On Thu, Jun 18, 2015 at 10:09:59AM +0200, Alexander Sverdlin wrote: > Hello Felipe, > > On 17/06/15 21:31, ext Felipe Balbi wrote: > > With this patch we try to be as close to 50% > > duty cycle as possible. The reason for this > > is that some devices present an erratic behavior > > with certain duty cycles. > > > > One such example is TPS65218 PMIC which fails > > to change voltages when running @ 400kHz and > > duty cycle is lower than 34%. > > > > The idea of the patch is simple: > > > > calculate desired scl_period from requested scl > > and use 50% for tLow and 50% for tHigh. > > > > tLow is calculated with a DIV_ROUND_UP() to make > > sure it's slightly higher than tHigh and to make > > sure that we end up within I2C specifications. > > if you refuse to change the calculations to achieve maximum possible > bus rate (as I've shown you with SCLL=9 and SCLH=9), maybe you want to > change the description? Because you are doing something else than is > written here. You are only in spec because you are not doing 50% duty > cycle. And you didn't mention here that you lower the bus speed below > 400kHz to achieve this. and there's a comment where the calculation goes which states "as close to 50% as possible but we make sure tLow is higher than tHigh so we're still within spec". -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: