* [GIT PULL 1/4] Broadcom devicetree changes for 4.21
@ 2018-12-01 20:39 Florian Fainelli
2018-12-01 20:39 ` [GIT PULL 2/4] Broadcom drivers " Florian Fainelli
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Florian Fainelli @ 2018-12-01 20:39 UTC (permalink / raw
To: arm
Cc: Stefan Wahren, Rob Herring, Florian Fainelli, arnd, khilman, olof,
Phil Elwell, René Kjellerup, Eric Anholt,
bcm-kernel-feedback-list, linux-arm-kernel,
Rafał Miłecki, Vivek Unune
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/devicetree
for you to fetch changes up to 9994241ac97cb84d1df98fdc172d3cc6b04b11bf:
ARM: dts: BCM5301X: Describe Northstar pins mux controller (2018-11-30 10:35:02 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
----------------------------------------------------------------
Florian Fainelli (4):
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
Merge tag 'tags/bcm2835-dt-next-2018-11-27' into devicetree/next
Phil Elwell (3):
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: bcm283x: Correct vchiq compatible string
ARM: dts: bcm283x: Correct mailbox register sizes
Rafał Miłecki (5):
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Describe Northstar pins mux controller
René Kjellerup (1):
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
Stefan Wahren (1):
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
.../bindings/soc/bcm/brcm,bcm2835-vchiq.txt | 3 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm-nsp.dtsi | 8 ++++
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 8 +---
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 8 +---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 +-
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +-
arch/arm/boot/dts/bcm2836-rpi.dtsi | 6 +++
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +-
arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 2 +-
arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 ++++++++++++++++++++++
arch/arm/boot/dts/bcm47081.dtsi | 13 +------
arch/arm/boot/dts/bcm4709.dtsi | 3 +-
arch/arm/boot/dts/bcm47094.dtsi | 3 +-
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 3 +-
arch/arm/boot/dts/bcm5301x.dtsi | 44 +++++++++++++++++++++
arch/arm/boot/dts/bcm53573.dtsi | 3 +-
arch/arm/boot/dts/bcm63138.dtsi | 31 +++++++++++++++
arch/arm/boot/dts/bcm958522er.dts | 4 --
arch/arm/boot/dts/bcm958525er.dts | 4 --
arch/arm/boot/dts/bcm958525xmc.dts | 4 --
arch/arm/boot/dts/bcm958622hr.dts | 4 --
arch/arm/boot/dts/bcm958623hr.dts | 4 --
arch/arm/boot/dts/bcm958625hr.dts | 4 --
arch/arm/boot/dts/bcm958625k.dts | 5 ---
arch/arm/boot/dts/bcm963138dvt.dts | 8 ++++
arch/arm/boot/dts/bcm988312hr.dts | 4 --
28 files changed, 158 insertions(+), 74 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2836-rpi.dtsi
create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [GIT PULL 2/4] Broadcom drivers changes for 4.21
2018-12-01 20:39 [GIT PULL 1/4] Broadcom devicetree changes for 4.21 Florian Fainelli
@ 2018-12-01 20:39 ` Florian Fainelli
2018-12-03 21:07 ` Olof Johansson
2018-12-01 20:39 ` [GIT PULL 3/4] Broadcom maintainers " Florian Fainelli
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Florian Fainelli @ 2018-12-01 20:39 UTC (permalink / raw
To: arm
Cc: Stefan Wahren, James Hughes, Florian Fainelli, arnd, Eric Anholt,
Yangtao Li, khilman, Wolfram Sang, bcm-kernel-feedback-list, olof,
linux-arm-kernel
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/drivers
for you to fetch changes up to 1861a7f07e02292830a1ca256328d370deefea30:
soc: bcm: brcmstb: Don't leak device tree node reference (2018-11-28 13:46:44 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:
- James fixes the firmware interface after a commit changed the use of
VLA and broke large transfers
- Stefan adds a timeout check for Raspberry Pi firmware transactions and
updates a bunch of SoC/firmware files to use SPDX tags
- Wolfram switches the GISB bus arbiter to use dev_get_drvdata()
- Yangtao provides a fix for a reference leak due to a call to
of_find_node_by_path()
- Florian fixes the CPU re-entry point out of S3 suspend with kernels
built in Thumb2 mode
----------------------------------------------------------------
Florian Fainelli (2):
soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL
Merge tag 'tags/bcm2835-drivers-next-2018-11-27' into drivers/next
James Hughes (1):
firmware: raspberrypi: Fix firmware calls with large buffers
Stefan Wahren (3):
firmware: raspberrypi: Define timeout for transactions
soc: bcm: Switch raspberrypi-power to SPDX identifier
firmware: raspberrypi: Switch to SPDX identifier
Wolfram Sang (1):
bus: brcmstb_gisb: simplify getting .driver_data
Yangtao Li (1):
soc: bcm: brcmstb: Don't leak device tree node reference
drivers/bus/brcmstb_gisb.c | 12 +++----
drivers/firmware/raspberrypi.c | 48 ++++++++++++++-------------
drivers/soc/bcm/brcmstb/common.c | 6 +++-
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 2 +-
drivers/soc/bcm/raspberrypi-power.c | 5 +--
include/dt-bindings/power/raspberrypi-power.h | 5 +--
include/soc/bcm2835/raspberrypi-firmware.h | 5 +--
7 files changed, 38 insertions(+), 45 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [GIT PULL 3/4] Broadcom maintainers changes for 4.21
2018-12-01 20:39 [GIT PULL 1/4] Broadcom devicetree changes for 4.21 Florian Fainelli
2018-12-01 20:39 ` [GIT PULL 2/4] Broadcom drivers " Florian Fainelli
@ 2018-12-01 20:39 ` Florian Fainelli
2018-12-03 21:08 ` Olof Johansson
2018-12-01 20:39 ` [GIT PULL 4/4] Broadcom soc " Florian Fainelli
2018-12-03 20:54 ` [GIT PULL 1/4] Broadcom devicetree " Olof Johansson
3 siblings, 1 reply; 9+ messages in thread
From: Florian Fainelli @ 2018-12-01 20:39 UTC (permalink / raw
To: arm
Cc: Florian Fainelli, arnd, khilman, Jon Mason,
bcm-kernel-feedback-list, olof, linux-arm-kernel
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/maintainers
for you to fetch changes up to 7900f06c3feedbe74d79f28a0d062dbf11fd10bf:
MAINTAINERS: Remove self from Broadcom SoCs (2018-11-05 10:41:44 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs MAINTAINERS file
updates for 4.21, please pull the following:
- Jon Mason has moved to a different company, remove him from the
Northstar Plus entry
----------------------------------------------------------------
Jon Mason (1):
MAINTAINERS: Remove self from Broadcom SoCs
MAINTAINERS | 2 --
1 file changed, 2 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* [GIT PULL 4/4] Broadcom soc changes for 4.21
2018-12-01 20:39 [GIT PULL 1/4] Broadcom devicetree changes for 4.21 Florian Fainelli
2018-12-01 20:39 ` [GIT PULL 2/4] Broadcom drivers " Florian Fainelli
2018-12-01 20:39 ` [GIT PULL 3/4] Broadcom maintainers " Florian Fainelli
@ 2018-12-01 20:39 ` Florian Fainelli
2018-12-03 21:09 ` Olof Johansson
2018-12-03 20:54 ` [GIT PULL 1/4] Broadcom devicetree " Olof Johansson
3 siblings, 1 reply; 9+ messages in thread
From: Florian Fainelli @ 2018-12-01 20:39 UTC (permalink / raw
To: arm
Cc: Stefan Wahren, Florian Fainelli, arnd, khilman, Eric Anholt,
bcm-kernel-feedback-list, Justin Chen, olof, linux-arm-kernel
The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/soc
for you to fetch changes up to 12e0888de8d3bab92d219379d4226c7f9c306a91:
Merge tag 'tags/bcm2835-soc-next-2018-11-27' into soc/next (2018-11-27 13:24:50 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs machine files updates
for 4.21, please pull the following:
- Stefan switches relevant BCM283x files under arch/arm/mach-bcm to the
SPDX license identifiers
- Justin adds an entry in the Broadcom STB debug LL stub for 7255
- Florian enables reset controller support for BCM63xx SoCs
----------------------------------------------------------------
Florian Fainelli (2):
ARM: BCM63XX: Enable reset controller support
Merge tag 'tags/bcm2835-soc-next-2018-11-27' into soc/next
Justin Chen (1):
ARM: brcmstb: Add entry for 7255
Stefan Wahren (1):
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
arch/arm/include/debug/brcmstb.S | 24 +++++++++++++-----------
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm/mach-bcm/board_bcm2835.c | 11 +----------
arch/arm/mach-bcm/platsmp.c | 10 +---------
arch/arm/mach-bcm/platsmp.h | 6 +-----
5 files changed, 17 insertions(+), 35 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 1/4] Broadcom devicetree changes for 4.21
2018-12-01 20:39 [GIT PULL 1/4] Broadcom devicetree changes for 4.21 Florian Fainelli
` (2 preceding siblings ...)
2018-12-01 20:39 ` [GIT PULL 4/4] Broadcom soc " Florian Fainelli
@ 2018-12-03 20:54 ` Olof Johansson
3 siblings, 0 replies; 9+ messages in thread
From: Olof Johansson @ 2018-12-03 20:54 UTC (permalink / raw
To: Florian Fainelli
Cc: Stefan Wahren, Rob Herring, arnd, khilman, Phil Elwell,
René Kjellerup, Eric Anholt, arm, bcm-kernel-feedback-list,
linux-arm-kernel, Rafał Miłecki, Vivek Unune
On Sat, Dec 01, 2018 at 12:39:39PM -0800, Florian Fainelli wrote:
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/devicetree
>
> for you to fetch changes up to 9994241ac97cb84d1df98fdc172d3cc6b04b11bf:
>
> ARM: dts: BCM5301X: Describe Northstar pins mux controller (2018-11-30 10:35:02 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM-based SoCs Device Tree changes
> for 4.21, please pull the following:
>
> - Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
> license and adds proper SPDX license tags in the process
>
> - Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
> BCM4708 plus two BCM4360 and BCM4331 radios
>
> - Phil documents and updates the vchiq mailbox compatible string in
> order to establish a correct agreement between the Raspberry Pi
> firmware and the ARM CPU's view of what an ARM CPU cache line size is,
> he also fixes the mailbox "reg" property to be correctly expressed in
> bytes
>
> - Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
>
> - Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
> he also does a bit of refactoring of aliases for the Northstar Plus
> DTS files
Thanks, merged into next/dt!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 2/4] Broadcom drivers changes for 4.21
2018-12-01 20:39 ` [GIT PULL 2/4] Broadcom drivers " Florian Fainelli
@ 2018-12-03 21:07 ` Olof Johansson
2018-12-03 21:58 ` Eric Anholt
0 siblings, 1 reply; 9+ messages in thread
From: Olof Johansson @ 2018-12-03 21:07 UTC (permalink / raw
To: Florian Fainelli
Cc: Stefan Wahren, James Hughes, arnd, Eric Anholt, Yangtao Li,
khilman, Wolfram Sang, arm, bcm-kernel-feedback-list,
linux-arm-kernel
On Sat, Dec 01, 2018 at 12:39:40PM -0800, Florian Fainelli wrote:
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/drivers
>
> for you to fetch changes up to 1861a7f07e02292830a1ca256328d370deefea30:
>
> soc: bcm: brcmstb: Don't leak device tree node reference (2018-11-28 13:46:44 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
> for 4.21, please pull the following changes:
>
> - James fixes the firmware interface after a commit changed the use of
> VLA and broke large transfers
>
> - Stefan adds a timeout check for Raspberry Pi firmware transactions and
> updates a bunch of SoC/firmware files to use SPDX tags
Should the timeout and large transfers be merged as fixes?
Picked it up in next/drivers now, we can cherry-pick the fixes if needed.
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 3/4] Broadcom maintainers changes for 4.21
2018-12-01 20:39 ` [GIT PULL 3/4] Broadcom maintainers " Florian Fainelli
@ 2018-12-03 21:08 ` Olof Johansson
0 siblings, 0 replies; 9+ messages in thread
From: Olof Johansson @ 2018-12-03 21:08 UTC (permalink / raw
To: Florian Fainelli
Cc: arnd, khilman, Jon Mason, arm, bcm-kernel-feedback-list,
linux-arm-kernel
On Sat, Dec 01, 2018 at 12:39:41PM -0800, Florian Fainelli wrote:
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/maintainers
>
> for you to fetch changes up to 7900f06c3feedbe74d79f28a0d062dbf11fd10bf:
>
> MAINTAINERS: Remove self from Broadcom SoCs (2018-11-05 10:41:44 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM-based SoCs MAINTAINERS file
> updates for 4.21, please pull the following:
>
> - Jon Mason has moved to a different company, remove him from the
> Northstar Plus entry
I applied this directly in fixes and sent it in for 4.20-rc5, so this patch is
no longer needed. Didn't pull this branch since it was the only thing on it.
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 4/4] Broadcom soc changes for 4.21
2018-12-01 20:39 ` [GIT PULL 4/4] Broadcom soc " Florian Fainelli
@ 2018-12-03 21:09 ` Olof Johansson
0 siblings, 0 replies; 9+ messages in thread
From: Olof Johansson @ 2018-12-03 21:09 UTC (permalink / raw
To: Florian Fainelli
Cc: Stefan Wahren, arnd, khilman, Eric Anholt, arm,
bcm-kernel-feedback-list, Justin Chen, linux-arm-kernel
On Sat, Dec 01, 2018 at 12:39:42PM -0800, Florian Fainelli wrote:
> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>
> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/soc
>
> for you to fetch changes up to 12e0888de8d3bab92d219379d4226c7f9c306a91:
>
> Merge tag 'tags/bcm2835-soc-next-2018-11-27' into soc/next (2018-11-27 13:24:50 -0800)
>
> ----------------------------------------------------------------
> This pull request contains Broadcom ARM-based SoCs machine files updates
> for 4.21, please pull the following:
>
> - Stefan switches relevant BCM283x files under arch/arm/mach-bcm to the
> SPDX license identifiers
>
> - Justin adds an entry in the Broadcom STB debug LL stub for 7255
>
> - Florian enables reset controller support for BCM63xx SoCs
Merged, thanks!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PULL 2/4] Broadcom drivers changes for 4.21
2018-12-03 21:07 ` Olof Johansson
@ 2018-12-03 21:58 ` Eric Anholt
0 siblings, 0 replies; 9+ messages in thread
From: Eric Anholt @ 2018-12-03 21:58 UTC (permalink / raw
To: Olof Johansson, Florian Fainelli
Cc: Stefan Wahren, James Hughes, arnd, khilman, Yangtao Li,
Wolfram Sang, arm, bcm-kernel-feedback-list, linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 1323 bytes --]
Olof Johansson <olof@lixom.net> writes:
> On Sat, Dec 01, 2018 at 12:39:40PM -0800, Florian Fainelli wrote:
>> The following changes since commit 651022382c7f8da46cb4872a545ee1da6d097d2a:
>>
>> Linux 4.20-rc1 (2018-11-04 15:37:52 -0800)
>>
>> are available in the Git repository at:
>>
>> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.21/drivers
>>
>> for you to fetch changes up to 1861a7f07e02292830a1ca256328d370deefea30:
>>
>> soc: bcm: brcmstb: Don't leak device tree node reference (2018-11-28 13:46:44 -0800)
>>
>> ----------------------------------------------------------------
>> This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
>> for 4.21, please pull the following changes:
>>
>> - James fixes the firmware interface after a commit changed the use of
>> VLA and broke large transfers
>>
>> - Stefan adds a timeout check for Raspberry Pi firmware transactions and
>> updates a bunch of SoC/firmware files to use SPDX tags
>
> Should the timeout and large transfers be merged as fixes?
>
> Picked it up in next/drivers now, we can cherry-pick the fixes if needed.
Large transfers only currently affect the Raspberry Pi fork, and we
shouldn't ever see a timeout in normal operation, so I don't think we
need them for fixes.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-12-03 21:58 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-01 20:39 [GIT PULL 1/4] Broadcom devicetree changes for 4.21 Florian Fainelli
2018-12-01 20:39 ` [GIT PULL 2/4] Broadcom drivers " Florian Fainelli
2018-12-03 21:07 ` Olof Johansson
2018-12-03 21:58 ` Eric Anholt
2018-12-01 20:39 ` [GIT PULL 3/4] Broadcom maintainers " Florian Fainelli
2018-12-03 21:08 ` Olof Johansson
2018-12-01 20:39 ` [GIT PULL 4/4] Broadcom soc " Florian Fainelli
2018-12-03 21:09 ` Olof Johansson
2018-12-03 20:54 ` [GIT PULL 1/4] Broadcom devicetree " Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.