* [PATCH v3 1/2] ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
@ 2015-09-14 0:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2015-09-14 0:47 UTC (permalink / raw
To: Kukjin Kim, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-kernel, linux-samsung-soc
Cc: Javier Martinez Canillas
The Odroid XU4 board does not have audio codec so before adding DTS for
new board split the audio codec to separate DTSI file. Include the audio codec
DTSI in Odroid XU3 and XU3-Lite boards.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v2:
1. Add Javier's reviewed-by.
Changes since v1:
1. New patch (refactor).
---
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 61 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 47 -----------------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 1 +
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 1 +
4 files changed, 63 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000000..9493923ec652
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 90d298dce851..2f0fb8678e9f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -80,36 +80,6 @@
};
};
- sound: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "Odroid-XU3";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speakers", "Speakers";
- simple-audio-card,routing =
- "Headphone Jack", "HPL",
- "Headphone Jack", "HPR",
- "Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
- "Speakers", "SPKL",
- "Speakers", "SPKR";
-
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
- };
-
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- };
- };
-
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
@@ -376,19 +346,6 @@
};
};
-&hsi2c_5 {
- status = "okay";
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@@ -400,10 +357,6 @@
};
};
-&i2s0 {
- status = "okay";
-};
-
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb822..9c0cea99c996 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f320..d8647a469a86 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3";
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 1/2] ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
@ 2015-09-14 0:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2015-09-14 0:47 UTC (permalink / raw
To: Kukjin Kim, Krzysztof Kozlowski,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA
Cc: Javier Martinez Canillas
The Odroid XU4 board does not have audio codec so before adding DTS for
new board split the audio codec to separate DTSI file. Include the audio codec
DTSI in Odroid XU3 and XU3-Lite boards.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
---
Changes since v2:
1. Add Javier's reviewed-by.
Changes since v1:
1. New patch (refactor).
---
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 61 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 47 -----------------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 1 +
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 1 +
4 files changed, 63 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000000..9493923ec652
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 90d298dce851..2f0fb8678e9f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -80,36 +80,6 @@
};
};
- sound: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "Odroid-XU3";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speakers", "Speakers";
- simple-audio-card,routing =
- "Headphone Jack", "HPL",
- "Headphone Jack", "HPR",
- "Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
- "Speakers", "SPKL",
- "Speakers", "SPKR";
-
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
- };
-
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- };
- };
-
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
@@ -376,19 +346,6 @@
};
};
-&hsi2c_5 {
- status = "okay";
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@@ -400,10 +357,6 @@
};
};
-&i2s0 {
- status = "okay";
-};
-
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb822..9c0cea99c996 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f320..d8647a469a86 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 1/2] ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
@ 2015-09-14 0:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2015-09-14 0:47 UTC (permalink / raw
To: linux-arm-kernel
The Odroid XU4 board does not have audio codec so before adding DTS for
new board split the audio codec to separate DTSI file. Include the audio codec
DTSI in Odroid XU3 and XU3-Lite boards.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v2:
1. Add Javier's reviewed-by.
Changes since v1:
1. New patch (refactor).
---
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 61 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 47 -----------------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 1 +
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 1 +
4 files changed, 63 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000000..9493923ec652
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090 at 10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 90d298dce851..2f0fb8678e9f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -80,36 +80,6 @@
};
};
- sound: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "Odroid-XU3";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speakers", "Speakers";
- simple-audio-card,routing =
- "Headphone Jack", "HPL",
- "Headphone Jack", "HPR",
- "Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
- "Speakers", "SPKL",
- "Speakers", "SPKR";
-
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
- };
-
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- };
- };
-
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
@@ -376,19 +346,6 @@
};
};
-&hsi2c_5 {
- status = "okay";
- max98090: max98090 at 10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@@ -400,10 +357,6 @@
};
};
-&i2s0 {
- status = "okay";
-};
-
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb822..9c0cea99c996 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f320..d8647a469a86 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3";
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 2/2] ARM: dts: Add exynos5422-odroidxu4 board
2015-09-14 0:47 ` Krzysztof Kozlowski
@ 2015-09-14 0:47 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2015-09-14 0:47 UTC (permalink / raw
To: Kukjin Kim, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-kernel, linux-samsung-soc
Cc: Javier Martinez Canillas
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs
from Odroid XU3 and XU3-Lite by:
1. No green and red LEDs (except standard red power LED).
2. Only two PWM outputs are used (fan and blue LED)
3. No audio codec.
4. Two USB3 ports in host mode (no micro USB3 connector for OTG).
5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514).
6. Additional connector with IO ports (I2S_0, I2C_5).
7. No DisplayPort (like XU3-Lite).
8. No TI INA231 power measurement sensors (like XU3-Lite).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v2:
1. Rebase on top v2 "ARM: dts: Fix LEDs on exynos5422-odroidxu3"
https://lkml.org/lkml/2015/9/13/18
This means that on new Odroid XU4 DTS the PWM outputs are
already fixed.
2. Add Javier's reviewed-by.
Changes since v1:
1. hsi2c_5 and is20 are disabled on Odroid XU4 (after moving these nodes
to the audio DTSI).
2. Update Samsung's copyright date for XU4 DTS.
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 50 +---------------------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 50 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 50 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 +++++++++++++++++++++
5 files changed, 150 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab..3d27fe34647f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
+ exynos5422-odroidxu4.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 2f0fb8678e9f..a83d569baea8 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -46,40 +46,6 @@
reset-gpios = <&gpd1 0 1>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
-
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
@@ -417,18 +383,6 @@
};
};
-&pwm {
- /*
- * PWM 0 -- fan
- * PWM 1 -- Green LED
- * PWM 2 -- Blue LED
- * PWM 3 -- on MIPI connector for backlight
- */
- pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
status = "okay";
@@ -464,9 +418,7 @@
dr_mode = "host";
};
-&usbdrd_dwc3_1 {
- dr_mode = "otg";
-};
+/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 9c0cea99c996..b1b36081f343 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -18,4 +18,54 @@
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index d8647a469a86..0c0bbdbfd85f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -17,6 +17,40 @@
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
};
&i2c_0 {
@@ -50,3 +84,19 @@
shunt-resistor = <10000>;
};
};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000000..2faf88627a48
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,48 @@
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU4";
+ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm0_out &pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>, <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 2/2] ARM: dts: Add exynos5422-odroidxu4 board
@ 2015-09-14 0:47 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2015-09-14 0:47 UTC (permalink / raw
To: linux-arm-kernel
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs
from Odroid XU3 and XU3-Lite by:
1. No green and red LEDs (except standard red power LED).
2. Only two PWM outputs are used (fan and blue LED)
3. No audio codec.
4. Two USB3 ports in host mode (no micro USB3 connector for OTG).
5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514).
6. Additional connector with IO ports (I2S_0, I2C_5).
7. No DisplayPort (like XU3-Lite).
8. No TI INA231 power measurement sensors (like XU3-Lite).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v2:
1. Rebase on top v2 "ARM: dts: Fix LEDs on exynos5422-odroidxu3"
https://lkml.org/lkml/2015/9/13/18
This means that on new Odroid XU4 DTS the PWM outputs are
already fixed.
2. Add Javier's reviewed-by.
Changes since v1:
1. hsi2c_5 and is20 are disabled on Odroid XU4 (after moving these nodes
to the audio DTSI).
2. Update Samsung's copyright date for XU4 DTS.
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 50 +---------------------
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 50 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 50 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 +++++++++++++++++++++
5 files changed, 150 insertions(+), 49 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 233159d2eaab..3d27fe34647f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
+ exynos5422-odroidxu4.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 2f0fb8678e9f..a83d569baea8 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -46,40 +46,6 @@
reset-gpios = <&gpd1 0 1>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
-
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 20972 0>;
@@ -417,18 +383,6 @@
};
};
-&pwm {
- /*
- * PWM 0 -- fan
- * PWM 1 -- Green LED
- * PWM 2 -- Blue LED
- * PWM 3 -- on MIPI connector for backlight
- */
- pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
status = "okay";
@@ -464,9 +418,7 @@
dr_mode = "host";
};
-&usbdrd_dwc3_1 {
- dr_mode = "otg";
-};
+/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 9c0cea99c996..b1b36081f343 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -18,4 +18,54 @@
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index d8647a469a86..0c0bbdbfd85f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -17,6 +17,40 @@
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
};
&i2c_0 {
@@ -50,3 +84,19 @@
shunt-resistor = <10000>;
};
};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000000..2faf88627a48
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,48 @@
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU4";
+ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm0_out &pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>, <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 1/2] ARM: dts: Split audio configuration to separateexynos5422-odroidxu3-audio
2015-09-14 0:47 ` Krzysztof Kozlowski
@ 2015-09-15 22:35 ` Kukjin Kim
-1 siblings, 0 replies; 7+ messages in thread
From: Kukjin Kim @ 2015-09-15 22:35 UTC (permalink / raw
To: Krzysztof Kozlowski
Cc: Kukjin Kim, devicetree, linux-arm-kernel, linux-kernel,
linux-samsung-soc, Javier Martinez Canillas
On 09/14/15 09:47, Krzysztof Kozlowski wrote:
> The Odroid XU4 board does not have audio codec so before adding DTS for
> new board split the audio codec to separate DTSI file. Include the audio codec
> DTSI in Odroid XU3 and XU3-Lite boards.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
Applied 1-2.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 1/2] ARM: dts: Split audio configuration to separateexynos5422-odroidxu3-audio
@ 2015-09-15 22:35 ` Kukjin Kim
0 siblings, 0 replies; 7+ messages in thread
From: Kukjin Kim @ 2015-09-15 22:35 UTC (permalink / raw
To: linux-arm-kernel
On 09/14/15 09:47, Krzysztof Kozlowski wrote:
> The Odroid XU4 board does not have audio codec so before adding DTS for
> new board split the audio codec to separate DTSI file. Include the audio codec
> DTSI in Odroid XU3 and XU3-Lite boards.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
Applied 1-2.
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-09-15 22:36 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-14 0:47 [PATCH v3 1/2] ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio Krzysztof Kozlowski
2015-09-14 0:47 ` Krzysztof Kozlowski
2015-09-14 0:47 ` Krzysztof Kozlowski
2015-09-14 0:47 ` [PATCH v3 2/2] ARM: dts: Add exynos5422-odroidxu4 board Krzysztof Kozlowski
2015-09-14 0:47 ` Krzysztof Kozlowski
2015-09-15 22:35 ` [PATCH v3 1/2] ARM: dts: Split audio configuration to separateexynos5422-odroidxu3-audio Kukjin Kim
2015-09-15 22:35 ` Kukjin Kim
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.