From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Venkateswara Naralasetty <quic_vnaralas@quicinc.com>,
kernel test robot <lkp@intel.com>,
"Tamizh Chelvam Raja" <quic_tamizhr@quicinc.com>
Subject: [PATCHv3] wifi: ath11k: skip status ring entry processing
Date: Sat, 27 Apr 2024 14:42:48 +0530 [thread overview]
Message-ID: <20240427091248.2013946-1-quic_tamizhr@quicinc.com> (raw)
From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
If STATUS_BUFFER_DONE is not set for a monitor status ring entry,
we don't process the status ring until STATUS_BUFFER_DONE set
for that status ring entry.
During LMAC reset it may happen that hardware will not write
STATUS_BUFFER_DONE tlv in status buffer, in that case we end up
waiting for STATUS_BUFFER_DONE leading to backpressure on monitor
status ring.
To fix the issue, when HP(Head Pointer) + 1 entry is peeked and if DMA
is not done and if HP + 2 entry's DMA done is set,
replenish HP + 1 entry and start processing in next interrupt.
If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA
done to be set.
Also, during monitor attach HP points to the end of the ring and
TP(Tail Pointer) points to the start of the ring.
Using ath11k_hal_srng_src_peek() may result in processing invalid buffer
for the very first interrupt. Since, HW starts writing buffer from TP.
To avoid this issue call ath11k_hal_srng_src_next_peek() instead of
calling ath11k_hal_srng_src_peek().
Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202303281719.CvnPkOiK-lkp@intel.com/
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
---
v3:
* Rebased on top of ToT
v2:
* Fixed compilation warning Reported-by: kernel test robot <lkp@intel.com>
drivers/net/wireless/ath/ath11k/dp_rx.c | 88 ++++++++++++++++++++++---
drivers/net/wireless/ath/ath11k/hal.c | 14 ++++
drivers/net/wireless/ath/ath11k/hal.h | 2 +
3 files changed, 94 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index afd481f5858f..79b7f4996f5d 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2990,11 +2990,52 @@ ath11k_dp_rx_mon_update_status_buf_state(struct ath11k_mon_data *pmon,
}
}
+static enum dp_mon_status_buf_state
+ath11k_dp_rx_mon_handle_status_buf_done(struct ath11k_base *ab, struct hal_srng *srng,
+ struct dp_rxdma_ring *rx_ring)
+{
+ struct ath11k_skb_rxcb *rxcb;
+ struct hal_tlv_hdr *tlv;
+ struct sk_buff *skb;
+ void *status_desc;
+ dma_addr_t paddr;
+ u32 cookie;
+ int buf_id;
+ u8 rbm;
+
+ status_desc = ath11k_hal_srng_src_next_peek(ab, srng);
+ if (!status_desc)
+ return DP_MON_STATUS_NO_DMA;
+
+ ath11k_hal_rx_buf_addr_info_get(status_desc, &paddr, &cookie, &rbm);
+
+ buf_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_BUF_ID, cookie);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ skb = idr_find(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ if (!skb)
+ return DP_MON_STATUS_NO_DMA;
+
+ rxcb = ATH11K_SKB_RXCB(skb);
+ dma_sync_single_for_cpu(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ tlv = (struct hal_tlv_hdr *)skb->data;
+ if (FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl) != HAL_RX_STATUS_BUFFER_DONE)
+ return DP_MON_STATUS_NO_DMA;
+
+ return DP_MON_STATUS_REPLINISH;
+}
+
static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
int *budget, struct sk_buff_head *skb_list)
{
struct ath11k *ar;
const struct ath11k_hw_hal_params *hal_params;
+ enum dp_mon_status_buf_state reap_status;
struct ath11k_pdev_dp *dp;
struct dp_rxdma_ring *rx_ring;
struct ath11k_mon_data *pmon;
@@ -3022,8 +3063,7 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
ath11k_hal_srng_access_begin(ab, srng);
while (*budget) {
*budget -= 1;
- rx_mon_status_desc =
- ath11k_hal_srng_src_peek(ab, srng);
+ rx_mon_status_desc = ath11k_hal_srng_src_peek(ab, srng);
if (!rx_mon_status_desc) {
pmon->buf_state = DP_MON_STATUS_REPLINISH;
break;
@@ -3057,15 +3097,43 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
FIELD_GET(HAL_TLV_HDR_TAG,
tlv->tl), buf_id);
- /* If done status is missing, hold onto status
- * ring until status is done for this status
- * ring buffer.
- * Keep HP in mon_status_ring unchanged,
- * and break from here.
- * Check status for same buffer for next time
+ /* RxDMA status done bit might not be set even
+ * though tp is moved by HW.
*/
- pmon->buf_state = DP_MON_STATUS_NO_DMA;
- break;
+
+ /* If done status is missing:
+ * 1. As per MAC team's suggestion,
+ * when HP + 1 entry is peeked and if DMA
+ * is not done and if HP + 2 entry's DMA done
+ * is set. skip HP + 1 entry and
+ * start processing in next interrupt.
+ * 2. If HP + 2 entry's DMA done is not set,
+ * poll onto HP + 1 entry DMA done to be set.
+ * Check status for same buffer for next time
+ * dp_rx_mon_status_srng_process
+ */
+
+ reap_status = ath11k_dp_rx_mon_handle_status_buf_done(ab, srng,
+ rx_ring);
+ if (reap_status == DP_MON_STATUS_NO_DMA) {
+ continue;
+ } else if (reap_status == DP_MON_STATUS_REPLINISH) {
+ ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
+ FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl),
+ buf_id);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ idr_remove(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ dma_unmap_single(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ dev_kfree_skb_any(skb);
+ pmon->buf_state = DP_MON_STATUS_REPLINISH;
+ goto move_next;
+ }
}
spin_lock_bh(&rx_ring->idr_lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index f3d04568c221..dbba45c22dc6 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -796,6 +796,20 @@ u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
return desc;
}
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab, struct hal_srng *srng)
+{
+ u32 next_hp;
+
+ lockdep_assert_held(&srng->lock);
+
+ next_hp = (srng->u.src_ring.hp + srng->entry_size) % srng->ring_size;
+
+ if (next_hp != srng->u.src_ring.cached_tp)
+ return srng->ring_base_vaddr + next_hp;
+
+ return NULL;
+}
+
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng)
{
lockdep_assert_held(&srng->lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index e453c137385e..dc8bbe073017 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -947,6 +947,8 @@ u32 *ath11k_hal_srng_dst_peek(struct ath11k_base *ab, struct hal_srng *srng);
int ath11k_hal_srng_dst_num_free(struct ath11k_base *ab, struct hal_srng *srng,
bool sync_hw_ptr);
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng);
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab,
+ struct hal_srng *srng);
u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
struct hal_srng *srng);
u32 *ath11k_hal_srng_src_reap_next(struct ath11k_base *ab,
base-commit: bf99bc7423e18aa3475ef00a7a6fb773c31ce6df
--
2.34.1
next reply other threads:[~2024-04-27 9:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-27 9:12 Tamizh Chelvam Raja [this message]
2024-04-27 22:46 ` [PATCHv3] wifi: ath11k: skip status ring entry processing Jeff Johnson
2024-04-28 12:54 ` Meiyong Yu
2024-04-28 13:02 ` Meiyong Yu
2024-04-29 7:09 ` Tamizh Chelvam Raja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240427091248.2013946-1-quic_tamizhr@quicinc.com \
--to=quic_tamizhr@quicinc.com \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lkp@intel.com \
--cc=quic_vnaralas@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.