srinivas Kandagatla
0 siblings, 0 replies; only message in thread
From: Srinivas Kandagatla @ 2015-07-27 14:12 UTC (permalink / raw
To: robdclark, dri-devel
Cc: David Airlie, linux-kernel, linux-arm-msm, Srinivas Kandagatla
Prepare the panel before it's enabled and un-prepare after disable, this
will make sure that the regulators are switched on and off correctly.
Tested it on APQ8064 based IFC6410 with panel.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c
index c048433..4cd6e72 100644
--- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c
@@ -346,8 +346,10 @@ static void mdp4_lcdc_encoder_disable(struct drm_encoder *encoder)
mdp4_write(mdp4_kms, REG_MDP4_LCDC_ENABLE, 0);
- if (panel)
+ if (panel) {
drm_panel_disable(panel);
+ drm_panel_unprepare(panel);
+ }
/*
* Wait for a vsync so we know the ENABLE=0 latched before
@@ -412,8 +414,10 @@ static void mdp4_lcdc_encoder_enable(struct drm_encoder *encoder)
if (ret)
dev_err(dev->dev, "failed to enable lcdc_clk: %d\n", ret);
- if (panel)
+ if (panel) {
+ drm_panel_prepare(panel);
drm_panel_enable(panel);
+ }
setup_phy(encoder);
--
1.9.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-07-27 14:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-27 14:12 [PATCH] drm/msm: add calls to prepare and unprepare panel Srinivas Kandagatla
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.