From: Vitaly Wool <vitalywool@gmail.com>
To: Linux-MM <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>,
Dan Streetman <ddstreet@ieee.org>,
Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
LKML <linux-kernel@vger.kernel.org>,
Vlastimil Babka <vbabka@suse.cz>,
Shakeel Butt <shakeelb@google.com>,
Henry Burns <henrywolfeburns@gmail.com>,
Theodore Ts'o <tytso@thunk.org>
Subject: [PATCH 3/3] zram: use common zpool interface
Date: Thu, 10 Oct 2019 23:20:30 +0300 [thread overview]
Message-ID: <20191010232030.af6444879413e76a780cd27e@gmail.com> (raw)
In-Reply-To: <20191010230414.647c29f34665ca26103879c4@gmail.com>
Change ZRAM into using zpool API. This patch allows to use any
zpool compatible allocation backend with ZRAM. It is meant to make
no functional changes to ZRAM.
zpool-registered backend can be selected via the module parameter
or kernel boot string. 'zsmalloc' is taken by default.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
---
drivers/block/zram/Kconfig | 3 ++-
drivers/block/zram/zram_drv.c | 64 +++++++++++++++++++----------------
drivers/block/zram/zram_drv.h | 4 +--
3 files changed, 39 insertions(+), 32 deletions(-)
diff --git a/drivers/block/zram/Kconfig b/drivers/block/zram/Kconfig
index fe7a4b7d30cf..7248d5aa3468 100644
--- a/drivers/block/zram/Kconfig
+++ b/drivers/block/zram/Kconfig
@@ -1,8 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
config ZRAM
tristate "Compressed RAM block device support"
- depends on BLOCK && SYSFS && ZSMALLOC && CRYPTO
+ depends on BLOCK && SYSFS && CRYPTO
select CRYPTO_LZO
+ select ZPOOL
help
Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
Pages written to these disks are compressed and stored in memory
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index d58a359a6622..881f10f99a5d 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -43,6 +43,9 @@ static DEFINE_MUTEX(zram_index_mutex);
static int zram_major;
static const char *default_compressor = "lzo-rle";
+#define BACKEND_PAR_BUF_SIZE 32
+static char backend_par_buf[BACKEND_PAR_BUF_SIZE];
+
/* Module params (documentation at end) */
static unsigned int num_devices = 1;
/*
@@ -277,7 +280,7 @@ static ssize_t mem_used_max_store(struct device *dev,
down_read(&zram->init_lock);
if (init_done(zram)) {
atomic_long_set(&zram->stats.max_used_pages,
- zs_get_total_pages(zram->mem_pool));
+ zpool_get_total_size(zram->mem_pool) >> PAGE_SHIFT);
}
up_read(&zram->init_lock);
@@ -1020,7 +1023,7 @@ static ssize_t compact_store(struct device *dev,
return -EINVAL;
}
- zs_compact(zram->mem_pool);
+ zpool_compact(zram->mem_pool);
up_read(&zram->init_lock);
return len;
@@ -1048,17 +1051,14 @@ static ssize_t mm_stat_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct zram *zram = dev_to_zram(dev);
- struct zs_pool_stats pool_stats;
u64 orig_size, mem_used = 0;
- long max_used;
+ long max_used, num_compacted = 0;
ssize_t ret;
- memset(&pool_stats, 0x00, sizeof(struct zs_pool_stats));
-
down_read(&zram->init_lock);
if (init_done(zram)) {
- mem_used = zs_get_total_pages(zram->mem_pool);
- zs_pool_stats(zram->mem_pool, &pool_stats);
+ mem_used = zpool_get_total_size(zram->mem_pool);
+ num_compacted = zpool_get_num_compacted(zram->mem_pool);
}
orig_size = atomic64_read(&zram->stats.pages_stored);
@@ -1068,11 +1068,11 @@ static ssize_t mm_stat_show(struct device *dev,
"%8llu %8llu %8llu %8lu %8ld %8llu %8lu %8llu\n",
orig_size << PAGE_SHIFT,
(u64)atomic64_read(&zram->stats.compr_data_size),
- mem_used << PAGE_SHIFT,
+ mem_used,
zram->limit_pages << PAGE_SHIFT,
max_used << PAGE_SHIFT,
(u64)atomic64_read(&zram->stats.same_pages),
- pool_stats.pages_compacted,
+ num_compacted,
(u64)atomic64_read(&zram->stats.huge_pages));
up_read(&zram->init_lock);
@@ -1133,27 +1133,30 @@ static void zram_meta_free(struct zram *zram, u64 disksize)
for (index = 0; index < num_pages; index++)
zram_free_page(zram, index);
- zs_destroy_pool(zram->mem_pool);
+ zpool_destroy_pool(zram->mem_pool);
vfree(zram->table);
}
static bool zram_meta_alloc(struct zram *zram, u64 disksize)
{
size_t num_pages;
+ char *backend;
num_pages = disksize >> PAGE_SHIFT;
zram->table = vzalloc(array_size(num_pages, sizeof(*zram->table)));
if (!zram->table)
return false;
- zram->mem_pool = zs_create_pool(zram->disk->disk_name);
+ backend = strlen(backend_par_buf) ? backend_par_buf : "zsmalloc";
+ zram->mem_pool = zpool_create_pool(backend, zram->disk->disk_name,
+ GFP_NOIO, NULL);
if (!zram->mem_pool) {
vfree(zram->table);
return false;
}
if (!huge_class_size)
- huge_class_size = zs_huge_class_size(zram->mem_pool);
+ huge_class_size = zpool_huge_class_size(zram->mem_pool);
return true;
}
@@ -1197,7 +1200,7 @@ static void zram_free_page(struct zram *zram, size_t index)
if (!handle)
return;
- zs_free(zram->mem_pool, handle);
+ zpool_free(zram->mem_pool, handle);
atomic64_sub(zram_get_obj_size(zram, index),
&zram->stats.compr_data_size);
@@ -1246,7 +1249,7 @@ static int __zram_bvec_read(struct zram *zram, struct page *page, u32 index,
size = zram_get_obj_size(zram, index);
- src = zs_map_object(zram->mem_pool, handle, ZS_MM_RO);
+ src = zpool_map_handle(zram->mem_pool, handle, ZPOOL_MM_RO);
if (size == PAGE_SIZE) {
dst = kmap_atomic(page);
memcpy(dst, src, PAGE_SIZE);
@@ -1260,7 +1263,7 @@ static int __zram_bvec_read(struct zram *zram, struct page *page, u32 index,
kunmap_atomic(dst);
zcomp_stream_put(zram->comp);
}
- zs_unmap_object(zram->mem_pool, handle);
+ zpool_unmap_handle(zram->mem_pool, handle);
zram_slot_unlock(zram, index);
/* Should NEVER happen. Return bio error if it does. */
@@ -1335,7 +1338,7 @@ static int __zram_bvec_write(struct zram *zram, struct bio_vec *bvec,
if (unlikely(ret)) {
zcomp_stream_put(zram->comp);
pr_err("Compression failed! err=%d\n", ret);
- zs_free(zram->mem_pool, handle);
+ zpool_free(zram->mem_pool, handle);
return ret;
}
@@ -1354,33 +1357,34 @@ static int __zram_bvec_write(struct zram *zram, struct bio_vec *bvec,
* if we have a 'non-null' handle here then we are coming
* from the slow path and handle has already been allocated.
*/
- if (!handle)
- handle = zs_malloc(zram->mem_pool, comp_len,
+ if (handle == 0)
+ ret = zpool_malloc(zram->mem_pool, comp_len,
__GFP_KSWAPD_RECLAIM |
__GFP_NOWARN |
__GFP_HIGHMEM |
- __GFP_MOVABLE);
- if (!handle) {
+ __GFP_MOVABLE,
+ &handle);
+ if (ret) {
zcomp_stream_put(zram->comp);
atomic64_inc(&zram->stats.writestall);
- handle = zs_malloc(zram->mem_pool, comp_len,
- GFP_NOIO | __GFP_HIGHMEM |
- __GFP_MOVABLE);
- if (handle)
+ ret = zpool_malloc(zram->mem_pool, comp_len,
+ GFP_NOIO | __GFP_HIGHMEM | __GFP_MOVABLE,
+ &handle);
+ if (ret == 0)
goto compress_again;
return -ENOMEM;
}
- alloced_pages = zs_get_total_pages(zram->mem_pool);
+ alloced_pages = zpool_get_total_size(zram->mem_pool) >> PAGE_SHIFT;
update_used_max(zram, alloced_pages);
if (zram->limit_pages && alloced_pages > zram->limit_pages) {
zcomp_stream_put(zram->comp);
- zs_free(zram->mem_pool, handle);
+ zpool_free(zram->mem_pool, handle);
return -ENOMEM;
}
- dst = zs_map_object(zram->mem_pool, handle, ZS_MM_WO);
+ dst = zpool_map_handle(zram->mem_pool, handle, ZPOOL_MM_WO);
src = zstrm->buffer;
if (comp_len == PAGE_SIZE)
@@ -1390,7 +1394,7 @@ static int __zram_bvec_write(struct zram *zram, struct bio_vec *bvec,
kunmap_atomic(src);
zcomp_stream_put(zram->comp);
- zs_unmap_object(zram->mem_pool, handle);
+ zpool_unmap_handle(zram->mem_pool, handle);
atomic64_add(comp_len, &zram->stats.compr_data_size);
out:
/*
@@ -2136,6 +2140,8 @@ module_exit(zram_exit);
module_param(num_devices, uint, 0);
MODULE_PARM_DESC(num_devices, "Number of pre-created zram devices");
+module_param_string(backend, backend_par_buf, BACKEND_PAR_BUF_SIZE, S_IRUGO);
+MODULE_PARM_DESC(backend, "Compression storage (backend) name");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Nitin Gupta <ngupta@vflare.org>");
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index f2fd46daa760..f4f51c6489ba 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -16,7 +16,7 @@
#define _ZRAM_DRV_H_
#include <linux/rwsem.h>
-#include <linux/zsmalloc.h>
+#include <linux/zpool.h>
#include <linux/crypto.h>
#include "zcomp.h"
@@ -91,7 +91,7 @@ struct zram_stats {
struct zram {
struct zram_table_entry *table;
- struct zs_pool *mem_pool;
+ struct zpool *mem_pool;
struct zcomp *comp;
struct gendisk *disk;
/* Prevent concurrent execution of device init */
--
2.20.1
next prev parent reply other threads:[~2019-10-10 20:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 20:04 [PATCH 0/3] Allow ZRAM to use any zpool-compatible backend Vitaly Wool
2019-10-10 20:09 ` [PATCH 1/3] zpool: extend API to match zsmalloc Vitaly Wool
2019-10-18 11:23 ` Dan Streetman
2019-10-10 20:11 ` [PATCH 2/3] zsmalloc: add compaction and huge class callbacks Vitaly Wool
2019-10-14 10:38 ` Sergey Senozhatsky
2019-10-10 20:20 ` Vitaly Wool [this message]
2019-10-14 10:47 ` [PATCH 3/3] zram: use common zpool interface Sergey Senozhatsky
2019-10-14 11:52 ` Vitaly Wool
2019-10-15 2:04 ` Sergey Senozhatsky
2019-10-14 10:33 ` [PATCH 0/3] Allow ZRAM to use any zpool-compatible backend Sergey Senozhatsky
2019-10-14 11:49 ` Vitaly Wool
2019-10-14 16:41 ` Minchan Kim
2019-10-14 16:50 ` Vitaly Wool
2019-10-15 7:39 ` Vitaly Wool
2019-10-15 20:00 ` Minchan Kim
2019-10-21 14:21 ` Vitaly Wool
2019-10-30 0:10 ` Minchan Kim
2019-11-13 15:54 ` Vitaly Wool
-- strict thread matches above, loose matches on Subject: below --
2015-09-14 13:49 [PATCH 0/3] allow zram to use zbud as underlying allocator Vitaly Wool
2015-09-14 13:55 ` [PATCH 3/3] zram: use common zpool interface Vitaly Wool
2015-09-14 13:55 ` Vitaly Wool
2015-09-15 1:12 ` Sergey Senozhatsky
2015-09-15 1:12 ` Sergey Senozhatsky
2015-09-15 6:03 ` Dan Streetman
2015-09-15 6:03 ` Dan Streetman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010232030.af6444879413e76a780cd27e@gmail.com \
--to=vitalywool@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=ddstreet@ieee.org \
--cc=henrywolfeburns@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan@kernel.org \
--cc=sergey.senozhatsky.work@gmail.com \
--cc=shakeelb@google.com \
--cc=tytso@thunk.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.