* [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
@ 2018-09-06 14:13 ` Henrik Laxhuber
0 siblings, 0 replies; 6+ messages in thread
From: Henrik Laxhuber @ 2018-09-06 14:13 UTC (permalink / raw
To: seth.forshee; +Cc: linux-wireless, wireless-regdb
Update to reflect the current data published in the 'National Frequency
Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
at the time of writing points to the documents [1] and [2].
[0] https://www.ofcomnet.ch/#/fatTable
[1] https://www.ofcomnet.ch/api/rir/1010/05
[2] https://www.ofcomnet.ch/api/rir/1010/04
Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
---
db.txt | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 8cf7dee..69cea85 100644
--- a/db.txt
+++ b/db.txt
@@ -265,10 +265,14 @@ country CF: DFS-FCC
(5490 - 5730 @ 40), (24), DFS
(5735 - 5835 @ 40), (30)
+# Source:
+# https://www.ofcomnet.ch/#/fatTable
+# Note that the maximum transmitter power can be doubled for
5250-5710MHz if
+# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country CH: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
- (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
+ (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -743,11 +747,18 @@ country LC: DFS-ETSI
(5490 - 5710 @ 160), (30), DFS
(5735 - 5815 @ 80), (30)
+
+# Source:
+# https://www.ofcomnet.ch/#/fatTable
+# Note that the maximum transmitter power can be doubled for
5250-5710MHz if
+# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country LI: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
- (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
+ (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
+ # 60 GHz band channels 1-4, ref: Etsi En 302 567
+ (57000 - 66000 @ 2160), (40)
country LK: DFS-FCC
(2402 - 2482 @ 40), (20)
--
2.18.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [wireless-regdb] [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
@ 2018-09-06 14:13 ` Henrik Laxhuber
0 siblings, 0 replies; 6+ messages in thread
From: Henrik Laxhuber @ 2018-09-06 14:13 UTC (permalink / raw
To: seth.forshee; +Cc: wireless-regdb, linux-wireless
Update to reflect the current data published in the 'National Frequency
Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
at the time of writing points to the documents [1] and [2].
[0] https://www.ofcomnet.ch/#/fatTable
[1] https://www.ofcomnet.ch/api/rir/1010/05
[2] https://www.ofcomnet.ch/api/rir/1010/04
Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
---
db.txt | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 8cf7dee..69cea85 100644
--- a/db.txt
+++ b/db.txt
@@ -265,10 +265,14 @@ country CF: DFS-FCC
(5490 - 5730 @ 40), (24), DFS
(5735 - 5835 @ 40), (30)
+# Source:
+# https://www.ofcomnet.ch/#/fatTable
+# Note that the maximum transmitter power can be doubled for
5250-5710MHz if
+# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country CH: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
- (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
+ (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -743,11 +747,18 @@ country LC: DFS-ETSI
(5490 - 5710 @ 160), (30), DFS
(5735 - 5815 @ 80), (30)
+
+# Source:
+# https://www.ofcomnet.ch/#/fatTable
+# Note that the maximum transmitter power can be doubled for
5250-5710MHz if
+# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country LI: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
- (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
+ (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
+ # 60 GHz band channels 1-4, ref: Etsi En 302 567
+ (57000 - 66000 @ 2160), (40)
country LK: DFS-FCC
(2402 - 2482 @ 40), (20)
--
2.18.0
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
2018-09-06 14:13 ` [wireless-regdb] " Henrik Laxhuber
@ 2018-09-07 12:32 ` Seth Forshee
-1 siblings, 0 replies; 6+ messages in thread
From: Seth Forshee @ 2018-09-07 12:32 UTC (permalink / raw
To: Henrik Laxhuber; +Cc: linux-wireless, wireless-regdb
On Thu, Sep 06, 2018 at 04:13:22PM +0200, Henrik Laxhuber wrote:
> Update to reflect the current data published in the 'National Frequency
> Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
> at the time of writing points to the documents [1] and [2].
>
> [0] https://www.ofcomnet.ch/#/fatTable
> [1] https://www.ofcomnet.ch/api/rir/1010/05
> [2] https://www.ofcomnet.ch/api/rir/1010/04
>
> Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
> ---
> db.txt | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/db.txt b/db.txt
> index 8cf7dee..69cea85 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -265,10 +265,14 @@ country CF: DFS-FCC
> (5490 - 5730 @ 40), (24), DFS
> (5735 - 5835 @ 40), (30)
>
> +# Source:
> +# https://www.ofcomnet.ch/#/fatTable
> +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> if
> +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> country CH: DFS-ETSI
> (2402 - 2482 @ 40), (20)
> - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
Maybe you missed this in my last reply, I had suggested this range can
be 5150-5250 as in the document you linked to. If you agree with this
change I can make it when I apply the patch.
Thanks,
Seth
> + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
> (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
> # 60 GHz band channels 1-4, ref: Etsi En 302 567
> (57000 - 66000 @ 2160), (40)
> @@ -743,11 +747,18 @@ country LC: DFS-ETSI
> (5490 - 5710 @ 160), (30), DFS
> (5735 - 5815 @ 80), (30)
>
> +
> +# Source:
> +# https://www.ofcomnet.ch/#/fatTable
> +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> if
> +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> country LI: DFS-ETSI
> (2402 - 2482 @ 40), (20)
> - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
> + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
> (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
> + # 60 GHz band channels 1-4, ref: Etsi En 302 567
> + (57000 - 66000 @ 2160), (40)
>
> country LK: DFS-FCC
> (2402 - 2482 @ 40), (20)
> --
> 2.18.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [wireless-regdb] [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
@ 2018-09-07 12:32 ` Seth Forshee
0 siblings, 0 replies; 6+ messages in thread
From: Seth Forshee @ 2018-09-07 12:32 UTC (permalink / raw
To: Henrik Laxhuber; +Cc: wireless-regdb, linux-wireless
On Thu, Sep 06, 2018 at 04:13:22PM +0200, Henrik Laxhuber wrote:
> Update to reflect the current data published in the 'National Frequency
> Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
> at the time of writing points to the documents [1] and [2].
>
> [0] https://www.ofcomnet.ch/#/fatTable
> [1] https://www.ofcomnet.ch/api/rir/1010/05
> [2] https://www.ofcomnet.ch/api/rir/1010/04
>
> Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
> ---
> db.txt | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/db.txt b/db.txt
> index 8cf7dee..69cea85 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -265,10 +265,14 @@ country CF: DFS-FCC
> (5490 - 5730 @ 40), (24), DFS
> (5735 - 5835 @ 40), (30)
>
> +# Source:
> +# https://www.ofcomnet.ch/#/fatTable
> +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> if
> +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> country CH: DFS-ETSI
> (2402 - 2482 @ 40), (20)
> - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
Maybe you missed this in my last reply, I had suggested this range can
be 5150-5250 as in the document you linked to. If you agree with this
change I can make it when I apply the patch.
Thanks,
Seth
> + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
> (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
> # 60 GHz band channels 1-4, ref: Etsi En 302 567
> (57000 - 66000 @ 2160), (40)
> @@ -743,11 +747,18 @@ country LC: DFS-ETSI
> (5490 - 5710 @ 160), (30), DFS
> (5735 - 5815 @ 80), (30)
>
> +
> +# Source:
> +# https://www.ofcomnet.ch/#/fatTable
> +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> if
> +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> country LI: DFS-ETSI
> (2402 - 2482 @ 40), (20)
> - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
> + (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
> (5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
> + # 60 GHz band channels 1-4, ref: Etsi En 302 567
> + (57000 - 66000 @ 2160), (40)
>
> country LK: DFS-FCC
> (2402 - 2482 @ 40), (20)
> --
> 2.18.0
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
2018-09-07 12:32 ` [wireless-regdb] " Seth Forshee
@ 2018-09-07 18:22 ` Seth Forshee
-1 siblings, 0 replies; 6+ messages in thread
From: Seth Forshee @ 2018-09-07 18:22 UTC (permalink / raw
To: Henrik Laxhuber; +Cc: linux-wireless, wireless-regdb
On Fri, Sep 07, 2018 at 07:32:56AM -0500, Seth Forshee wrote:
> On Thu, Sep 06, 2018 at 04:13:22PM +0200, Henrik Laxhuber wrote:
> > Update to reflect the current data published in the 'National Frequency
> > Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
> > at the time of writing points to the documents [1] and [2].
> >
> > [0] https://www.ofcomnet.ch/#/fatTable
> > [1] https://www.ofcomnet.ch/api/rir/1010/05
> > [2] https://www.ofcomnet.ch/api/rir/1010/04
> >
> > Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
> > ---
> > db.txt | 19 +++++++++++++++----
> > 1 file changed, 15 insertions(+), 4 deletions(-)
> >
> > diff --git a/db.txt b/db.txt
> > index 8cf7dee..69cea85 100644
> > --- a/db.txt
> > +++ b/db.txt
> > @@ -265,10 +265,14 @@ country CF: DFS-FCC
> > (5490 - 5730 @ 40), (24), DFS
> > (5735 - 5835 @ 40), (30)
> >
> > +# Source:
> > +# https://www.ofcomnet.ch/#/fatTable
> > +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> > if
> > +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> > country CH: DFS-ETSI
> > (2402 - 2482 @ 40), (20)
> > - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> > - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
>
> Maybe you missed this in my last reply, I had suggested this range can
> be 5150-5250 as in the document you linked to. If you agree with this
> change I can make it when I apply the patch.
Applied with this change here and in the rules for Liechtenstein.
Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [wireless-regdb] [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz
@ 2018-09-07 18:22 ` Seth Forshee
0 siblings, 0 replies; 6+ messages in thread
From: Seth Forshee @ 2018-09-07 18:22 UTC (permalink / raw
To: Henrik Laxhuber; +Cc: wireless-regdb, linux-wireless
On Fri, Sep 07, 2018 at 07:32:56AM -0500, Seth Forshee wrote:
> On Thu, Sep 06, 2018 at 04:13:22PM +0200, Henrik Laxhuber wrote:
> > Update to reflect the current data published in the 'National Frequency
> > Allocation Strategy Table' [0] for Switzerland and Liechtenstein, which
> > at the time of writing points to the documents [1] and [2].
> >
> > [0] https://www.ofcomnet.ch/#/fatTable
> > [1] https://www.ofcomnet.ch/api/rir/1010/05
> > [2] https://www.ofcomnet.ch/api/rir/1010/04
> >
> > Signed-off-by: Henrik Laxhuber <henrik@laxhuber.com>
> > ---
> > db.txt | 19 +++++++++++++++----
> > 1 file changed, 15 insertions(+), 4 deletions(-)
> >
> > diff --git a/db.txt b/db.txt
> > index 8cf7dee..69cea85 100644
> > --- a/db.txt
> > +++ b/db.txt
> > @@ -265,10 +265,14 @@ country CF: DFS-FCC
> > (5490 - 5730 @ 40), (24), DFS
> > (5735 - 5835 @ 40), (30)
> >
> > +# Source:
> > +# https://www.ofcomnet.ch/#/fatTable
> > +# Note that the maximum transmitter power can be doubled for 5250-5710MHz
> > if
> > +# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
> > country CH: DFS-ETSI
> > (2402 - 2482 @ 40), (20)
> > - (5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
> > - (5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
> > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
>
> Maybe you missed this in my last reply, I had suggested this range can
> be 5150-5250 as in the document you linked to. If you agree with this
> change I can make it when I apply the patch.
Applied with this change here and in the rules for Liechtenstein.
Thanks!
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-09-07 23:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-06 14:13 [PATCH] wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz Henrik Laxhuber
2018-09-06 14:13 ` [wireless-regdb] " Henrik Laxhuber
2018-09-07 12:32 ` Seth Forshee
2018-09-07 12:32 ` [wireless-regdb] " Seth Forshee
2018-09-07 18:22 ` Seth Forshee
2018-09-07 18:22 ` [wireless-regdb] " Seth Forshee
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.