* [PATCH][next] octeontx2-af: Fix a handful of spelling mistakes and typos
@ 2021-07-06 8:49 Colin King
0 siblings, 0 replies; only message in thread
From: Colin King @ 2021-07-06 8:49 UTC (permalink / raw
To: Sunil Goutham, Linu Cherian, Geetha sowjanya, Jerin Jacob,
hariprasad, Subbaraya Sundeep, David S . Miller, Jakub Kicinski,
netdev
Cc: kernel-janitors, linux-kernel
From: Colin Ian King <colin.king@canonical.com>
There are quite a few spelling mistakes in dev_err error messages
and comments. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 4 ++--
drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 4 ++--
.../ethernet/marvell/octeontx2/af/rvu_cn10k.c | 10 +++++-----
.../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 4 ++--
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 16 ++++++++--------
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 12 ++++++------
6 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 9169849881bf..7b548bd7238c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -972,7 +972,7 @@ static int cgx_link_usertable_index_map(int speed)
static void set_mod_args(struct cgx_set_link_mode_args *args,
u32 speed, u8 duplex, u8 autoneg, u64 mode)
{
- /* Fill default values incase of user did not pass
+ /* Fill default values in case of user did not pass
* valid parameters
*/
if (args->duplex == DUPLEX_UNKNOWN)
@@ -1183,7 +1183,7 @@ static irqreturn_t cgx_fwi_event_handler(int irq, void *data)
/* Ensure response is updated before thread context starts */
smp_wmb();
- /* There wont be separate events for link change initiated from
+ /* There won't be separate events for link change initiated from
* software; Hence report the command responses as events
*/
if (cgx_cmdresp_is_linkevent(event))
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 1ee37853f338..4ceda6cdacf9 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -117,7 +117,7 @@ static int ptp_adjfine(struct ptp *ptp, long scaled_ppm)
/* The hardware adds the clock compensation value to the PTP clock
* on every coprocessor clock cycle. Typical convention is that it
- * represent number of nanosecond betwen each cycle. In this
+ * represent number of nanosecond between each cycle. In this
* convention compensation value is in 64 bit fixed-point
* representation where upper 32 bits are number of nanoseconds
* and lower is fractions of nanosecond.
@@ -127,7 +127,7 @@ static int ptp_adjfine(struct ptp *ptp, long scaled_ppm)
* arithmetic on following formula
* comp = tbase + tbase * scaled_ppm / (1M * 2^16)
* where tbase is the basic compensation value calculated
- * initialy in the probe function.
+ * initially in the probe function.
*/
comp = ((u64)1000000000ull << 32) / ptp->clock_rate;
/* convert scaled_ppm to ppb */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
index 8d48b64485c6..cd8c07e14c28 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cn10k.c
@@ -62,7 +62,7 @@ static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc,
int err;
if (!iova) {
- dev_err(rvu->dev, "%s Requested Null address for transulation\n", __func__);
+ dev_err(rvu->dev, "%s Requested Null address for translation\n", __func__);
return -EINVAL;
}
@@ -74,12 +74,12 @@ static int rvu_get_lmtaddr(struct rvu *rvu, u16 pcifunc,
err = rvu_poll_reg(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS, BIT_ULL(0), false);
if (err) {
- dev_err(rvu->dev, "%s LMTLINE iova transulation failed\n", __func__);
+ dev_err(rvu->dev, "%s LMTLINE iova translation failed\n", __func__);
return err;
}
val = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_SMMU_ADDR_RSP_STS);
if (val & ~0x1ULL) {
- dev_err(rvu->dev, "%s LMTLINE iova transulation failed err:%llx\n", __func__, val);
+ dev_err(rvu->dev, "%s LMTLINE iova translation failed err:%llx\n", __func__, val);
return -EIO;
}
/* PA[51:12] = RVU_AF_SMMU_TLN_FLIT1[60:21]
@@ -243,7 +243,7 @@ int rvu_set_channels_base(struct rvu *rvu)
/* If programmable channels are present then configure
* channels such that all channel numbers are contiguous
* leaving no holes. This way the new CPT channels can be
- * accomodated. The order of channel numbers assigned is
+ * accommodated. The order of channel numbers assigned is
* LBK, SDP, CGX and CPT.
*/
hw->sdp_chan_base = hw->lbk_chan_base + hw->lbk_links *
@@ -294,7 +294,7 @@ static void rvu_lbk_set_channels(struct rvu *rvu)
u16 chans;
/* To loopback packets between multiple NIX blocks
- * mutliple LBK blocks are needed. With two NIX blocks,
+ * multiple LBK blocks are needed. With two NIX blocks,
* four LBK blocks are needed and each LBK block
* source and destination are as follows:
* LBK0 - source NIX0 and destination NIX1
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
index 370d4ca1e5ed..637d7c0052f2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
@@ -431,7 +431,7 @@ static void print_npa_qsize(struct seq_file *m, struct rvu_pfvf *pfvf)
/* The 'qsize' entry dumps current Aura/Pool context Qsize
* and each context's current enable/disable status in a bitmap.
*/
-static int rvu_dbg_qsize_display(struct seq_file *filp, void *unsused,
+static int rvu_dbg_qsize_display(struct seq_file *filp, void *unused,
int blktype)
{
void (*print_qsize)(struct seq_file *filp,
@@ -2141,7 +2141,7 @@ static void rvu_print_npc_mcam_info(struct seq_file *s,
}
}
-static int rvu_dbg_npc_mcam_info_display(struct seq_file *filp, void *unsued)
+static int rvu_dbg_npc_mcam_info_display(struct seq_file *filp, void *unused)
{
struct rvu *rvu = filp->private;
int pf, vf, numvfs, blkaddr;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index aeae37704428..a611d43bc09a 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -398,11 +398,11 @@ static int rvu_nix_get_bpid(struct rvu *rvu, struct nix_bp_cfg_req *req,
pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc);
/* Backpressure IDs range division
- * CGX channles are mapped to (0 - 191) BPIDs
- * LBK channles are mapped to (192 - 255) BPIDs
- * SDP channles are mapped to (256 - 511) BPIDs
+ * CGX channels are mapped to (0 - 191) BPIDs
+ * LBK channels are mapped to (192 - 255) BPIDs
+ * SDP channels are mapped to (256 - 511) BPIDs
*
- * Lmac channles and bpids mapped as follows
+ * Lmac channels and bpids mapped as follows
* cgx(0)_lmac(0)_chan(0 - 15) = bpid(0 - 15)
* cgx(0)_lmac(1)_chan(0 - 15) = bpid(16 - 31) ....
* cgx(1)_lmac(0)_chan(0 - 15) = bpid(64 - 79) ....
@@ -1491,7 +1491,7 @@ static int nix_check_txschq_alloc_req(struct rvu *rvu, int lvl, u16 pcifunc,
return 0;
}
- /* Get free SCHQ count and check if request can be accomodated */
+ /* Get free SCHQ count and check if request can be accommodated */
if (hw->cap.nix_fixed_txschq_mapping) {
nix_get_txschq_range(rvu, pcifunc, link, &start, &end);
schq = start + (pcifunc & RVU_PFVF_FUNC_MASK);
@@ -1625,7 +1625,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
mutex_lock(&rvu->rsrc_lock);
/* Check if request is valid as per HW capabilities
- * and can be accomodated.
+ * and can be accommodated.
*/
for (lvl = 0; lvl < NIX_TXSCH_LVL_CNT; lvl++) {
rc = nix_check_txschq_alloc_req(rvu, lvl, pcifunc, nix_hw, req);
@@ -3041,7 +3041,7 @@ static int reserve_flowkey_alg_idx(struct rvu *rvu, int blkaddr, u32 flow_cfg)
NIX_AF_RX_FLOW_KEY_ALGX_FIELDX(hw->flowkey.in_use,
fid), field[fid]);
- /* Store the flow_cfg for futher lookup */
+ /* Store the flow_cfg for further lookup */
rc = hw->flowkey.in_use;
hw->flowkey.flowkey[rc] = flow_cfg;
hw->flowkey.in_use++;
@@ -3723,7 +3723,7 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
(ltdefs->rx_apad1.ltype_match << 4) |
ltdefs->rx_apad1.ltype_mask);
- /* Receive ethertype defination register defines layer
+ /* Receive ethertype definition register defines layer
* information in NPC_RESULT_S to identify the Ethertype
* location in L2 header. Used for Ethertype overwriting
* in inline IPsec flow.
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 3612e0a2cab3..35ef314a8b23 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -1048,7 +1048,7 @@ void npc_enadis_default_mce_entry(struct rvu *rvu, u16 pcifunc,
return;
}
- /* return incase mce list is not enabled */
+ /* return in case mce list is not enabled */
pfvf = rvu_get_pfvf(rvu, pcifunc & ~RVU_PFVF_FUNC_MASK);
if (hw->cap.nix_rx_multicast && is_vf(pcifunc) &&
type != NIXLF_BCAST_ENTRY && !pfvf->use_mce_list)
@@ -2298,7 +2298,7 @@ npc_get_mcam_search_range_priority(struct npc_mcam *mcam,
* - If reference entry is not in hprio zone then
* search range: ref_entry to end.
* - If reference entry is in hprio zone and if
- * request can be accomodated in non-hprio zone then
+ * request can be accommodated in non-hprio zone then
* search range: 'start of middle zone' to 'end'
* - else search in reverse, so that less number of hprio
* zone entries are allocated.
@@ -2325,7 +2325,7 @@ npc_get_mcam_search_range_priority(struct npc_mcam *mcam,
* - If reference entry is not in lprio zone then
* search range: 0 to ref_entry.
* - If reference entry is in lprio zone and if
- * request can be accomodated in middle zone then
+ * request can be accommodated in middle zone then
* search range: 'hprio_end' to 'lprio_start'
*/
@@ -2376,7 +2376,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
* Reverse bitmap is used to allocate entries
* - when a higher priority entry is requested
* - when available free entries are less.
- * Lower priority ones out of avaialble free entries are always
+ * Lower priority ones out of available free entries are always
* chosen when 'high vs low' question arises.
*/
@@ -2397,7 +2397,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
hp_fcnt = npc_mcam_get_free_count(mcam->bmap, 0, mcam->hprio_end);
fcnt = mcam->bmap_fcnt - lp_fcnt - hp_fcnt;
- /* Check if request can be accomodated in the middle zone */
+ /* Check if request can be accommodated in the middle zone */
if (fcnt > req->count) {
start = mcam->hprio_end;
end = mcam->lprio_start;
@@ -2461,7 +2461,7 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc,
}
}
- /* If allocating requested no of entries is unsucessful,
+ /* If allocating requested no of entries is unsuccessful,
* expand the search range to full bitmap length and retry.
*/
if (!req->priority && (rsp->count < req->count) &&
--
2.31.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-07-06 8:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-07-06 8:49 [PATCH][next] octeontx2-af: Fix a handful of spelling mistakes and typos Colin King
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.