From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id DAF79C433ED for ; Fri, 23 Apr 2021 00:29:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B1821613F2 for ; Fri, 23 Apr 2021 00:29:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239919AbhDWA3q (ORCPT ); Thu, 22 Apr 2021 20:29:46 -0400 Received: from relay1-d.mail.gandi.net ([217.70.183.193]:20299 "EHLO relay1-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235302AbhDWA3o (ORCPT ); Thu, 22 Apr 2021 20:29:44 -0400 X-Originating-IP: 68.203.5.165 Received: from tacos.lan (cpe-68-203-5-165.austin.res.rr.com [68.203.5.165]) (Authenticated sender: frank@zago.net) by relay1-d.mail.gandi.net (Postfix) with ESMTPSA id 1C333240002; Fri, 23 Apr 2021 00:29:04 +0000 (UTC) From: Frank Zago To: Greg Kroah-Hartman , linux-kernel@vger.kernel.org, Jan-Niklas Burfeind , Bartosz Golaszewski , Wolfram Sang , Johan Hovold , linux-usb@vger.kernel.org, gunar@schorcht.net Cc: frank zago Subject: [PATCH v2 2/2] USB: misc: Add driver for the WCH CH341 in I2C/GPIO mode Date: Thu, 22 Apr 2021 19:28:52 -0500 Message-Id: <20210423002852.3904-2-frank@zago.net> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210423002852.3904-1-frank@zago.net> References: <20210423002852.3904-1-frank@zago.net> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: frank zago The CH341 is a multifunction chip, presenting 3 different USB PID. One of these functions is for I2C/SPI/GPIO. This new driver manages I2C and GPIO. A future update will manage the SPI part as well. The I2C interface can run at 4 different speeds. This driver currently only offer 100MHz. Tested with a variety of I2C sensors, and the IIO subsystem. The GPIO interface offers 8 GPIOs. 6 are read/write, and 2 are rea-only. However the SPI interface will use 6 of them, leaving 2 available GPIOs. Signed-off-by: frank zago --- Changes from v1: - Removed double Signed-off-by - Move Kconfig into the same directory as the driver MAINTAINERS | 6 + drivers/usb/misc/Kconfig | 2 + drivers/usb/misc/Makefile | 1 + drivers/usb/misc/ch341/Kconfig | 17 ++ drivers/usb/misc/ch341/Makefile | 3 + drivers/usb/misc/ch341/ch341-core.c | 87 +++++++++ drivers/usb/misc/ch341/ch341-gpio.c | 249 ++++++++++++++++++++++++++ drivers/usb/misc/ch341/ch341-i2c.c | 267 ++++++++++++++++++++++++++++ drivers/usb/misc/ch341/ch341.h | 50 ++++++ 9 files changed, 682 insertions(+) create mode 100644 drivers/usb/misc/ch341/Kconfig create mode 100644 drivers/usb/misc/ch341/Makefile create mode 100644 drivers/usb/misc/ch341/ch341-core.c create mode 100644 drivers/usb/misc/ch341/ch341-gpio.c create mode 100644 drivers/usb/misc/ch341/ch341-i2c.c create mode 100644 drivers/usb/misc/ch341/ch341.h diff --git a/MAINTAINERS b/MAINTAINERS index 9450e052f1b1..1e9e11db0ae2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19351,6 +19351,12 @@ M: David Härdeman S: Maintained F: drivers/media/rc/winbond-cir.c +WINCHIPHEAD CH341 I2C/GPIO/SPI DRIVER +M: Frank Zago +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/misc/ch341/ + WINSYSTEMS EBC-C384 WATCHDOG DRIVER M: William Breathitt Gray L: linux-watchdog@vger.kernel.org diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 8f1144359012..e16d665f0c94 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -284,3 +284,5 @@ config BRCM_USB_PINMAP This option enables support for remapping some USB external signals, which are typically on dedicated pins on the chip, to any gpio. + +source "drivers/usb/misc/ch341/Kconfig" diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 5f4e598573ab..95c0ca15b8c9 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o obj-$(CONFIG_BRCM_USB_PINMAP) += brcmstb-usb-pinmap.o +obj-$(CONFIG_USB_CH341_CORE) += ch341/ diff --git a/drivers/usb/misc/ch341/Kconfig b/drivers/usb/misc/ch341/Kconfig new file mode 100644 index 000000000000..951a1caa35d6 --- /dev/null +++ b/drivers/usb/misc/ch341/Kconfig @@ -0,0 +1,17 @@ +config USB_CH341_CORE + tristate "USB WinChipHead CH341 in I2C/SPI/GPIO mode" + depends on USB && GPIOLIB && I2C && SPI + help + + If you say yes to this option, support for the CH341 chips, + running in I2C/SPI/GPIO mode will be included. Some versions + of the chip do not support all the functionnalities but + there is no way to differentiate them. For instance the + CH341A and CH341B support everything while the CH341T can + only do I2C. + + The serial mode is not supported by this driver. Use the + CH341 USB serial driver. + + This driver can also be built as a module. If so, the + module will be called ch341-buses. diff --git a/drivers/usb/misc/ch341/Makefile b/drivers/usb/misc/ch341/Makefile new file mode 100644 index 000000000000..7c6429e7a46e --- /dev/null +++ b/drivers/usb/misc/ch341/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_USB_CH341_CORE) := ch341-buses.o + +ch341-buses-objs := ch341-core.o ch341-i2c.o ch341-gpio.o diff --git a/drivers/usb/misc/ch341/ch341-core.c b/drivers/usb/misc/ch341/ch341-core.c new file mode 100644 index 000000000000..19c531715ea3 --- /dev/null +++ b/drivers/usb/misc/ch341/ch341-core.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the CH341A, and CH341B USB to I2C/GPIO adapter + * Driver for the CH341T USB to I2C adapter + * + * Copyright 2021, Frank Zago + * Copyright (c) 2017 Gunar Schorcht (gunar@schorcht.net) + * Copyright (c) 2016 Tse Lun Bien + * Copyright (c) 2014 Marco Gittler + * Copyright (c) 2006-2007 Till Harbaum (Till@Harbaum.org) + * + * The full UART functionality is handled by the CH341 serial driver + */ + +#include +#include + +#include "ch341.h" + +static void ch341_usb_free_device(struct ch341_device *dev) +{ + ch341_gpio_remove(dev); + ch341_i2c_remove(dev); + + usb_set_intfdata(dev->iface, NULL); + usb_put_dev(dev->usb_dev); + + kfree(dev); +} + +static int ch341_usb_probe(struct usb_interface *iface, + const struct usb_device_id *usb_id) +{ + struct ch341_device *dev; + int error; + + dev = kzalloc(sizeof(struct ch341_device), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->usb_dev = usb_get_dev(interface_to_usbdev(iface)); + dev->iface = iface; + mutex_init(&dev->usb_lock); + dev->ep_out = iface->cur_altsetting->endpoint[1].desc.bEndpointAddress; + dev->ep_in = iface->cur_altsetting->endpoint[0].desc.bEndpointAddress; + + usb_set_intfdata(iface, dev); + + error = ch341_i2c_init(dev); + if (error) { + ch341_usb_free_device(dev); + return error; + } + + error = ch341_gpio_init(dev); + if (error) { + ch341_usb_free_device(dev); + return error; + } + + return 0; +} + +static void ch341_usb_disconnect(struct usb_interface *usb_if) +{ + struct ch341_device *dev = usb_get_intfdata(usb_if); + + ch341_usb_free_device(dev); +} + +static const struct usb_device_id ch341_usb_table[] = { + { USB_DEVICE(0x1a86, 0x5512) }, + { } +}; + +static struct usb_driver ch341_usb_driver = { + .name = "ch341-buses", + .id_table = ch341_usb_table, + .probe = ch341_usb_probe, + .disconnect = ch341_usb_disconnect +}; + +module_usb_driver(ch341_usb_driver); + +MODULE_AUTHOR("Various"); +MODULE_DESCRIPTION("ch341 USB to I2C/GPIO adapter"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/misc/ch341/ch341-gpio.c b/drivers/usb/misc/ch341/ch341-gpio.c new file mode 100644 index 000000000000..fff983be6c6c --- /dev/null +++ b/drivers/usb/misc/ch341/ch341-gpio.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPIO interface for the CH341A and CH341B chips. + * + * Copyright 2021, Frank Zago + * Copyright (c) 2017 Gunar Schorcht (gunar@schorcht.net) + * Copyright (c) 2016 Tse Lun Bien + * Copyright (c) 2014 Marco Gittler + * Copyright (c) 2006-2007 Till Harbaum (Till@Harbaum.org) + */ + +/* Notes. + * + * For the CH341, 0=IN, 1=OUT, but for the GPIO subsystem, 1=IN and + * 0=OUT. Some translation happens in a couple places. + */ + +#include "ch341.h" + +#define CH341_GPIO_NUM_PINS 8 /* Number of GPIO pins */ + +#define CH341_CMD_UIO_STREAM 0xAB /* UIO stream command */ + +#define CH341_CMD_UIO_STM_IN 0x00 /* UIO interface IN command (D0~D7) */ +#define CH341_CMD_UIO_STM_OUT 0x80 /* UIO interface OUT command (D0~D5) */ +#define CH341_CMD_UIO_STM_DIR 0x40 /* UIO interface DIR command (D0~D5) */ +#define CH341_CMD_UIO_STM_END 0x20 /* UIO interface END command */ + +/* Masks to describe the 8 GPIOs (pins 15 to 22, a.k.a. D0 to D7.) + * D0 to D5 can read/write, but pins D6 and D7 can only read. + */ +static const u8 pin_can_output = 0b00111111; + +/* Various names appearing on breakout boards. */ +static const char * const gpio_names[CH341_GPIO_NUM_PINS] = { + "D0/CS0", + "D1/CS1", + "D2/CS2", + "D3/SCK/DCK", + "D4/DOUT2", + "D5/MOSI/DOUT/SDO", + "D6/DIN2", + "D7/MISO/DIN" +}; + +static void ch341_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + + seq_printf(s, "pin config : %02x (0=IN, 1=OUT)\n", dev->gpio_dir); + seq_printf(s, "last read : %02x\n", dev->gpio_last_read); + seq_printf(s, "last written: %02x\n", dev->gpio_last_written); +} + +/* Send a command and get a reply if requested */ +static int gpio_transfer(struct ch341_device *dev, int out_len, int in_len) +{ + int actual; + int rc; + + mutex_lock(&dev->usb_lock); + + rc = usb_bulk_msg(dev->usb_dev, + usb_sndbulkpipe(dev->usb_dev, dev->ep_out), + dev->gpio_buf, out_len, + &actual, DEFAULT_TIMEOUT); + if (rc < 0) + goto done; + + if (in_len == 0) { + rc = actual; + goto done; + } + + rc = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, dev->ep_in), + dev->gpio_buf, PKT_SIZE, &actual, DEFAULT_TIMEOUT); + + if (rc == 0) + rc = actual; + +done: + mutex_unlock(&dev->usb_lock); + + return rc; +} + +static int read_inputs(struct ch341_device *dev) +{ + int result; + + mutex_lock(&dev->gpio_lock); + + dev->gpio_buf[0] = CH341_CMD_UIO_STREAM; + dev->gpio_buf[1] = CH341_CMD_UIO_STM_DIR | dev->gpio_dir; + dev->gpio_buf[2] = CH341_CMD_UIO_STM_IN; + dev->gpio_buf[3] = CH341_CMD_UIO_STM_END; + + result = gpio_transfer(dev, 4, 1); + + if (result == 1) + dev->gpio_last_read = dev->gpio_buf[0]; + + mutex_unlock(&dev->gpio_lock); + + return (result != 1) ? result : 0; +} + +static int ch341_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + int rc; + + rc = read_inputs(dev); + if (rc) + return rc; + + return (dev->gpio_last_read & BIT(offset)) ? 1 : 0; +} + +static int ch341_gpio_get_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + int rc; + + rc = read_inputs(dev); + if (rc) + return rc; + + *bits = dev->gpio_last_read & *mask; + + return 0; +} + +static void write_outputs(struct ch341_device *dev) +{ + mutex_lock(&dev->gpio_lock); + + dev->gpio_buf[0] = CH341_CMD_UIO_STREAM; + dev->gpio_buf[1] = CH341_CMD_UIO_STM_DIR | dev->gpio_dir; + dev->gpio_buf[2] = CH341_CMD_UIO_STM_OUT | (dev->gpio_last_written & dev->gpio_dir); + dev->gpio_buf[3] = CH341_CMD_UIO_STM_END; + + gpio_transfer(dev, 4, 0); + + mutex_unlock(&dev->gpio_lock); +} + +static void ch341_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + + if (value) + dev->gpio_last_written |= BIT(offset); + else + dev->gpio_last_written &= ~BIT(offset); + + write_outputs(dev); +} + +static void ch341_gpio_set_multiple(struct gpio_chip *chip, + unsigned long *mask, unsigned long *bits) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + + dev->gpio_last_written &= ~*mask; + dev->gpio_last_written |= (*bits & *mask); + + write_outputs(dev); +} + +static int ch341_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + + return (dev->gpio_dir & BIT(offset)) ? 0 : 1; +} + +static int ch341_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + + dev->gpio_dir &= ~BIT(offset); + + return 0; +} + +static int ch341_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct ch341_device *dev = gpiochip_get_data(chip); + u8 mask = BIT(offset); + + if (!(pin_can_output & mask)) + return -EINVAL; + + dev->gpio_dir |= mask; + + ch341_gpio_set(chip, offset, value); + + return 0; +} + +void ch341_gpio_remove(struct ch341_device *dev) +{ + if (!dev->gpio_init) + return; + + gpiochip_remove(&dev->gpio); +} + +int ch341_gpio_init(struct ch341_device *dev) +{ + struct gpio_chip *gpio = &dev->gpio; + int result; + + gpio->label = "ch341"; + gpio->parent = &dev->usb_dev->dev; + gpio->owner = THIS_MODULE; + gpio->get_direction = ch341_gpio_get_direction; + gpio->direction_input = ch341_gpio_direction_input; + gpio->direction_output = ch341_gpio_direction_output; + gpio->get = ch341_gpio_get; + gpio->get_multiple = ch341_gpio_get_multiple; + gpio->set = ch341_gpio_set; + gpio->set_multiple = ch341_gpio_set_multiple; + gpio->dbg_show = ch341_gpio_dbg_show; + gpio->base = -1; + gpio->ngpio = CH341_GPIO_NUM_PINS; + gpio->names = gpio_names; + gpio->can_sleep = true; + + dev->gpio_dir = 0; /* All pins as input */ + + mutex_init(&dev->gpio_lock); + + result = gpiochip_add_data(gpio, dev); + if (result) { + dev_err(&dev->usb_dev->dev, "Could not add GPIO\n"); + return result; + } + + dev->gpio_init = true; + + return 0; +} diff --git a/drivers/usb/misc/ch341/ch341-i2c.c b/drivers/usb/misc/ch341/ch341-i2c.c new file mode 100644 index 000000000000..be675dc54166 --- /dev/null +++ b/drivers/usb/misc/ch341/ch341-i2c.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * I2C interface for the CH341A, CH341B and CH341T. + * + * Copyright 2021, Frank Zago + * Copyright (c) 2016 Tse Lun Bien + * Copyright (c) 2014 Marco Gittler + * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org) + */ + +#include "ch341.h" + +/* Support not yet implemented */ +#define CH341_I2C_LOW_SPEED 0 /* 20kHz */ +#define CH341_I2C_STANDARD_SPEED 1 /* 100kHz */ +#define CH341_I2C_FAST_SPEED 2 /* 400kHz */ +#define CH341_I2C_HIGH_SPEED 3 /* 750kHz */ + +#define CH341_CMD_I2C_STREAM 0xAA +#define CH341_CMD_I2C_STM_END 0x00 + +#define CH341_CMD_I2C_STM_STA 0x74 +#define CH341_CMD_I2C_STM_STO 0x75 +#define CH341_CMD_I2C_STM_OUT 0x80 +#define CH341_CMD_I2C_STM_IN 0xC0 +#define CH341_CMD_I2C_STM_SET 0x60 +#define CH341_CMD_I2C_STM_MS 0x50 + +#define CH341_CTRL_VENDOR_VERSION 0x5F /* version of chip */ +#define CH341_CTRL_VENDOR_READ_TYPE 0XC0 /* vendor control read */ + +/* Append a write command to the current request */ +static int append_write(struct ch341_device *dev, const struct i2c_msg *msg) +{ + u8 *out = dev->i2c_buf; + int len; + u8 *p; + bool start_done = false; + + len = msg->len; + p = msg->buf; + + while (len) { + int to_write; + int avail; + + if (dev->idx_out % PKT_SIZE) { + /* Finish current packet, and advance to the next one */ + out[dev->idx_out++] = CH341_CMD_I2C_STM_END; + dev->out_pkt++; + dev->idx_out = dev->out_pkt * PKT_SIZE; + + if (dev->out_pkt == PKT_COUNT) + return -E2BIG; + } + + out[dev->idx_out++] = CH341_CMD_I2C_STREAM; + + /* account for stream start and end, STA and possible STO */ + avail = PKT_SIZE - 4; + + if (!start_done) { + /* Each message has a start */ + out[dev->idx_out++] = CH341_CMD_I2C_STM_STA; + + avail -= 2; /* room for STA and device address */ + } + + to_write = min_t(int, len, avail); + + if (!start_done) { + out[dev->idx_out++] = CH341_CMD_I2C_STM_OUT | (to_write + 1); + out[dev->idx_out++] = msg->addr << 1; + + start_done = true; + } else { + out[dev->idx_out++] = CH341_CMD_I2C_STM_OUT | to_write; + } + + memcpy(&out[dev->idx_out], p, to_write); + dev->idx_out += to_write; + len -= to_write; + } + + return 0; +} + +/* Append a read command to the request. It usually follows a write + * command. When that happens, the driver will attempt to concat the + * read command into the same packet. This is necessary for eeprom + * devices, otherwise the full request would go past 128 bytes, which + * the adapter doesn't support. + */ +static int append_read(struct ch341_device *dev, const struct i2c_msg *msg) +{ + u8 *out = dev->i2c_buf; + bool start_done = false; + int len; + + len = msg->len; + + while (len) { + int to_read; + + if (dev->idx_out % PKT_SIZE) { + if (!start_done && + (dev->idx_out % PKT_SIZE) < (PKT_SIZE - 7)) { + /* There's enough left for a read */ + } else { + /* Finish current packet, and advance to the next one */ + out[dev->idx_out++] = CH341_CMD_I2C_STM_END; + dev->out_pkt++; + dev->idx_out = dev->out_pkt * PKT_SIZE; + + if (dev->out_pkt == PKT_COUNT) + return -E2BIG; + + out[dev->idx_out++] = CH341_CMD_I2C_STREAM; + } + } else { + out[dev->idx_out++] = CH341_CMD_I2C_STREAM; + } + + if (!start_done) { + /* Each message has a start */ + out[dev->idx_out++] = CH341_CMD_I2C_STM_STA; + out[dev->idx_out++] = CH341_CMD_I2C_STM_OUT | 1; + out[dev->idx_out++] = msg->addr << 1 | 1; + + start_done = true; + } + + /* Apparently the last command must be an STM_IN to + * read the last byte. Without it, the adapter gets + * lost. + */ + to_read = min_t(int, len, 32); + len -= to_read; + if (len == 0) { + if (to_read > 1) + out[dev->idx_out++] = CH341_CMD_I2C_STM_IN | (to_read - 1); + out[dev->idx_out++] = CH341_CMD_I2C_STM_IN; + } else { + out[dev->idx_out++] = CH341_CMD_I2C_STM_IN | to_read; + } + } + + return 0; +} + +static int ch341_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + struct ch341_device *dev = adapter->algo_data; + int retval; + int i; + u8 *out = dev->i2c_buf; + int actual; + + /* Prepare the request */ + dev->idx_out = 0; + dev->out_pkt = 0; + + for (i = 0; i != num; i++) { + if (msgs[i].flags & I2C_M_RD) + retval = append_read(dev, &msgs[i]); + else + retval = append_write(dev, &msgs[i]); + + if (retval) + return retval; + } + + out[dev->idx_out++] = CH341_CMD_I2C_STM_STO; + out[dev->idx_out++] = CH341_CMD_I2C_STM_END; + + dev_dbg(&dev->adapter.dev, "bulk_out request with %d bytes\n", + dev->idx_out); + + mutex_lock(&dev->usb_lock); + + /* Issue the request */ + retval = usb_bulk_msg(dev->usb_dev, + usb_sndbulkpipe(dev->usb_dev, dev->ep_out), + dev->i2c_buf, dev->idx_out, &actual, DEFAULT_TIMEOUT); + if (retval < 0) { + mutex_unlock(&dev->usb_lock); + return retval; + } + + for (i = 0; i != num; i++) { + if (!(msgs[i].flags & I2C_M_RD)) + continue; + + retval = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, dev->ep_in), + dev->i2c_buf, msgs[i].len, &actual, DEFAULT_TIMEOUT); + + if (retval) { + mutex_lock(&dev->usb_lock); + return retval; + } + + if (actual != msgs[i].len) { + mutex_lock(&dev->usb_lock); + return -EIO; + } + + memcpy(msgs[i].buf, dev->i2c_buf, actual); + } + + mutex_unlock(&dev->usb_lock); + + return num; +} + +static u32 ch341_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm ch341_i2c_algorithm = { + .master_xfer = ch341_i2c_xfer, + .functionality = ch341_i2c_func, +}; + +void ch341_i2c_remove(struct ch341_device *dev) +{ + if (!dev->i2c_init) + return; + + i2c_del_adapter(&dev->adapter); +} + +int ch341_i2c_init(struct ch341_device *dev) +{ + int retval; + int actual; + + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &ch341_i2c_algorithm; + dev->adapter.algo_data = dev; + snprintf(dev->adapter.name, sizeof(dev->adapter.name), + "CH341 I2C USB bus %03d device %03d", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + dev->adapter.dev.parent = &dev->iface->dev; + + /* Set ch341 i2c speed */ + dev->i2c_buf[0] = CH341_CMD_I2C_STREAM; + dev->i2c_buf[1] = CH341_CMD_I2C_STM_SET | CH341_I2C_STANDARD_SPEED; + dev->i2c_buf[2] = CH341_CMD_I2C_STM_END; + mutex_lock(&dev->usb_lock); + retval = usb_bulk_msg(dev->usb_dev, + usb_sndbulkpipe(dev->usb_dev, dev->ep_out), + dev->i2c_buf, 3, &actual, DEFAULT_TIMEOUT); + mutex_unlock(&dev->usb_lock); + if (retval < 0) { + dev_err(&dev->adapter.dev, "Cannot set I2C speed\n"); + return -EIO; + } + + i2c_add_adapter(&dev->adapter); + dev->i2c_init = true; + + return 0; +} diff --git a/drivers/usb/misc/ch341/ch341.h b/drivers/usb/misc/ch341/ch341.h new file mode 100644 index 000000000000..4ddd77c2e08c --- /dev/null +++ b/drivers/usb/misc/ch341/ch341.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Definitions for CH341 driver + */ + +#include +#include +#include + +#define DEFAULT_TIMEOUT 1000 /* 1s USB requests timeout */ + +/* I2C - The maximum request size is 128 bytes, for reading and + * writing. The adapter will get the buffer in packets of up to 32 + * bytes. The I2C stream must start and stop in each 32-byte packet. + * Reading must also be split, up to 32-byte per packet. + */ +#define PKT_SIZE 32 +#define PKT_COUNT 4 + +struct ch341_device { + struct usb_device *usb_dev; + struct usb_interface *iface; + struct mutex usb_lock; + + int ep_in; + int ep_out; + + /* I2C */ + struct i2c_adapter adapter; + bool i2c_init; + + /* I2C request and response state */ + int idx_out; /* current offset in buf */ + int out_pkt; /* current packet */ + u8 i2c_buf[PKT_COUNT * PKT_SIZE]; + + /* GPIO */ + struct gpio_chip gpio; + struct mutex gpio_lock; + bool gpio_init; + u8 gpio_dir; /* 1 bit per pin, 0=IN, 1=OUT. */ + u8 gpio_last_read; /* last GPIO values read */ + u8 gpio_last_written; /* last GPIO values written */ + u8 gpio_buf[PKT_SIZE]; +}; + +void ch341_i2c_remove(struct ch341_device *dev); +int ch341_i2c_init(struct ch341_device *dev); +void ch341_gpio_remove(struct ch341_device *dev); +int ch341_gpio_init(struct ch341_device *dev); -- 2.27.0