From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Mon, 14 Sep 2015 16:29:21 +0200 Subject: [U-Boot] [PATCH v2] malloc_simple: Add support for switching to DRAM heap Message-ID: <1442240961-14177-1-git-send-email-hdegoede@redhat.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de malloc_simple uses a part of the stack as heap, initially it uses SYS_MALLOC_F_LEN bytes which typically is quite small as the initial stacks sits in SRAM and we do not have that much SRAM to work with. When DRAM becomes available we may switch the stack from SRAM to DRAM to give use more room. This commit adds support for also switching to a new bigger malloc_simple heap located in the new stack. Note that this requires spl_init to be called before spl_relocate_stack_gd which in practice means that spl_init must be called from board_init_f. Signed-off-by: Hans de Goede --- Changes in v2: -Panic if spl_init is not called before switching the heap from SRAM to DRAM, spl_init will set up the malloc_limit to SYS_MALLOC_F_LEN bytes, which is the SRAM limit and as such MUST be called before --- Kconfig | 10 ++++++++++ common/spl/spl.c | 12 ++++++++++++ 2 files changed, 22 insertions(+) diff --git a/Kconfig b/Kconfig index 0ae4fab..86088bc 100644 --- a/Kconfig +++ b/Kconfig @@ -142,6 +142,16 @@ config SPL_STACK_R_ADDR Specify the address in SDRAM for the SPL stack. This will be set up before board_init_r() is called. +config SPL_STACK_R_MALLOC_SIMPLE_LEN + depends on SPL_STACK_R && SPL_MALLOC_SIMPLE + hex "Size of malloc_simple heap after switching to DRAM SPL stack" + default 0x100000 + help + Specify the amount of the stack to use as memory pool for + malloc_simple after switching the stack to DRAM. This may be set + to give board_init_r() a larger heap then the initial heap in + SRAM which is limited to SYS_MALLOC_F_LEN bytes. + config TPL bool depends on SPL && SUPPORT_TPL diff --git a/common/spl/spl.c b/common/spl/spl.c index b09a626..f687144 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -347,6 +347,18 @@ ulong spl_relocate_stack_gd(void) memcpy(new_gd, (void *)gd, sizeof(gd_t)); gd = new_gd; +#ifdef CONFIG_SPL_MALLOC_SIMPLE + if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { + if (!(gd->flags & GD_FLG_SPL_INIT)) + panic("spl_init must be called before heap realloc"); + + ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; + gd->malloc_base = ptr; + gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; + gd->malloc_ptr = 0; + } +#endif + return ptr; #else return 0; -- 2.4.3