From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 13 Apr 2021 13:47:53 -0400 Subject: [PATCH 11/13] board: synquacer: Add DeveloperBox 96boards EE support In-Reply-To: <161832788118.562320.11063528179837203251.stgit@localhost> References: <161832714362.562320.8024090839631691588.stgit@localhost> <161832788118.562320.11063528179837203251.stgit@localhost> Message-ID: <20210413174753.GT1310@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Apr 14, 2021 at 12:31:21AM +0900, Masami Hiramatsu wrote: > Add the DeveloperBox 96boards EE support. This board is also > known as Socionext SynQuacer E-Series. It contians one "SC2A11" > SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, > 3 PCIe slots (1 4x port and 2 1x ports which are expanded via > PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA > ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard > MicroATX Form Factor. > > For more information, see this page; > https://www.96boards.org/product/developerbox/ > > Signed-off-by: Masami Hiramatsu [snip] > diff --git a/arch/arm/include/asm/arch-sc2a11/gpio.h b/arch/arm/include/asm/arch-sc2a11/gpio.h > new file mode 100644 > index 0000000000..6779803080 > --- /dev/null > +++ b/arch/arm/include/asm/arch-sc2a11/gpio.h > @@ -0,0 +1,9 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright 2021 (C) Linaro Ltd. > + */ > + > +#ifndef __ASM_ARCH_SC2A11_GPIO_H > +#define __ASM_ARCH_SC2A11_GPIO_H > + > +#endif Please update the list in arch/arm/include/asm/gpio.h to not look for asm/arch/gpio.h on this SoC, thanks. > diff --git a/board/socionext/developerbox/README b/board/socionext/developerbox/README > new file mode 100644 > index 0000000000..bb121002dd > --- /dev/null > +++ b/board/socionext/developerbox/README This needs to be in rST form and under doc/board/ now. [snip] > +/* > + * arguments for booti command > + */ > +#define LINUX_BASIC_BOOTARGS "basic_bootargs='" \ > + "console=ttyAMA0," __stringify(CONFIG_BAUDRATE) " " \ > + "rootwait verbose'\0" > + > +/* kernel:mmcblk0p1(ext2), rootfs:mmcblk0p1(ext2), devtree:mmcblk0p1(ext2) */ > +#define LINUX_MMCBOOTCOMMAND1 \ > + "mmcboot1=echo 'Boot from MMC (ext2 single rootfs)' ; " \ > + "mmc dev 0 &&" \ > + "ext2load mmc 0:1 ${kernel_addr} /boot/Image && " \ > + "ext2load mmc 0:1 ${fdt_addr_base} /boot/DeveloperBox.dtb && " \ > + "setenv fdt_addr ${fdt_addr_base} &&" \ > + "setenv fdt_size ${filesize} &&" \ > + "setenv bootargs ${mmc_bootargs1} && " \ > + "booti ${kernel_addr} - ${fdt_addr}\0" \ > + "mmc_bootargs1=" \ > + "root=/dev/mmcblk0p1 rw dtb=0x${fdt_addr},0x${fdt_size} " \ > + "${basic_bootargs} \0" You are strongly encouraged to use the generic distro boot features instead. This may require a little work to handle the device tree. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: