From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Tue, 4 Aug 2015 01:45:10 +0200
Subject: [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver
	model Raspberry Pi
In-Reply-To: <1436324032-17931-1-git-send-email-sjg@chromium.org>
References: <1436324032-17931-1-git-send-email-sjg@chromium.org>
Message-ID: <201508040145.11098.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday, July 08, 2015 at 04:53:32 AM, Simon Glass wrote:
> Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
> Neither of these currently support driver model.
> 
> This series does the following:
> - Move Raspberry Pi to use device tree control (u-boot-dtb.bin instead of
>      u-boot.bin)
> - Remove GPIO platform data (now uses device tree)
> - Remove serial platform data (now uses device tree)
> - Add 'ranges' support to simple-bus
> - Convert the DWC2 USB driver to support driver model
> - Convert the SMSC95XX USB Ethernet driver to support driver model
> - Enable CONFIG_DM_ETH and CONFIG_DM_USB on Raspberry Pi
> 
> With Ethernet active the device list looks something like this:
> 
> U-Boot> dm tree
>  Class       Probed   Name
> ----------------------------------------
>  root        [ + ]    root_driver
>  simple_bus  [ + ]    |-- soc
>  gpio        [   ]    |   |-- gpio at 7e200000
>  serial      [ + ]    |   |-- uart at 7e201000
>  usb         [ + ]    |   `-- usb at 7e980000
>  usb_hub     [ + ]    |       `-- usb_hub
>  usb_hub     [ + ]    |           `-- usb_hub
>  eth         [ + ]    |               `-- smsc95xx_eth
>  simple_bus  [   ]    `-- clocks
> 
> Raspberry Pi 2 is not converted as I do not have one to test at present.
> 
> 
> 
> Simon Glass (20):
>   dm: net: Support usbethaddr environment variable
>   dm: usb: Allow USB Ethernet whenever CONFIG_DM_ETH is not defined
>   dm: usb: Add an errno.h header to usb_ether.c
>   dm: usb: Prepare dwc2 driver for driver-model conversion
>   dm: usb: Add driver-model support to dwc2
>   net: smsc95xx: Sort the include files
>   net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZE
>   net: smsc95xx: Correct the error numbers
>   net: smsc95xx: Prepare for conversion to driver model
>   net: smsc95xx: Add driver-model support
>   dm: serial: Update binding for PL01x serial UART
>   dm: Support address translation for simple-bus
>   arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info
>   arm: rpi: Bring in kernel device tree files
>   arm: rpi: Device tree modifications for U-Boot
>   arm: rpi: Enable device tree control for Rasberry Pi
>   arm: rpi: Drop the UART console platform data
>   arm: rpi: Drop the GPIO platform data
>   arm: rpi: Move to driver model for USB
>   arm: rpi: Use driver model for Ethernet

I could really use the DM part of this patchset on SoCFPGA, can you maybe
drop the rpi part and repost it, so that part can be mainlined please ?