From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: buildroot@busybox.net
Subject: [Buildroot] [RFC 3/6] system: add mdev-only /dev management (without devtmpfs)
Date: Mon, 14 Sep 2015 21:34:04 +0200 [thread overview]
Message-ID: <20150914213404.4fdd36a5@free-electrons.com> (raw)
In-Reply-To: <55F6F060.2060901@lucaceresoli.net>
Dear Luca Ceresoli,
On Mon, 14 Sep 2015 18:05:52 +0200, Luca Ceresoli wrote:
> But now I removed that patch, and replaced with a different
> implementation based on Arnout's suggestion of using BUSYBOX_DEVICES.
I am not sure using BUSYBOX_DEVICES is fully correct. The reason
why /dev/console is needed is *not* because of Busybox, but because of
the kernel that is opening /dev/console before handing control over
to the init application:
http://lxr.free-electrons.com/source/init/main.c#L1011
If you do BUSYBOX_DEVICES with just /dev/console, then you will also
need a SYSVINIT_DEVICES with just /dev/console.
Though I admit my comment here is mainly nitpicking :)
> > One thing I dislike a bit is that there is quite a bit overlap between
> > S10mdev and activate-mdev. As Arnout suggested, can you just mount a
> > tmpfs in /dev in the inittab in the "mdev without devtmpfs" case, and
> > then keep the normal S10mdev script?
>
> v2 will do things this way.
Great!
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2015-09-14 19:34 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-08 21:28 [Buildroot] [RFC 0/6] mdev-only /dev management (without devtmpfs) Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 1/6] Move mounting /sys from fstab to inittab Luca Ceresoli
2015-09-09 9:12 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 2/6] system: clarify /dev management using devtmpfs + {mdev, eudev} Luca Ceresoli
2015-09-09 9:40 ` Arnout Vandecappelle
2015-09-09 10:53 ` Luca Ceresoli
2015-09-09 10:54 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 3/6] system: add mdev-only /dev management (without devtmpfs) Luca Ceresoli
2015-09-09 9:21 ` Arnout Vandecappelle
2015-09-09 12:29 ` Luca Ceresoli
2015-09-09 12:32 ` Arnout Vandecappelle
2015-09-09 13:54 ` Thomas Petazzoni
2015-09-14 13:47 ` Luca Ceresoli
2015-09-14 22:23 ` Arnout Vandecappelle
2015-09-15 22:35 ` Luca Ceresoli
2015-09-14 20:53 ` Peter Korsgaard
2015-09-14 21:34 ` Thomas Petazzoni
2015-09-14 21:38 ` Peter Korsgaard
2015-09-15 7:30 ` Thomas Petazzoni
2015-09-15 8:09 ` Peter Korsgaard
2015-09-15 9:41 ` Thomas Petazzoni
2015-09-15 12:01 ` Peter Korsgaard
2015-09-15 12:27 ` Arnout Vandecappelle
2015-09-15 12:32 ` Peter Korsgaard
2015-09-18 16:37 ` Luca Ceresoli
2015-09-15 13:03 ` Thomas Petazzoni
2015-09-15 13:14 ` Peter Korsgaard
2015-09-15 22:34 ` Luca Ceresoli
2015-10-01 9:36 ` Luca Ceresoli
2015-10-01 10:03 ` Peter Korsgaard
2015-09-15 22:31 ` Luca Ceresoli
2015-09-16 7:32 ` Peter Korsgaard
2015-09-18 15:47 ` Luca Ceresoli
2015-09-09 9:34 ` Arnout Vandecappelle
2015-09-09 11:23 ` Thomas Petazzoni
2015-09-09 11:29 ` Thomas Petazzoni
2015-09-09 20:33 ` Arnout Vandecappelle
2015-09-14 16:07 ` Luca Ceresoli
2015-09-14 16:05 ` Luca Ceresoli
2015-09-14 19:34 ` Thomas Petazzoni [this message]
2015-09-14 20:19 ` Arnout Vandecappelle
2015-09-15 22:07 ` Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 4/6] system: strip the initial /dev for mdev-only /dev management Luca Ceresoli
2015-09-08 21:28 ` [Buildroot] [RFC 5/6] docs/manual: document "Dynamic using mdev only" " Luca Ceresoli
2015-09-09 10:39 ` Arnout Vandecappelle
2015-09-08 21:28 ` [Buildroot] [RFC 6/6] **** DO NOT COMMIT THIS **** ugly stuff to test mdev-only " Luca Ceresoli
2015-09-09 9:26 ` [Buildroot] [RFC 0/6] mdev-only /dev management (without devtmpfs) Arnout Vandecappelle
2015-09-09 11:30 ` Thomas Petazzoni
2015-09-14 21:03 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150914213404.4fdd36a5@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.