From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Marciniszyn Subject: [PATCH v2 17/49] IB/hfi1: add firmware hooks Date: Mon, 15 Jun 2015 09:27:30 -0400 Message-ID: <20150615132730.29741.35880.stgit@phlsvslse11.ph.intel.com> References: <20150615132434.29741.35258.stgit@phlsvslse11.ph.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20150615132434.29741.35258.stgit-K+u1se/DcYrLESAwzcoQNrvm/XP+8Wra@public.gmane.org> Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rdma@vger.kernel.org Signed-off-by: Andrew Friedley Signed-off-by: Arthur Kepner Signed-off-by: Brendan Cunningham Signed-off-by: Brian Welty Signed-off-by: Caz Yokoyama Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Easwar Hariharan Signed-off-by: Harish Chegondi Signed-off-by: Ira Weiny Signed-off-by: Jim Snow Signed-off-by: John Gregor Signed-off-by: Jubin John Signed-off-by: Kaike Wan Signed-off-by: Kevin Pine Signed-off-by: Kyle Liddell Signed-off-by: Mike Marciniszyn Signed-off-by: Mitko Haralanov Signed-off-by: Ravi Krishnaswamy Signed-off-by: Sadanand Warrier Signed-off-by: Sanath Kumar Signed-off-by: Sudeep Dutt Signed-off-by: Vlad Danushevsky --- drivers/infiniband/hw/hfi1/firmware.c | 1550 +++++++++++++++++++++++++++++++++ 1 file changed, 1550 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/firmware.c diff --git a/drivers/infiniband/hw/hfi1/firmware.c b/drivers/infiniband/hw/hfi1/firmware.c new file mode 100644 index 0000000..39cafed --- /dev/null +++ b/drivers/infiniband/hw/hfi1/firmware.c @@ -0,0 +1,1550 @@ +/* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include +#include +#include +#include +#include + +#include "hfi.h" +#include "trace.h" + +/* + * Make it easy to toggle firmware file name and if it gets loaded by + * editing the following. This may be something we do while in development + * but not necessarily something a user would ever need to use. + */ +#define DEFAULT_FW_8051_NAME_FPGA "hfi_dc8051.bin" +#define DEFAULT_FW_8051_NAME_ASIC "hfi1_dc8051.fw" +#define DEFAULT_FW_FABRIC_NAME "hfi1_fabric.fw" +#define DEFAULT_FW_SBUS_NAME "hfi1_sbus.fw" +#define DEFAULT_FW_PCIE_NAME "hfi1_pcie.fw" +#define DEFAULT_PLATFORM_CONFIG_NAME "hfi1_platform.dat" + +static uint fw_8051_load = 1; +static uint fw_fabric_serdes_load = 1; +static uint fw_pcie_serdes_load = 1; +static uint fw_sbus_load = 1; +static uint platform_config_load = 1; + +/* Firmware file names get set in hfi1_firmware_init() based on the above */ +static char *fw_8051_name; +static char *fw_fabric_serdes_name; +static char *fw_sbus_name; +static char *fw_pcie_serdes_name; +static char *platform_config_name; + +#define SBUS_MAX_POLL_COUNT 100 +#define SBUS_COUNTER(reg, name) \ + (((reg) >> ASIC_STS_SBUS_COUNTERS_##name##_CNT_SHIFT) & \ + ASIC_STS_SBUS_COUNTERS_##name##_CNT_MASK) + +/* + * Firmware security header. + */ +struct css_header { + u32 module_type; + u32 header_len; + u32 header_version; + u32 module_id; + u32 module_vendor; + u32 date; /* BCD yyyymmdd */ + u32 size; /* in DWORDs */ + u32 key_size; /* in DWORDs */ + u32 modulus_size; /* in DWORDs */ + u32 exponent_size; /* in DWORDs */ + u32 reserved[22]; +}; +/* expected field values */ +#define CSS_MODULE_TYPE 0x00000006 +#define CSS_HEADER_LEN 0x000000a1 +#define CSS_HEADER_VERSION 0x00010000 +#define CSS_MODULE_VENDOR 0x00008086 + +#define KEY_SIZE 256 +#define MU_SIZE 8 +#define EXPONENT_SIZE 4 + +/* the file itself */ +struct firmware_file { + struct css_header css_header; + u8 modulus[KEY_SIZE]; + u8 exponent[EXPONENT_SIZE]; + u8 signature[KEY_SIZE]; + u8 firmware[]; +}; + +struct augmented_firmware_file { + struct css_header css_header; + u8 modulus[KEY_SIZE]; + u8 exponent[EXPONENT_SIZE]; + u8 signature[KEY_SIZE]; + u8 r2[KEY_SIZE]; + u8 mu[MU_SIZE]; + u8 firmware[]; +}; + +/* augmented file size difference */ +#define AUGMENT_SIZE (sizeof(struct augmented_firmware_file) - \ + sizeof(struct firmware_file)) + +struct firmware_details { + /* Linux core piece */ + const struct firmware *fw; + + struct css_header *css_header; + u8 *firmware_ptr; /* pointer to binary data */ + u32 firmware_len; /* length in bytes */ + u8 *modulus; /* pointer to the modulus */ + u8 *exponent; /* pointer to the exponent */ + u8 *signature; /* pointer to the signature */ + u8 *r2; /* pointer to r2 */ + u8 *mu; /* pointer to mu */ + struct augmented_firmware_file dummy_header; +}; + +/* + * The mutex protects fw_state, fw_err, and all of the firmware_details + * variables. + */ +static DEFINE_MUTEX(fw_mutex); +enum fw_state { + FW_EMPTY, + FW_ACQUIRED, + FW_ERR +}; +static enum fw_state fw_state = FW_EMPTY; +static int fw_err; +static struct firmware_details fw_8051; +static struct firmware_details fw_fabric; +static struct firmware_details fw_pcie; +static struct firmware_details fw_sbus; +static const struct firmware *platform_config; + +/* flags for turn_off_spicos() */ +#define SPICO_SBUS 0x1 +#define SPICO_FABRIC 0x2 +#define ENABLE_SPICO_SMASK 0x1 + +/* security block commands */ +#define RSA_CMD_INIT 0x1 +#define RSA_CMD_START 0x2 + +/* security block status */ +#define RSA_STATUS_IDLE 0x0 +#define RSA_STATUS_ACTIVE 0x1 +#define RSA_STATUS_DONE 0x2 +#define RSA_STATUS_FAILED 0x3 + +/* RSA engine timeout, in ms */ +#define RSA_ENGINE_TIMEOUT 100 /* ms */ + +/* hardware mutex timeout, in ms */ +#define HM_TIMEOUT 4000 /* 4 s */ + +/* 8051 memory access timeout, in us */ +#define DC8051_ACCESS_TIMEOUT 100 /* us */ + +/* the number of fabric SerDes on the SBus */ +#define NUM_FABRIC_SERDES 4 + +/* SBus fabric SerDes addresses, one set per HFI */ +static const u8 fabric_serdes_addrs[2][NUM_FABRIC_SERDES] = { + { 0x01, 0x02, 0x03, 0x04 }, + { 0x28, 0x29, 0x2a, 0x2b } +}; + +/* SBus PCIe SerDes addresses, one set per HFI */ +static const u8 pcie_serdes_addrs[2][NUM_PCIE_SERDES] = { + { 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, + 0x18, 0x1a, 0x1c, 0x1e, 0x20, 0x22, 0x24, 0x26 }, + { 0x2f, 0x31, 0x33, 0x35, 0x37, 0x39, 0x3b, 0x3d, + 0x3f, 0x41, 0x43, 0x45, 0x47, 0x49, 0x4b, 0x4d } +}; + +/* SBus PCIe PCS addresses, one set per HFI */ +const u8 pcie_pcs_addrs[2][NUM_PCIE_SERDES] = { + { 0x09, 0x0b, 0x0d, 0x0f, 0x11, 0x13, 0x15, 0x17, + 0x19, 0x1b, 0x1d, 0x1f, 0x21, 0x23, 0x25, 0x27 }, + { 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e, + 0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e } +}; + +/* SBus fabric SerDes broadcast addresses, one per HFI */ +static const u8 fabric_serdes_broadcast[2] = { 0xe4, 0xe5 }; +static const u8 all_fabric_serdes_broadcast = 0xe1; + +/* SBus PCIe SerDes broadcast addresses, one per HFI */ +const u8 pcie_serdes_broadcast[2] = { 0xe2, 0xe3 }; +static const u8 all_pcie_serdes_broadcast = 0xe0; + +/* forwards */ +static void dispose_one_firmware(struct firmware_details *fdet); + +/* + * Write data or code to the 8051 code or data RAM. + */ +static int write_8051(struct hfi1_devdata *dd, int code, u32 start, + const u8 *data, u32 len) +{ + u64 reg; + u32 offset; + int aligned, count; + + /* check alignment */ + aligned = ((unsigned long)data & 0x7) == 0; + + /* write set-up */ + reg = (code ? DC_DC8051_CFG_RAM_ACCESS_SETUP_RAM_SEL_SMASK : 0ull) + | DC_DC8051_CFG_RAM_ACCESS_SETUP_AUTO_INCR_ADDR_SMASK; + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, reg); + + reg = ((start & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK) + << DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT) + | DC_DC8051_CFG_RAM_ACCESS_CTRL_WRITE_ENA_SMASK; + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg); + + /* write */ + for (offset = 0; offset < len; offset += 8) { + int bytes = len - offset; + + if (bytes < 8) { + reg = 0; + memcpy(®, &data[offset], bytes); + } else if (aligned) { + reg = *(u64 *)&data[offset]; + } else { + memcpy(®, &data[offset], 8); + } + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_WR_DATA, reg); + + /* wait until ACCESS_COMPLETED is set */ + count = 0; + while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS) + & DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK) + == 0) { + count++; + if (count > DC8051_ACCESS_TIMEOUT) { + dd_dev_err(dd, "timeout writing 8051 data\n"); + return -ENXIO; + } + udelay(1); + } + } + + /* turn off write access, auto increment (also sets to data access) */ + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0); + write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0); + + return 0; +} + +/* return 0 if values match, non-zero and complain otherwise */ +static int invalid_header(struct hfi1_devdata *dd, const char *what, + u32 actual, u32 expected) +{ + if (actual == expected) + return 0; + + dd_dev_err(dd, + "invalid firmware header field %s: expected 0x%x, actual 0x%x\n", + what, expected, actual); + return 1; +} + +/* + * Verify that the static fields in the CSS header match. + */ +static int verify_css_header(struct hfi1_devdata *dd, struct css_header *css) +{ + /* verify CSS header fields (most sizes are in DW, so add /4) */ + if (invalid_header(dd, "module_type", css->module_type, CSS_MODULE_TYPE) + || invalid_header(dd, "header_len", css->header_len, + (sizeof(struct firmware_file)/4)) + || invalid_header(dd, "header_version", + css->header_version, CSS_HEADER_VERSION) + || invalid_header(dd, "module_vendor", + css->module_vendor, CSS_MODULE_VENDOR) + || invalid_header(dd, "key_size", + css->key_size, KEY_SIZE/4) + || invalid_header(dd, "modulus_size", + css->modulus_size, KEY_SIZE/4) + || invalid_header(dd, "exponent_size", + css->exponent_size, EXPONENT_SIZE/4)) { + return -EINVAL; + } + return 0; +} + +/* + * Make sure there are at least some bytes after the prefix. + */ +static int payload_check(struct hfi1_devdata *dd, const char *name, + long file_size, long prefix_size) +{ + /* make sure we have some payload */ + if (prefix_size >= file_size) { + dd_dev_err(dd, + "firmware \"%s\", size %ld, must be larger than %ld bytes\n", + name, file_size, prefix_size); + return -EINVAL; + } + + return 0; +} + +/* + * Request the firmware from the system. Extract the pieces and fill in + * fdet. If successful, the caller will need to call dispose_one_firmware(). + * Returns 0 on success, -ERRNO on error. + */ +static int obtain_one_firmware(struct hfi1_devdata *dd, const char *name, + struct firmware_details *fdet) +{ + struct css_header *css; + int ret; + + memset(fdet, 0, sizeof(*fdet)); + + ret = request_firmware(&fdet->fw, name, &dd->pcidev->dev); + if (ret) { + dd_dev_err(dd, "cannot load firmware \"%s\", err %d\n", + name, ret); + return ret; + } + + /* verify the firmware */ + if (fdet->fw->size < sizeof(struct css_header)) { + dd_dev_err(dd, "firmware \"%s\" is too small\n", name); + ret = -EINVAL; + goto done; + } + css = (struct css_header *)fdet->fw->data; + + hfi1_cdbg(FIRMWARE, "Firmware %s details:", name); + hfi1_cdbg(FIRMWARE, "file size: 0x%lx bytes", fdet->fw->size); + hfi1_cdbg(FIRMWARE, "CSS structure:"); + hfi1_cdbg(FIRMWARE, " module_type 0x%x", css->module_type); + hfi1_cdbg(FIRMWARE, " header_len 0x%03x (0x%03x bytes)", + css->header_len, 4 * css->header_len); + hfi1_cdbg(FIRMWARE, " header_version 0x%x", css->header_version); + hfi1_cdbg(FIRMWARE, " module_id 0x%x", css->module_id); + hfi1_cdbg(FIRMWARE, " module_vendor 0x%x", css->module_vendor); + hfi1_cdbg(FIRMWARE, " date 0x%x", css->date); + hfi1_cdbg(FIRMWARE, " size 0x%03x (0x%03x bytes)", + css->size, 4 * css->size); + hfi1_cdbg(FIRMWARE, " key_size 0x%03x (0x%03x bytes)", + css->key_size, 4 * css->key_size); + hfi1_cdbg(FIRMWARE, " modulus_size 0x%03x (0x%03x bytes)", + css->modulus_size, 4 * css->modulus_size); + hfi1_cdbg(FIRMWARE, " exponent_size 0x%03x (0x%03x bytes)", + css->exponent_size, 4 * css->exponent_size); + hfi1_cdbg(FIRMWARE, "firmware size: 0x%lx bytes", + fdet->fw->size - sizeof(struct firmware_file)); + + /* + * If the file does not have a valid CSS header, fail. + * Otherwise, check the CSS size field for an expected size. + * The augmented file has r2 and mu inserted after the header + * was generated, so there will be a known difference between + * the CSS header size and the actual file size. Use this + * difference to identify an augmented file. + * + * Note: css->size is in DWORDs, multiply by 4 to get bytes. + */ + ret = verify_css_header(dd, css); + if (ret) { + dd_dev_info(dd, "Invalid CSS header for \"%s\"\n", name); + } else if ((css->size*4) == fdet->fw->size) { + /* non-augmented firmware file */ + struct firmware_file *ff = (struct firmware_file *) + fdet->fw->data; + + /* make sure there are bytes in the payload */ + ret = payload_check(dd, name, fdet->fw->size, + sizeof(struct firmware_file)); + if (ret == 0) { + fdet->css_header = css; + fdet->modulus = ff->modulus; + fdet->exponent = ff->exponent; + fdet->signature = ff->signature; + fdet->r2 = fdet->dummy_header.r2; /* use dummy space */ + fdet->mu = fdet->dummy_header.mu; /* use dummy space */ + fdet->firmware_ptr = ff->firmware; + fdet->firmware_len = fdet->fw->size - + sizeof(struct firmware_file); + /* + * Header does not include r2 and mu - generate here. + * For now, fail. + */ + dd_dev_err(dd, "driver is unable to validate firmware without r2 and mu (not in firmware file)\n"); + ret = -EINVAL; + } + } else if ((css->size*4) + AUGMENT_SIZE == fdet->fw->size) { + /* augmented firmware file */ + struct augmented_firmware_file *aff = + (struct augmented_firmware_file *)fdet->fw->data; + + /* make sure there are bytes in the payload */ + ret = payload_check(dd, name, fdet->fw->size, + sizeof(struct augmented_firmware_file)); + if (ret == 0) { + fdet->css_header = css; + fdet->modulus = aff->modulus; + fdet->exponent = aff->exponent; + fdet->signature = aff->signature; + fdet->r2 = aff->r2; + fdet->mu = aff->mu; + fdet->firmware_ptr = aff->firmware; + fdet->firmware_len = fdet->fw->size - + sizeof(struct augmented_firmware_file); + } + } else { + /* css->size check failed */ + dd_dev_err(dd, + "invalid firmware header field size: expected 0x%lx or 0x%lx, actual 0x%x\n", + fdet->fw->size/4, (fdet->fw->size - AUGMENT_SIZE)/4, + css->size); + + ret = -EINVAL; + } + +done: + /* if returning an error, clean up after ourselves */ + if (ret) + dispose_one_firmware(fdet); + return ret; +} + +static void dispose_one_firmware(struct firmware_details *fdet) +{ + release_firmware(fdet->fw); + fdet->fw = NULL; +} + +/* + * Called by all HFIs when loading their firmware - i.e. device probe time. + * The first one will do the actual firmware load. Use a mutex to resolve + * any possible race condition. + * + * The call to this routine cannot be moved to driver load because the kernel + * call request_firmware() requires a device which is only available after + * the first device probe. + */ +static int obtain_firmware(struct hfi1_devdata *dd) +{ + int err = 0; + + mutex_lock(&fw_mutex); + if (fw_state == FW_ACQUIRED) { + goto done; /* already acquired */ + } else if (fw_state == FW_ERR) { + err = fw_err; + goto done; /* already tried and failed */ + } + + if (fw_8051_load) { + err = obtain_one_firmware(dd, fw_8051_name, &fw_8051); + if (err) + goto done; + } + + if (fw_fabric_serdes_load) { + err = obtain_one_firmware(dd, fw_fabric_serdes_name, + &fw_fabric); + if (err) + goto done; + } + + if (fw_sbus_load) { + err = obtain_one_firmware(dd, fw_sbus_name, &fw_sbus); + if (err) + goto done; + } + + if (fw_pcie_serdes_load) { + err = obtain_one_firmware(dd, fw_pcie_serdes_name, &fw_pcie); + if (err) + goto done; + } + + if (platform_config_load) { + platform_config = NULL; + err = request_firmware(&platform_config, platform_config_name, + &dd->pcidev->dev); + if (err) { + err = 0; + platform_config = NULL; + } + } + + /* success */ + fw_state = FW_ACQUIRED; + +done: + if (err) { + fw_err = err; + fw_state = FW_ERR; + } + mutex_unlock(&fw_mutex); + + return err; +} + +/* + * Called when the driver unloads. The timing is asymmetric with its + * counterpart, obtain_firmware(). If called at device remove time, + * then it is conceivable that another device could probe while the + * firmware is being disposed. The mutexes can be moved to do that + * safely, but then the firmware would be requested from the OS multiple + * times. + * + * No mutex is needed as the driver is unloading and there cannot be any + * other callers. + */ +void dispose_firmware(void) +{ + dispose_one_firmware(&fw_8051); + dispose_one_firmware(&fw_fabric); + dispose_one_firmware(&fw_pcie); + dispose_one_firmware(&fw_sbus); + + release_firmware(platform_config); + platform_config = NULL; + + /* retain the error state, otherwise revert to empty */ + if (fw_state != FW_ERR) + fw_state = FW_EMPTY; +} + +/* + * Write a block of data to a given array CSR. All calls will be in + * multiples of 8 bytes. + */ +static void write_rsa_data(struct hfi1_devdata *dd, int what, + const u8 *data, int nbytes) +{ + int qw_size = nbytes/8; + int i; + + if (((unsigned long)data & 0x7) == 0) { + /* aligned */ + u64 *ptr = (u64 *)data; + + for (i = 0; i < qw_size; i++, ptr++) + write_csr(dd, what + (8*i), *ptr); + } else { + /* not aligned */ + for (i = 0; i < qw_size; i++, data += 8) { + u64 value; + + memcpy(&value, data, 8); + write_csr(dd, what + (8*i), value); + } + } +} + +/* + * Write a block of data to a given CSR as a stream of writes. All calls will + * be in multiples of 8 bytes. + */ +static void write_streamed_rsa_data(struct hfi1_devdata *dd, int what, + const u8 *data, int nbytes) +{ + u64 *ptr = (u64 *)data; + int qw_size = nbytes/8; + + for (; qw_size > 0; qw_size--, ptr++) + write_csr(dd, what, *ptr); +} + +/* + * Download the signature and start the RSA mechanism. Wait for + * RSA_ENGINE_TIMEOUT before giving up. + */ +static int run_rsa(struct hfi1_devdata *dd, const char *who, + const u8 *signature) +{ + unsigned long timeout; + u64 reg; + u32 status; + int ret = 0; + + /* write the signature */ + write_rsa_data(dd, MISC_CFG_RSA_SIGNATURE, signature, KEY_SIZE); + + /* initialize RSA */ + write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_INIT); + + /* + * Make sure the engine is idle and insert a delay between the two + * writes to MISC_CFG_RSA_CMD. + */ + status = (read_csr(dd, MISC_CFG_FW_CTRL) + & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK) + >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT; + if (status != RSA_STATUS_IDLE) { + dd_dev_err(dd, "%s security engine not idle - giving up\n", + who); + return -EBUSY; + } + + /* start RSA */ + write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_START); + + /* + * Look for the result. + * + * The RSA engine is hooked up to two MISC errors. The driver + * masks these errors as they do not respond to the standard + * error "clear down" mechanism. Look for these errors here and + * clear them when possible. This routine will exit with the + * errors of the current run still set. + * + * MISC_FW_AUTH_FAILED_ERR + * Firmware authorization failed. This can be cleared by + * re-initializing the RSA engine, then clearing the status bit. + * Do not re-init the RSA angine immediately after a successful + * run - this will reset the current authorization. + * + * MISC_KEY_MISMATCH_ERR + * Key does not match. The only way to clear this is to load + * a matching key then clear the status bit. If this error + * is raised, it will persist outside of this routine until a + * matching key is loaded. + */ + timeout = msecs_to_jiffies(RSA_ENGINE_TIMEOUT) + jiffies; + while (1) { + status = (read_csr(dd, MISC_CFG_FW_CTRL) + & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK) + >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT; + + if (status == RSA_STATUS_IDLE) { + /* should not happen */ + dd_dev_err(dd, "%s firmware security bad idle state\n", + who); + ret = -EINVAL; + break; + } else if (status == RSA_STATUS_DONE) { + /* finished successfully */ + break; + } else if (status == RSA_STATUS_FAILED) { + /* finished unsuccessfully */ + ret = -EINVAL; + break; + } + /* else still active */ + + if (time_after(jiffies, timeout)) { + /* + * Timed out while active. We can't reset the engine + * if it is stuck active, but run through the + * error code to see what error bits are set. + */ + dd_dev_err(dd, "%s firmware security time out\n", who); + ret = -ETIMEDOUT; + break; + } + + msleep(20); + } + + /* + * Arrive here on success or failure. Clear all RSA engine + * errors. All current errors will stick - the RSA logic is keeping + * error high. All previous errors will clear - the RSA logic + * is not keeping the error high. + */ + write_csr(dd, MISC_ERR_CLEAR, + MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK + | MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK); + /* + * All that is left are the current errors. Print failure details, + * if any. + */ + reg = read_csr(dd, MISC_ERR_STATUS); + if (ret) { + if (reg & MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK) + dd_dev_err(dd, "%s firmware authorization failed\n", + who); + if (reg & MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK) + dd_dev_err(dd, "%s firmware key mismatch\n", who); + } + + return ret; +} + +static void load_security_variables(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + /* Security variables a. Write the modulus */ + write_rsa_data(dd, MISC_CFG_RSA_MODULUS, fdet->modulus, KEY_SIZE); + /* Security variables b. Write the r2 */ + write_rsa_data(dd, MISC_CFG_RSA_R2, fdet->r2, KEY_SIZE); + /* Security variables c. Write the mu */ + write_rsa_data(dd, MISC_CFG_RSA_MU, fdet->mu, MU_SIZE); + /* Security variables d. Write the header */ + write_streamed_rsa_data(dd, MISC_CFG_SHA_PRELOAD, + (u8 *)fdet->css_header, sizeof(struct css_header)); +} + +/* return the 8051 firmware state */ +static inline u32 get_firmware_state(struct hfi1_devdata *dd) +{ + u64 reg = read_csr(dd, DC_DC8051_STS_CUR_STATE); + + return (reg >> DC_DC8051_STS_CUR_STATE_FIRMWARE_SHIFT) + & DC_DC8051_STS_CUR_STATE_FIRMWARE_MASK; +} + +/* + * Wait until the firmware is up and ready to take host requests. + * Return 0 on success, -ETIMEDOUT on timeout. + */ +int wait_fm_ready(struct hfi1_devdata *dd, u32 mstimeout) +{ + unsigned long timeout; + + /* in the simulator, the fake 8051 is always ready */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) + return 0; + + timeout = msecs_to_jiffies(mstimeout) + jiffies; + while (1) { + if (get_firmware_state(dd) == 0xa0) /* ready */ + return 0; + if (time_after(jiffies, timeout)) /* timed out */ + return -ETIMEDOUT; + usleep_range(1950, 2050); /* sleep 2ms-ish */ + } +} + +/* + * Load the 8051 firmware. + */ +static int load_8051_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + u64 reg; + int ret; + u8 ver_a, ver_b; + + /* + * DC Reset sequence + * Load DC 8051 firmware + */ + /* + * DC reset step 1: Reset DC8051 + */ + reg = DC_DC8051_CFG_RST_M8051W_SMASK + | DC_DC8051_CFG_RST_CRAM_SMASK + | DC_DC8051_CFG_RST_DRAM_SMASK + | DC_DC8051_CFG_RST_IRAM_SMASK + | DC_DC8051_CFG_RST_SFR_SMASK; + write_csr(dd, DC_DC8051_CFG_RST, reg); + + /* + * DC reset step 2 (optional): Load 8051 data memory with link + * configuration + */ + + /* + * DC reset step 3: Load DC8051 firmware + */ + /* release all but the core reset */ + reg = DC_DC8051_CFG_RST_M8051W_SMASK; + write_csr(dd, DC_DC8051_CFG_RST, reg); + + /* Firmware load step 1 */ + load_security_variables(dd, fdet); + + /* + * Firmware load step 2. Clear MISC_CFG_FW_CTRL.FW_8051_LOADED + */ + write_csr(dd, MISC_CFG_FW_CTRL, 0); + + /* Firmware load steps 3-5 */ + ret = write_8051(dd, 1/*code*/, 0, fdet->firmware_ptr, + fdet->firmware_len); + if (ret) + return ret; + + /* + * DC reset step 4. Host starts the DC8051 firmware + */ + /* + * Firmware load step 6. Set MISC_CFG_FW_CTRL.FW_8051_LOADED + */ + write_csr(dd, MISC_CFG_FW_CTRL, MISC_CFG_FW_CTRL_FW_8051_LOADED_SMASK); + + /* Firmware load steps 7-10 */ + ret = run_rsa(dd, "8051", fdet->signature); + if (ret) + return ret; + + /* clear all reset bits, releasing the 8051 */ + write_csr(dd, DC_DC8051_CFG_RST, 0ull); + + /* + * DC reset step 5. Wait for firmware to be ready to accept host + * requests. + */ + ret = wait_fm_ready(dd, TIMEOUT_8051_START); + if (ret) { /* timed out */ + dd_dev_err(dd, "8051 start timeout, current state 0x%x\n", + get_firmware_state(dd)); + return -ETIMEDOUT; + } + + read_misc_status(dd, &ver_a, &ver_b); + dd_dev_info(dd, "8051 firmware version %d.%d\n", + (int)ver_b, (int)ver_a); + + return 0; +} + +/* SBus Master broadcast address */ +#define SBUS_MASTER_BROADCAST 0xfd + +/* + * Write the SBus request register + * + * No need for masking - the arguments are sized exactly. + */ +void sbus_request(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in) +{ + write_csr(dd, ASIC_CFG_SBUS_REQUEST, + ((u64)data_in << ASIC_CFG_SBUS_REQUEST_DATA_IN_SHIFT) + | ((u64)command << ASIC_CFG_SBUS_REQUEST_COMMAND_SHIFT) + | ((u64)data_addr << ASIC_CFG_SBUS_REQUEST_DATA_ADDR_SHIFT) + | ((u64)receiver_addr + << ASIC_CFG_SBUS_REQUEST_RECEIVER_ADDR_SHIFT)); +} + +/* + * Turn off the SBus and fabric serdes spicos. + * + * + Must be called with Sbus fast mode turned on. + * + Must be called after fabric serdes broadcast is set up. + * + Must be called before the 8051 is loaded - assumes 8051 is not loaded + * when using MISC_CFG_FW_CTRL. + */ +static void turn_off_spicos(struct hfi1_devdata *dd, int flags) +{ + /* only needed on A0 */ + if (!is_a0(dd)) + return; + + dd_dev_info(dd, "Turning off spicos:%s%s\n", + flags & SPICO_SBUS ? " SBus" : "", + flags & SPICO_FABRIC ? " fabric" : ""); + + write_csr(dd, MISC_CFG_FW_CTRL, ENABLE_SPICO_SMASK); + /* disable SBus spico */ + if (flags & SPICO_SBUS) + sbus_request(dd, SBUS_MASTER_BROADCAST, 0x01, + WRITE_SBUS_RECEIVER, 0x00000040); + + /* disable the fabric serdes spicos */ + if (flags & SPICO_FABRIC) + sbus_request(dd, fabric_serdes_broadcast[dd->hfi1_id], + 0x07, WRITE_SBUS_RECEIVER, 0x00000000); + write_csr(dd, MISC_CFG_FW_CTRL, 0); +} + +/* + * Reset all of the fabric serdes for our HFI. + */ +void fabric_serdes_reset(struct hfi1_devdata *dd) +{ + u8 ra; + + if (dd->icode != ICODE_RTL_SILICON) /* only for RTL */ + return; + + ra = fabric_serdes_broadcast[dd->hfi1_id]; + + acquire_hw_mutex(dd); + set_sbus_fast_mode(dd); + /* place SerDes in reset and disable SPICO */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011); + /* wait 100 refclk cycles @ 156.25MHz => 640ns */ + udelay(1); + /* remove SerDes reset */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010); + /* turn SPICO enable on */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002); + clear_sbus_fast_mode(dd); + release_hw_mutex(dd); +} + +/* Access to the SBus in this routine should probably be serialized */ +int sbus_request_slow(struct hfi1_devdata *dd, + u8 receiver_addr, u8 data_addr, u8 command, u32 data_in) +{ + u64 reg, count = 0; + + sbus_request(dd, receiver_addr, data_addr, command, data_in); + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, + ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK); + /* Wait for both DONE and RCV_DATA_VALID to go high */ + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + while (!((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) && + (reg & ASIC_STS_SBUS_RESULT_RCV_DATA_VALID_SMASK))) { + if (count++ >= SBUS_MAX_POLL_COUNT) { + u64 counts = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + /* + * If the loop has timed out, we are OK if DONE bit + * is set and RCV_DATA_VALID and EXECUTE counters + * are the same. If not, we cannot proceed. + */ + if ((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) && + (SBUS_COUNTER(counts, RCV_DATA_VALID) == + SBUS_COUNTER(counts, EXECUTE))) + break; + return -ETIMEDOUT; + } + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + } + count = 0; + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0); + /* Wait for DONE to clear after EXECUTE is cleared */ + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + while (reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) { + if (count++ >= SBUS_MAX_POLL_COUNT) + return -ETIME; + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_RESULT); + } + return 0; +} + +static int load_fabric_serdes_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i, err; + const u8 ra = fabric_serdes_broadcast[dd->hfi1_id]; /* receiver addr */ + + dd_dev_info(dd, "Downloading fabric firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: place SerDes in reset and disable SPICO */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011); + /* wait 100 refclk cycles @ 156.25MHz => 640ns */ + udelay(1); + /* step 3: remove SerDes reset */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010); + /* step 4: assert IMEM override */ + sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x40000000); + /* step 5: download SerDes machine code */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x0a, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 6: IMEM override off */ + sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x00000000); + /* step 7: turn ECC on */ + sbus_request(dd, ra, 0x0b, WRITE_SBUS_RECEIVER, 0x000c0000); + + /* steps 8-11: run the RSA engine */ + err = run_rsa(dd, "fabric serdes", fdet->signature); + if (err) + return err; + + /* step 12: turn SPICO enable on */ + sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002); + /* step 13: enable core hardware interrupts */ + sbus_request(dd, ra, 0x08, WRITE_SBUS_RECEIVER, 0x00000000); + + return 0; +} + +static int load_sbus_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i, err; + const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */ + + dd_dev_info(dd, "Downloading SBus firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: place SPICO into reset and enable off */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x000000c0); + /* step 3: remove reset, enable off, IMEM_CNTRL_EN on */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000240); + /* step 4: set starting IMEM address for burst download */ + sbus_request(dd, ra, 0x03, WRITE_SBUS_RECEIVER, 0x80000000); + /* step 5: download the SBus Master machine code */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x14, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 6: set IMEM_CNTL_EN off */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000040); + /* step 7: turn ECC on */ + sbus_request(dd, ra, 0x16, WRITE_SBUS_RECEIVER, 0x000c0000); + + /* steps 8-11: run the RSA engine */ + err = run_rsa(dd, "SBus", fdet->signature); + if (err) + return err; + + /* step 12: set SPICO_ENABLE on */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140); + + return 0; +} + +static int load_pcie_serdes_firmware(struct hfi1_devdata *dd, + struct firmware_details *fdet) +{ + int i; + const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */ + + dd_dev_info(dd, "Downloading PCIe firmware\n"); + + /* step 1: load security variables */ + load_security_variables(dd, fdet); + /* step 2: assert single step (halts the SBus Master spico) */ + sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000001); + /* step 3: enable XDMEM access */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000d40); + /* step 4: load firmware into SBus Master XDMEM */ + /* NOTE: the dmem address, write_en, and wdata are all pre-packed, + we only need to pick up the bytes and write them */ + for (i = 0; i < fdet->firmware_len; i += 4) { + sbus_request(dd, ra, 0x04, WRITE_SBUS_RECEIVER, + *(u32 *)&fdet->firmware_ptr[i]); + } + /* step 5: disable XDMEM access */ + sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140); + /* step 6: allow SBus Spico to run */ + sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000000); + + /* steps 7-11: run RSA, if it succeeds, firmware is available to + be swapped */ + return run_rsa(dd, "PCIe serdes", fdet->signature); +} + +/* + * Set the given broadcast values on the given list of devices. + */ +static void set_serdes_broadcast(struct hfi1_devdata *dd, u8 bg1, u8 bg2, + const u8 *addrs, int count) +{ + while (--count >= 0) { + /* + * Set BROADCAST_GROUP_1 and BROADCAST_GROUP_2, leave + * defaults for everything else. Do not read-modify-write, + * per instruction from the manufacturer. + * + * Register 0xfd: + * bits what + * ----- --------------------------------- + * 0 IGNORE_BROADCAST (default 0) + * 11:4 BROADCAST_GROUP_1 (default 0xff) + * 23:16 BROADCAST_GROUP_2 (default 0xff) + */ + sbus_request(dd, addrs[count], 0xfd, WRITE_SBUS_RECEIVER, + (u32)bg1 << 4 | (u32)bg2 << 16); + } +} + +int acquire_hw_mutex(struct hfi1_devdata *dd) +{ + unsigned long timeout; + int try = 0; + u8 mask = 1 << dd->hfi1_id; + u8 user; + +retry: + timeout = msecs_to_jiffies(HM_TIMEOUT) + jiffies; + while (1) { + write_csr(dd, ASIC_CFG_MUTEX, mask); + user = (u8)read_csr(dd, ASIC_CFG_MUTEX); + if (user == mask) + return 0; /* success */ + if (time_after(jiffies, timeout)) + break; /* timed out */ + msleep(20); + } + + /* timed out */ + dd_dev_err(dd, + "Unable to acquire hardware mutex, mutex mask %u, my mask %u (%s)\n", + (u32)user, (u32)mask, (try == 0) ? "retrying" : "giving up"); + + if (try == 0) { + /* break mutex and retry */ + write_csr(dd, ASIC_CFG_MUTEX, 0); + try++; + goto retry; + } + + return -EBUSY; +} + +void release_hw_mutex(struct hfi1_devdata *dd) +{ + write_csr(dd, ASIC_CFG_MUTEX, 0); +} + +void set_sbus_fast_mode(struct hfi1_devdata *dd) +{ + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, + ASIC_CFG_SBUS_EXECUTE_FAST_MODE_SMASK); +} + +void clear_sbus_fast_mode(struct hfi1_devdata *dd) +{ + u64 reg, count = 0; + + reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + while (SBUS_COUNTER(reg, EXECUTE) != + SBUS_COUNTER(reg, RCV_DATA_VALID)) { + if (count++ >= SBUS_MAX_POLL_COUNT) + break; + udelay(1); + reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS); + } + write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0); +} + +int load_firmware(struct hfi1_devdata *dd) +{ + int ret; + + if (fw_sbus_load || fw_fabric_serdes_load) { + ret = acquire_hw_mutex(dd); + if (ret) + return ret; + + set_sbus_fast_mode(dd); + + /* + * The SBus contains part of the fabric firmware and so must + * also be downloaded. + */ + if (fw_sbus_load) { + turn_off_spicos(dd, SPICO_SBUS); + ret = load_sbus_firmware(dd, &fw_sbus); + if (ret) + goto clear; + } + + if (fw_fabric_serdes_load) { + set_serdes_broadcast(dd, all_fabric_serdes_broadcast, + fabric_serdes_broadcast[dd->hfi1_id], + fabric_serdes_addrs[dd->hfi1_id], + NUM_FABRIC_SERDES); + turn_off_spicos(dd, SPICO_FABRIC); + ret = load_fabric_serdes_firmware(dd, &fw_fabric); + } + +clear: + clear_sbus_fast_mode(dd); + release_hw_mutex(dd); + if (ret) + return ret; + } + + if (fw_8051_load) { + ret = load_8051_firmware(dd, &fw_8051); + if (ret) + return ret; + } + + return 0; +} + +int hfi1_firmware_init(struct hfi1_devdata *dd) +{ + /* we do not expect more than 2 HFIs */ + BUG_ON(dd->hfi1_id >= 2); + + /* only RTL can use these */ + if (dd->icode != ICODE_RTL_SILICON) { + fw_fabric_serdes_load = 0; + fw_pcie_serdes_load = 0; + fw_sbus_load = 0; + } + + /* no 8051 or QSFP on simulator */ + if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + fw_8051_load = 0; + platform_config_load = 0; + } + + if (!fw_8051_name) { + if (dd->icode == ICODE_RTL_SILICON) + fw_8051_name = DEFAULT_FW_8051_NAME_ASIC; + else + fw_8051_name = DEFAULT_FW_8051_NAME_FPGA; + } + if (!fw_fabric_serdes_name) + fw_fabric_serdes_name = DEFAULT_FW_FABRIC_NAME; + if (!fw_sbus_name) + fw_sbus_name = DEFAULT_FW_SBUS_NAME; + if (!fw_pcie_serdes_name) + fw_pcie_serdes_name = DEFAULT_FW_PCIE_NAME; + if (!platform_config_name) + platform_config_name = DEFAULT_PLATFORM_CONFIG_NAME; + + return obtain_firmware(dd); +} + +int parse_platform_config(struct hfi1_devdata *dd) +{ + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + u32 *ptr = NULL; + u32 header1 = 0, header2 = 0, magic_num = 0, crc = 0; + u32 record_idx = 0, table_type = 0, table_length_dwords = 0; + + if (platform_config == NULL) { + dd_dev_info(dd, "%s: Missing config file\n", __func__); + goto bail; + } + ptr = (u32 *)platform_config->data; + + magic_num = *ptr; + ptr++; + if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) { + dd_dev_info(dd, "%s: Bad config file\n", __func__); + goto bail; + } + + while (ptr < (u32 *)(platform_config->data + platform_config->size)) { + header1 = *ptr; + header2 = *(ptr + 1); + if (header1 != ~header2) { + dd_dev_info(dd, "%s: Failed validation at offset %ld\n", + __func__, (ptr - (u32 *)platform_config->data)); + goto bail; + } + + record_idx = *ptr & + ((1 << PLATFORM_CONFIG_HEADER_RECORD_IDX_LEN_BITS) - 1); + + table_length_dwords = (*ptr >> + PLATFORM_CONFIG_HEADER_TABLE_LENGTH_SHIFT) & + ((1 << PLATFORM_CONFIG_HEADER_TABLE_LENGTH_LEN_BITS) - 1); + + table_type = (*ptr >> PLATFORM_CONFIG_HEADER_TABLE_TYPE_SHIFT) & + ((1 << PLATFORM_CONFIG_HEADER_TABLE_TYPE_LEN_BITS) - 1); + + /* Done with this set of headers */ + ptr += 2; + + if (record_idx) { + /* data table */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + pcfgcache->config_tables[table_type].num_table = + 1; + break; + case PLATFORM_CONFIG_PORT_TABLE: + pcfgcache->config_tables[table_type].num_table = + 2; + break; + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + pcfgcache->config_tables[table_type].num_table = + table_length_dwords; + break; + default: + dd_dev_info(dd, + "%s: Unknown data table %d, offset %ld\n", + __func__, table_type, + (ptr - (u32 *)platform_config->data)); + goto bail; /* We don't trust this file now */ + } + pcfgcache->config_tables[table_type].table = ptr; + } else { + /* metadata table */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + /* fall through */ + case PLATFORM_CONFIG_PORT_TABLE: + /* fall through */ + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + break; + default: + dd_dev_info(dd, + "%s: Unknown metadata table %d, offset %ld\n", + __func__, table_type, + (ptr - (u32 *)platform_config->data)); + goto bail; /* We don't trust this file now */ + } + pcfgcache->config_tables[table_type].table_metadata = + ptr; + } + + /* Calculate and check table crc */ + crc = crc32_le(~(u32)0, (unsigned char const *)ptr, + (table_length_dwords * 4)); + crc ^= ~(u32)0; + + /* Jump the table */ + ptr += table_length_dwords; + if (crc != *ptr) { + dd_dev_info(dd, "%s: Failed CRC check at offset %ld\n", + __func__, (ptr - (u32 *)platform_config->data)); + goto bail; + } + /* Jump the CRC DWORD */ + ptr++; + } + + pcfgcache->cache_valid = 1; + return 0; +bail: + memset(pcfgcache, 0, sizeof(struct platform_config_cache)); + return -EINVAL; +} + +static int get_platform_fw_field_metadata(struct hfi1_devdata *dd, int table, + int field, u32 *field_len_bits, u32 *field_start_bits) +{ + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + u32 *src_ptr = NULL; + + if (!pcfgcache->cache_valid) + return -EINVAL; + + switch (table) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + /* fall through */ + case PLATFORM_CONFIG_PORT_TABLE: + /* fall through */ + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + if (field && field < platform_config_table_limits[table]) + src_ptr = + pcfgcache->config_tables[table].table_metadata + field; + break; + default: + dd_dev_info(dd, "%s: Unknown table\n", __func__); + break; + } + + if (!src_ptr) + return -EINVAL; + + if (field_start_bits) + *field_start_bits = *src_ptr & + ((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1); + + if (field_len_bits) + *field_len_bits = (*src_ptr >> METADATA_TABLE_FIELD_LEN_SHIFT) + & ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1); + + return 0; +} + +/* This is the central interface to getting data out of the platform config + * file. It depends on parse_platform_config() having populated the + * platform_config_cache in hfi1_devdata, and checks the cache_valid member to + * validate the sanity of the cache. + * + * The non-obvious parameters: + * @table_index: Acts as a look up key into which instance of the tables the + * relevant field is fetched from. + * + * This applies to the data tables that have multiple instances. The port table + * is an exception to this rule as each HFI only has one port and thus the + * relevant table can be distinguished by hfi_id. + * + * @data: pointer to memory that will be populated with the field requested. + * @len: length of memory pointed by @data in bytes. + */ +int get_platform_config_field(struct hfi1_devdata *dd, + enum platform_config_table_type_encoding table_type, + int table_index, int field_index, u32 *data, u32 len) +{ + int ret = 0, wlen = 0, seek = 0; + u32 field_len_bits = 0, field_start_bits = 0, *src_ptr = NULL; + struct platform_config_cache *pcfgcache = &dd->pcfg_cache; + + if (data) + memset(data, 0, len); + else + return -EINVAL; + + ret = get_platform_fw_field_metadata(dd, table_type, field_index, + &field_len_bits, &field_start_bits); + if (ret) + return -EINVAL; + + /* Convert length to bits */ + len *= 8; + + /* Our metadata function checked cache_valid and field_index for us */ + switch (table_type) { + case PLATFORM_CONFIG_SYSTEM_TABLE: + src_ptr = pcfgcache->config_tables[table_type].table; + + if (field_index != SYSTEM_TABLE_QSFP_POWER_CLASS_MAX) { + if (len < field_len_bits) + return -EINVAL; + + seek = field_start_bits/8; + wlen = field_len_bits/8; + + src_ptr = (u32 *)((u8 *)src_ptr + seek); + + /* We expect the field to be byte aligned and whole byte + * lengths if we are here */ + memcpy(data, src_ptr, wlen); + return 0; + } + break; + case PLATFORM_CONFIG_PORT_TABLE: + /* Port table is 4 DWORDS in META_VERSION 0 */ + src_ptr = dd->hfi1_id ? + pcfgcache->config_tables[table_type].table + 4 : + pcfgcache->config_tables[table_type].table; + break; + case PLATFORM_CONFIG_RX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_TX_PRESET_TABLE: + /* fall through */ + case PLATFORM_CONFIG_QSFP_ATTEN_TABLE: + /* fall through */ + case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE: + src_ptr = pcfgcache->config_tables[table_type].table; + + if (table_index < + pcfgcache->config_tables[table_type].num_table) + src_ptr += table_index; + else + src_ptr = NULL; + break; + default: + dd_dev_info(dd, "%s: Unknown table\n", __func__); + break; + } + + if (!src_ptr || len < field_len_bits) + return -EINVAL; + + src_ptr += (field_start_bits/32); + *data = (*src_ptr >> (field_start_bits % 32)) & + ((1 << field_len_bits) - 1); + + return 0; +} + +/* + * Download the firmware needed for the Gen3 PCIe SerDes. An update + * to the SBus firmware is needed before updating the PCIe firmware. + * + * Note: caller must be holding the HW mutex. + */ +int load_pcie_firmware(struct hfi1_devdata *dd) +{ + int ret = 0; + + /* both firmware loads below use the SBus */ + set_sbus_fast_mode(dd); + + if (fw_sbus_load) { + turn_off_spicos(dd, SPICO_SBUS); + ret = load_sbus_firmware(dd, &fw_sbus); + if (ret) + goto done; + } + + if (fw_pcie_serdes_load) { + dd_dev_info(dd, "Setting PCIe SerDes broadcast\n"); + set_serdes_broadcast(dd, all_pcie_serdes_broadcast, + pcie_serdes_broadcast[dd->hfi1_id], + pcie_serdes_addrs[dd->hfi1_id], + NUM_PCIE_SERDES); + ret = load_pcie_serdes_firmware(dd, &fw_pcie); + if (ret) + goto done; + } + +done: + clear_sbus_fast_mode(dd); + + return ret; +} + +/* + * Read the GUID from the hardware, store it in dd. + */ +void read_guid(struct hfi1_devdata *dd) +{ + dd->base_guid = cpu_to_be64(read_csr(dd, DC_DC8051_CFG_LOCAL_GUID)); + dd_dev_info(dd, "GUID %llx", + (unsigned long long)be64_to_cpu(dd->base_guid)); +} -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html