* [PATCH v1 1/1] ray_cs: use %*ph to print small buffer
@ 2021-07-12 14:29 Andy Shevchenko
2021-08-21 17:14 ` Kalle Valo
0 siblings, 1 reply; 5+ messages in thread
From: Andy Shevchenko @ 2021-07-12 14:29 UTC (permalink / raw
To: Andy Shevchenko, linux-wireless, netdev, linux-kernel
Cc: Kalle Valo, David S. Miller, Jakub Kicinski
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/net/wireless/ray_cs.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 590bd974d94f..de614ac60421 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2424,9 +2424,7 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
/* if we are trying to get authenticated */
if (local->sparm.b4.a_network_type == ADHOC) {
- pr_debug("ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
- msg->var[0], msg->var[1], msg->var[2], msg->var[3],
- msg->var[4], msg->var[5]);
+ pr_debug("ray_cs rx_auth var= %6ph\n", msg->var);
if (msg->var[2] == 1) {
pr_debug("ray_cs Sending authentication response.\n");
if (!build_auth_frame
--
2.30.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] ray_cs: use %*ph to print small buffer
2021-07-12 14:29 [PATCH v1 1/1] ray_cs: use %*ph to print small buffer Andy Shevchenko
@ 2021-08-21 17:14 ` Kalle Valo
2021-08-21 19:38 ` Joe Perches
0 siblings, 1 reply; 5+ messages in thread
From: Kalle Valo @ 2021-08-21 17:14 UTC (permalink / raw
To: Andy Shevchenko
Cc: Andy Shevchenko, linux-wireless, netdev, linux-kernel,
David S. Miller, Jakub Kicinski
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
> Use %*ph format to print small buffer as hex string.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Patch applied to wireless-drivers-next.git, thanks.
502213fd8fca ray_cs: use %*ph to print small buffer
--
https://patchwork.kernel.org/project/linux-wireless/patch/20210712142943.23981-1-andriy.shevchenko@linux.intel.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] ray_cs: use %*ph to print small buffer
2021-08-21 17:14 ` Kalle Valo
@ 2021-08-21 19:38 ` Joe Perches
2021-08-22 5:08 ` Kalle Valo
0 siblings, 1 reply; 5+ messages in thread
From: Joe Perches @ 2021-08-21 19:38 UTC (permalink / raw
To: Kalle Valo, Andy Shevchenko
Cc: linux-wireless, netdev, linux-kernel, David S. Miller,
Jakub Kicinski
On Sat, 2021-08-21 at 17:14 +0000, Kalle Valo wrote:
> Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
>
> > Use %*ph format to print small buffer as hex string.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> Patch applied to wireless-drivers-next.git, thanks.
>
> 502213fd8fca ray_cs: use %*ph to print small buffer
>
There's one more of these in the same file but it's in an #ifdef 0 block...
---
drivers/net/wireless/ray_cs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 590bd974d94f4..849216fbb8363 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2284,9 +2284,9 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
DUMP_PREFIX_NONE, 16, 1,
skb->data, 64, true);
printk(KERN_DEBUG
- "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
+ "type = %08x, xsap = %02x%02x%02x, org = %3phN\n",
ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
- psnap->org[0], psnap->org[1], psnap->org[2]);
+ psnap->org);
printk(KERN_DEBUG "untranslate skb->data = %p\n", skb->data);
}
#endif
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] ray_cs: use %*ph to print small buffer
2021-08-21 19:38 ` Joe Perches
@ 2021-08-22 5:08 ` Kalle Valo
2021-08-22 7:14 ` Joe Perches
0 siblings, 1 reply; 5+ messages in thread
From: Kalle Valo @ 2021-08-22 5:08 UTC (permalink / raw
To: Joe Perches
Cc: Andy Shevchenko, linux-wireless, netdev, linux-kernel,
David S. Miller, Jakub Kicinski
Joe Perches <joe@perches.com> writes:
> On Sat, 2021-08-21 at 17:14 +0000, Kalle Valo wrote:
>> Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
>>
>> > Use %*ph format to print small buffer as hex string.
>> >
>> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>>
>> Patch applied to wireless-drivers-next.git, thanks.
>>
>> 502213fd8fca ray_cs: use %*ph to print small buffer
>>
>
> There's one more of these in the same file but it's in an #ifdef 0 block...
I would rather remove the whole ifdef 0 block, patches welcome.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 1/1] ray_cs: use %*ph to print small buffer
2021-08-22 5:08 ` Kalle Valo
@ 2021-08-22 7:14 ` Joe Perches
0 siblings, 0 replies; 5+ messages in thread
From: Joe Perches @ 2021-08-22 7:14 UTC (permalink / raw
To: Kalle Valo
Cc: Andy Shevchenko, linux-wireless, netdev, linux-kernel,
David S. Miller, Jakub Kicinski
On Sun, 2021-08-22 at 08:08 +0300, Kalle Valo wrote:
> Joe Perches <joe@perches.com> writes:
>
> > On Sat, 2021-08-21 at 17:14 +0000, Kalle Valo wrote:
> > > Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
> > >
> > > > Use %*ph format to print small buffer as hex string.
> > > >
> > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > >
> > > Patch applied to wireless-drivers-next.git, thanks.
> > >
> > > 502213fd8fca ray_cs: use %*ph to print small buffer
> > >
> >
> > There's one more of these in the same file but it's in an #ifdef 0 block...
>
> I would rather remove the whole ifdef 0 block, patches welcome.
>
It'd probably take you about 20 seconds if you do it yourself.
$ git grep -P -n '^\s*#\s*if\s+0\b' drivers/net/wireless/ray_cs.c
drivers/net/wireless/ray_cs.c:637:#if 0
drivers/net/wireless/ray_cs.c:2281:#if 0
drivers/net/wireless/ray_cs.c:2341:#if 0
Rather a bit more time if you want to do the whole kernel...
$ git grep -P -n '^\s*#\s*if\s+0\b' | wc -l
1558
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-08-22 7:14 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-07-12 14:29 [PATCH v1 1/1] ray_cs: use %*ph to print small buffer Andy Shevchenko
2021-08-21 17:14 ` Kalle Valo
2021-08-21 19:38 ` Joe Perches
2021-08-22 5:08 ` Kalle Valo
2021-08-22 7:14 ` Joe Perches
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.