From: Vishal Verma <vishal.l.verma@intel.com>
To: Dan Williams <dan.j.williams@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Dave Jiang <dave.jiang@intel.com>
Cc: linux-kernel@vger.kernel.org, nvdimm@lists.linux.dev,
linux-cxl@vger.kernel.org, David Hildenbrand <david@redhat.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Huang Ying <ying.huang@intel.com>,
Li Zhijian <lizhijian@fujitsu.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v3 2/2] dax: add a sysfs knob to control memmap_on_memory behavior
Date: Mon, 11 Dec 2023 15:52:18 -0700 [thread overview]
Message-ID: <20231211-vv-dax_abi-v3-2-acf6cc1bde9f@intel.com> (raw)
In-Reply-To: <20231211-vv-dax_abi-v3-0-acf6cc1bde9f@intel.com>
Add a sysfs knob for dax devices to control the memmap_on_memory setting
if the dax device were to be hotplugged as system memory.
The default memmap_on_memory setting for dax devices originating via
pmem or hmem is set to 'false' - i.e. no memmap_on_memory semantics, to
preserve legacy behavior. For dax devices via CXL, the default is on.
The sysfs control allows the administrator to override the above
defaults if needed.
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
---
drivers/dax/bus.c | 47 +++++++++++++++++++++++++++++++++
Documentation/ABI/testing/sysfs-bus-dax | 17 ++++++++++++
2 files changed, 64 insertions(+)
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c
index 1ff1ab5fa105..2871e5188f0d 100644
--- a/drivers/dax/bus.c
+++ b/drivers/dax/bus.c
@@ -1270,6 +1270,52 @@ static ssize_t numa_node_show(struct device *dev,
}
static DEVICE_ATTR_RO(numa_node);
+static ssize_t memmap_on_memory_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_dax *dev_dax = to_dev_dax(dev);
+
+ return sprintf(buf, "%d\n", dev_dax->memmap_on_memory);
+}
+
+static ssize_t memmap_on_memory_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct device_driver *drv = dev->driver;
+ struct dev_dax *dev_dax = to_dev_dax(dev);
+ struct dax_region *dax_region = dev_dax->region;
+ struct dax_device_driver *dax_drv = to_dax_drv(drv);
+ ssize_t rc;
+ bool val;
+
+ rc = kstrtobool(buf, &val);
+ if (rc)
+ return rc;
+
+ if (dev_dax->memmap_on_memory == val)
+ return len;
+
+ device_lock(dax_region->dev);
+ if (!dax_region->dev->driver) {
+ device_unlock(dax_region->dev);
+ return -ENXIO;
+ }
+
+ if (dax_drv->type == DAXDRV_KMEM_TYPE) {
+ device_unlock(dax_region->dev);
+ return -EBUSY;
+ }
+
+ device_lock(dev);
+ dev_dax->memmap_on_memory = val;
+ device_unlock(dev);
+
+ device_unlock(dax_region->dev);
+ return len;
+}
+static DEVICE_ATTR_RW(memmap_on_memory);
+
static umode_t dev_dax_visible(struct kobject *kobj, struct attribute *a, int n)
{
struct device *dev = container_of(kobj, struct device, kobj);
@@ -1296,6 +1342,7 @@ static struct attribute *dev_dax_attributes[] = {
&dev_attr_align.attr,
&dev_attr_resource.attr,
&dev_attr_numa_node.attr,
+ &dev_attr_memmap_on_memory.attr,
NULL,
};
diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax
index a61a7b186017..b1fd8bf8a7de 100644
--- a/Documentation/ABI/testing/sysfs-bus-dax
+++ b/Documentation/ABI/testing/sysfs-bus-dax
@@ -149,3 +149,20 @@ KernelVersion: v5.1
Contact: nvdimm@lists.linux.dev
Description:
(RO) The id attribute indicates the region id of a dax region.
+
+What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory
+Date: October, 2023
+KernelVersion: v6.8
+Contact: nvdimm@lists.linux.dev
+Description:
+ (RW) Control the memmap_on_memory setting if the dax device
+ were to be hotplugged as system memory. This determines whether
+ the 'altmap' for the hotplugged memory will be placed on the
+ device being hotplugged (memmap_on_memory=1) or if it will be
+ placed on regular memory (memmap_on_memory=0). This attribute
+ must be set before the device is handed over to the 'kmem'
+ driver (i.e. hotplugged into system-ram). Additionally, this
+ depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled
+ memmap_on_memory parameter for memory_hotplug. This is
+ typically set on the kernel command line -
+ memory_hotplug.memmap_on_memory set to 'true' or 'force'."
--
2.41.0
next prev parent reply other threads:[~2023-12-11 22:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 22:52 [PATCH v3 0/2] Add DAX ABI for memmap_on_memory Vishal Verma
2023-12-11 22:52 ` [PATCH v3 1/2] Documentatiion/ABI: Add ABI documentation for sys-bus-dax Vishal Verma
2023-12-11 22:52 ` Vishal Verma [this message]
2023-12-12 0:30 ` [PATCH v3 2/2] dax: add a sysfs knob to control memmap_on_memory behavior Huang, Ying
2023-12-12 0:40 ` Verma, Vishal L
2023-12-12 0:56 ` Huang, Ying
2023-12-12 1:02 ` Verma, Vishal L
2023-12-12 1:00 ` Dan Williams
2023-12-12 10:05 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231211-vv-dax_abi-v3-2-acf6cc1bde9f@intel.com \
--to=vishal.l.verma@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=dave.jiang@intel.com \
--cc=david@redhat.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizhijian@fujitsu.com \
--cc=nvdimm@lists.linux.dev \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.