* [PATCH] powerpc/powernv: Enable reading and updating of system parameters
@ 2014-03-07 5:32 Neelesh Gupta
0 siblings, 0 replies; only message in thread
From: Neelesh Gupta @ 2014-03-07 5:32 UTC (permalink / raw
To: linuxppc-dev
This patch enables reading and updating of system parameters through
OPAL call.
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/opal.h | 14 +
arch/powerpc/platforms/powernv/Makefile | 2
arch/powerpc/platforms/powernv/opal-sysparam.c | 290 ++++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 2
arch/powerpc/platforms/powernv/opal.c | 2
5 files changed, 309 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/platforms/powernv/opal-sysparam.c
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 90fad59..60b3edc 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -159,6 +159,8 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_GET_MSG 85
#define OPAL_CHECK_ASYNC_COMPLETION 86
#define OPAL_SYNC_HOST_REBOOT 87
+#define OPAL_GET_PARAM 89
+#define OPAL_SET_PARAM 90
#ifndef __ASSEMBLY__
@@ -398,6 +400,13 @@ enum OpalLPCAddressType {
OPAL_LPC_FW = 2,
};
+/* System parameter permission */
+enum OpalSysparamPerm {
+ OPAL_SYSPARAM_READ = 0x1,
+ OPAL_SYSPARAM_WRITE = 0x2,
+ OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
+};
+
struct opal_msg {
uint32_t msg_type;
uint32_t reserved;
@@ -834,6 +843,10 @@ int64_t opal_update_flash(uint64_t blk_list);
int64_t opal_get_msg(uint64_t buffer, size_t size);
int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token);
int64_t opal_sync_host_reboot(void);
+int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
+ size_t length);
+int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
+ size_t length);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
@@ -871,6 +884,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
extern unsigned long opal_get_boot_time(void);
extern void opal_nvram_init(void);
extern void opal_flash_init(void);
+extern void opal_sys_param_init(void);
extern int opal_machine_check(struct pt_regs *regs);
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index c0f85ea..e6166d3 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,5 +1,5 @@
obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
-obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
+obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o opal-sysparam.o
obj-y += rng.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/powerpc/platforms/powernv/opal-sysparam.c b/arch/powerpc/platforms/powernv/opal-sysparam.c
new file mode 100644
index 0000000..0bd249a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-sysparam.c
@@ -0,0 +1,290 @@
+/*
+ * PowerNV system parameter code
+ *
+ * Copyright (C) 2013 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gfp.h>
+#include <linux/stat.h>
+#include <asm/opal.h>
+
+#define MAX_PARAM_DATA_LEN 64
+
+static DEFINE_MUTEX(opal_sysparam_mutex);
+static struct kobject *sysparam_kobj;
+static void *param_data_buf;
+
+struct param_attr {
+ struct list_head list;
+ u32 param_id;
+ u32 param_size;
+ struct kobj_attribute kobj_attr;
+};
+
+static int opal_get_sys_param(u32 param_id, u32 length, void *buffer)
+{
+ struct opal_msg msg;
+ int ret, token;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ if (token != -ERESTARTSYS)
+ pr_err("%s: Couldn't get the token, returning\n",
+ __func__);
+ ret = token;
+ goto out;
+ }
+
+ ret = opal_get_param(token, param_id, (u64)buffer, length);
+ if (ret != OPAL_ASYNC_COMPLETION)
+ goto out_token;
+
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_err("%s: Failed to wait for the async response, %d\n",
+ __func__, ret);
+ goto out_token;
+ }
+
+ ret = msg.params[1];
+
+out_token:
+ opal_async_release_token(token);
+out:
+ return ret;
+}
+
+static int opal_set_sys_param(u32 param_id, u32 length, void *buffer)
+{
+ struct opal_msg msg;
+ int ret, token;
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0) {
+ if (token != -ERESTARTSYS)
+ pr_err("%s: Couldn't get the token, returning\n",
+ __func__);
+ ret = token;
+ goto out;
+ }
+
+ ret = opal_set_param(token, param_id, (u64)buffer, length);
+
+ if (ret != OPAL_ASYNC_COMPLETION)
+ goto out_token;
+
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_err("%s: Failed to wait for the async response, %d\n",
+ __func__, ret);
+ goto out_token;
+ }
+
+ ret = msg.params[1];
+
+out_token:
+ opal_async_release_token(token);
+out:
+ return ret;
+}
+
+static ssize_t sys_param_show(struct kobject *kobj,
+ struct kobj_attribute *kobj_attr, char *buf)
+{
+ struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+ kobj_attr);
+ int ret;
+
+ mutex_lock(&opal_sysparam_mutex);
+ ret = opal_get_sys_param(attr->param_id, attr->param_size,
+ param_data_buf);
+ if (ret)
+ goto out;
+
+ memcpy(buf, param_data_buf, attr->param_size);
+
+out:
+ mutex_unlock(&opal_sysparam_mutex);
+ return ret ? ret : attr->param_size;
+}
+
+static ssize_t sys_param_store(struct kobject *kobj,
+ struct kobj_attribute *kobj_attr, const char *buf, size_t count)
+{
+ struct param_attr *attr = container_of(kobj_attr, struct param_attr,
+ kobj_attr);
+ int ret;
+
+ mutex_lock(&opal_sysparam_mutex);
+ memcpy(param_data_buf, buf, count);
+ ret = opal_set_sys_param(attr->param_id, attr->param_size,
+ param_data_buf);
+ mutex_unlock(&opal_sysparam_mutex);
+ return ret ? ret : count;
+}
+
+void __init opal_sys_param_init(void)
+{
+ struct device_node *sysparam;
+ struct param_attr *attr;
+ u32 *id, *size;
+ int count, i;
+ u8 *perm;
+
+ if (!opal_kobj) {
+ pr_warn("SYSPARAM: opal kobject is not available\n");
+ goto out;
+ }
+
+ sysparam_kobj = kobject_create_and_add("sysparams", opal_kobj);
+ if (!sysparam_kobj) {
+ pr_err("SYSPARAM: Failed to create sysparam kobject\n");
+ goto out;
+ }
+
+ /* Allocate big enough buffer for any get/set transactions */
+ param_data_buf = kzalloc(MAX_PARAM_DATA_LEN, GFP_KERNEL);
+ if (!param_data_buf) {
+ pr_err("SYSPARAM: Failed to allocate memory for param data "
+ "buf\n");
+ goto out_kobj_put;
+ }
+
+ sysparam = of_find_node_by_path("/ibm,opal/sysparams");
+ if (!sysparam) {
+ pr_err("SYSPARAM: Opal sysparam node not found\n");
+ goto out_param_buf;
+ }
+
+ if (!of_device_is_compatible(sysparam, "ibm,opal-sysparams")) {
+ pr_err("SYSPARAM: Opal sysparam node not compatible\n");
+ goto out_node_put;
+ }
+
+ /* Number of parameters exposed through DT */
+ count = of_property_count_strings(sysparam, "param-name");
+ if (count < 0) {
+ pr_err("SYSPARAM: No string found of property param-name in "
+ "the node %s\n", sysparam->name);
+ goto out_node_put;
+ }
+
+ id = kzalloc(sizeof(*id) * count, GFP_KERNEL);
+ if (!id) {
+ pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+ "id\n");
+ goto out_node_put;
+ }
+
+ size = kzalloc(sizeof(*size) * count, GFP_KERNEL);
+ if (!size) {
+ pr_err("SYSPARAM: Failed to allocate memory to read parameter "
+ "size\n");
+ goto out_free_id;
+ }
+
+ perm = kzalloc(sizeof(*perm) * count, GFP_KERNEL);
+ if (!perm) {
+ pr_err("SYSPARAM: Failed to allocate memory to read supported "
+ "action on the parameter");
+ goto out_free_size;
+ }
+
+ if (of_property_read_u32_array(sysparam, "param-id", id, count)) {
+ pr_err("SYSPARAM: Missing property param-id in the DT\n");
+ goto out_free_perm;
+ }
+
+ if (of_property_read_u32_array(sysparam, "param-len", size, count)) {
+ pr_err("SYSPARAM: Missing propery param-len in the DT\n");
+ goto out_free_perm;
+ }
+
+
+ if (of_property_read_u8_array(sysparam, "param-perm", perm, count)) {
+ pr_err("SYSPARAM: Missing propery param-perm in the DT\n");
+ goto out_free_perm;
+ }
+
+ attr = kzalloc(sizeof(*attr) * count, GFP_KERNEL);
+ if (!attr) {
+ pr_err("SYSPARAM: Failed to allocate memory for parameter "
+ "attributes\n");
+ goto out_free_perm;
+ }
+
+ /* For each of the parameters, populate the parameter attributes */
+ for (i = 0; i < count; i++) {
+ sysfs_attr_init(&attr[i].kobj_attr.attr);
+ attr[i].param_id = id[i];
+ attr[i].param_size = size[i];
+ if (of_property_read_string_index(sysparam, "param-name", i,
+ &attr[i].kobj_attr.attr.name))
+ continue;
+
+ /* If the parameter is read-only or read-write */
+ switch (perm[i] & 3) {
+ case OPAL_SYSPARAM_READ:
+ attr[i].kobj_attr.attr.mode = S_IRUGO;
+ break;
+ case OPAL_SYSPARAM_WRITE:
+ attr[i].kobj_attr.attr.mode = S_IWUGO;
+ break;
+ case OPAL_SYSPARAM_RW:
+ attr[i].kobj_attr.attr.mode = S_IRUGO | S_IWUGO;
+ break;
+ default:
+ break;
+ }
+
+ attr[i].kobj_attr.show = sys_param_show;
+ attr[i].kobj_attr.store = sys_param_store;
+
+ if (sysfs_create_file(sysparam_kobj, &attr[i].kobj_attr.attr)) {
+ pr_err("SYSPARAM: Failed to create sysfs file %s\n",
+ attr[i].kobj_attr.attr.name);
+ goto out_free_attr;
+ }
+ }
+
+ kfree(perm);
+ kfree(size);
+ kfree(id);
+ of_node_put(sysparam);
+ return;
+
+out_free_attr:
+ kfree(attr);
+out_free_perm:
+ kfree(perm);
+out_free_size:
+ kfree(size);
+out_free_id:
+ kfree(id);
+out_node_put:
+ of_node_put(sysparam);
+out_param_buf:
+ kfree(param_data_buf);
+out_kobj_put:
+ kobject_put(sysparam_kobj);
+out:
+ return;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 3e8829c..0afdeca 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -129,3 +129,5 @@ OPAL_CALL(opal_update_flash, OPAL_FLASH_UPDATE);
OPAL_CALL(opal_get_msg, OPAL_GET_MSG);
OPAL_CALL(opal_check_completion, OPAL_CHECK_ASYNC_COMPLETION);
OPAL_CALL(opal_sync_host_reboot, OPAL_SYNC_HOST_REBOOT);
+OPAL_CALL(opal_get_param, OPAL_GET_PARAM);
+OPAL_CALL(opal_set_param, OPAL_SET_PARAM);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 65499ad..4fad36a 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -474,6 +474,8 @@ static int __init opal_init(void)
if (rc == 0) {
/* Setup code update interface */
opal_flash_init();
+ /* Setup system parameters interface */
+ opal_sys_param_init();
}
return 0;
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2014-03-07 5:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-07 5:32 [PATCH] powerpc/powernv: Enable reading and updating of system parameters Neelesh Gupta
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.