From: Nicholas Piggin <npiggin@gmail.com>
To: qemu-ppc@nongnu.org
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
qemu-devel@nongnu.org, "Cédric Le Goater" <clg@kaod.org>,
"Daniel Henrique Barboza" <danielhb413@gmail.com>
Subject: [PATCH v2] ppc/pnv: Add initial P9/10 SBE model
Date: Thu, 11 Aug 2022 19:37:26 +1000 [thread overview]
Message-ID: <20220811093726.1442343-1-npiggin@gmail.com> (raw)
The SBE (Self Boot Engine) are on-chip microcontrollers that perform
early boot steps, as well as provide some runtime facilities (e.g.,
timer, secure register access, MPIPL). The latter facilities are
accessed mostly via a message system called SBEFIFO.
This driver provides initial emulation for the SBE runtime registers
and a very basic SBEFIFO implementation that provides the timer
command. This covers the basic SBE behaviour expected by skiboot when
booting.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
v2: use trace events instead of open coded debug print macros
hw/ppc/meson.build | 1 +
hw/ppc/pnv.c | 25 +++
hw/ppc/pnv_sbe.c | 413 +++++++++++++++++++++++++++++++++++++
hw/ppc/pnv_xscom.c | 3 +
hw/ppc/trace-events | 11 +
include/hw/ppc/pnv.h | 3 +
include/hw/ppc/pnv_sbe.h | 55 +++++
include/hw/ppc/pnv_xscom.h | 12 ++
8 files changed, 523 insertions(+)
create mode 100644 hw/ppc/pnv_sbe.c
create mode 100644 include/hw/ppc/pnv_sbe.h
diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build
index aa4c8e6a2e..62801923f3 100644
--- a/hw/ppc/meson.build
+++ b/hw/ppc/meson.build
@@ -46,6 +46,7 @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files(
'pnv_lpc.c',
'pnv_psi.c',
'pnv_occ.c',
+ 'pnv_sbe.c',
'pnv_bmc.c',
'pnv_homer.c',
'pnv_pnor.c',
diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index d3f77c8367..7ff1f464d3 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -1397,6 +1397,8 @@ static void pnv_chip_power9_instance_init(Object *obj)
object_initialize_child(obj, "occ", &chip9->occ, TYPE_PNV9_OCC);
+ object_initialize_child(obj, "sbe", &chip9->sbe, TYPE_PNV9_SBE);
+
object_initialize_child(obj, "homer", &chip9->homer, TYPE_PNV9_HOMER);
/* Number of PECs is the chip default */
@@ -1549,6 +1551,17 @@ static void pnv_chip_power9_realize(DeviceState *dev, Error **errp)
memory_region_add_subregion(get_system_memory(), PNV9_OCC_SENSOR_BASE(chip),
&chip9->occ.sram_regs);
+ /* SBE */
+ if (!qdev_realize(DEVICE(&chip9->sbe), NULL, errp)) {
+ return;
+ }
+ pnv_xscom_add_subregion(chip, PNV9_XSCOM_SBE_CTRL_BASE,
+ &chip9->sbe.xscom_ctrl_regs);
+ pnv_xscom_add_subregion(chip, PNV9_XSCOM_SBE_MBOX_BASE,
+ &chip9->sbe.xscom_mbox_regs);
+ qdev_connect_gpio_out(DEVICE(&chip9->sbe), 0, qdev_get_gpio_in(
+ DEVICE(&chip9->psi), PSIHB9_IRQ_PSU));
+
/* HOMER */
object_property_set_link(OBJECT(&chip9->homer), "chip", OBJECT(chip),
&error_abort);
@@ -1613,6 +1626,7 @@ static void pnv_chip_power10_instance_init(Object *obj)
object_initialize_child(obj, "psi", &chip10->psi, TYPE_PNV10_PSI);
object_initialize_child(obj, "lpc", &chip10->lpc, TYPE_PNV10_LPC);
object_initialize_child(obj, "occ", &chip10->occ, TYPE_PNV10_OCC);
+ object_initialize_child(obj, "sbe", &chip10->sbe, TYPE_PNV10_SBE);
object_initialize_child(obj, "homer", &chip10->homer, TYPE_PNV10_HOMER);
chip->num_pecs = pcc->num_pecs;
@@ -1754,6 +1768,17 @@ static void pnv_chip_power10_realize(DeviceState *dev, Error **errp)
PNV10_OCC_SENSOR_BASE(chip),
&chip10->occ.sram_regs);
+ /* SBE */
+ if (!qdev_realize(DEVICE(&chip10->sbe), NULL, errp)) {
+ return;
+ }
+ pnv_xscom_add_subregion(chip, PNV10_XSCOM_SBE_CTRL_BASE,
+ &chip10->sbe.xscom_ctrl_regs);
+ pnv_xscom_add_subregion(chip, PNV10_XSCOM_SBE_MBOX_BASE,
+ &chip10->sbe.xscom_mbox_regs);
+ qdev_connect_gpio_out(DEVICE(&chip10->sbe), 0, qdev_get_gpio_in(
+ DEVICE(&chip10->psi), PSIHB9_IRQ_PSU));
+
/* HOMER */
object_property_set_link(OBJECT(&chip10->homer), "chip", OBJECT(chip),
&error_abort);
diff --git a/hw/ppc/pnv_sbe.c b/hw/ppc/pnv_sbe.c
new file mode 100644
index 0000000000..41420c47bd
--- /dev/null
+++ b/hw/ppc/pnv_sbe.c
@@ -0,0 +1,413 @@
+/*
+ * QEMU PowerPC PowerNV Emulation of some SBE behaviour
+ *
+ * Copyright (c) 2022, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "target/ppc/cpu.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ppc/pnv_sbe.h"
+#include "trace.h"
+
+/*
+ * Most register and command definitions come from skiboot.
+ *
+ * xscom addresses are adjusted to be relative to xscom subregion bases
+ */
+
+/*
+ * SBE MBOX register address
+ * Reg 0 - 3 : Host to send command packets to SBE
+ * Reg 4 - 7 : SBE to send response packets to Host
+ */
+#define PSU_HOST_SBE_MBOX_REG0 0x00000000
+#define PSU_HOST_SBE_MBOX_REG1 0x00000001
+#define PSU_HOST_SBE_MBOX_REG2 0x00000002
+#define PSU_HOST_SBE_MBOX_REG3 0x00000003
+#define PSU_HOST_SBE_MBOX_REG4 0x00000004
+#define PSU_HOST_SBE_MBOX_REG5 0x00000005
+#define PSU_HOST_SBE_MBOX_REG6 0x00000006
+#define PSU_HOST_SBE_MBOX_REG7 0x00000007
+#define PSU_SBE_DOORBELL_REG_RW 0x00000010
+#define PSU_SBE_DOORBELL_REG_AND 0x00000011
+#define PSU_SBE_DOORBELL_REG_OR 0x00000012
+#define PSU_HOST_DOORBELL_REG_RW 0x00000013
+#define PSU_HOST_DOORBELL_REG_AND 0x00000014
+#define PSU_HOST_DOORBELL_REG_OR 0x00000015
+
+/*
+ * Doorbell register to trigger SBE interrupt. Set by OPAL to inform
+ * the SBE about a waiting message in the Host/SBE mailbox registers
+ */
+#define HOST_SBE_MSG_WAITING PPC_BIT(0)
+
+/*
+ * Doorbell register for host bridge interrupt. Set by the SBE to inform
+ * host about a response message in the Host/SBE mailbox registers
+ */
+#define SBE_HOST_RESPONSE_WAITING PPC_BIT(0)
+#define SBE_HOST_MSG_READ PPC_BIT(1)
+#define SBE_HOST_STOP15_EXIT PPC_BIT(2)
+#define SBE_HOST_RESET PPC_BIT(3)
+#define SBE_HOST_PASSTHROUGH PPC_BIT(4)
+#define SBE_HOST_TIMER_EXPIRY PPC_BIT(14)
+#define SBE_HOST_RESPONSE_MASK (PPC_BITMASK(0, 4) | SBE_HOST_TIMER_EXPIRY)
+
+/* SBE Control Register */
+#define SBE_CONTROL_REG_RW 0x00000000
+
+/* SBE interrupt s0/s1 bits */
+#define SBE_CONTROL_REG_S0 PPC_BIT(14)
+#define SBE_CONTROL_REG_S1 PPC_BIT(15)
+
+struct sbe_msg {
+ uint64_t reg[4];
+};
+
+static uint64_t pnv_sbe_power9_xscom_ctrl_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ uint32_t offset = addr >> 3;
+ uint64_t val = 0;
+
+ switch (offset) {
+ default:
+ qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+ HWADDR_PRIx "\n", addr >> 3);
+ }
+
+ trace_pnv_sbe_xscom_ctrl_read(addr, val);
+
+ return val;
+}
+
+static void pnv_sbe_power9_xscom_ctrl_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ uint32_t offset = addr >> 3;
+
+ trace_pnv_sbe_xscom_ctrl_write(addr, val);
+
+ switch (offset) {
+ default:
+ qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+ HWADDR_PRIx "\n", addr >> 3);
+ }
+}
+
+static const MemoryRegionOps pnv_sbe_power9_xscom_ctrl_ops = {
+ .read = pnv_sbe_power9_xscom_ctrl_read,
+ .write = pnv_sbe_power9_xscom_ctrl_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void pnv_sbe_set_host_doorbell(PnvSBE *sbe, uint64_t val)
+{
+ val &= SBE_HOST_RESPONSE_MASK; /* Is this right? What does HW do? */
+ sbe->host_doorbell = val;
+
+ trace_pnv_sbe_reg_set_host_doorbell(val);
+ qemu_set_irq(sbe->psi_irq, !!val);
+}
+
+/* SBE Target Type */
+#define SBE_TARGET_TYPE_PROC 0x00
+#define SBE_TARGET_TYPE_EX 0x01
+#define SBE_TARGET_TYPE_PERV 0x02
+#define SBE_TARGET_TYPE_MCS 0x03
+#define SBE_TARGET_TYPE_EQ 0x04
+#define SBE_TARGET_TYPE_CORE 0x05
+
+/* SBE MBOX command class */
+#define SBE_MCLASS_FIRST 0xD1
+#define SBE_MCLASS_CORE_STATE 0xD1
+#define SBE_MCLASS_SCOM 0xD2
+#define SBE_MCLASS_RING 0xD3
+#define SBE_MCLASS_TIMER 0xD4
+#define SBE_MCLASS_MPIPL 0xD5
+#define SBE_MCLASS_SECURITY 0xD6
+#define SBE_MCLASS_GENERIC 0xD7
+#define SBE_MCLASS_LAST 0xD7
+
+/*
+ * Commands are provided in xxyy form where:
+ * - xx : command class
+ * - yy : command
+ *
+ * Both request and response message uses same seq ID,
+ * command class and command.
+ */
+#define SBE_CMD_CTRL_DEADMAN_LOOP 0xD101
+#define SBE_CMD_MULTI_SCOM 0xD201
+#define SBE_CMD_PUT_RING_FORM_IMAGE 0xD301
+#define SBE_CMD_CONTROL_TIMER 0xD401
+#define SBE_CMD_GET_ARCHITECTED_REG 0xD501
+#define SBE_CMD_CLR_ARCHITECTED_REG 0xD502
+#define SBE_CMD_SET_UNSEC_MEM_WINDOW 0xD601
+#define SBE_CMD_GET_SBE_FFDC 0xD701
+#define SBE_CMD_GET_CAPABILITY 0xD702
+#define SBE_CMD_READ_SBE_SEEPROM 0xD703
+#define SBE_CMD_SET_FFDC_ADDR 0xD704
+#define SBE_CMD_QUIESCE_SBE 0xD705
+#define SBE_CMD_SET_FABRIC_ID_MAP 0xD706
+#define SBE_CMD_STASH_MPIPL_CONFIG 0xD707
+
+/* SBE MBOX control flags */
+
+/* Generic flags */
+#define SBE_CMD_CTRL_RESP_REQ 0x0100
+#define SBE_CMD_CTRL_ACK_REQ 0x0200
+
+/* Deadman loop */
+#define CTRL_DEADMAN_LOOP_START 0x0001
+#define CTRL_DEADMAN_LOOP_STOP 0x0002
+
+/* Control timer */
+#define CONTROL_TIMER_START 0x0001
+#define CONTROL_TIMER_STOP 0x0002
+
+/* Stash MPIPL config */
+#define SBE_STASH_KEY_SKIBOOT_BASE 0x03
+
+static void sbe_timer(void *opaque)
+{
+ PnvSBE *sbe = opaque;
+
+ trace_pnv_sbe_cmd_timer_expired();
+
+ pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | SBE_HOST_TIMER_EXPIRY);
+}
+
+static void do_sbe_msg(PnvSBE *sbe)
+{
+ struct sbe_msg msg;
+ uint16_t cmd, ctrl_flags, seq_id;
+ int i;
+
+ memset(&msg, 0, sizeof(msg));
+
+ for (i = 0; i < 4; i++) {
+ msg.reg[i] = sbe->mbox[i];
+ }
+
+ cmd = msg.reg[0];
+ seq_id = msg.reg[0] >> 16;
+ ctrl_flags = msg.reg[0] >> 32;
+
+ trace_pnv_sbe_msg_recv(cmd, seq_id, ctrl_flags);
+
+ if (ctrl_flags & SBE_CMD_CTRL_ACK_REQ) {
+ pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | SBE_HOST_MSG_READ);
+ }
+
+ switch (cmd) {
+ case SBE_CMD_CONTROL_TIMER:
+ if (ctrl_flags & CONTROL_TIMER_START) {
+ uint64_t us = msg.reg[1];
+ trace_pnv_sbe_cmd_timer_start(us);
+ timer_mod(sbe->timer, qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + us);
+ }
+ if (ctrl_flags & CONTROL_TIMER_STOP) {
+ trace_pnv_sbe_cmd_timer_stop();
+ timer_del(sbe->timer);
+ }
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "SBE Unimplemented command: 0x%x\n", cmd);
+ }
+}
+
+static void pnv_sbe_set_sbe_doorbell(PnvSBE *sbe, uint64_t val)
+{
+ val &= HOST_SBE_MSG_WAITING;
+ sbe->sbe_doorbell = val;
+
+ if (val & HOST_SBE_MSG_WAITING) {
+ sbe->sbe_doorbell &= ~HOST_SBE_MSG_WAITING;
+ do_sbe_msg(sbe);
+ }
+}
+
+static uint64_t pnv_sbe_power9_xscom_mbox_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ PnvSBE *sbe = PNV_SBE(opaque);
+ uint32_t offset = addr >> 3;
+ uint64_t val = 0;
+
+ if (offset <= PSU_HOST_SBE_MBOX_REG7) {
+ uint32_t idx = offset - PSU_HOST_SBE_MBOX_REG0;
+ val = sbe->mbox[idx];
+ } else {
+ switch (offset) {
+ case PSU_SBE_DOORBELL_REG_RW:
+ val = sbe->sbe_doorbell;
+ break;
+ case PSU_HOST_DOORBELL_REG_RW:
+ val = sbe->host_doorbell;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+ HWADDR_PRIx "\n", addr >> 3);
+ }
+ }
+
+ trace_pnv_sbe_xscom_mbox_read(addr, val);
+
+ return val;
+}
+
+static void pnv_sbe_power9_xscom_mbox_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
+{
+ PnvSBE *sbe = PNV_SBE(opaque);
+ uint32_t offset = addr >> 3;
+
+ trace_pnv_sbe_xscom_mbox_write(addr, val);
+
+ if (offset <= PSU_HOST_SBE_MBOX_REG7) {
+ uint32_t idx = offset - PSU_HOST_SBE_MBOX_REG0;
+ sbe->mbox[idx] = val;
+ } else {
+ switch (offset) {
+ case PSU_SBE_DOORBELL_REG_RW:
+ pnv_sbe_set_sbe_doorbell(sbe, val);
+ break;
+ case PSU_SBE_DOORBELL_REG_AND:
+ pnv_sbe_set_sbe_doorbell(sbe, sbe->sbe_doorbell & val);
+ break;
+ case PSU_SBE_DOORBELL_REG_OR:
+ pnv_sbe_set_sbe_doorbell(sbe, sbe->sbe_doorbell | val);
+ break;
+
+ case PSU_HOST_DOORBELL_REG_RW:
+ pnv_sbe_set_host_doorbell(sbe, val);
+ break;
+ case PSU_HOST_DOORBELL_REG_AND:
+ pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell & val);
+ break;
+ case PSU_HOST_DOORBELL_REG_OR:
+ pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | val);
+ break;
+
+ default:
+ qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+ HWADDR_PRIx "\n", addr >> 3);
+ }
+ }
+}
+
+static const MemoryRegionOps pnv_sbe_power9_xscom_mbox_ops = {
+ .read = pnv_sbe_power9_xscom_mbox_read,
+ .write = pnv_sbe_power9_xscom_mbox_write,
+ .valid.min_access_size = 8,
+ .valid.max_access_size = 8,
+ .impl.min_access_size = 8,
+ .impl.max_access_size = 8,
+ .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void pnv_sbe_power9_class_init(ObjectClass *klass, void *data)
+{
+ PnvSBEClass *psc = PNV_SBE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "PowerNV SBE Controller (POWER9)";
+ psc->xscom_ctrl_size = PNV9_XSCOM_SBE_CTRL_SIZE;
+ psc->xscom_ctrl_ops = &pnv_sbe_power9_xscom_ctrl_ops;
+ psc->xscom_mbox_size = PNV9_XSCOM_SBE_MBOX_SIZE;
+ psc->xscom_mbox_ops = &pnv_sbe_power9_xscom_mbox_ops;
+}
+
+static const TypeInfo pnv_sbe_power9_type_info = {
+ .name = TYPE_PNV9_SBE,
+ .parent = TYPE_PNV_SBE,
+ .instance_size = sizeof(PnvSBE),
+ .class_init = pnv_sbe_power9_class_init,
+};
+
+static void pnv_sbe_power10_class_init(ObjectClass *klass, void *data)
+{
+ PnvSBEClass *psc = PNV_SBE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "PowerNV SBE Controller (POWER10)";
+ psc->xscom_ctrl_size = PNV10_XSCOM_SBE_CTRL_SIZE;
+ psc->xscom_ctrl_ops = &pnv_sbe_power9_xscom_ctrl_ops;
+ psc->xscom_mbox_size = PNV10_XSCOM_SBE_MBOX_SIZE;
+ psc->xscom_mbox_ops = &pnv_sbe_power9_xscom_mbox_ops;
+}
+
+static const TypeInfo pnv_sbe_power10_type_info = {
+ .name = TYPE_PNV10_SBE,
+ .parent = TYPE_PNV9_SBE,
+ .class_init = pnv_sbe_power10_class_init,
+};
+
+static void pnv_sbe_realize(DeviceState *dev, Error **errp)
+{
+ PnvSBE *sbe = PNV_SBE(dev);
+ PnvSBEClass *psc = PNV_SBE_GET_CLASS(sbe);
+
+ /* XScom regions for SBE registers */
+ pnv_xscom_region_init(&sbe->xscom_ctrl_regs, OBJECT(dev),
+ psc->xscom_ctrl_ops, sbe, "xscom-sbe-ctrl",
+ psc->xscom_ctrl_size);
+ pnv_xscom_region_init(&sbe->xscom_mbox_regs, OBJECT(dev),
+ psc->xscom_mbox_ops, sbe, "xscom-sbe-mbox",
+ psc->xscom_mbox_size);
+
+ qdev_init_gpio_out(DEVICE(dev), &sbe->psi_irq, 1);
+
+ sbe->timer = timer_new_us(QEMU_CLOCK_VIRTUAL, sbe_timer, sbe);
+}
+
+static void pnv_sbe_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = pnv_sbe_realize;
+ dc->desc = "PowerNV SBE Controller";
+ dc->user_creatable = false;
+}
+
+static const TypeInfo pnv_sbe_type_info = {
+ .name = TYPE_PNV_SBE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(PnvSBE),
+ .class_init = pnv_sbe_class_init,
+ .class_size = sizeof(PnvSBEClass),
+ .abstract = true,
+};
+
+static void pnv_sbe_register_types(void)
+{
+ type_register_static(&pnv_sbe_type_info);
+ type_register_static(&pnv_sbe_power9_type_info);
+ type_register_static(&pnv_sbe_power10_type_info);
+}
+
+type_init(pnv_sbe_register_types);
diff --git a/hw/ppc/pnv_xscom.c b/hw/ppc/pnv_xscom.c
index 9ce018dbc2..79f10de57f 100644
--- a/hw/ppc/pnv_xscom.c
+++ b/hw/ppc/pnv_xscom.c
@@ -295,6 +295,9 @@ int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
_FDT((fdt_setprop(fdt, xscom_offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop(fdt, xscom_offset, "compatible", compat, compat_size)));
_FDT((fdt_setprop(fdt, xscom_offset, "scom-controller", NULL, 0)));
+ if (chip->chip_id == 0) {
+ _FDT((fdt_setprop(fdt, xscom_offset, "primary", NULL, 0)));
+ }
args.fdt = fdt;
args.xscom_offset = xscom_offset;
diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
index 5c0a215cad..f6990439d1 100644
--- a/hw/ppc/trace-events
+++ b/hw/ppc/trace-events
@@ -95,6 +95,17 @@ vof_write(uint32_t ih, unsigned cb, const char *msg) "ih=0x%x [%u] \"%s\""
vof_avail(uint64_t start, uint64_t end, uint64_t size) "0x%"PRIx64"..0x%"PRIx64" size=0x%"PRIx64
vof_claimed(uint64_t start, uint64_t end, uint64_t size) "0x%"PRIx64"..0x%"PRIx64" size=0x%"PRIx64
+# pnv_sbe.c
+pnv_sbe_xscom_ctrl_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_sbe_xscom_ctrl_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_sbe_xscom_mbox_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_sbe_xscom_mbox_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 0x%" PRIx64
+pnv_sbe_reg_set_host_doorbell(uint64_t val) "val 0x%" PRIx64
+pnv_sbe_cmd_timer_start(uint64_t ns) "ns 0x%" PRIu64
+pnv_sbe_cmd_timer_stop(void) ""
+pnv_sbe_cmd_timer_expired(void) ""
+pnv_sbe_msg_recv(uint16_t cmd, uint16_t seq, uint16_t ctrl_flags) "cmd 0x%" PRIx16 " seq %"PRIu16 " ctrl_flags 0x%" PRIx16
+
# ppc.c
ppc_tb_adjust(uint64_t offs1, uint64_t offs2, int64_t diff, int64_t seconds) "adjusted from 0x%"PRIx64" to 0x%"PRIx64", diff %"PRId64" (%"PRId64"s)"
ppc_tb_load(uint64_t tb) "tb 0x%016" PRIx64
diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
index b991194223..37c303bf36 100644
--- a/include/hw/ppc/pnv.h
+++ b/include/hw/ppc/pnv.h
@@ -27,6 +27,7 @@
#include "hw/ppc/pnv_pnor.h"
#include "hw/ppc/pnv_psi.h"
#include "hw/ppc/pnv_occ.h"
+#include "hw/ppc/pnv_sbe.h"
#include "hw/ppc/pnv_homer.h"
#include "hw/ppc/pnv_xive.h"
#include "hw/ppc/pnv_core.h"
@@ -100,6 +101,7 @@ struct Pnv9Chip {
Pnv9Psi psi;
PnvLpcController lpc;
PnvOCC occ;
+ PnvSBE sbe;
PnvHomer homer;
uint32_t nr_quads;
@@ -129,6 +131,7 @@ struct Pnv10Chip {
Pnv9Psi psi;
PnvLpcController lpc;
PnvOCC occ;
+ PnvSBE sbe;
PnvHomer homer;
uint32_t nr_quads;
diff --git a/include/hw/ppc/pnv_sbe.h b/include/hw/ppc/pnv_sbe.h
new file mode 100644
index 0000000000..f54a3ae9ba
--- /dev/null
+++ b/include/hw/ppc/pnv_sbe.h
@@ -0,0 +1,55 @@
+/*
+ * QEMU PowerPC PowerNV Emulation of some SBE behaviour
+ *
+ * Copyright (c) 2022, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef PPC_PNV_SBE_H
+#define PPC_PNV_SBE_H
+
+#include "qom/object.h"
+
+#define TYPE_PNV_SBE "pnv-sbe"
+OBJECT_DECLARE_TYPE(PnvSBE, PnvSBEClass, PNV_SBE)
+#define TYPE_PNV9_SBE TYPE_PNV_SBE "-POWER9"
+DECLARE_INSTANCE_CHECKER(PnvSBE, PNV9_SBE, TYPE_PNV9_SBE)
+#define TYPE_PNV10_SBE TYPE_PNV_SBE "-POWER10"
+DECLARE_INSTANCE_CHECKER(PnvSBE, PNV10_SBE, TYPE_PNV10_SBE)
+
+struct PnvSBE {
+ DeviceState xd;
+
+ uint64_t mbox[8];
+ uint64_t sbe_doorbell;
+ uint64_t host_doorbell;
+
+ qemu_irq psi_irq;
+ QEMUTimer *timer;
+
+ MemoryRegion xscom_mbox_regs;
+ MemoryRegion xscom_ctrl_regs;
+};
+
+struct PnvSBEClass {
+ DeviceClass parent_class;
+
+ int xscom_ctrl_size;
+ int xscom_mbox_size;
+ const MemoryRegionOps *xscom_ctrl_ops;
+ const MemoryRegionOps *xscom_mbox_ops;
+};
+
+#endif /* PPC_PNV_SBE_H */
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
index 7c7440de0c..c6e9ef8dd2 100644
--- a/include/hw/ppc/pnv_xscom.h
+++ b/include/hw/ppc/pnv_xscom.h
@@ -92,6 +92,12 @@ struct PnvXScomInterfaceClass {
#define PNV9_XSCOM_OCC_BASE PNV_XSCOM_OCC_BASE
#define PNV9_XSCOM_OCC_SIZE 0x8000
+#define PNV9_XSCOM_SBE_CTRL_BASE 0x00050008
+#define PNV9_XSCOM_SBE_CTRL_SIZE 0x1
+
+#define PNV9_XSCOM_SBE_MBOX_BASE 0x000D0050
+#define PNV9_XSCOM_SBE_MBOX_SIZE 0x16
+
#define PNV9_XSCOM_PBA_BASE 0x5012b00
#define PNV9_XSCOM_PBA_SIZE 0x40
@@ -134,6 +140,12 @@ struct PnvXScomInterfaceClass {
#define PNV10_XSCOM_OCC_BASE PNV9_XSCOM_OCC_BASE
#define PNV10_XSCOM_OCC_SIZE PNV9_XSCOM_OCC_SIZE
+#define PNV10_XSCOM_SBE_CTRL_BASE PNV9_XSCOM_SBE_CTRL_BASE
+#define PNV10_XSCOM_SBE_CTRL_SIZE PNV9_XSCOM_SBE_CTRL_SIZE
+
+#define PNV10_XSCOM_SBE_MBOX_BASE PNV9_XSCOM_SBE_MBOX_BASE
+#define PNV10_XSCOM_SBE_MBOX_SIZE PNV9_XSCOM_SBE_MBOX_SIZE
+
#define PNV10_XSCOM_PBA_BASE 0x01010CDA
#define PNV10_XSCOM_PBA_SIZE 0x40
--
2.35.1
next reply other threads:[~2022-08-11 9:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-11 9:37 Nicholas Piggin [this message]
2022-08-16 11:32 ` [PATCH v2] ppc/pnv: Add initial P9/10 SBE model Daniel Henrique Barboza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220811093726.1442343-1-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.