From: Lee Jones <lee.jones@linaro.org>
To: lee.jones@linaro.org
Cc: linux-kernel@vger.kernel.org, Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 6/7] mfd: si476x-cmd: Fix a bunch of incorrectly documented function names
Date: Thu, 20 May 2021 13:08:19 +0100 [thread overview]
Message-ID: <20210520120820.3465562-7-lee.jones@linaro.org> (raw)
In-Reply-To: <20210520120820.3465562-1-lee.jones@linaro.org>
Fixes the following W=1 kernel build warning(s):
drivers/mfd/si476x-cmd.c:406: warning: expecting prototype for si476x_cmd_func_info(). Prototype was for si476x_core_cmd_func_info() instead
drivers/mfd/si476x-cmd.c:437: warning: expecting prototype for si476x_cmd_set_property(). Prototype was for si476x_core_cmd_set_property() instead
drivers/mfd/si476x-cmd.c:463: warning: expecting prototype for si476x_cmd_get_property(). Prototype was for si476x_core_cmd_get_property() instead
drivers/mfd/si476x-cmd.c:525: warning: expecting prototype for si476x_cmd_dig_audio_pin_cfg(). Prototype was for si476x_core_cmd_dig_audio_pin_cfg() instead
drivers/mfd/si476x-cmd.c:574: warning: expecting prototype for si476x_cmd_zif_pin_cfg(). Prototype was for si476x_core_cmd_zif_pin_cfg() instead
drivers/mfd/si476x-cmd.c:631: warning: expecting prototype for si476x_cmd_ic_link_gpo_ctl_pin_cfg(). Prototype was for si476x_core_cmd_ic_link_gpo_ctl_pin_cfg() instead
drivers/mfd/si476x-cmd.c:662: warning: expecting prototype for si476x_cmd_ana_audio_pin_cfg(). Prototype was for si476x_core_cmd_ana_audio_pin_cfg() instead
drivers/mfd/si476x-cmd.c:697: warning: expecting prototype for si476x_cmd_intb_pin_cfg(). Prototype was for si476x_core_cmd_intb_pin_cfg_a10() instead
drivers/mfd/si476x-cmd.c:742: warning: expecting prototype for si476x_cmd_am_rsq_status(). Prototype was for si476x_core_cmd_am_rsq_status() instead
drivers/mfd/si476x-cmd.c:874: warning: expecting prototype for si476x_cmd_fm_seek_start(). Prototype was for si476x_core_cmd_fm_seek_start() instead
drivers/mfd/si476x-cmd.c:905: warning: expecting prototype for si476x_cmd_fm_rds_status(). Prototype was for si476x_core_cmd_fm_rds_status() instead
drivers/mfd/si476x-cmd.c:1050: warning: expecting prototype for si476x_cmd_am_seek_start(). Prototype was for si476x_core_cmd_am_seek_start() instead
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/si476x-cmd.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
index d15b3e7833692..0e4b89a967ed6 100644
--- a/drivers/mfd/si476x-cmd.c
+++ b/drivers/mfd/si476x-cmd.c
@@ -390,7 +390,7 @@ static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
}
/**
- * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
+ * si476x_core_cmd_func_info() - send 'FUNC_INFO' command to the device
* @core: device to send the command to
* @info: struct si476x_func_info to fill all the information
* returned by the command
@@ -424,7 +424,7 @@ int si476x_core_cmd_func_info(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
/**
- * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
+ * si476x_core_cmd_set_property() - send 'SET_PROPERTY' command to the device
* @core: device to send the command to
* @property: property address
* @value: property value
@@ -452,7 +452,7 @@ int si476x_core_cmd_set_property(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
/**
- * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
+ * si476x_core_cmd_get_property() - send 'GET_PROPERTY' command to the device
* @core: device to send the command to
* @property: property address
*
@@ -481,7 +481,7 @@ int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
/**
- * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
+ * si476x_core_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
* the device
* @core: device to send the command to
* @dclk: DCLK pin function configuration:
@@ -539,7 +539,7 @@ int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
/**
- * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
+ * si476x_core_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
* @core: - device to send the command to
* @iqclk: - IQCL pin function configuration:
* SI476X_IQCLK_NOOP - do not modify the behaviour
@@ -588,7 +588,7 @@ int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
/**
- * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
+ * si476x_core_cmd_ic_link_gpo_ctl_pin_cfg - send
* 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
* @core: - device to send the command to
* @icin: - ICIN pin function configuration:
@@ -645,7 +645,7 @@ int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
/**
- * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
+ * si476x_core_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
* device
* @core: - device to send the command to
* @lrout: - LROUT pin function configuration:
@@ -674,7 +674,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
/**
- * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
+ * si476x_core_cmd_intb_pin_cfg_a10 - send 'INTB_PIN_CFG' command to the device
* @core: - device to send the command to
* @intb: - INTB pin function configuration:
* SI476X_INTB_NOOP - do not modify the behaviour
@@ -726,7 +726,7 @@ static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
/**
- * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
+ * si476x_core_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
* device
* @core: - device to send the command to
* @rsqargs: - pointer to a structure containing a group of sub-args
@@ -856,7 +856,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
/**
- * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
+ * si476x_core_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
* device
* @core: - device to send the command to
* @seekup: - if set the direction of the search is 'up'
@@ -884,7 +884,7 @@ int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
/**
- * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
+ * si476x_core_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
* device
* @core: - device to send the command to
* @status_only: - if set the data is not removed from RDSFIFO,
@@ -1032,7 +1032,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
/**
- * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
+ * si476x_core_cmd_am_seek_start - send 'FM_SEEK_START' command to the
* device
* @core: - device to send the command to
* @seekup: - if set the direction of the search is 'up'
--
2.31.1
next prev parent reply other threads:[~2021-05-20 12:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-20 12:08 [PATCH 0/7] Rid W=1 warnings from MFD Lee Jones
2021-05-20 12:08 ` Lee Jones
2021-05-20 12:08 ` [PATCH 1/7] mfd: wm831x-core: Fix incorrect function name wm831x_reg_unlock() Lee Jones
2021-05-21 9:02 ` Charles Keepax
2021-05-20 12:08 ` [PATCH 2/7] mfd: twl-core: Fix incorrect function name twl_regcache_bypass() Lee Jones
2021-05-20 12:08 ` [PATCH 3/7] mfd: db8500-prcmu: Fix multiple incorrectly documented function names Lee Jones
2021-05-20 12:08 ` Lee Jones
2021-05-20 12:08 ` [PATCH 4/7] mfd: omap-usb-host: File headers are not good candidates for kernel-doc Lee Jones
2021-05-20 12:08 ` [PATCH 5/7] mfd: omap-usb-tll: " Lee Jones
2021-05-20 12:08 ` Lee Jones [this message]
2021-05-20 12:08 ` [PATCH 7/7] mfd: si476x-i2c: Fix incorrectly documented function names Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210520120820.3465562-7-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=andrew.smirnov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.