From: Vincenzo Frascino <vincenzo.frascino@arm.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v5 6/8] arm64: dts: morello: Add support for soc dts
Date: Thu, 13 Feb 2025 18:03:07 +0000 [thread overview]
Message-ID: <20250213180309.485528-7-vincenzo.frascino@arm.com> (raw)
In-Reply-To: <20250213180309.485528-1-vincenzo.frascino@arm.com>
The Morello architecture is an experimental extension to Armv8.2-A,
which extends the AArch64 state with the principles proposed in
version 7 of the Capability Hardware Enhanced RISC Instructions
(CHERI) ISA.
Introduce Morello SoC dts.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
---
arch/arm64/boot/dts/arm/Makefile | 1 +
arch/arm64/boot/dts/arm/morello-sdp.dts | 157 ++++++++++++++++++++++++
2 files changed, 158 insertions(+)
create mode 100644 arch/arm64/boot/dts/arm/morello-sdp.dts
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index d908e96d7ddc..869667bef7c0 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += morello-sdp.dtb
diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/arm/morello-sdp.dts
new file mode 100644
index 000000000000..cee49dee7571
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021-2024, Arm Limited. All rights reserved.
+ */
+
+/dts-v1/;
+#include "morello.dtsi"
+
+/ {
+ model = "Arm Morello System Development Platform";
+ compatible = "arm,morello-sdp", "arm,morello";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ dpu_aclk: clock-350000000 {
+ /* 77.1 MHz derived from 24 MHz reference clock */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <350000000>;
+ clock-output-names = "aclk";
+ };
+
+ dpu_pixel_clk: clock-148500000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ clock-output-names = "pxclk";
+ };
+
+ i2c0: i2c@1c0f0000 {
+ compatible = "cdns,i2c-r1p14";
+ reg = <0x0 0x1c0f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dpu_aclk>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <100000>;
+
+ hdmi_tx: hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ video-ports = <0x234501>;
+ port {
+ tda998x_0_input: endpoint {
+ remote-endpoint = <&dp_pl0_out0>;
+ };
+ };
+ };
+ };
+
+ dp0: display@2cc00000 {
+ compatible = "arm,mali-d32", "arm,mali-d71";
+ reg = <0x0 0x2cc00000 0x0 0x20000>;
+ interrupts = <0 69 4>;
+ clocks = <&dpu_aclk>;
+ clock-names = "aclk";
+ iommus = <&smmu_dp 0>, <&smmu_dp 1>, <&smmu_dp 2>, <&smmu_dp 3>,
+ <&smmu_dp 8>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pl0: pipeline@0 {
+ reg = <0>;
+ clocks = <&dpu_pixel_clk>;
+ clock-names = "pxclk";
+ port {
+ dp_pl0_out0: endpoint {
+ remote-endpoint = <&tda998x_0_input>;
+ };
+ };
+ };
+ };
+
+ smmu_ccix: iommu@4f000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0x4f000000 0x0 0x40000>;
+
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ msi-parent = <&its1 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ smmu_pcie: iommu@4f400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0x4f400000 0x0 0x40000>;
+
+ interrupts = <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 237 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ msi-parent = <&its2 0>;
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ pcie_ctlr: pcie@28c0000000 {
+ device_type = "pci";
+ compatible = "pci-host-ecam-generic";
+ reg = <0x28 0xC0000000 0 0x10000000>;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x6f000000 0x00 0x00800000>,
+ <0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x0f000000>,
+ <0x42000000 0x09 0x00000000 0x09 0x00000000 0x1f 0xc0000000>;
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 172 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_pcie 0 0x10000>;
+ iommu-map = <0 &smmu_pcie 0 0x10000>;
+ };
+
+ ccix_pcie_ctlr: pcie@4fc0000000 {
+ device_type = "pci";
+ compatible = "pci-host-ecam-generic";
+ reg = <0x4f 0xC0000000 0 0x10000000>;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x7f000000 0x00 0x00800000>,
+ <0x02000000 0x00 0x70000000 0x00 0x70000000 0x00 0x0f000000>,
+ <0x42000000 0x30 0x00000000 0x30 0x00000000 0x1f 0xc0000000>;
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 201 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic 0 0 0 202 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic 0 0 0 203 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic 0 0 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ msi-map = <0 &its_ccix 0 0x10000>;
+ iommu-map = <0 &smmu_ccix 0 0x10000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.43.0
next prev parent reply other threads:[~2025-02-13 18:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 18:03 [PATCH v5 0/8] arm64: dts: Add Arm Morello support Vincenzo Frascino
2025-02-13 18:03 ` [PATCH v5 1/8] dt-bindings: arm: Add Morello compatibility Vincenzo Frascino
2025-02-14 10:38 ` Linus Walleij
2025-02-18 15:11 ` Sudeep Holla
2025-02-13 18:03 ` [PATCH v5 2/8] dt-bindings: arm: Add Morello fvp compatibility Vincenzo Frascino
2025-02-14 8:12 ` Krzysztof Kozlowski
2025-02-18 18:07 ` Vincenzo Frascino
2025-02-19 7:13 ` Krzysztof Kozlowski
2025-02-19 11:30 ` Vincenzo Frascino
2025-02-19 19:53 ` Krzysztof Kozlowski
2025-02-13 18:03 ` [PATCH v5 3/8] dt-bindings: arm: Add Rainier compatibility Vincenzo Frascino
2025-02-14 8:12 ` Krzysztof Kozlowski
2025-02-13 18:03 ` [PATCH v5 4/8] perf: arm_pmuv3: Add support for ARM Rainier PMU Vincenzo Frascino
2025-02-14 8:13 ` Krzysztof Kozlowski
2025-02-13 18:03 ` [PATCH v5 5/8] arm64: dts: morello: Add support for common functionalities Vincenzo Frascino
2025-02-13 18:03 ` Vincenzo Frascino [this message]
2025-02-13 18:03 ` [PATCH v5 7/8] arm64: dts: morello: Add support for fvp dts Vincenzo Frascino
2025-02-13 18:03 ` [PATCH v5 8/8] MAINTAINERS: Add Vincenzo Frascino as Arm Morello Maintainer Vincenzo Frascino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250213180309.485528-7-vincenzo.frascino@arm.com \
--to=vincenzo.frascino@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=liviu.dudau@arm.com \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.