From: Haiyue Wang <haiyue.wang@intel.com>
To: dev@dpdk.org, ferruh.yigit@intel.com, mdr@ashroe.eu,
chenmin.sun@intel.com
Cc: Haiyue Wang <haiyue.wang@intel.com>
Subject: [dpdk-dev] [RFC v3 3/4] net/ice: support to get the Rx/Tx burst mode
Date: Wed, 11 Sep 2019 00:33:36 +0800 [thread overview]
Message-ID: <20190910163337.4843-4-haiyue.wang@intel.com> (raw)
In-Reply-To: <20190910163337.4843-1-haiyue.wang@intel.com>
According to the selected Rx/Tx burst function name, retrieve the
related burst mode options.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
---
drivers/net/ice/ice_ethdev.c | 2 ++
drivers/net/ice/ice_rxtx.c | 54 ++++++++++++++++++++++++++++++++++++
drivers/net/ice/ice_rxtx.h | 4 +++
3 files changed, 60 insertions(+)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 63997fdfb..784e07744 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -147,6 +147,8 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
.vlan_pvid_set = ice_vlan_pvid_set,
.rxq_info_get = ice_rxq_info_get,
.txq_info_get = ice_txq_info_get,
+ .rx_burst_mode_get = ice_rx_burst_mode_get,
+ .tx_burst_mode_get = ice_tx_burst_mode_get,
.get_eeprom_length = ice_get_eeprom_length,
.get_eeprom = ice_get_eeprom,
.rx_queue_count = ice_rx_queue_count,
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index 81af81441..9e4c08d0a 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -2396,6 +2396,37 @@ ice_set_rx_function(struct rte_eth_dev *dev)
}
}
+void
+ice_rx_burst_mode_get(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
+ uint64_t options;
+
+ if (pkt_burst == ice_recv_scattered_pkts)
+ options = RTE_ETH_BURST_SCALAR | RTE_ETH_BURST_SCATTERED;
+ else if (pkt_burst == ice_recv_pkts_bulk_alloc)
+ options = RTE_ETH_BURST_SCALAR | RTE_ETH_BURST_BULK_ALLOC;
+ else if (pkt_burst == ice_recv_pkts)
+ options = RTE_ETH_BURST_SCALAR;
+#ifdef RTE_ARCH_X86
+ else if (pkt_burst == ice_recv_scattered_pkts_vec_avx2)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_AVX2 |
+ RTE_ETH_BURST_SCATTERED;
+ else if (pkt_burst == ice_recv_pkts_vec_avx2)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_AVX2;
+ else if (pkt_burst == ice_recv_scattered_pkts_vec)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_SSE |
+ RTE_ETH_BURST_SCATTERED;
+ else if (pkt_burst == ice_recv_pkts_vec)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_SSE;
+#endif
+ else
+ options = 0;
+
+ mode->options = options;
+}
+
void __attribute__((cold))
ice_set_tx_function_flag(struct rte_eth_dev *dev, struct ice_tx_queue *txq)
{
@@ -2519,6 +2550,29 @@ ice_set_tx_function(struct rte_eth_dev *dev)
}
}
+void
+ice_tx_burst_mode_get(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id,
+ struct rte_eth_burst_mode *mode)
+{
+ eth_tx_burst_t pkt_burst = dev->tx_pkt_burst;
+ uint64_t options;
+
+ if (pkt_burst == ice_xmit_pkts_simple)
+ options = RTE_ETH_BURST_SCALAR | RTE_ETH_BURST_SIMPLE;
+ else if (pkt_burst == ice_xmit_pkts)
+ options = RTE_ETH_BURST_SCALAR;
+#ifdef RTE_ARCH_X86
+ else if (pkt_burst == ice_xmit_pkts_vec_avx2)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_AVX2;
+ else if (pkt_burst == ice_xmit_pkts_vec)
+ options = RTE_ETH_BURST_VECTOR | RTE_ETH_BURST_SSE;
+#endif
+ else
+ options = 0;
+
+ mode->options = options;
+}
+
/* For each value it means, datasheet of hardware can tell more details
*
* @note: fix ice_dev_supported_ptypes_get() if any change here.
diff --git a/drivers/net/ice/ice_rxtx.h b/drivers/net/ice/ice_rxtx.h
index e9214110c..8bdd4369c 100644
--- a/drivers/net/ice/ice_rxtx.h
+++ b/drivers/net/ice/ice_rxtx.h
@@ -166,6 +166,10 @@ void ice_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_rxq_info *qinfo);
void ice_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
+void ice_rx_burst_mode_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_burst_mode *mode);
+void ice_tx_burst_mode_get(struct rte_eth_dev *dev, uint16_t queue_id,
+ struct rte_eth_burst_mode *mode);
int ice_rx_descriptor_status(void *rx_queue, uint16_t offset);
int ice_tx_descriptor_status(void *tx_queue, uint16_t offset);
void ice_set_default_ptype_table(struct rte_eth_dev *dev);
--
2.17.1
next prev parent reply other threads:[~2019-09-10 16:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 16:33 [dpdk-dev] [RFC v3 0/4] get Rx/Tx packet burst mode information Haiyue Wang
2019-09-10 16:33 ` [dpdk-dev] [RFC v3 1/4] ethdev: add the API for getting " Haiyue Wang
2019-09-10 16:33 ` [dpdk-dev] [RFC v3 2/4] net/i40e: support to get the Rx/Tx burst mode Haiyue Wang
2019-09-10 16:33 ` Haiyue Wang [this message]
2019-09-10 16:33 ` [dpdk-dev] [RFC v3 4/4] app/testpmd: show the Rx/Tx burst mode description Haiyue Wang
2019-09-12 16:07 ` Iremonger, Bernard
2019-09-25 16:33 ` Wang, Haiyue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190910163337.4843-4-haiyue.wang@intel.com \
--to=haiyue.wang@intel.com \
--cc=chenmin.sun@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=mdr@ashroe.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.