From: Michael Walle <michael@walle.cc>
To: Saravana Kannan <saravanak@google.com>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
John Stultz <john.stultz@linaro.org>,
Android Kernel Team <kernel-team@android.com>,
Kevin Hilman <khilman@baylibre.com>,
LKML <linux-kernel@vger.kernel.org>,
Marc Zyngier <maz@kernel.org>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com,
Linux PCI <linux-pci@vger.kernel.org>
Subject: Re: [PATCH v1 5/5] driver core: Set fw_devlink=on by default
Date: Tue, 19 Jan 2021 11:41:04 +0100 [thread overview]
Message-ID: <4b9ae679b6f76d2f7e340e2ec229dd53@walle.cc> (raw)
In-Reply-To: <CAGETcx9=6fPAHLuMyfxfXTGxeSUO8FwHVU_F4bfqLTfK6c+eXw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3831 bytes --]
Am 2021-01-18 22:01, schrieb Saravana Kannan:
> On Sun, Jan 17, 2021 at 3:01 PM Michael Walle <michael@walle.cc> wrote:
>> > Cyclic dependencies in some firmware was one of the last remaining
>> > reasons fw_devlink=on couldn't be set by default. Now that cyclic
>> > dependencies don't block probing, set fw_devlink=on by default.
>> >
>> > Setting fw_devlink=on by default brings a bunch of benefits (currently,
>> > only for systems with device tree firmware):
>> > * Significantly cuts down deferred probes.
>> > * Device probe is effectively attempted in graph order.
>> > * Makes it much easier to load drivers as modules without having to
>> > worry about functional dependencies between modules (depmod is still
>> > needed for symbol dependencies).
>> >
>> > If this patch prevents some devices from probing, it's very likely due
>> > to the system having one or more device drivers that "probe"/set up a
>> > device (DT node with compatible property) without creating a struct
>> > device for it. If we hit such cases, the device drivers need to be
>> > fixed so that they populate struct devices and probe them like normal
>> > device drivers so that the driver core is aware of the devices and their
>> > status. See [1] for an example of such a case.
>> >
>> > [1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
>> > Signed-off-by: Saravana Kannan <saravanak@google.com>
>>
>> This breaks (at least) probing of the PCIe controllers of my board.
>> The
>> driver in question is
>> drivers/pci/controller/dwc/pci-layerscape.c
>> I've also put the maintainers of this driver on CC. Looks like it uses
>> a
>> proper struct device. But it uses builtin_platform_driver_probe() and
>> apparently it waits for the iommu which uses module_platform_driver().
>> Dunno if that will work together.
>
> Yeah, the builtin vs module doesn't matter. I've had fw_devlink work
> multiple times with the consumer driver being built in and the
> supplier actually loaded as a module. Making that work is one of the
> goals of fw_devlink.
Ok.
>> The board device tree can be found here:
>> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
>>
>> Attached is the log with enabled "probe deferral" messages enabled.
>
> I took a look at the logs. As you said, pci seems to be waiting on
> iommu, but it's not clear why the iommu didn't probe by then. Can you
> add initcall_debug=1 and enable the logs in device_link_add()? Btw, I
> realize one compromise on the logs is to send them as an attachment
> instead of inline. That way, it's still archived in the list, but I
> don't have to deal with log lines getting wrapped, etc.
>
> Thanks for reporting the issues. Also, could you try picking up all of
> these changes and giving it a shot. It's unlikely to help, but I want
> to rule out issues related to fixes in progress.
>
> https://lore.kernel.org/lkml/20210116011412.3211292-1-saravanak@google.com/
> https://lore.kernel.org/lkml/20210115210159.3090203-1-saravanak@google.com/
> https://lore.kernel.org/lkml/20201218210750.3455872-1-saravanak@google.com/
Did pick them up, the last one had a conflict due some superfluous
lines.
Maybe they got reordered in that arrray.
Issue still persist. I've enabled the debug in device_link_add(), in
device_links_check_suppliers() and booted with initcall_debug. Please
see attached log. Lets see how that goes ;)
[ 0.132687] calling ls_pcie_driver_init+0x0/0x38 @ 1
[ 0.132762] platform 3400000.pcie: probe deferral - supplier
5000000.iommu not ready
[ 0.132777] platform 3500000.pcie: probe deferral - supplier
5000000.iommu not ready
[ 0.132818] initcall ls_pcie_driver_init+0x0/0x38 returned -19 after
119 usecs
After that, ls_pcie_driver_init() is never called again.
-michael
[-- Attachment #2: boot.log --]
[-- Type: text/plain, Size: 149672 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.11.0-rc4-next-20210119-00011-g04c7947f0b7e-dirty (mwalle@mwalle01) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #359 SMP PREEMPT Tue Jan 19 09:22:23 CET 2021
[ 0.000000] Machine model: Kontron KBox A-230-LS
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x20ff7d9200-0x20ff7dafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff]
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 524288 pages, LIFO batch:63
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:63
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fcc00000
[ 0.000000] percpu: Embedded 31 pages/cpu s89752 r8192 d29032 u126976
[ 0.000000] pcpu-alloc: s89752 r8192 d29032 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: debug root=/dev/mmcblk0p2 rootwait initcall_debug
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000f8c00000-0x00000000fcc00000] (64MB)
[ 0.000000] Memory: 3987140K/4194304K available (14592K kernel code, 2024K rwdata, 5780K rodata, 4800K init, 848K bss, 174396K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 51181 entries in 200 pages
[ 0.000000] ftrace: allocated 200 pages with 3 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080180000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000002080200000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080210000
[ 0.000000] random: get_random_bytes called from start_kernel+0x668/0x830 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000093] calling con_init+0x0/0x220 @ 0
[ 0.000130] Console: colour dummy device 80x25
[ 0.000406] printk: console [tty0] enabled
[ 0.000413] initcall con_init+0x0/0x220 returned 0 after 0 usecs
[ 0.000424] calling hvc_console_init+0x0/0x34 @ 0
[ 0.000435] initcall hvc_console_init+0x0/0x34 returned 0 after 0 usecs
[ 0.000445] calling xen_cons_init+0x0/0x88 @ 0
[ 0.000459] initcall xen_cons_init+0x0/0x88 returned 0 after 0 usecs
[ 0.000470] calling univ8250_console_init+0x0/0x50 @ 0
[ 0.000482] initcall univ8250_console_init+0x0/0x50 returned 0 after 0 usecs
[ 0.000527] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.000543] pid_max: default: 32768 minimum: 301
[ 0.000590] LSM: Security Framework initializing
[ 0.000642] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000677] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001546] calling trace_init_flags_sys_enter+0x0/0x2c @ 1
[ 0.001570] initcall trace_init_flags_sys_enter+0x0/0x2c returned 0 after 0 usecs
[ 0.001584] calling trace_init_flags_sys_exit+0x0/0x2c @ 1
[ 0.001595] initcall trace_init_flags_sys_exit+0x0/0x2c returned 0 after 0 usecs
[ 0.001607] calling cpu_suspend_init+0x0/0x58 @ 1
[ 0.001619] initcall cpu_suspend_init+0x0/0x58 returned 0 after 0 usecs
[ 0.001630] calling asids_init+0x0/0xc0 @ 1
[ 0.001650] initcall asids_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.001660] calling xen_guest_init+0x0/0x348 @ 1
[ 0.001671] initcall xen_guest_init+0x0/0x348 returned 0 after 0 usecs
[ 0.001683] calling spawn_ksoftirqd+0x0/0x58 @ 1
[ 0.001742] initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 usecs
[ 0.001757] calling migration_init+0x0/0x64 @ 1
[ 0.001766] initcall migration_init+0x0/0x64 returned 0 after 0 usecs
[ 0.001776] calling srcu_bootup_announce+0x0/0x50 @ 1
[ 0.001786] rcu: Hierarchical SRCU implementation.
[ 0.001793] initcall srcu_bootup_announce+0x0/0x50 returned 0 after 0 usecs
[ 0.001804] calling rcu_spawn_core_kthreads+0x0/0xcc @ 1
[ 0.001814] initcall rcu_spawn_core_kthreads+0x0/0xcc returned 0 after 0 usecs
[ 0.001826] calling rcu_spawn_gp_kthread+0x0/0x16c @ 1
[ 0.001879] initcall rcu_spawn_gp_kthread+0x0/0x16c returned 0 after 0 usecs
[ 0.001893] calling check_cpu_stall_init+0x0/0x3c @ 1
[ 0.001904] initcall check_cpu_stall_init+0x0/0x3c returned 0 after 0 usecs
[ 0.001915] calling rcu_sysrq_init+0x0/0x48 @ 1
[ 0.001925] initcall rcu_sysrq_init+0x0/0x48 returned 0 after 0 usecs
[ 0.001935] calling cpu_stop_init+0x0/0xd8 @ 1
[ 0.001998] initcall cpu_stop_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.002012] calling init_events+0x0/0x68 @ 1
[ 0.002039] initcall init_events+0x0/0x68 returned 0 after 0 usecs
[ 0.002051] calling init_trace_printk+0x0/0x28 @ 1
[ 0.002063] initcall init_trace_printk+0x0/0x28 returned 0 after 0 usecs
[ 0.002075] calling event_trace_enable_again+0x0/0x38 @ 1
[ 0.002087] initcall event_trace_enable_again+0x0/0x38 returned 0 after 0 usecs
[ 0.002100] calling jump_label_init_module+0x0/0x2c @ 1
[ 0.002109] initcall jump_label_init_module+0x0/0x2c returned 0 after 0 usecs
[ 0.002119] calling initialize_ptr_random+0x0/0x70 @ 1
[ 0.002131] initcall initialize_ptr_random+0x0/0x70 returned 0 after 0 usecs
[ 0.002143] calling its_pmsi_init+0x0/0xb8 @ 1
[ 0.002183] Platform MSI: gic-its@6020000 domain created
[ 0.002247] initcall its_pmsi_init+0x0/0xb8 returned 0 after 0 usecs
[ 0.002259] calling its_pci_msi_init+0x0/0xd4 @ 1
[ 0.002285] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
[ 0.002326] initcall its_pci_msi_init+0x0/0xd4 returned 0 after 0 usecs
[ 0.002338] calling brcmstb_soc_device_early_init+0x0/0xb0 @ 1
[ 0.002515] initcall brcmstb_soc_device_early_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.002529] calling brcmstb_biuctrl_init+0x0/0x468 @ 1
[ 0.002570] initcall brcmstb_biuctrl_init+0x0/0x468 returned 0 after 0 usecs
[ 0.002582] calling efi_memreserve_root_init+0x0/0x48 @ 1
[ 0.002594] initcall efi_memreserve_root_init+0x0/0x48 returned 0 after 0 usecs
[ 0.002606] calling arm_enable_runtime_services+0x0/0x1e4 @ 1
[ 0.002617] EFI services will not be available.
[ 0.002624] initcall arm_enable_runtime_services+0x0/0x1e4 returned 0 after 0 usecs
[ 0.002636] calling efi_earlycon_remap_fb+0x0/0x84 @ 1
[ 0.002647] initcall efi_earlycon_remap_fb+0x0/0x84 returned 0 after 0 usecs
[ 0.002659] calling dummy_timer_register+0x0/0x44 @ 1
[ 0.002672] initcall dummy_timer_register+0x0/0x44 returned 0 after 0 usecs
[ 0.002771] smp: Bringing up secondary CPUs ...
[ 0.003048] Detected PIPT I-cache on CPU1
[ 0.003069] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000
[ 0.003079] GICv3: CPU1: using allocated LPI pending table @0x0000002080220000
[ 0.003107] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.003176] smp: Brought up 1 node, 2 CPUs
[ 0.003204] SMP: Total of 2 processors activated.
[ 0.003212] CPU features: detected: 32-bit EL0 Support
[ 0.003221] CPU features: detected: CRC32 instructions
[ 0.003230] CPU features: detected: 32-bit EL1 Support
[ 0.012372] CPU: All CPU(s) started at EL2
[ 0.012398] alternatives: patching kernel code
[ 0.013127] devtmpfs: initialized
[ 0.015219] calling bpf_jit_charge_init+0x0/0x4c @ 1
[ 0.015251] initcall bpf_jit_charge_init+0x0/0x4c returned 0 after 0 usecs
[ 0.015265] calling ipc_ns_init+0x0/0x4c @ 1
[ 0.015280] initcall ipc_ns_init+0x0/0x4c returned 0 after 0 usecs
[ 0.015291] calling init_mmap_min_addr+0x0/0x28 @ 1
[ 0.015301] initcall init_mmap_min_addr+0x0/0x28 returned 0 after 0 usecs
[ 0.015311] calling pci_realloc_setup_params+0x0/0x54 @ 1
[ 0.015324] initcall pci_realloc_setup_params+0x0/0x54 returned 0 after 0 usecs
[ 0.015337] calling net_ns_init+0x0/0x164 @ 1
[ 0.015501] initcall net_ns_init+0x0/0x164 returned 0 after 0 usecs
[ 0.015517] calling inet_frag_wq_init+0x0/0x5c @ 1
[ 0.015587] initcall inet_frag_wq_init+0x0/0x5c returned 0 after 0 usecs
[ 0.015639] calling fpsimd_init+0x0/0xd4 @ 1
[ 0.015652] initcall fpsimd_init+0x0/0xd4 returned 0 after 0 usecs
[ 0.015663] calling tagged_addr_init+0x0/0x40 @ 1
[ 0.015679] initcall tagged_addr_init+0x0/0x40 returned 0 after 0 usecs
[ 0.015690] calling enable_mrs_emulation+0x0/0x34 @ 1
[ 0.015701] initcall enable_mrs_emulation+0x0/0x34 returned 0 after 0 usecs
[ 0.015712] calling kaslr_init+0x0/0x84 @ 1
[ 0.015723] KASLR disabled due to lack of seed
[ 0.015729] initcall kaslr_init+0x0/0x84 returned 0 after 0 usecs
[ 0.015740] calling map_entry_trampoline+0x0/0x118 @ 1
[ 0.015764] initcall map_entry_trampoline+0x0/0x118 returned 0 after 0 usecs
[ 0.015776] calling alloc_frozen_cpus+0x0/0x18 @ 1
[ 0.015788] initcall alloc_frozen_cpus+0x0/0x18 returned 0 after 0 usecs
[ 0.015799] calling cpu_hotplug_pm_sync_init+0x0/0x34 @ 1
[ 0.015811] initcall cpu_hotplug_pm_sync_init+0x0/0x34 returned 0 after 0 usecs
[ 0.015824] calling wq_sysfs_init+0x0/0x50 @ 1
[ 0.015868] initcall wq_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 0.015880] calling ksysfs_init+0x0/0xc8 @ 1
[ 0.015901] initcall ksysfs_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.015911] calling schedutil_gov_init+0x0/0x2c @ 1
[ 0.015921] initcall schedutil_gov_init+0x0/0x2c returned 0 after 0 usecs
[ 0.015931] calling pm_init+0x0/0x88 @ 1
[ 0.015968] initcall pm_init+0x0/0x88 returned 0 after 0 usecs
[ 0.015979] calling pm_disk_init+0x0/0x34 @ 1
[ 0.015993] initcall pm_disk_init+0x0/0x34 returned 0 after 0 usecs
[ 0.016004] calling swsusp_header_init+0x0/0x48 @ 1
[ 0.016014] initcall swsusp_header_init+0x0/0x48 returned 0 after 0 usecs
[ 0.016024] calling rcu_set_runtime_mode+0x0/0x34 @ 1
[ 0.016035] initcall rcu_set_runtime_mode+0x0/0x34 returned 0 after 0 usecs
[ 0.016045] calling dma_init_reserved_memory+0x0/0x74 @ 1
[ 0.016056] initcall dma_init_reserved_memory+0x0/0x74 returned -12 after 0 usecs
[ 0.016068] calling dma_debug_init+0x0/0x220 @ 1
[ 0.021866] DMA-API: preallocated 65536 debug entries
[ 0.021890] DMA-API: debugging enabled by kernel config
[ 0.021898] initcall dma_debug_init+0x0/0x220 returned 0 after 3906 usecs
[ 0.021920] calling init_jiffies_clocksource+0x0/0x34 @ 1
[ 0.021934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.021948] initcall init_jiffies_clocksource+0x0/0x34 returned 0 after 0 usecs
[ 0.021960] calling futex_init+0x0/0x114 @ 1
[ 0.021975] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.022009] initcall futex_init+0x0/0x114 returned 0 after 0 usecs
[ 0.022020] calling cgroup_wq_init+0x0/0x48 @ 1
[ 0.022044] initcall cgroup_wq_init+0x0/0x48 returned 0 after 0 usecs
[ 0.022055] calling cgroup1_wq_init+0x0/0x48 @ 1
[ 0.022069] initcall cgroup1_wq_init+0x0/0x48 returned 0 after 0 usecs
[ 0.022081] calling ftrace_mod_cmd_init+0x0/0x28 @ 1
[ 0.022094] initcall ftrace_mod_cmd_init+0x0/0x28 returned 0 after 0 usecs
[ 0.022105] calling init_graph_trace+0x0/0x88 @ 1
[ 0.022124] initcall init_graph_trace+0x0/0x88 returned 0 after 0 usecs
[ 0.022136] calling cpu_pm_init+0x0/0x30 @ 1
[ 0.022150] initcall cpu_pm_init+0x0/0x30 returned 0 after 0 usecs
[ 0.022161] calling init_zero_pfn+0x0/0x38 @ 1
[ 0.022170] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
[ 0.022180] calling mem_cgroup_swap_init+0x0/0x80 @ 1
[ 0.022201] initcall mem_cgroup_swap_init+0x0/0x80 returned 0 after 0 usecs
[ 0.022212] calling memory_failure_init+0x0/0xb0 @ 1
[ 0.022222] initcall memory_failure_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.022233] calling cma_init_reserved_areas+0x0/0x194 @ 1
[ 0.022705] initcall cma_init_reserved_areas+0x0/0x194 returned 0 after 0 usecs
[ 0.022719] calling fsnotify_init+0x0/0x64 @ 1
[ 0.022758] initcall fsnotify_init+0x0/0x64 returned 0 after 0 usecs
[ 0.022770] calling filelock_init+0x0/0xdc @ 1
[ 0.022792] initcall filelock_init+0x0/0xdc returned 0 after 0 usecs
[ 0.022804] calling init_script_binfmt+0x0/0x34 @ 1
[ 0.022815] initcall init_script_binfmt+0x0/0x34 returned 0 after 0 usecs
[ 0.022827] calling init_elf_binfmt+0x0/0x34 @ 1
[ 0.022838] initcall init_elf_binfmt+0x0/0x34 returned 0 after 0 usecs
[ 0.022849] calling init_compat_elf_binfmt+0x0/0x34 @ 1
[ 0.022860] initcall init_compat_elf_binfmt+0x0/0x34 returned 0 after 0 usecs
[ 0.022872] calling configfs_init+0x0/0xc4 @ 1
[ 0.022894] initcall configfs_init+0x0/0xc4 returned 0 after 0 usecs
[ 0.022906] calling debugfs_init+0x0/0x98 @ 1
[ 0.022917] initcall debugfs_init+0x0/0x98 returned 0 after 0 usecs
[ 0.022927] calling tracefs_init+0x0/0x5c @ 1
[ 0.022938] initcall tracefs_init+0x0/0x5c returned 0 after 0 usecs
[ 0.022948] calling securityfs_init+0x0/0xa0 @ 1
[ 0.023017] initcall securityfs_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.023032] calling prandom_init_early+0x0/0x12c @ 1
[ 0.023043] initcall prandom_init_early+0x0/0x12c returned 0 after 0 usecs
[ 0.023053] calling pinctrl_init+0x0/0xd0 @ 1
[ 0.023065] pinctrl core: initialized pinctrl subsystem
[ 0.023096] initcall pinctrl_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.023109] calling gpiolib_dev_init+0x0/0x14c @ 1
[ 0.023180] initcall gpiolib_dev_init+0x0/0x14c returned 0 after 0 usecs
[ 0.023194] calling fsl_guts_init+0x0/0x30 @ 1
[ 0.023220] initcall fsl_guts_init+0x0/0x30 returned 0 after 0 usecs
[ 0.023232] calling virtio_init+0x0/0x40 @ 1
[ 0.023254] initcall virtio_init+0x0/0x40 returned 0 after 0 usecs
[ 0.023265] calling regulator_init+0x0/0xc4 @ 1
[ 0.023424] initcall regulator_init+0x0/0xc4 returned 0 after 0 usecs
[ 0.023437] calling iommu_init+0x0/0x50 @ 1
[ 0.023453]
[ 0.023459] *************************************************************
[ 0.023466] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.023473] ** **
[ 0.023480] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[ 0.023487] ** **
[ 0.023494] ** This means that this kernel is built to expose internal **
[ 0.023500] ** IOMMU data structures, which may compromise security on **
[ 0.023507] ** your system. **
[ 0.023514] ** **
[ 0.023520] ** If you see this message and you are not debugging the **
[ 0.023527] ** kernel, report this immediately to your vendor! **
[ 0.023534] ** **
[ 0.023540] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.023547] *************************************************************
[ 0.023554] initcall iommu_init+0x0/0x50 returned 0 after 0 usecs
[ 0.023564] calling component_debug_init+0x0/0x3c @ 1
[ 0.023578] initcall component_debug_init+0x0/0x3c returned 0 after 0 usecs
[ 0.023590] calling genpd_bus_init+0x0/0x30 @ 1
[ 0.023611] initcall genpd_bus_init+0x0/0x30 returned 0 after 0 usecs
[ 0.023622] calling soc_bus_register+0x0/0x64 @ 1
[ 0.023642] initcall soc_bus_register+0x0/0x64 returned 0 after 0 usecs
[ 0.023653] calling register_cpufreq_notifier+0x0/0x70 @ 1
[ 0.023664] initcall register_cpufreq_notifier+0x0/0x70 returned -22 after 0 usecs
[ 0.023676] calling opp_debug_init+0x0/0x3c @ 1
[ 0.023697] initcall opp_debug_init+0x0/0x3c returned 0 after 0 usecs
[ 0.023709] calling cpufreq_core_init+0x0/0x88 @ 1
[ 0.023723] initcall cpufreq_core_init+0x0/0x88 returned 0 after 0 usecs
[ 0.023733] calling cpufreq_gov_performance_init+0x0/0x2c @ 1
[ 0.023745] initcall cpufreq_gov_performance_init+0x0/0x2c returned 0 after 0 usecs
[ 0.023756] calling cpufreq_gov_userspace_init+0x0/0x2c @ 1
[ 0.023767] initcall cpufreq_gov_userspace_init+0x0/0x2c returned 0 after 0 usecs
[ 0.023778] calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x30 @ 1
[ 0.023789] initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x30 returned 0 after 0 usecs
[ 0.023800] calling cpufreq_dt_platdev_init+0x0/0x150 @ 1
[ 0.023837] initcall cpufreq_dt_platdev_init+0x0/0x150 returned -19 after 0 usecs
[ 0.023849] calling cpuidle_init+0x0/0x40 @ 1
[ 0.023867] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
[ 0.023878] calling capsule_reboot_register+0x0/0x30 @ 1
[ 0.023890] initcall capsule_reboot_register+0x0/0x30 returned 0 after 0 usecs
[ 0.023902] calling arm_dmi_init+0x0/0x40 @ 1
[ 0.023914] DMI not present or invalid.
[ 0.023920] initcall arm_dmi_init+0x0/0x40 returned 0 after 0 usecs
[ 0.023931] calling sock_init+0x0/0xc4 @ 1
[ 0.024163] initcall sock_init+0x0/0xc4 returned 0 after 3906 usecs
[ 0.024177] calling net_inuse_init+0x0/0x40 @ 1
[ 0.024191] initcall net_inuse_init+0x0/0x40 returned 0 after 0 usecs
[ 0.024201] calling net_defaults_init+0x0/0x40 @ 1
[ 0.024211] initcall net_defaults_init+0x0/0x40 returned 0 after 0 usecs
[ 0.024221] calling init_default_flow_dissectors+0x0/0x6c @ 1
[ 0.024232] initcall init_default_flow_dissectors+0x0/0x6c returned 0 after 0 usecs
[ 0.024244] calling netlink_proto_init+0x0/0x178 @ 1
[ 0.024302] NET: Registered protocol family 16
[ 0.024331] initcall netlink_proto_init+0x0/0x178 returned 0 after 0 usecs
[ 0.024344] calling genl_init+0x0/0x5c @ 1
[ 0.024362] initcall genl_init+0x0/0x5c returned 0 after 0 usecs
[ 0.024373] calling trace_boot_init+0x0/0xf0 @ 1
[ 0.024386] initcall trace_boot_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.024397] calling __gnttab_init+0x0/0x48 @ 1
[ 0.024408] initcall __gnttab_init+0x0/0x48 returned -19 after 0 usecs
[ 0.024484] calling debug_monitors_init+0x0/0x44 @ 1
[ 0.024532] initcall debug_monitors_init+0x0/0x44 returned 0 after 0 usecs
[ 0.024545] calling irq_sysfs_init+0x0/0xc0 @ 1
[ 0.024663] initcall irq_sysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.024674] calling dma_atomic_pool_init+0x0/0x154 @ 1
[ 0.025243] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.025353] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.025526] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.025555] initcall dma_atomic_pool_init+0x0/0x154 returned 0 after 0 usecs
[ 0.025568] calling audit_init+0x0/0x154 @ 1
[ 0.025582] audit: initializing netlink subsys (disabled)
[ 0.025709] initcall audit_init+0x0/0x154 returned 0 after 0 usecs
[ 0.025712] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
[ 0.025730] calling release_early_probes+0x0/0x64 @ 1
[ 0.025742] initcall release_early_probes+0x0/0x64 returned 0 after 0 usecs
[ 0.025753] calling bdi_class_init+0x0/0x88 @ 1
[ 0.025781] initcall bdi_class_init+0x0/0x88 returned 0 after 0 usecs
[ 0.025792] calling mm_sysfs_init+0x0/0x4c @ 1
[ 0.025804] initcall mm_sysfs_init+0x0/0x4c returned 0 after 0 usecs
[ 0.025814] calling init_per_zone_wmark_min+0x0/0x90 @ 1
[ 0.025832] initcall init_per_zone_wmark_min+0x0/0x90 returned 0 after 0 usecs
[ 0.025845] calling mpi_init+0x0/0x8c @ 1
[ 0.025858] initcall mpi_init+0x0/0x8c returned 0 after 0 usecs
[ 0.025868] calling kobject_uevent_init+0x0/0x24 @ 1
[ 0.025896] initcall kobject_uevent_init+0x0/0x24 returned 0 after 0 usecs
[ 0.025908] calling acpi_gpio_setup_params+0x0/0x80 @ 1
[ 0.025921] initcall acpi_gpio_setup_params+0x0/0x80 returned 0 after 0 usecs
[ 0.025933] calling pcibus_class_init+0x0/0x34 @ 1
[ 0.025953] initcall pcibus_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.025965] calling pci_driver_init+0x0/0x5c @ 1
[ 0.026005] initcall pci_driver_init+0x0/0x5c returned 0 after 0 usecs
[ 0.026018] calling backlight_class_init+0x0/0xcc @ 1
[ 0.026033] initcall backlight_class_init+0x0/0xcc returned 0 after 0 usecs
[ 0.026044] calling amba_init+0x0/0x2c @ 1
[ 0.026067] initcall amba_init+0x0/0x2c returned 0 after 0 usecs
[ 0.026079] calling xenbus_init+0x0/0x2b0 @ 1
[ 0.026091] initcall xenbus_init+0x0/0x2b0 returned -19 after 0 usecs
[ 0.026103] calling tty_class_init+0x0/0x68 @ 1
[ 0.026117] initcall tty_class_init+0x0/0x68 returned 0 after 0 usecs
[ 0.026127] calling vtconsole_class_init+0x0/0x104 @ 1
[ 0.026171] initcall vtconsole_class_init+0x0/0x104 returned 0 after 0 usecs
[ 0.026183] calling serdev_init+0x0/0x3c @ 1
[ 0.026202] initcall serdev_init+0x0/0x3c returned 0 after 0 usecs
[ 0.026213] calling iommu_dev_init+0x0/0x34 @ 1
[ 0.026229] initcall iommu_dev_init+0x0/0x34 returned 0 after 0 usecs
[ 0.026240] calling devlink_class_init+0x0/0x70 @ 1
[ 0.026256] initcall devlink_class_init+0x0/0x70 returned 0 after 0 usecs
[ 0.026267] calling software_node_init+0x0/0x50 @ 1
[ 0.026279] initcall software_node_init+0x0/0x50 returned 0 after 0 usecs
[ 0.026290] calling wakeup_sources_debugfs_init+0x0/0x44 @ 1
[ 0.026305] initcall wakeup_sources_debugfs_init+0x0/0x44 returned 0 after 0 usecs
[ 0.026318] calling wakeup_sources_sysfs_init+0x0/0x50 @ 1
[ 0.026336] initcall wakeup_sources_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 0.026348] calling register_node_type+0x0/0x30 @ 1
[ 0.026386] initcall register_node_type+0x0/0x30 returned 0 after 0 usecs
[ 0.026398] calling regmap_initcall+0x0/0x28 @ 1
[ 0.026413] initcall regmap_initcall+0x0/0x28 returned 0 after 0 usecs
[ 0.026424] calling sram_init+0x0/0x30 @ 1
[ 0.026447] initcall sram_init+0x0/0x30 returned 0 after 0 usecs
[ 0.026459] calling syscon_init+0x0/0x34 @ 1
[ 0.026478] initcall syscon_init+0x0/0x34 returned 0 after 0 usecs
[ 0.026489] calling spi_init+0x0/0xd4 @ 1
[ 0.026519] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs
[ 0.026530] calling spmi_init+0x0/0x40 @ 1
[ 0.026550] initcall spmi_init+0x0/0x40 returned 0 after 0 usecs
[ 0.026562] calling i2c_init+0x0/0x10c @ 1
[ 0.026593] initcall i2c_init+0x0/0x10c returned 0 after 0 usecs
[ 0.026603] calling thermal_init+0x0/0x15c @ 1
[ 0.026634] thermal_sys: Registered thermal governor 'step_wise'
[ 0.026793] initcall thermal_init+0x0/0x15c returned 0 after 0 usecs
[ 0.026810] calling init_menu+0x0/0x2c @ 1
[ 0.026909] cpuidle: using governor menu
[ 0.026919] initcall init_menu+0x0/0x2c returned 0 after 0 usecs
[ 0.026931] calling pcc_init+0x0/0x74 @ 1
[ 0.026941] initcall pcc_init+0x0/0x74 returned -19 after 0 usecs
[ 0.026951] calling rpmsg_init+0x0/0x5c @ 1
[ 0.026974] initcall rpmsg_init+0x0/0x5c returned 0 after 0 usecs
[ 0.027035] calling reserve_memblock_reserved_regions+0x0/0x16c @ 1
[ 0.027065] initcall reserve_memblock_reserved_regions+0x0/0x16c returned 0 after 0 usecs
[ 0.027078] calling aarch32_alloc_vdso_pages+0x0/0xd8 @ 1
[ 0.027094] initcall aarch32_alloc_vdso_pages+0x0/0xd8 returned 0 after 0 usecs
[ 0.027105] calling vdso_init+0x0/0xf8 @ 1
[ 0.027116] initcall vdso_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.027126] calling arch_hw_breakpoint_init+0x0/0x100 @ 1
[ 0.027138] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.027183] initcall arch_hw_breakpoint_init+0x0/0x100 returned 0 after 0 usecs
[ 0.027197] calling asids_update_limit+0x0/0x120 @ 1
[ 0.027209] ASID allocator initialised with 65536 entries
[ 0.027216] initcall asids_update_limit+0x0/0x120 returned 0 after 0 usecs
[ 0.027226] calling hugetlbpage_init+0x0/0x44 @ 1
[ 0.027240] initcall hugetlbpage_init+0x0/0x44 returned 0 after 0 usecs
[ 0.027252] calling p2m_init+0x0/0x20 @ 1
[ 0.027264] initcall p2m_init+0x0/0x20 returned 0 after 0 usecs
[ 0.027276] calling xen_mm_init+0x0/0x9c @ 1
[ 0.027286] initcall xen_mm_init+0x0/0x9c returned 0 after 0 usecs
[ 0.027297] calling cryptomgr_init+0x0/0x2c @ 1
[ 0.027308] initcall cryptomgr_init+0x0/0x2c returned 0 after 0 usecs
[ 0.027318] calling mpc8xxx_init+0x0/0x30 @ 1
[ 0.027342] initcall mpc8xxx_init+0x0/0x30 returned 0 after 0 usecs
[ 0.027354] calling acpi_pci_init+0x0/0x8c @ 1
[ 0.027363] initcall acpi_pci_init+0x0/0x8c returned 0 after 0 usecs
[ 0.027373] calling dma_channel_table_init+0x0/0x158 @ 1
[ 0.027403] initcall dma_channel_table_init+0x0/0x158 returned 0 after 0 usecs
[ 0.027416] calling dma_bus_init+0x0/0x18c @ 1
[ 0.027477] initcall dma_bus_init+0x0/0x18c returned 0 after 0 usecs
[ 0.027491] calling brcmstb_soc_device_init+0x0/0x144 @ 1
[ 0.027698] initcall brcmstb_soc_device_init+0x0/0x144 returned 0 after 0 usecs
[ 0.027711] calling register_xen_platform_notifier+0x0/0x60 @ 1
[ 0.027723] initcall register_xen_platform_notifier+0x0/0x60 returned 0 after 0 usecs
[ 0.027736] calling register_xen_amba_notifier+0x0/0x64 @ 1
[ 0.027748] initcall register_xen_amba_notifier+0x0/0x64 returned 0 after 0 usecs
[ 0.027761] calling register_xen_pci_notifier+0x0/0x54 @ 1
[ 0.027772] initcall register_xen_pci_notifier+0x0/0x54 returned 0 after 0 usecs
[ 0.027785] calling pl011_init+0x0/0x60 @ 1
[ 0.027794] Serial: AMBA PL011 UART driver
[ 0.027816] initcall pl011_init+0x0/0x60 returned 0 after 0 usecs
[ 0.027827] calling cdns_uart_init+0x0/0x30 @ 1
[ 0.027844] initcall cdns_uart_init+0x0/0x30 returned 0 after 0 usecs
[ 0.027854] calling iommu_dma_init+0x0/0x28 @ 1
[ 0.027867] initcall iommu_dma_init+0x0/0x28 returned 0 after 0 usecs
[ 0.027877] calling dmi_id_init+0x0/0x2ec @ 1
[ 0.027889] initcall dmi_id_init+0x0/0x2ec returned -19 after 0 usecs
[ 0.027899] calling of_platform_default_populate_init+0x0/0xdc @ 1
[ 0.029744] Machine: Kontron KBox A-230-LS
[ 0.029754] SoC family: QorIQ LS1028A
[ 0.029760] SoC ID: svr:0x870b0110, Revision: 1.0
[ 0.030477] platform 20c0000.spi: Linked as a consumer to 1e00900.clock-controller
[ 0.031380] platform 2270000.serial: Linked as a consumer to 22c0000.dma-controller
[ 0.031418] platform 2120000.spi: Linked as a consumer to 22c0000.dma-controller
[ 0.031853] platform 2000000.i2c: Linked as a sync state only consumer to 2310000.gpio
[ 0.034671] platform 3500000.pcie: Linked as a consumer to 5000000.iommu
[ 0.034712] platform 3400000.pcie: Linked as a consumer to 5000000.iommu
[ 0.034744] platform 3200000.sata: Linked as a consumer to 5000000.iommu
[ 0.034776] platform 3110000.usb: Linked as a consumer to 5000000.iommu
[ 0.034811] platform 3100000.usb: Linked as a consumer to 5000000.iommu
[ 0.034846] platform 22c0000.dma-controller: Linked as a consumer to 5000000.iommu
[ 0.034886] platform 2150000.mmc: Linked as a consumer to 5000000.iommu
[ 0.034921] platform 2140000.mmc: Linked as a consumer to 5000000.iommu
[ 0.035058] platform 8000000.crypto: Linked as a sync state only consumer to 5000000.iommu
[ 0.035339] platform 8380000.dma-controller: Linked as a consumer to 5000000.iommu
[ 0.035777] platform 1f0000000.pcie: Linked as a consumer to 5000000.iommu
[ 0.036163] platform f080000.display: Linked as a consumer to f1f0000.clock-controller
[ 0.036201] platform f080000.display: Linked as a consumer to 5000000.iommu
[ 0.036438] initcall of_platform_default_populate_init+0x0/0xdc returned 0 after 11718 usecs
[ 0.036519] calling topology_init+0x0/0x130 @ 1
[ 0.036651] initcall topology_init+0x0/0x130 returned 0 after 0 usecs
[ 0.036664] calling uid_cache_init+0x0/0xac @ 1
[ 0.036684] initcall uid_cache_init+0x0/0xac returned 0 after 0 usecs
[ 0.036694] calling param_sysfs_init+0x0/0x1e8 @ 1
[ 0.041587] initcall param_sysfs_init+0x0/0x1e8 returned 0 after 3906 usecs
[ 0.041604] calling user_namespace_sysctl_init+0x0/0x5c @ 1
[ 0.041633] initcall user_namespace_sysctl_init+0x0/0x5c returned 0 after 0 usecs
[ 0.041645] calling pm_sysrq_init+0x0/0x34 @ 1
[ 0.041778] initcall pm_sysrq_init+0x0/0x34 returned 0 after 0 usecs
[ 0.041794] calling create_proc_profile+0x0/0x118 @ 1
[ 0.041807] initcall create_proc_profile+0x0/0x118 returned 0 after 0 usecs
[ 0.041817] calling time_ns_init+0x0/0x18 @ 1
[ 0.041829] initcall time_ns_init+0x0/0x18 returned 0 after 0 usecs
[ 0.041840] calling crash_save_vmcoreinfo_init+0x0/0x694 @ 1
[ 0.041923] initcall crash_save_vmcoreinfo_init+0x0/0x694 returned 0 after 0 usecs
[ 0.041936] calling crash_notes_memory_init+0x0/0x50 @ 1
[ 0.041952] initcall crash_notes_memory_init+0x0/0x50 returned 0 after 0 usecs
[ 0.041965] calling cgroup_sysfs_init+0x0/0x38 @ 1
[ 0.041982] initcall cgroup_sysfs_init+0x0/0x38 returned 0 after 0 usecs
[ 0.041993] calling cgroup_namespaces_init+0x0/0x18 @ 1
[ 0.042004] initcall cgroup_namespaces_init+0x0/0x18 returned 0 after 0 usecs
[ 0.042016] calling user_namespaces_init+0x0/0x48 @ 1
[ 0.042038] initcall user_namespaces_init+0x0/0x48 returned 0 after 0 usecs
[ 0.042050] calling oom_init+0x0/0x4c @ 1
[ 0.042116] initcall oom_init+0x0/0x4c returned 0 after 0 usecs
[ 0.042130] calling default_bdi_init+0x0/0xa8 @ 1
[ 0.042251] initcall default_bdi_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.042264] calling cgwb_init+0x0/0x4c @ 1
[ 0.042276] initcall cgwb_init+0x0/0x4c returned 0 after 0 usecs
[ 0.042286] calling percpu_enable_async+0x0/0x24 @ 1
[ 0.042295] initcall percpu_enable_async+0x0/0x24 returned 0 after 0 usecs
[ 0.042305] calling kcompactd_init+0x0/0xcc @ 1
[ 0.042364] initcall kcompactd_init+0x0/0xcc returned 0 after 0 usecs
[ 0.042378] calling init_user_reserve+0x0/0x40 @ 1
[ 0.042389] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.042399] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.042409] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.042419] calling init_reserve_notifier+0x0/0x10 @ 1
[ 0.042431] initcall init_reserve_notifier+0x0/0x10 returned 0 after 0 usecs
[ 0.042443] calling swap_init_sysfs+0x0/0x84 @ 1
[ 0.042458] initcall swap_init_sysfs+0x0/0x84 returned 0 after 0 usecs
[ 0.042469] calling swapfile_init+0x0/0xd0 @ 1
[ 0.042479] initcall swapfile_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.042489] calling hugetlb_init+0x0/0x4bc @ 1
[ 0.042503] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.042513] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.042521] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.042529] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.042630] initcall hugetlb_init+0x0/0x4bc returned 0 after 0 usecs
[ 0.042643] calling ksm_init+0x0/0x198 @ 1
[ 0.042729] initcall ksm_init+0x0/0x198 returned 0 after 0 usecs
[ 0.042743] calling hugepage_init+0x0/0x168 @ 1
[ 0.042835] initcall hugepage_init+0x0/0x168 returned 0 after 0 usecs
[ 0.042850] calling mem_cgroup_init+0x0/0x178 @ 1
[ 0.042862] initcall mem_cgroup_init+0x0/0x178 returned 0 after 0 usecs
[ 0.042873] calling io_wq_init+0x0/0x54 @ 1
[ 0.042884] initcall io_wq_init+0x0/0x54 returned 0 after 0 usecs
[ 0.042895] calling echainiv_module_init+0x0/0x2c @ 1
[ 0.042906] initcall echainiv_module_init+0x0/0x2c returned 0 after 0 usecs
[ 0.042916] calling rsa_init+0x0/0x68 @ 1
[ 0.042986] initcall rsa_init+0x0/0x68 returned 0 after 0 usecs
[ 0.043001] calling hmac_module_init+0x0/0x2c @ 1
[ 0.043011] initcall hmac_module_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043021] calling crypto_null_mod_init+0x0/0x90 @ 1
[ 0.043267] initcall crypto_null_mod_init+0x0/0x90 returned 0 after 0 usecs
[ 0.043282] calling md5_mod_init+0x0/0x2c @ 1
[ 0.043338] initcall md5_mod_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043352] calling sha1_generic_mod_init+0x0/0x2c @ 1
[ 0.043407] initcall sha1_generic_mod_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043422] calling sha256_generic_mod_init+0x0/0x30 @ 1
[ 0.043523] initcall sha256_generic_mod_init+0x0/0x30 returned 0 after 0 usecs
[ 0.043538] calling crypto_ecb_module_init+0x0/0x2c @ 1
[ 0.043548] initcall crypto_ecb_module_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043558] calling crypto_cbc_module_init+0x0/0x2c @ 1
[ 0.043568] initcall crypto_cbc_module_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043579] calling cryptd_init+0x0/0x138 @ 1
[ 0.043634] cryptd: max_cpu_qlen set to 1000
[ 0.043644] initcall cryptd_init+0x0/0x138 returned 0 after 0 usecs
[ 0.043656] calling aes_init+0x0/0x2c @ 1
[ 0.043716] initcall aes_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043729] calling deflate_mod_init+0x0/0x60 @ 1
[ 0.043882] initcall deflate_mod_init+0x0/0x60 returned 0 after 0 usecs
[ 0.043896] calling crc32c_mod_init+0x0/0x2c @ 1
[ 0.043951] initcall crc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
[ 0.043965] calling crct10dif_mod_init+0x0/0x2c @ 1
[ 0.044020] initcall crct10dif_mod_init+0x0/0x2c returned 0 after 0 usecs
[ 0.044034] calling prng_mod_init+0x0/0x30 @ 1
[ 0.044104] initcall prng_mod_init+0x0/0x30 returned 0 after 0 usecs
[ 0.044117] calling drbg_init+0x0/0xfc @ 1
[ 0.044532] initcall drbg_init+0x0/0xfc returned 0 after 0 usecs
[ 0.044548] calling init_bio+0x0/0xfc @ 1
[ 0.044634] initcall init_bio+0x0/0xfc returned 0 after 0 usecs
[ 0.044649] calling blk_settings_init+0x0/0x40 @ 1
[ 0.044659] initcall blk_settings_init+0x0/0x40 returned 0 after 0 usecs
[ 0.044670] calling blk_ioc_init+0x0/0x48 @ 1
[ 0.044680] initcall blk_ioc_init+0x0/0x48 returned 0 after 0 usecs
[ 0.044691] calling blk_mq_init+0x0/0x104 @ 1
[ 0.044702] initcall blk_mq_init+0x0/0x104 returned 0 after 0 usecs
[ 0.044713] calling genhd_device_init+0x0/0x8c @ 1
[ 0.044817] initcall genhd_device_init+0x0/0x8c returned 0 after 0 usecs
[ 0.044832] calling blkcg_init+0x0/0x4c @ 1
[ 0.044923] initcall blkcg_init+0x0/0x4c returned 0 after 0 usecs
[ 0.044937] calling irq_poll_setup+0x0/0xb0 @ 1
[ 0.044949] initcall irq_poll_setup+0x0/0xb0 returned 0 after 0 usecs
[ 0.044959] calling gpiolib_debugfs_init+0x0/0x48 @ 1
[ 0.044978] initcall gpiolib_debugfs_init+0x0/0x48 returned 0 after 0 usecs
[ 0.044990] calling max732x_init+0x0/0x30 @ 1
[ 0.045015] initcall max732x_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045027] calling pca953x_init+0x0/0x30 @ 1
[ 0.045047] initcall pca953x_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045059] calling pwm_debugfs_init+0x0/0x44 @ 1
[ 0.045074] initcall pwm_debugfs_init+0x0/0x44 returned 0 after 0 usecs
[ 0.045087] calling pwm_sysfs_init+0x0/0x34 @ 1
[ 0.045105] initcall pwm_sysfs_init+0x0/0x34 returned 0 after 0 usecs
[ 0.045117] calling pci_slot_init+0x0/0x68 @ 1
[ 0.045133] initcall pci_slot_init+0x0/0x68 returned 0 after 0 usecs
[ 0.045144] calling xgene_pcie_msi_init+0x0/0x30 @ 1
[ 0.045240] initcall xgene_pcie_msi_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045251] calling altera_msi_init+0x0/0x30 @ 1
[ 0.045295] initcall altera_msi_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045305] calling fbmem_init+0x0/0x108 @ 1
[ 0.045354] initcall fbmem_init+0x0/0x108 returned 0 after 0 usecs
[ 0.045365] calling acpi_init+0x0/0x328 @ 1
[ 0.045374] ACPI: Interpreter disabled.
[ 0.045381] initcall acpi_init+0x0/0x328 returned -19 after 0 usecs
[ 0.045391] calling pnp_init+0x0/0x2c @ 1
[ 0.045414] initcall pnp_init+0x0/0x2c returned 0 after 0 usecs
[ 0.045425] calling fsl_edma_init+0x0/0x30 @ 1
[ 0.045474] platform 22c0000.dma-controller: probe deferral - supplier 5000000.iommu not ready
[ 0.045516] initcall fsl_edma_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045528] calling balloon_init+0x0/0xec @ 1
[ 0.045540] initcall balloon_init+0x0/0xec returned -19 after 0 usecs
[ 0.045552] calling xen_setup_shutdown_event+0x0/0x58 @ 1
[ 0.045564] initcall xen_setup_shutdown_event+0x0/0x58 returned -19 after 0 usecs
[ 0.045576] calling xenbus_probe_backend_init+0x0/0x64 @ 1
[ 0.045600] initcall xenbus_probe_backend_init+0x0/0x64 returned 0 after 0 usecs
[ 0.045614] calling xenbus_probe_frontend_init+0x0/0x4c @ 1
[ 0.045640] initcall xenbus_probe_frontend_init+0x0/0x4c returned 0 after 0 usecs
[ 0.045654] calling regulator_fixed_voltage_init+0x0/0x30 @ 1
[ 0.045711] initcall regulator_fixed_voltage_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045723] calling gpio_regulator_init+0x0/0x30 @ 1
[ 0.045767] initcall gpio_regulator_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045777] calling max8973_init+0x0/0x30 @ 1
[ 0.045794] initcall max8973_init+0x0/0x30 returned 0 after 0 usecs
[ 0.045805] calling misc_init+0x0/0xec @ 1
[ 0.045823] initcall misc_init+0x0/0xec returned 0 after 0 usecs
[ 0.045833] calling tpm_init+0x0/0x128 @ 1
[ 0.045914] initcall tpm_init+0x0/0x128 returned 0 after 0 usecs
[ 0.045927] calling iommu_subsys_init+0x0/0x88 @ 1
[ 0.045938] iommu: Default domain type: Translated
[ 0.045945] initcall iommu_subsys_init+0x0/0x88 returned 0 after 0 usecs
[ 0.045955] calling vga_arb_device_init+0x0/0x1c8 @ 1
[ 0.046044] vgaarb: loaded
[ 0.046051] initcall vga_arb_device_init+0x0/0x1c8 returned 0 after 0 usecs
[ 0.046063] calling register_cpu_capacity_sysctl+0x0/0xa8 @ 1
[ 0.046080] initcall register_cpu_capacity_sysctl+0x0/0xa8 returned 0 after 0 usecs
[ 0.046091] calling sec_pmic_init+0x0/0x30 @ 1
[ 0.046112] initcall sec_pmic_init+0x0/0x30 returned 0 after 0 usecs
[ 0.046124] calling bd718xx_i2c_init+0x0/0x30 @ 1
[ 0.046143] initcall bd718xx_i2c_init+0x0/0x30 returned 0 after 0 usecs
[ 0.046154] calling dma_buf_init+0x0/0xc8 @ 1
[ 0.046197] initcall dma_buf_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.046210] calling init_scsi+0x0/0x94 @ 1
[ 0.046319] SCSI subsystem initialized
[ 0.046326] initcall init_scsi+0x0/0x94 returned 0 after 0 usecs
[ 0.046338] calling ata_init+0x0/0x360 @ 1
[ 0.046427] libata version 3.00 loaded.
[ 0.046436] initcall ata_init+0x0/0x360 returned 0 after 0 usecs
[ 0.046448] calling pl022_init+0x0/0x2c @ 1
[ 0.046475] initcall pl022_init+0x0/0x2c returned 0 after 0 usecs
[ 0.046487] calling phy_init+0x0/0x470 @ 1
[ 0.046532] initcall phy_init+0x0/0x470 returned 0 after 0 usecs
[ 0.046544] calling hnae_init+0x0/0x50 @ 1
[ 0.046560] initcall hnae_init+0x0/0x50 returned 0 after 0 usecs
[ 0.046572] calling usb_common_init+0x0/0x3c @ 1
[ 0.046588] initcall usb_common_init+0x0/0x3c returned 0 after 0 usecs
[ 0.046601] calling ulpi_init+0x0/0x2c @ 1
[ 0.046623] initcall ulpi_init+0x0/0x2c returned 0 after 0 usecs
[ 0.046635] calling usb_init+0x0/0x160 @ 1
[ 0.046696] usbcore: registered new interface driver usbfs
[ 0.046721] usbcore: registered new interface driver hub
[ 0.046742] usbcore: registered new device driver usb
[ 0.046750] initcall usb_init+0x0/0x160 returned 0 after 0 usecs
[ 0.046762] calling usb_phy_generic_init+0x0/0x30 @ 1
[ 0.046827] initcall usb_phy_generic_init+0x0/0x30 returned 0 after 0 usecs
[ 0.046840] calling usb_udc_init+0x0/0x74 @ 1
[ 0.046854] initcall usb_udc_init+0x0/0x74 returned 0 after 0 usecs
[ 0.046864] calling typec_init+0x0/0xb0 @ 1
[ 0.046896] initcall typec_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.046906] calling usb_roles_init+0x0/0x50 @ 1
[ 0.046923] initcall usb_roles_init+0x0/0x50 returned 0 after 0 usecs
[ 0.046933] calling serio_init+0x0/0x54 @ 1
[ 0.046952] initcall serio_init+0x0/0x54 returned 0 after 0 usecs
[ 0.046961] calling input_init+0x0/0x130 @ 1
[ 0.046982] initcall input_init+0x0/0x130 returned 0 after 0 usecs
[ 0.046992] calling rtc_init+0x0/0x74 @ 1
[ 0.047007] initcall rtc_init+0x0/0x74 returned 0 after 0 usecs
[ 0.047017] calling dw_i2c_init_driver+0x0/0x30 @ 1
[ 0.047074] initcall dw_i2c_init_driver+0x0/0x30 returned 0 after 0 usecs
[ 0.047085] calling i2c_adap_imx_init+0x0/0x30 @ 1
[ 0.047229] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
[ 0.047438] i2c 0-004a: Linked as a sync state only consumer to 2310000.gpio
[ 0.047522] i2c i2c-0: IMX I2C adapter registered
[ 0.047671] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported
[ 0.047781] i2c i2c-1: IMX I2C adapter registered
[ 0.047881] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported
[ 0.047983] i2c i2c-2: IMX I2C adapter registered
[ 0.048061] initcall i2c_adap_imx_init+0x0/0x30 returned 0 after 3906 usecs
[ 0.048075] calling media_devnode_init+0x0/0xa0 @ 1
[ 0.048086] mc: Linux media interface: v0.10
[ 0.048108] initcall media_devnode_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.048119] calling videodev_init+0x0/0xa8 @ 1
[ 0.048129] videodev: Linux video capture interface: v2.00
[ 0.048142] initcall videodev_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.048152] calling init_dvbdev+0x0/0x100 @ 1
[ 0.048170] initcall init_dvbdev+0x0/0x100 returned 0 after 0 usecs
[ 0.048181] calling pps_init+0x0/0xdc @ 1
[ 0.048198] pps_core: LinuxPPS API ver. 1 registered
[ 0.048205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.048214] initcall pps_init+0x0/0xdc returned 0 after 0 usecs
[ 0.048225] calling ptp_init+0x0/0xc0 @ 1
[ 0.048239] PTP clock support registered
[ 0.048246] initcall ptp_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.048256] calling brcmstb_reboot_init+0x0/0x38 @ 1
[ 0.048316] initcall brcmstb_reboot_init+0x0/0x38 returned -19 after 0 usecs
[ 0.048327] calling power_supply_class_init+0x0/0x6c @ 1
[ 0.048350] initcall power_supply_class_init+0x0/0x6c returned 0 after 0 usecs
[ 0.048361] calling hwmon_init+0x0/0x58 @ 1
[ 0.048376] initcall hwmon_init+0x0/0x58 returned 0 after 0 usecs
[ 0.048387] calling edac_init+0x0/0x98 @ 1
[ 0.048396] EDAC MC: Ver: 3.0.0
[ 0.048518] initcall edac_init+0x0/0x98 returned 0 after 0 usecs
[ 0.048532] calling psci_idle_init_domains+0x0/0x30 @ 1
[ 0.048586] initcall psci_idle_init_domains+0x0/0x30 returned 0 after 0 usecs
[ 0.048598] calling mmc_init+0x0/0x58 @ 1
[ 0.048634] initcall mmc_init+0x0/0x58 returned 0 after 0 usecs
[ 0.048645] calling leds_init+0x0/0x78 @ 1
[ 0.048661] initcall leds_init+0x0/0x78 returned 0 after 0 usecs
[ 0.048671] calling dmi_init+0x0/0x124 @ 1
[ 0.048681] initcall dmi_init+0x0/0x124 returned 0 after 0 usecs
[ 0.048692] calling efisubsys_init+0x0/0x4f4 @ 1
[ 0.048703] initcall efisubsys_init+0x0/0x4f4 returned 0 after 0 usecs
[ 0.048713] calling register_gop_device+0x0/0xac @ 1
[ 0.048725] initcall register_gop_device+0x0/0xac returned 0 after 0 usecs
[ 0.048736] calling remoteproc_init+0x0/0x4c @ 1
[ 0.048764] initcall remoteproc_init+0x0/0x4c returned 0 after 0 usecs
[ 0.048775] calling glink_rpm_init+0x0/0x30 @ 1
[ 0.048821] initcall glink_rpm_init+0x0/0x30 returned 0 after 0 usecs
[ 0.048832] calling devfreq_init+0x0/0x10c @ 1
[ 0.048912] initcall devfreq_init+0x0/0x10c returned 0 after 0 usecs
[ 0.048926] calling devfreq_event_init+0x0/0x80 @ 1
[ 0.048948] initcall devfreq_event_init+0x0/0x80 returned 0 after 0 usecs
[ 0.048959] calling devfreq_simple_ondemand_init+0x0/0x2c @ 1
[ 0.048970] initcall devfreq_simple_ondemand_init+0x0/0x2c returned 0 after 0 usecs
[ 0.048981] calling iio_init+0x0/0xb4 @ 1
[ 0.049022] initcall iio_init+0x0/0xb4 returned 0 after 0 usecs
[ 0.049034] calling arm_pmu_hp_init+0x0/0x70 @ 1
[ 0.049046] initcall arm_pmu_hp_init+0x0/0x70 returned 0 after 0 usecs
[ 0.049056] calling arm_pmu_acpi_init+0x0/0x1f0 @ 1
[ 0.049065] initcall arm_pmu_acpi_init+0x0/0x1f0 returned 0 after 0 usecs
[ 0.049075] calling ras_init+0x0/0x28 @ 1
[ 0.049093] initcall ras_init+0x0/0x28 returned 0 after 0 usecs
[ 0.049104] calling nvmem_init+0x0/0x30 @ 1
[ 0.049124] initcall nvmem_init+0x0/0x30 returned 0 after 0 usecs
[ 0.049135] calling fpga_mgr_class_init+0x0/0x88 @ 1
[ 0.049144] FPGA manager framework
[ 0.049155] initcall fpga_mgr_class_init+0x0/0x88 returned 0 after 0 usecs
[ 0.049166] calling tee_init+0x0/0xf4 @ 1
[ 0.049190] initcall tee_init+0x0/0xf4 returned 0 after 0 usecs
[ 0.049200] calling init_soundcore+0x0/0x6c @ 1
[ 0.049215] initcall init_soundcore+0x0/0x6c returned 0 after 0 usecs
[ 0.049225] calling alsa_sound_init+0x0/0xc8 @ 1
[ 0.049246] Advanced Linux Sound Architecture Driver Initialized.
[ 0.049254] initcall alsa_sound_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.049264] calling proto_init+0x0/0x2c @ 1
[ 0.049277] initcall proto_init+0x0/0x2c returned 0 after 0 usecs
[ 0.049287] calling net_dev_init+0x0/0x210 @ 1
[ 0.049472] initcall net_dev_init+0x0/0x210 returned 0 after 0 usecs
[ 0.049485] calling neigh_init+0x0/0xb4 @ 1
[ 0.049496] initcall neigh_init+0x0/0xb4 returned 0 after 0 usecs
[ 0.049506] calling fib_notifier_init+0x0/0x2c @ 1
[ 0.049518] initcall fib_notifier_init+0x0/0x2c returned 0 after 0 usecs
[ 0.049529] calling devlink_init+0x0/0x48 @ 1
[ 0.049586] initcall devlink_init+0x0/0x48 returned 0 after 0 usecs
[ 0.049598] calling ethnl_init+0x0/0x84 @ 1
[ 0.049627] initcall ethnl_init+0x0/0x84 returned 0 after 0 usecs
[ 0.049638] calling nexthop_init+0x0/0x104 @ 1
[ 0.049653] initcall nexthop_init+0x0/0x104 returned 0 after 0 usecs
[ 0.049664] calling watchdog_init+0x0/0xa0 @ 1
[ 0.049749] initcall watchdog_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.049821] calling create_debug_debugfs_entry+0x0/0x40 @ 1
[ 0.049841] initcall create_debug_debugfs_entry+0x0/0x40 returned 0 after 0 usecs
[ 0.049853] calling iomem_init_inode+0x0/0xbc @ 1
[ 0.049891] initcall iomem_init_inode+0x0/0xbc returned 0 after 0 usecs
[ 0.049903] calling clocksource_done_booting+0x0/0x68 @ 1
[ 0.049935] clocksource: Switched to clocksource arch_sys_counter
[ 0.049944] initcall clocksource_done_booting+0x0/0x68 returned 0 after 15 usecs
[ 0.049957] calling tracer_init_tracefs+0x0/0x2d4 @ 1
[ 0.072446] initcall tracer_init_tracefs+0x0/0x2d4 returned 0 after 21948 usecs
[ 0.072500] calling init_trace_printk_function_export+0x0/0x44 @ 1
[ 0.072519] initcall init_trace_printk_function_export+0x0/0x44 returned 0 after 5 usecs
[ 0.072533] calling init_graph_tracefs+0x0/0x44 @ 1
[ 0.072549] initcall init_graph_tracefs+0x0/0x44 returned 0 after 3 usecs
[ 0.072562] calling init_dynamic_event+0x0/0x54 @ 1
[ 0.072576] initcall init_dynamic_event+0x0/0x54 returned 0 after 3 usecs
[ 0.072589] calling init_uprobe_trace+0x0/0x80 @ 1
[ 0.072614] initcall init_uprobe_trace+0x0/0x80 returned 0 after 13 usecs
[ 0.072627] calling secretmem_init+0x0/0x40 @ 1
[ 0.072675] initcall secretmem_init+0x0/0x40 returned 0 after 34 usecs
[ 0.072687] calling init_pipe_fs+0x0/0x68 @ 1
[ 0.072723] initcall init_pipe_fs+0x0/0x68 returned 0 after 22 usecs
[ 0.072736] calling cgroup_writeback_init+0x0/0x4c @ 1
[ 0.072751] initcall cgroup_writeback_init+0x0/0x4c returned 0 after 4 usecs
[ 0.072762] calling inotify_user_setup+0x0/0xd8 @ 1
[ 0.072788] initcall inotify_user_setup+0x0/0xd8 returned 0 after 14 usecs
[ 0.072800] calling eventpoll_init+0x0/0xf4 @ 1
[ 0.072823] initcall eventpoll_init+0x0/0xf4 returned 0 after 12 usecs
[ 0.072835] calling anon_inode_init+0x0/0x78 @ 1
[ 0.072862] initcall anon_inode_init+0x0/0x78 returned 0 after 15 usecs
[ 0.072875] calling proc_locks_init+0x0/0x4c @ 1
[ 0.072892] initcall proc_locks_init+0x0/0x4c returned 0 after 5 usecs
[ 0.072903] calling iomap_init+0x0/0x38 @ 1
[ 0.072940] initcall iomap_init+0x0/0x38 returned 0 after 25 usecs
[ 0.072952] calling dquot_init+0x0/0x13c @ 1
[ 0.072963] VFS: Disk quotas dquot_6.6.0
[ 0.073000] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.073011] initcall dquot_init+0x0/0x13c returned 0 after 47 usecs
[ 0.073023] calling proc_cmdline_init+0x0/0x44 @ 1
[ 0.073037] initcall proc_cmdline_init+0x0/0x44 returned 0 after 2 usecs
[ 0.073049] calling proc_consoles_init+0x0/0x48 @ 1
[ 0.073063] initcall proc_consoles_init+0x0/0x48 returned 0 after 3 usecs
[ 0.073076] calling proc_cpuinfo_init+0x0/0x40 @ 1
[ 0.073088] initcall proc_cpuinfo_init+0x0/0x40 returned 0 after 1 usecs
[ 0.073100] calling proc_devices_init+0x0/0x48 @ 1
[ 0.073112] initcall proc_devices_init+0x0/0x48 returned 0 after 1 usecs
[ 0.073124] calling proc_interrupts_init+0x0/0x48 @ 1
[ 0.073137] initcall proc_interrupts_init+0x0/0x48 returned 0 after 1 usecs
[ 0.073149] calling proc_loadavg_init+0x0/0x44 @ 1
[ 0.073161] initcall proc_loadavg_init+0x0/0x44 returned 0 after 1 usecs
[ 0.073173] calling proc_meminfo_init+0x0/0x44 @ 1
[ 0.073185] initcall proc_meminfo_init+0x0/0x44 returned 0 after 1 usecs
[ 0.073197] calling proc_stat_init+0x0/0x40 @ 1
[ 0.073209] initcall proc_stat_init+0x0/0x40 returned 0 after 1 usecs
[ 0.073221] calling proc_uptime_init+0x0/0x44 @ 1
[ 0.073233] initcall proc_uptime_init+0x0/0x44 returned 0 after 1 usecs
[ 0.073245] calling proc_version_init+0x0/0x44 @ 1
[ 0.073257] initcall proc_version_init+0x0/0x44 returned 0 after 1 usecs
[ 0.073269] calling proc_softirqs_init+0x0/0x44 @ 1
[ 0.073281] initcall proc_softirqs_init+0x0/0x44 returned 0 after 1 usecs
[ 0.073293] calling vmcore_init+0x0/0x558 @ 1
[ 0.073304] initcall vmcore_init+0x0/0x558 returned 0 after 1 usecs
[ 0.073316] calling proc_kmsg_init+0x0/0x40 @ 1
[ 0.073328] initcall proc_kmsg_init+0x0/0x40 returned 0 after 1 usecs
[ 0.073340] calling proc_page_init+0x0/0x7c @ 1
[ 0.073354] initcall proc_page_init+0x0/0x7c returned 0 after 3 usecs
[ 0.073366] calling proc_boot_config_init+0x0/0xb0 @ 1
[ 0.073380] initcall proc_boot_config_init+0x0/0xb0 returned 0 after 2 usecs
[ 0.073392] calling init_ramfs_fs+0x0/0x2c @ 1
[ 0.073404] initcall init_ramfs_fs+0x0/0x2c returned 0 after 1 usecs
[ 0.073416] calling init_hugetlbfs_fs+0x0/0x13c @ 1
[ 0.073490] initcall init_hugetlbfs_fs+0x0/0x13c returned 0 after 63 usecs
[ 0.073502] calling blk_scsi_ioctl_init+0x0/0xb0 @ 1
[ 0.073513] initcall blk_scsi_ioctl_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.073523] calling acpi_event_init+0x0/0x54 @ 1
[ 0.073534] initcall acpi_event_init+0x0/0x54 returned 0 after 0 usecs
[ 0.073544] calling pnp_system_init+0x0/0x2c @ 1
[ 0.073584] initcall pnp_system_init+0x0/0x2c returned 0 after 28 usecs
[ 0.073596] calling pnpacpi_init+0x0/0x9c @ 1
[ 0.073606] pnp: PnP ACPI: disabled
[ 0.073612] initcall pnpacpi_init+0x0/0x9c returned 0 after 5 usecs
[ 0.073623] calling chr_dev_init+0x0/0xd4 @ 1
[ 0.080996] initcall chr_dev_init+0x0/0xd4 returned 0 after 7190 usecs
[ 0.081018] calling firmware_class_init+0x0/0xe8 @ 1
[ 0.081044] initcall firmware_class_init+0x0/0xe8 returned 0 after 14 usecs
[ 0.081056] calling sysctl_core_init+0x0/0x50 @ 1
[ 0.081097] initcall sysctl_core_init+0x0/0x50 returned 0 after 29 usecs
[ 0.081108] calling eth_offload_init+0x0/0x30 @ 1
[ 0.081118] initcall eth_offload_init+0x0/0x30 returned 0 after 0 usecs
[ 0.081129] calling ipv4_offload_init+0x0/0x90 @ 1
[ 0.081140] initcall ipv4_offload_init+0x0/0x90 returned 0 after 1 usecs
[ 0.081151] calling inet_init+0x0/0x258 @ 1
[ 0.081199] NET: Registered protocol family 2
[ 0.081504] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.081533] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.081628] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.081974] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.082076] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.082108] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.082197] initcall inet_init+0x0/0x258 returned 0 after 1010 usecs
[ 0.082218] calling af_unix_init+0x0/0x74 @ 1
[ 0.082237] NET: Registered protocol family 1
[ 0.082251] initcall af_unix_init+0x0/0x74 returned 0 after 20 usecs
[ 0.082264] calling ipv6_offload_init+0x0/0x94 @ 1
[ 0.082277] initcall ipv6_offload_init+0x0/0x94 returned 0 after 1 usecs
[ 0.082289] calling init_sunrpc+0x0/0x8c @ 1
[ 0.082608] RPC: Registered named UNIX socket transport module.
[ 0.082620] RPC: Registered udp transport module.
[ 0.082627] RPC: Registered tcp transport module.
[ 0.082634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.082641] initcall init_sunrpc+0x0/0x8c returned 0 after 333 usecs
[ 0.082655] calling pci_apply_final_quirks+0x0/0x170 @ 1
[ 0.082669] PCI: CLS 0 bytes, default 64
[ 0.082676] initcall pci_apply_final_quirks+0x0/0x170 returned 0 after 9 usecs
[ 0.082686] calling acpi_reserve_resources+0x0/0x104 @ 1
[ 0.082697] initcall acpi_reserve_resources+0x0/0x104 returned 0 after 0 usecs
[ 0.082708] calling populate_rootfs+0x0/0x13c @ 1
[ 0.082814] initcall populate_rootfs+0x0/0x13c returned 0 after 92 usecs
[ 0.082893] calling register_arm64_panic_block+0x0/0x38 @ 1
[ 0.082905] initcall register_arm64_panic_block+0x0/0x38 returned 0 after 0 usecs
[ 0.082917] calling cpuinfo_regs_init+0x0/0xe0 @ 1
[ 0.082984] initcall cpuinfo_regs_init+0x0/0xe0 returned 0 after 55 usecs
[ 0.082997] calling armv8_pmu_driver_init+0x0/0x4c @ 1
[ 0.083158] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.083338] initcall armv8_pmu_driver_init+0x0/0x4c returned 0 after 321 usecs
[ 0.083352] calling arch_init_uprobes+0x0/0x44 @ 1
[ 0.083364] initcall arch_init_uprobes+0x0/0x44 returned 0 after 0 usecs
[ 0.083375] calling arm_init+0x0/0x38 @ 1
[ 0.083392] kvm [1]: IPA Size Limit: 44 bits
[ 0.083925] kvm [1]: GICv3: no GICV resource entry
[ 0.083935] kvm [1]: disabling GICv2 emulation
[ 0.083954] kvm [1]: GIC system register CPU interface enabled
[ 0.083993] kvm [1]: vgic interrupt IRQ9
[ 0.084053] kvm [1]: Hyp mode initialized successfully
[ 0.084201] initcall arm_init+0x0/0x38 returned 0 after 794 usecs
[ 0.084216] calling cpu_feature_match_SHA1_init+0x0/0x4c @ 1
[ 0.084229] initcall cpu_feature_match_SHA1_init+0x0/0x4c returned -19 after 0 usecs
[ 0.084242] calling cpu_feature_match_SHA2_init+0x0/0x50 @ 1
[ 0.084253] initcall cpu_feature_match_SHA2_init+0x0/0x50 returned -19 after 0 usecs
[ 0.084266] calling ghash_ce_mod_init+0x0/0x60 @ 1
[ 0.084375] initcall ghash_ce_mod_init+0x0/0x60 returned 0 after 94 usecs
[ 0.084389] calling cpu_feature_match_AES_init+0x0/0x4c @ 1
[ 0.084400] initcall cpu_feature_match_AES_init+0x0/0x4c returned -19 after 0 usecs
[ 0.084413] calling aes_mod_init+0x0/0x44 @ 1
[ 0.084424] initcall aes_mod_init+0x0/0x44 returned -19 after 0 usecs
[ 0.084436] calling cpu_feature_match_AES_init+0x0/0xd8 @ 1
[ 0.084447] initcall cpu_feature_match_AES_init+0x0/0xd8 returned -19 after 0 usecs
[ 0.084459] calling sha256_mod_init+0x0/0x84 @ 1
[ 0.093974] initcall sha256_mod_init+0x0/0x84 returned 0 after 9281 usecs
[ 0.093994] calling aes_init+0x0/0x2c @ 1
[ 0.094062] initcall aes_init+0x0/0x2c returned 0 after 56 usecs
[ 0.094077] calling proc_execdomains_init+0x0/0x44 @ 1
[ 0.094093] initcall proc_execdomains_init+0x0/0x44 returned 0 after 4 usecs
[ 0.094105] calling register_warn_debugfs+0x0/0x44 @ 1
[ 0.094125] initcall register_warn_debugfs+0x0/0x44 returned 0 after 7 usecs
[ 0.094138] calling cpuhp_sysfs_init+0x0/0xc8 @ 1
[ 0.094170] initcall cpuhp_sysfs_init+0x0/0xc8 returned 0 after 20 usecs
[ 0.094183] calling ioresources_init+0x0/0x7c @ 1
[ 0.094196] initcall ioresources_init+0x0/0x7c returned 0 after 4 usecs
[ 0.094206] calling snapshot_device_init+0x0/0x2c @ 1
[ 0.094273] initcall snapshot_device_init+0x0/0x2c returned 0 after 56 usecs
[ 0.094285] calling irq_pm_init_ops+0x0/0x30 @ 1
[ 0.094295] initcall irq_pm_init_ops+0x0/0x30 returned 0 after 0 usecs
[ 0.094306] calling irq_debugfs_init+0x0/0xa8 @ 1
[ 0.094744] initcall irq_debugfs_init+0x0/0xa8 returned 0 after 418 usecs
[ 0.094757] calling timekeeping_init_ops+0x0/0x34 @ 1
[ 0.094769] initcall timekeeping_init_ops+0x0/0x34 returned 0 after 0 usecs
[ 0.094779] calling init_clocksource_sysfs+0x0/0x48 @ 1
[ 0.094846] initcall init_clocksource_sysfs+0x0/0x48 returned 0 after 54 usecs
[ 0.094860] calling init_timer_list_procfs+0x0/0x50 @ 1
[ 0.094873] initcall init_timer_list_procfs+0x0/0x50 returned 0 after 2 usecs
[ 0.094884] calling alarmtimer_init+0x0/0xc8 @ 1
[ 0.094945] initcall alarmtimer_init+0x0/0xc8 returned 0 after 49 usecs
[ 0.094957] calling init_posix_timers+0x0/0x48 @ 1
[ 0.094975] initcall init_posix_timers+0x0/0x48 returned 0 after 6 usecs
[ 0.094986] calling clockevents_init_sysfs+0x0/0xfc @ 1
[ 0.095073] initcall clockevents_init_sysfs+0x0/0xfc returned 0 after 75 usecs
[ 0.095088] calling sched_clock_syscore_init+0x0/0x34 @ 1
[ 0.095098] initcall sched_clock_syscore_init+0x0/0x34 returned 0 after 0 usecs
[ 0.095110] calling proc_modules_init+0x0/0x44 @ 1
[ 0.095123] initcall proc_modules_init+0x0/0x44 returned 0 after 2 usecs
[ 0.095135] calling kallsyms_init+0x0/0x40 @ 1
[ 0.095147] initcall kallsyms_init+0x0/0x40 returned 0 after 1 usecs
[ 0.095158] calling pid_namespaces_init+0x0/0x48 @ 1
[ 0.095185] initcall pid_namespaces_init+0x0/0x48 returned 0 after 15 usecs
[ 0.095197] calling ikconfig_init+0x0/0x64 @ 1
[ 0.095210] initcall ikconfig_init+0x0/0x64 returned 0 after 2 usecs
[ 0.095222] calling audit_watch_init+0x0/0x54 @ 1
[ 0.095233] initcall audit_watch_init+0x0/0x54 returned 0 after 0 usecs
[ 0.095244] calling audit_fsnotify_init+0x0/0x54 @ 1
[ 0.095257] initcall audit_fsnotify_init+0x0/0x54 returned 0 after 2 usecs
[ 0.095269] calling audit_tree_init+0x0/0x9c @ 1
[ 0.095282] initcall audit_tree_init+0x0/0x9c returned 0 after 2 usecs
[ 0.095294] calling seccomp_sysctl_init+0x0/0x44 @ 1
[ 0.095314] initcall seccomp_sysctl_init+0x0/0x44 returned 0 after 9 usecs
[ 0.095326] calling utsname_sysctl_init+0x0/0x30 @ 1
[ 0.095347] initcall utsname_sysctl_init+0x0/0x30 returned 0 after 9 usecs
[ 0.095358] calling init_tracepoints+0x0/0x50 @ 1
[ 0.095371] initcall init_tracepoints+0x0/0x50 returned 0 after 1 usecs
[ 0.095382] calling perf_event_sysfs_init+0x0/0xb8 @ 1
[ 0.095535] initcall perf_event_sysfs_init+0x0/0xb8 returned 0 after 137 usecs
[ 0.095550] calling system_trusted_keyring_init+0x0/0x78 @ 1
[ 0.095559] Initialise system trusted keyrings
[ 0.095573] initcall system_trusted_keyring_init+0x0/0x78 returned 0 after 12 usecs
[ 0.095584] calling kswapd_init+0x0/0x90 @ 1
[ 0.095674] initcall kswapd_init+0x0/0x90 returned 0 after 79 usecs
[ 0.095687] calling extfrag_debug_init+0x0/0x80 @ 1
[ 0.095709] initcall extfrag_debug_init+0x0/0x80 returned 0 after 12 usecs
[ 0.095719] calling mm_compute_batch_init+0x0/0x30 @ 1
[ 0.095729] initcall mm_compute_batch_init+0x0/0x30 returned 0 after 0 usecs
[ 0.095739] calling slab_proc_init+0x0/0x44 @ 1
[ 0.095751] initcall slab_proc_init+0x0/0x44 returned 0 after 3 usecs
[ 0.095762] calling workingset_init+0x0/0xc4 @ 1
[ 0.095771] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.095784] initcall workingset_init+0x0/0xc4 returned 0 after 13 usecs
[ 0.095795] calling proc_vmalloc_init+0x0/0x50 @ 1
[ 0.095806] initcall proc_vmalloc_init+0x0/0x50 returned 0 after 1 usecs
[ 0.095816] calling memblock_init_debugfs+0x0/0x90 @ 1
[ 0.095836] initcall memblock_init_debugfs+0x0/0x90 returned 0 after 9 usecs
[ 0.095847] calling procswaps_init+0x0/0x44 @ 1
[ 0.095859] initcall procswaps_init+0x0/0x44 returned 0 after 2 usecs
[ 0.095870] calling slab_sysfs_init+0x0/0x128 @ 1
[ 0.098572] initcall slab_sysfs_init+0x0/0x128 returned 0 after 2628 usecs
[ 0.098593] calling fcntl_init+0x0/0x48 @ 1
[ 0.098610] initcall fcntl_init+0x0/0x48 returned 0 after 5 usecs
[ 0.098621] calling proc_filesystems_init+0x0/0x44 @ 1
[ 0.098637] initcall proc_filesystems_init+0x0/0x44 returned 0 after 5 usecs
[ 0.098649] calling start_dirtytime_writeback+0x0/0x4c @ 1
[ 0.098664] initcall start_dirtytime_writeback+0x0/0x4c returned 0 after 3 usecs
[ 0.098676] calling blkdev_init+0x0/0x38 @ 1
[ 0.098699] initcall blkdev_init+0x0/0x38 returned 0 after 12 usecs
[ 0.098711] calling dio_init+0x0/0x48 @ 1
[ 0.098771] initcall dio_init+0x0/0x48 returned 0 after 49 usecs
[ 0.098784] calling dnotify_init+0x0/0x98 @ 1
[ 0.098837] initcall dnotify_init+0x0/0x98 returned 0 after 41 usecs
[ 0.098850] calling fanotify_user_setup+0x0/0xb4 @ 1
[ 0.098917] initcall fanotify_user_setup+0x0/0xb4 returned 0 after 54 usecs
[ 0.098930] calling aio_setup+0x0/0xa0 @ 1
[ 0.099022] initcall aio_setup+0x0/0xa0 returned 0 after 79 usecs
[ 0.099036] calling io_uring_init+0x0/0x4c @ 1
[ 0.099053] initcall io_uring_init+0x0/0x4c returned 0 after 5 usecs
[ 0.099065] calling mbcache_init+0x0/0x54 @ 1
[ 0.099115] initcall mbcache_init+0x0/0x54 returned 0 after 38 usecs
[ 0.099128] calling init_grace+0x0/0x2c @ 1
[ 0.099141] initcall init_grace+0x0/0x2c returned 0 after 2 usecs
[ 0.099152] calling init_devpts_fs+0x0/0x4c @ 1
[ 0.099179] initcall init_devpts_fs+0x0/0x4c returned 0 after 15 usecs
[ 0.099191] calling ext4_init_fs+0x0/0x1a8 @ 1
[ 0.099510] initcall ext4_init_fs+0x0/0x1a8 returned 0 after 300 usecs
[ 0.099524] calling init_ext2_fs+0x0/0x88 @ 1
[ 0.099568] initcall init_ext2_fs+0x0/0x88 returned 0 after 32 usecs
[ 0.099581] calling journal_init+0x0/0x13c @ 1
[ 0.099677] initcall journal_init+0x0/0x13c returned 0 after 82 usecs
[ 0.099691] calling init_squashfs_fs+0x0/0x94 @ 1
[ 0.099736] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.099744] initcall init_squashfs_fs+0x0/0x94 returned 0 after 40 usecs
[ 0.099756] calling init_fat_fs+0x0/0x6c @ 1
[ 0.099827] initcall init_fat_fs+0x0/0x6c returned 0 after 61 usecs
[ 0.099838] calling init_vfat_fs+0x0/0x2c @ 1
[ 0.099847] initcall init_vfat_fs+0x0/0x2c returned 0 after 1 usecs
[ 0.099857] calling init_nfs_fs+0x0/0x168 @ 1
[ 0.100196] initcall init_nfs_fs+0x0/0x168 returned 0 after 322 usecs
[ 0.100210] calling init_nfs_v2+0x0/0x30 @ 1
[ 0.100219] initcall init_nfs_v2+0x0/0x30 returned 0 after 0 usecs
[ 0.100229] calling init_nfs_v3+0x0/0x30 @ 1
[ 0.100237] initcall init_nfs_v3+0x0/0x30 returned 0 after 0 usecs
[ 0.100247] calling init_nfs_v4+0x0/0x6c @ 1
[ 0.100255] NFS: Registering the id_resolver key type
[ 0.100273] Key type id_resolver registered
[ 0.100280] Key type id_legacy registered
[ 0.100332] initcall init_nfs_v4+0x0/0x6c returned 0 after 74 usecs
[ 0.100344] calling nfs4filelayout_init+0x0/0x44 @ 1
[ 0.100353] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.100361] initcall nfs4filelayout_init+0x0/0x44 returned 0 after 8 usecs
[ 0.100371] calling init_nlm+0x0/0x8c @ 1
[ 0.100389] initcall init_nlm+0x0/0x8c returned 0 after 10 usecs
[ 0.100400] calling init_nls_cp437+0x0/0x30 @ 1
[ 0.100409] initcall init_nls_cp437+0x0/0x30 returned 0 after 0 usecs
[ 0.100419] calling init_nls_iso8859_1+0x0/0x30 @ 1
[ 0.100428] initcall init_nls_iso8859_1+0x0/0x30 returned 0 after 0 usecs
[ 0.100437] calling init_autofs_fs+0x0/0x48 @ 1
[ 0.100528] initcall init_autofs_fs+0x0/0x48 returned 0 after 80 usecs
[ 0.100540] calling init_v9fs+0x0/0x10c @ 1
[ 0.100549] 9p: Installing v9fs 9p2000 file system support
[ 0.100594] initcall init_v9fs+0x0/0x10c returned 0 after 44 usecs
[ 0.100606] calling efivarfs_init+0x0/0x3c @ 1
[ 0.100615] initcall efivarfs_init+0x0/0x3c returned -19 after 0 usecs
[ 0.100625] calling ipc_init+0x0/0x40 @ 1
[ 0.100646] initcall ipc_init+0x0/0x40 returned 0 after 12 usecs
[ 0.100657] calling ipc_sysctl_init+0x0/0x30 @ 1
[ 0.100679] initcall ipc_sysctl_init+0x0/0x30 returned 0 after 12 usecs
[ 0.100690] calling init_mqueue_fs+0x0/0x104 @ 1
[ 0.100772] initcall init_mqueue_fs+0x0/0x104 returned 0 after 71 usecs
[ 0.100785] calling key_proc_init+0x0/0x94 @ 1
[ 0.100798] initcall key_proc_init+0x0/0x94 returned 0 after 4 usecs
[ 0.100808] calling crypto_algapi_init+0x0/0x28 @ 1
[ 0.100820] initcall crypto_algapi_init+0x0/0x28 returned 0 after 2 usecs
[ 0.100830] calling jent_mod_init+0x0/0x4c @ 1
[ 0.130699] initcall jent_mod_init+0x0/0x4c returned 0 after 29159 usecs
[ 0.130714] calling asymmetric_key_init+0x0/0x2c @ 1
[ 0.130725] Key type asymmetric registered
[ 0.130731] initcall asymmetric_key_init+0x0/0x2c returned 0 after 7 usecs
[ 0.130742] calling x509_key_init+0x0/0x2c @ 1
[ 0.130751] Asymmetric key parser 'x509' registered
[ 0.130758] initcall x509_key_init+0x0/0x2c returned 0 after 7 usecs
[ 0.130768] calling proc_genhd_init+0x0/0x74 @ 1
[ 0.130782] initcall proc_genhd_init+0x0/0x74 returned 0 after 4 usecs
[ 0.130793] calling bsg_init+0x0/0x134 @ 1
[ 0.130816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.130825] initcall bsg_init+0x0/0x134 returned 0 after 22 usecs
[ 0.130835] calling deadline_init+0x0/0x2c @ 1
[ 0.130846] io scheduler mq-deadline registered
[ 0.130853] initcall deadline_init+0x0/0x2c returned 0 after 7 usecs
[ 0.130863] calling kyber_init+0x0/0x2c @ 1
[ 0.130873] io scheduler kyber registered
[ 0.130879] initcall kyber_init+0x0/0x2c returned 0 after 7 usecs
[ 0.130890] calling crc_t10dif_mod_init+0x0/0x5c @ 1
[ 0.130911] initcall crc_t10dif_mod_init+0x0/0x5c returned 0 after 11 usecs
[ 0.130922] calling percpu_counter_startup+0x0/0x74 @ 1
[ 0.130957] initcall percpu_counter_startup+0x0/0x74 returned 0 after 23 usecs
[ 0.130977] calling audit_classes_init+0x0/0xb8 @ 1
[ 0.130996] initcall audit_classes_init+0x0/0xb8 returned 0 after 7 usecs
[ 0.131008] calling sg_pool_init+0x0/0xf4 @ 1
[ 0.131105] initcall sg_pool_init+0x0/0xf4 returned 0 after 84 usecs
[ 0.131118] calling ls_scfg_msi_driver_init+0x0/0x34 @ 1
[ 0.131259] initcall ls_scfg_msi_driver_init+0x0/0x34 returned 0 after 125 usecs
[ 0.131273] calling sl28cpld_intc_driver_init+0x0/0x30 @ 1
[ 0.131322] initcall sl28cpld_intc_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.131336] calling brcm_gisb_driver_init+0x0/0x38 @ 1
[ 0.131415] initcall brcm_gisb_driver_init+0x0/0x38 returned -19 after 65 usecs
[ 0.131429] calling simple_pm_bus_driver_init+0x0/0x30 @ 1
[ 0.131478] initcall simple_pm_bus_driver_init+0x0/0x30 returned 0 after 36 usecs
[ 0.131493] calling vexpress_syscfg_driver_init+0x0/0x30 @ 1
[ 0.131529] initcall vexpress_syscfg_driver_init+0x0/0x30 returned 0 after 24 usecs
[ 0.131544] calling phy_core_init+0x0/0x78 @ 1
[ 0.131562] initcall phy_core_init+0x0/0x78 returned 0 after 6 usecs
[ 0.131574] calling xgene_phy_driver_init+0x0/0x30 @ 1
[ 0.131621] initcall xgene_phy_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.131634] calling imx8mq_usb_phy_driver_init+0x0/0x30 @ 1
[ 0.131690] initcall imx8mq_usb_phy_driver_init+0x0/0x30 returned 0 after 42 usecs
[ 0.131704] calling qcom_usb_hs_phy_driver_init+0x0/0x30 @ 1
[ 0.131725] initcall qcom_usb_hs_phy_driver_init+0x0/0x30 returned 0 after 9 usecs
[ 0.131738] calling samsung_usb2_phy_driver_init+0x0/0x30 @ 1
[ 0.131777] initcall samsung_usb2_phy_driver_init+0x0/0x30 returned 0 after 26 usecs
[ 0.131791] calling max77620_pinctrl_driver_init+0x0/0x30 @ 1
[ 0.131825] initcall max77620_pinctrl_driver_init+0x0/0x30 returned 0 after 21 usecs
[ 0.131839] calling pcs_driver_init+0x0/0x30 @ 1
[ 0.131915] initcall pcs_driver_init+0x0/0x30 returned 0 after 63 usecs
[ 0.131927] calling bgpio_driver_init+0x0/0x30 @ 1
[ 0.131987] initcall bgpio_driver_init+0x0/0x30 returned 0 after 47 usecs
[ 0.132000] calling dwapb_gpio_driver_init+0x0/0x30 @ 1
[ 0.132055] initcall dwapb_gpio_driver_init+0x0/0x30 returned 0 after 42 usecs
[ 0.132068] calling max77620_gpio_driver_init+0x0/0x30 @ 1
[ 0.132102] initcall max77620_gpio_driver_init+0x0/0x30 returned 0 after 21 usecs
[ 0.132116] calling mb86s70_gpio_driver_init+0x0/0x30 @ 1
[ 0.132163] initcall mb86s70_gpio_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.132177] calling pl061_gpio_driver_init+0x0/0x2c @ 1
[ 0.132200] initcall pl061_gpio_driver_init+0x0/0x2c returned 0 after 11 usecs
[ 0.132214] calling sl28cpld_gpio_driver_init+0x0/0x30 @ 1
[ 0.132271] initcall sl28cpld_gpio_driver_init+0x0/0x30 returned 0 after 44 usecs
[ 0.132285] calling xgene_gpio_driver_init+0x0/0x30 @ 1
[ 0.132332] initcall xgene_gpio_driver_init+0x0/0x30 returned 0 after 34 usecs
[ 0.132345] calling sl28cpld_pwm_driver_init+0x0/0x30 @ 1
[ 0.132392] initcall sl28cpld_pwm_driver_init+0x0/0x30 returned 0 after 34 usecs
[ 0.132406] calling pcie_portdrv_init+0x0/0x60 @ 1
[ 0.132471] initcall pcie_portdrv_init+0x0/0x60 returned 0 after 52 usecs
[ 0.132484] calling pci_proc_init+0x0/0xa0 @ 1
[ 0.132498] initcall pci_proc_init+0x0/0xa0 returned 0 after 5 usecs
[ 0.132508] calling pci_hotplug_init+0x0/0x18 @ 1
[ 0.132518] initcall pci_hotplug_init+0x0/0x18 returned 0 after 0 usecs
[ 0.132527] calling gen_pci_driver_init+0x0/0x30 @ 1
[ 0.132588] platform 1f0000000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.132614] initcall gen_pci_driver_init+0x0/0x30 returned 0 after 76 usecs
[ 0.132625] calling altera_pcie_driver_init+0x0/0x30 @ 1
[ 0.132676] initcall altera_pcie_driver_init+0x0/0x30 returned 0 after 40 usecs
[ 0.132687] calling ls_pcie_driver_init+0x0/0x38 @ 1
[ 0.132762] platform 3400000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.132777] platform 3500000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.132818] initcall ls_pcie_driver_init+0x0/0x38 returned -19 after 119 usecs
[ 0.132830] calling kirin_pcie_driver_init+0x0/0x34 @ 1
[ 0.132874] initcall kirin_pcie_driver_init+0x0/0x34 returned 0 after 33 usecs
[ 0.132885] calling hisi_pcie_almost_ecam_driver_init+0x0/0x30 @ 1
[ 0.132935] initcall hisi_pcie_almost_ecam_driver_init+0x0/0x30 returned 0 after 38 usecs
[ 0.132947] calling thunder_ecam_driver_init+0x0/0x30 @ 1
[ 0.132991] initcall thunder_ecam_driver_init+0x0/0x30 returned 0 after 33 usecs
[ 0.133002] calling thunder_pem_driver_init+0x0/0x30 @ 1
[ 0.133047] initcall thunder_pem_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.133059] calling xgene_pcie_driver_init+0x0/0x30 @ 1
[ 0.133102] initcall xgene_pcie_driver_init+0x0/0x30 returned 0 after 33 usecs
[ 0.133113] calling xenfb_init+0x0/0x5c @ 1
[ 0.133122] initcall xenfb_init+0x0/0x5c returned -19 after 0 usecs
[ 0.133132] calling efifb_driver_init+0x0/0x30 @ 1
[ 0.133162] initcall efifb_driver_init+0x0/0x30 returned 0 after 21 usecs
[ 0.133173] calling ged_driver_init+0x0/0x30 @ 1
[ 0.133208] initcall ged_driver_init+0x0/0x30 returned 0 after 24 usecs
[ 0.133219] calling acpi_ac_init+0x0/0xd0 @ 1
[ 0.133229] initcall acpi_ac_init+0x0/0xd0 returned -19 after 0 usecs
[ 0.133239] calling acpi_button_driver_init+0x0/0x84 @ 1
[ 0.133250] initcall acpi_button_driver_init+0x0/0x84 returned 0 after 0 usecs
[ 0.133261] calling acpi_fan_driver_init+0x0/0x30 @ 1
[ 0.133293] initcall acpi_fan_driver_init+0x0/0x30 returned 0 after 21 usecs
[ 0.133305] calling acpi_processor_driver_init+0x0/0xec @ 1
[ 0.133315] initcall acpi_processor_driver_init+0x0/0xec returned 0 after 0 usecs
[ 0.133327] calling acpi_thermal_init+0x0/0x9c @ 1
[ 0.133979] initcall acpi_thermal_init+0x0/0x9c returned -19 after 627 usecs
[ 0.133995] calling acpi_battery_init+0x0/0x5c @ 1
[ 0.134006] initcall acpi_battery_init+0x0/0x5c returned -19 after 0 usecs
[ 0.134017] calling acpi_hed_driver_init+0x0/0x30 @ 1
[ 0.134027] initcall acpi_hed_driver_init+0x0/0x30 returned -19 after 0 usecs
[ 0.134038] calling erst_init+0x0/0x2fc @ 1
[ 0.134048] initcall erst_init+0x0/0x2fc returned 0 after 0 usecs
[ 0.134058] calling ghes_init+0x0/0x118 @ 1
[ 0.134068] initcall ghes_init+0x0/0x118 returned -19 after 0 usecs
[ 0.134078] calling einj_init+0x0/0x4a8 @ 1
[ 0.134088] EINJ: ACPI disabled.
[ 0.134094] initcall einj_init+0x0/0x4a8 returned -19 after 5 usecs
[ 0.134105] calling gtdt_sbsa_gwdt_init+0x0/0x120 @ 1
[ 0.134116] initcall gtdt_sbsa_gwdt_init+0x0/0x120 returned 0 after 0 usecs
[ 0.134127] calling of_fixed_factor_clk_driver_init+0x0/0x30 @ 1
[ 0.134184] initcall of_fixed_factor_clk_driver_init+0x0/0x30 returned 0 after 44 usecs
[ 0.134198] calling of_fixed_clk_driver_init+0x0/0x30 @ 1
[ 0.134247] initcall of_fixed_clk_driver_init+0x0/0x30 returned 0 after 37 usecs
[ 0.134260] calling gpio_clk_driver_init+0x0/0x30 @ 1
[ 0.134314] initcall gpio_clk_driver_init+0x0/0x30 returned 0 after 41 usecs
[ 0.134326] calling cs2000_driver_init+0x0/0x30 @ 1
[ 0.134362] initcall cs2000_driver_init+0x0/0x30 returned 0 after 24 usecs
[ 0.134374] calling fsl_flexspi_clk_driver_init+0x0/0x30 @ 1
[ 0.134534] initcall fsl_flexspi_clk_driver_init+0x0/0x30 returned 0 after 145 usecs
[ 0.134550] calling fsl_sai_clk_driver_init+0x0/0x30 @ 1
[ 0.134600] initcall fsl_sai_clk_driver_init+0x0/0x30 returned 0 after 38 usecs
[ 0.134614] calling plldig_clk_driver_init+0x0/0x30 @ 1
[ 0.134716] initcall plldig_clk_driver_init+0x0/0x30 returned 0 after 88 usecs
[ 0.134731] calling clk_pwm_driver_init+0x0/0x30 @ 1
[ 0.134779] initcall clk_pwm_driver_init+0x0/0x30 returned 0 after 36 usecs
[ 0.134792] calling clockgen_cpufreq_init+0x0/0xac @ 1
[ 0.134858] initcall clockgen_cpufreq_init+0x0/0xac returned 0 after 54 usecs
[ 0.134872] calling rk808_clkout_driver_init+0x0/0x30 @ 1
[ 0.134910] initcall rk808_clkout_driver_init+0x0/0x30 returned 0 after 26 usecs
[ 0.134924] calling s2mps11_clk_driver_init+0x0/0x30 @ 1
[ 0.134960] initcall s2mps11_clk_driver_init+0x0/0x30 returned 0 after 24 usecs
[ 0.134973] calling scpi_clocks_driver_init+0x0/0x30 @ 1
[ 0.135021] initcall scpi_clocks_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.135035] calling mv_xor_v2_driver_init+0x0/0x30 @ 1
[ 0.135082] initcall mv_xor_v2_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.135095] calling pl330_driver_init+0x0/0x2c @ 1
[ 0.135118] initcall pl330_driver_init+0x0/0x2c returned 0 after 11 usecs
[ 0.135130] calling hidma_mgmt_init+0x0/0x1f0 @ 1
[ 0.135233] initcall hidma_mgmt_init+0x0/0x1f0 returned 0 after 89 usecs
[ 0.135245] calling hidma_driver_init+0x0/0x30 @ 1
[ 0.135304] initcall hidma_driver_init+0x0/0x30 returned 0 after 47 usecs
[ 0.135317] calling dpaa2_console_driver_init+0x0/0x30 @ 1
[ 0.135367] initcall dpaa2_console_driver_init+0x0/0x30 returned 0 after 37 usecs
[ 0.135380] calling virtio_mmio_init+0x0/0x30 @ 1
[ 0.135430] initcall virtio_mmio_init+0x0/0x30 returned 0 after 37 usecs
[ 0.135443] calling virtio_pci_driver_init+0x0/0x38 @ 1
[ 0.135473] initcall virtio_pci_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 0.135486] calling virtio_balloon_driver_init+0x0/0x2c @ 1
[ 0.135507] initcall virtio_balloon_driver_init+0x0/0x2c returned 0 after 8 usecs
[ 0.135520] calling xenbus_probe_initcall+0x0/0x44 @ 1
[ 0.135532] initcall xenbus_probe_initcall+0x0/0x44 returned 0 after 0 usecs
[ 0.135544] calling xenbus_init+0x0/0x60 @ 1
[ 0.135554] initcall xenbus_init+0x0/0x60 returned -19 after 0 usecs
[ 0.135566] calling xenbus_backend_init+0x0/0x6c @ 1
[ 0.135577] initcall xenbus_backend_init+0x0/0x6c returned -19 after 0 usecs
[ 0.135589] calling evtchn_init+0x0/0x70 @ 1
[ 0.135600] initcall evtchn_init+0x0/0x70 returned -19 after 0 usecs
[ 0.135612] calling gntdev_init+0x0/0x78 @ 1
[ 0.135623] initcall gntdev_init+0x0/0x78 returned -19 after 0 usecs
[ 0.135634] calling gntalloc_init+0x0/0x60 @ 1
[ 0.135645] initcall gntalloc_init+0x0/0x60 returned -19 after 0 usecs
[ 0.135657] calling xenfs_init+0x0/0x40 @ 1
[ 0.135668] initcall xenfs_init+0x0/0x40 returned 0 after 0 usecs
[ 0.135679] calling hyper_sysfs_init+0x0/0x134 @ 1
[ 0.135691] initcall hyper_sysfs_init+0x0/0x134 returned -19 after 0 usecs
[ 0.135702] calling hypervisor_subsys_init+0x0/0x40 @ 1
[ 0.135714] initcall hypervisor_subsys_init+0x0/0x40 returned -19 after 0 usecs
[ 0.135727] calling privcmd_init+0x0/0x90 @ 1
[ 0.135738] initcall privcmd_init+0x0/0x90 returned -19 after 0 usecs
[ 0.135750] calling axp20x_regulator_driver_init+0x0/0x30 @ 1
[ 0.135783] initcall axp20x_regulator_driver_init+0x0/0x30 returned 0 after 23 usecs
[ 0.135795] calling bd718xx_regulator_init+0x0/0x30 @ 1
[ 0.135828] initcall bd718xx_regulator_init+0x0/0x30 returned 0 after 23 usecs
[ 0.135839] calling bd9571mwv_regulator_driver_init+0x0/0x30 @ 1
[ 0.135872] initcall bd9571mwv_regulator_driver_init+0x0/0x30 returned 0 after 22 usecs
[ 0.135884] calling fan53555_regulator_driver_init+0x0/0x30 @ 1
[ 0.135914] initcall fan53555_regulator_driver_init+0x0/0x30 returned 0 after 20 usecs
[ 0.135926] calling hi6421v530_regulator_driver_init+0x0/0x30 @ 1
[ 0.135962] initcall hi6421v530_regulator_driver_init+0x0/0x30 returned 0 after 25 usecs
[ 0.135974] calling max77620_regulator_driver_init+0x0/0x30 @ 1
[ 0.136008] initcall max77620_regulator_driver_init+0x0/0x30 returned 0 after 23 usecs
[ 0.136020] calling qcom_spmi_regulator_driver_init+0x0/0x30 @ 1
[ 0.136114] initcall qcom_spmi_regulator_driver_init+0x0/0x30 returned 0 after 82 usecs
[ 0.136126] calling pfuze_driver_init+0x0/0x30 @ 1
[ 0.136153] initcall pfuze_driver_init+0x0/0x30 returned 0 after 17 usecs
[ 0.136164] calling pwm_regulator_driver_init+0x0/0x30 @ 1
[ 0.136210] initcall pwm_regulator_driver_init+0x0/0x30 returned 0 after 36 usecs
[ 0.136221] calling rk808_regulator_driver_init+0x0/0x30 @ 1
[ 0.136256] initcall rk808_regulator_driver_init+0x0/0x30 returned 0 after 25 usecs
[ 0.136268] calling s2mps11_pmic_driver_init+0x0/0x30 @ 1
[ 0.136303] initcall s2mps11_pmic_driver_init+0x0/0x30 returned 0 after 25 usecs
[ 0.136314] calling brcm_rescal_reset_driver_init+0x0/0x30 @ 1
[ 0.136360] initcall brcm_rescal_reset_driver_init+0x0/0x30 returned 0 after 35 usecs
[ 0.136372] calling n_null_init+0x0/0x38 @ 1
[ 0.136382] initcall n_null_init+0x0/0x38 returned 0 after 0 usecs
[ 0.136391] calling pty_init+0x0/0x380 @ 1
[ 0.137691] initcall pty_init+0x0/0x380 returned 0 after 1260 usecs
[ 0.137707] calling sysrq_init+0x0/0x90 @ 1
[ 0.137730] initcall sysrq_init+0x0/0x90 returned 0 after 14 usecs
[ 0.137741] calling xen_hvc_init+0x0/0x298 @ 1
[ 0.137750] initcall xen_hvc_init+0x0/0x298 returned -19 after 0 usecs
[ 0.137760] calling serial8250_init+0x0/0x16c @ 1
[ 0.137770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.138357] initcall serial8250_init+0x0/0x16c returned 0 after 573 usecs
[ 0.138372] calling serial_pci_driver_init+0x0/0x38 @ 1
[ 0.138412] initcall serial_pci_driver_init+0x0/0x38 returned 0 after 30 usecs
[ 0.138424] calling exar_pci_driver_init+0x0/0x38 @ 1
[ 0.138447] initcall exar_pci_driver_init+0x0/0x38 returned 0 after 13 usecs
[ 0.138458] calling fsl8250_platform_driver_init+0x0/0x30 @ 1
[ 0.138496] initcall fsl8250_platform_driver_init+0x0/0x30 returned 0 after 26 usecs
[ 0.138508] calling dw8250_platform_driver_init+0x0/0x30 @ 1
[ 0.138581] initcall dw8250_platform_driver_init+0x0/0x30 returned 0 after 62 usecs
[ 0.138594] calling of_platform_serial_driver_init+0x0/0x30 @ 1
[ 0.138869] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 24, base_baud = 12500000) is a 16550A
[ 7.542134] printk: console [ttyS0] enabled
[ 7.546792] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 24, base_baud = 12500000) is a 16550A
[ 7.555855] initcall of_platform_serial_driver_init+0x0/0x30 returned 0 after 7243409 usecs
[ 7.564262] calling lpuart_serial_init+0x0/0x6c @ 1
[ 7.569323] platform 2270000.serial: probe deferral - supplier 22c0000.dma-controller not ready
[ 7.578109] initcall lpuart_serial_init+0x0/0x6c returned 0 after 8648 usecs
[ 7.585195] calling init+0x0/0x124 @ 1
[ 7.589089] initcall init+0x0/0x124 returned 0 after 37 usecs
[ 7.594864] calling tpm_tis_i2c_driver_init+0x0/0x30 @ 1
[ 7.600318] initcall tpm_tis_i2c_driver_init+0x0/0x30 returned 0 after 28 usecs
[ 7.607664] calling arm_smmu_driver_init+0x0/0x30 @ 1
[ 7.613346] arm-smmu 5000000.iommu: probing hardware configuration...
[ 7.619819] arm-smmu 5000000.iommu: SMMUv2 with:
[ 7.624460] arm-smmu 5000000.iommu: stage 1 translation
[ 7.629795] arm-smmu 5000000.iommu: stage 2 translation
[ 7.635130] arm-smmu 5000000.iommu: nested translation
[ 7.640379] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 7.647549] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 7.654108] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 7.660577] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 7.667047] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 7.673805] initcall arm_smmu_driver_init+0x0/0x30 returned 0 after 59547 usecs
[ 7.681153] calling arm_smmu_driver_init+0x0/0x34 @ 1
[ 7.686361] initcall arm_smmu_driver_init+0x0/0x34 returned 0 after 40 usecs
[ 7.693445] calling drm_kms_helper_init+0x0/0x2c @ 1
[ 7.698522] initcall drm_kms_helper_init+0x0/0x2c returned 0 after 0 usecs
[ 7.705428] calling drm_core_init+0x0/0xc8 @ 1
[ 7.710000] initcall drm_core_init+0x0/0xc8 returned 0 after 18 usecs
[ 7.716474] calling topology_sysfs_init+0x0/0x48 @ 1
[ 7.721584] initcall topology_sysfs_init+0x0/0x48 returned 0 after 33 usecs
[ 7.728581] calling cacheinfo_sysfs_init+0x0/0x48 @ 1
[ 7.733885] initcall cacheinfo_sysfs_init+0x0/0x48 returned 0 after 137 usecs
[ 7.741061] calling devcoredump_init+0x0/0x38 @ 1
[ 7.745885] initcall devcoredump_init+0x0/0x38 returned 0 after 10 usecs
[ 7.752624] calling loop_init+0x0/0x160 @ 1
[ 7.760873] loop: module loaded
[ 7.764056] initcall loop_init+0x0/0x160 returned 0 after 6972 usecs
[ 7.770451] calling init+0x0/0xac @ 1
[ 7.774255] initcall init+0x0/0xac returned 0 after 35 usecs
[ 7.779944] calling xlblk_init+0x0/0x158 @ 1
[ 7.784323] initcall xlblk_init+0x0/0x158 returned -19 after 0 usecs
[ 7.790708] calling at24_init+0x0/0x6c @ 1
[ 7.795017] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.801466] at24 0-0050: Linked as a consumer to regulator.0
[ 7.807945] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 7.814852] at24 1-0057: supply vcc not found, using dummy regulator
[ 7.821300] at24 1-0057: Linked as a consumer to regulator.0
[ 7.827752] at24 1-0057: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 7.834649] at24 2-0050: supply vcc not found, using dummy regulator
[ 7.841114] at24 2-0050: Linked as a consumer to regulator.0
[ 7.847564] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 7.854427] initcall at24_init+0x0/0x6c returned 0 after 58118 usecs
[ 7.860825] calling at25_driver_init+0x0/0x30 @ 1
[ 7.865655] initcall at25_driver_init+0x0/0x30 returned 0 after 11 usecs
[ 7.872392] calling bd9571mwv_driver_init+0x0/0x30 @ 1
[ 7.877668] initcall bd9571mwv_driver_init+0x0/0x30 returned 0 after 21 usecs
[ 7.884840] calling cros_ec_dev_init+0x0/0x94 @ 1
[ 7.889733] initcall cros_ec_dev_init+0x0/0x94 returned 0 after 76 usecs
[ 7.896470] calling axp20x_i2c_driver_init+0x0/0x30 @ 1
[ 7.901831] initcall axp20x_i2c_driver_init+0x0/0x30 returned 0 after 22 usecs
[ 7.909090] calling max77620_driver_init+0x0/0x30 @ 1
[ 7.914270] initcall max77620_driver_init+0x0/0x30 returned 0 after 15 usecs
[ 7.921354] calling rk808_i2c_driver_init+0x0/0x30 @ 1
[ 7.926625] initcall rk808_i2c_driver_init+0x0/0x30 returned 0 after 20 usecs
[ 7.933796] calling vexpress_sysreg_driver_init+0x0/0x30 @ 1
[ 7.939630] initcall vexpress_sysreg_driver_init+0x0/0x30 returned 0 after 54 usecs
[ 7.947326] calling hi6421_pmic_driver_init+0x0/0x30 @ 1
[ 7.952799] initcall hi6421_pmic_driver_init+0x0/0x30 returned 0 after 44 usecs
[ 7.960146] calling simple_mfd_i2c_driver_init+0x0/0x30 @ 1
[ 7.966642] platform leds: Linked as a sync state only consumer to 2000000.i2c:sl28cpld@4a:gpio@10
[ 7.975682] platform 2000000.i2c:sl28cpld@4a:gpio@10: Linked as a consumer to 2310000.gpio
[ 7.989839] platform leds: Linked as a sync state only consumer to 2000000.i2c:sl28cpld@4a:gpio@15
[ 7.998885] platform 2000000.i2c:sl28cpld@4a:gpio@15: Linked as a consumer to 2310000.gpio
[ 8.013134] platform buttons1: Linked as a sync state only consumer to 2000000.i2c:sl28cpld@4a:gpio@1b
[ 8.022758] platform buttons0: Linked as a sync state only consumer to 2000000.i2c:sl28cpld@4a:interrupt-controller@1c
[ 8.033540] platform 2000000.i2c:sl28cpld@4a:interrupt-controller@1c: Linked as a consumer to 2310000.gpio
[ 8.044098] initcall simple_mfd_i2c_driver_init+0x0/0x30 returned 0 after 76429 usecs
[ 8.051995] calling sas_transport_init+0x0/0xc8 @ 1
[ 8.057034] initcall sas_transport_init+0x0/0xc8 returned 0 after 42 usecs
[ 8.063961] calling sas_class_init+0x0/0x94 @ 1
[ 8.068620] initcall sas_class_init+0x0/0x94 returned 0 after 15 usecs
[ 8.075181] calling ufshcd_core_init+0x0/0x28 @ 1
[ 8.080002] initcall ufshcd_core_init+0x0/0x28 returned 0 after 6 usecs
[ 8.086650] calling init_sd+0x0/0x1a4 @ 1
[ 8.090805] initcall init_sd+0x0/0x1a4 returned 0 after 37 usecs
[ 8.096843] calling hisi_sas_init+0x0/0x98 @ 1
[ 8.101400] initcall hisi_sas_init+0x0/0x98 returned 0 after 3 usecs
[ 8.107785] calling hisi_sas_v1_driver_init+0x0/0x30 @ 1
[ 8.113304] initcall hisi_sas_v1_driver_init+0x0/0x30 returned 0 after 91 usecs
[ 8.120651] calling hisi_sas_v2_driver_init+0x0/0x30 @ 1
[ 8.126133] initcall hisi_sas_v2_driver_init+0x0/0x30 returned 0 after 52 usecs
[ 8.133480] calling sas_v3_pci_driver_init+0x0/0x38 @ 1
[ 8.138856] initcall sas_v3_pci_driver_init+0x0/0x38 returned 0 after 38 usecs
[ 8.146117] calling ahci_pci_driver_init+0x0/0x38 @ 1
[ 8.151298] initcall ahci_pci_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 8.158383] calling ahci_driver_init+0x0/0x30 @ 1
[ 8.163275] initcall ahci_driver_init+0x0/0x30 returned 0 after 75 usecs
[ 8.170010] calling sil24_pci_driver_init+0x0/0x38 @ 1
[ 8.175279] initcall sil24_pci_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 8.182452] calling ceva_ahci_driver_init+0x0/0x30 @ 1
[ 8.187751] initcall ceva_ahci_driver_init+0x0/0x30 returned 0 after 44 usecs
[ 8.194923] calling xgene_ahci_driver_init+0x0/0x30 @ 1
[ 8.200316] initcall xgene_ahci_driver_init+0x0/0x30 returned 0 after 53 usecs
[ 8.207576] calling ahci_qoriq_driver_init+0x0/0x30 @ 1
[ 8.213015] ahci-qoriq 3200000.sata: Adding to iommu group 0
[ 8.218831] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator
[ 8.226431] ahci-qoriq 3200000.sata: Linked as a consumer to regulator.0
[ 8.233171] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator
[ 8.240633] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator
[ 8.248414] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 8.257423] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
[ 8.267588] scsi host0: ahci-qoriq
[ 8.271166] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 31
[ 8.279248] initcall ahci_qoriq_driver_init+0x0/0x30 returned 0 after 64780 usecs
[ 8.286781] calling pata_platform_driver_init+0x0/0x30 @ 1
[ 8.292434] initcall pata_platform_driver_init+0x0/0x30 returned 0 after 49 usecs
[ 8.299956] calling pata_of_platform_driver_init+0x0/0x30 @ 1
[ 8.305871] initcall pata_of_platform_driver_init+0x0/0x30 returned 0 after 52 usecs
[ 8.313659] calling init_mtd+0x0/0x138 @ 1
[ 8.317945] initcall init_mtd+0x0/0x138 returned 0 after 79 usecs
[ 8.324075] calling ofpart_parser_init+0x0/0x4c @ 1
[ 8.329066] initcall ofpart_parser_init+0x0/0x4c returned 0 after 0 usecs
[ 8.335888] calling init_mtdblock+0x0/0x2c @ 1
[ 8.340444] initcall init_mtdblock+0x0/0x2c returned 0 after 3 usecs
[ 8.346829] calling denali_dt_driver_init+0x0/0x30 @ 1
[ 8.352143] initcall denali_dt_driver_init+0x0/0x30 returned 0 after 63 usecs
[ 8.359317] calling spi_nor_driver_init+0x0/0x30 @ 1
[ 8.364408] initcall spi_nor_driver_init+0x0/0x30 returned 0 after 14 usecs
[ 8.371409] calling fsl_dspi_driver_init+0x0/0x30 @ 1
[ 8.376611] platform 2120000.spi: probe deferral - supplier 22c0000.dma-controller not ready
[ 8.385166] initcall fsl_dspi_driver_init+0x0/0x30 returned 0 after 8391 usecs
[ 8.392426] calling nxp_fspi_driver_init+0x0/0x30 @ 1
[ 8.397950] spi-nor spi0.0: w25q32dw (4096 Kbytes)
[ 8.403027] 8 fixed-partitions partitions found on MTD device 20c0000.spi
[ 8.409854] Creating 8 MTD partitions on "20c0000.spi":
[ 8.415115] 0x000000000000-0x000000010000 : "rcw"
[ 8.422337] 0x000000010000-0x000000100000 : "failsafe bootloader"
[ 8.430296] 0x000000100000-0x000000140000 : "failsafe DP firmware"
[ 8.438280] 0x000000140000-0x0000001e0000 : "failsafe trusted firmware"
[ 8.446296] 0x0000001e0000-0x000000200000 : "reserved"
[ 8.454284] 0x000000200000-0x000000210000 : "configuration store"
[ 8.462302] 0x000000210000-0x0000003e0000 : "bootloader"
[ 8.470291] 0x0000003e0000-0x000000400000 : "bootloader environment"
[ 8.478423] initcall nxp_fspi_driver_init+0x0/0x30 returned 0 after 78937 usecs
[ 8.485790] calling rockchip_spi_driver_init+0x0/0x30 @ 1
[ 8.491433] initcall rockchip_spi_driver_init+0x0/0x30 returned 0 after 124 usecs
[ 8.498956] calling net_olddevs_init+0x0/0xa0 @ 1
[ 8.503778] initcall net_olddevs_init+0x0/0xa0 returned 0 after 6 usecs
[ 8.510429] calling blackhole_netdev_init+0x0/0x9c @ 1
[ 8.515692] initcall blackhole_netdev_init+0x0/0x9c returned 0 after 11 usecs
[ 8.522865] calling phy_module_init+0x0/0x34 @ 1
[ 8.527645] initcall phy_module_init+0x0/0x34 returned 0 after 51 usecs
[ 8.534295] calling phy_module_init+0x0/0x34 @ 1
[ 8.539036] initcall phy_module_init+0x0/0x34 returned 0 after 13 usecs
[ 8.545683] calling fixed_mdio_bus_init+0x0/0x124 @ 1
[ 8.551098] libphy: Fixed MDIO Bus: probed
[ 8.555213] initcall fixed_mdio_bus_init+0x0/0x124 returned 0 after 4264 usecs
[ 8.562472] calling phy_module_init+0x0/0x34 @ 1
[ 8.567335] initcall phy_module_init+0x0/0x34 returned 0 after 132 usecs
[ 8.574076] calling phy_module_init+0x0/0x34 @ 1
[ 8.578944] initcall phy_module_init+0x0/0x34 returned 0 after 136 usecs
[ 8.585679] calling phy_module_init+0x0/0x34 @ 1
[ 8.590415] initcall phy_module_init+0x0/0x34 returned 0 after 10 usecs
[ 8.597062] calling thunder_mdiobus_driver_init+0x0/0x38 @ 1
[ 8.600144] ata1: SATA link down (SStatus 0 SControl 300)
[ 8.602874] initcall thunder_mdiobus_driver_init+0x0/0x38 returned 0 after 36 usecs
[ 8.615949] calling mdio_mux_mmioreg_driver_init+0x0/0x30 @ 1
[ 8.621877] initcall mdio_mux_mmioreg_driver_init+0x0/0x30 returned 0 after 64 usecs
[ 8.629661] calling tun_init+0x0/0xd4 @ 1
[ 8.633777] tun: Universal TUN/TAP device driver, 1.6
[ 8.638936] initcall tun_init+0x0/0xd4 returned 0 after 5038 usecs
[ 8.645152] calling virtio_net_driver_init+0x0/0xc0 @ 1
[ 8.650507] initcall virtio_net_driver_init+0x0/0xc0 returned 0 after 17 usecs
[ 8.657767] calling can_dev_init+0x0/0x44 @ 1
[ 8.662233] CAN device driver interface
[ 8.666082] initcall can_dev_init+0x0/0x44 returned 0 after 3759 usecs
[ 8.672640] calling flexcan_driver_init+0x0/0x30 @ 1
[ 8.678221] initcall flexcan_driver_init+0x0/0x30 returned 0 after 493 usecs
[ 8.685314] calling felix_vsc9959_pci_driver_init+0x0/0x38 @ 1
[ 8.691298] initcall felix_vsc9959_pci_driver_init+0x0/0x38 returned 0 after 30 usecs
[ 8.699173] calling xgbe_mod_init+0x0/0x68 @ 1
[ 8.703804] initcall xgbe_mod_init+0x0/0x68 returned 0 after 74 usecs
[ 8.710279] calling macb_driver_init+0x0/0x30 @ 1
[ 8.715236] initcall macb_driver_init+0x0/0x30 returned 0 after 138 usecs
[ 8.722060] calling xcv_init_module+0x0/0x5c @ 1
[ 8.726788] thunder_xcv, ver 1.0
[ 8.730046] initcall xcv_init_module+0x0/0x5c returned 0 after 3182 usecs
[ 8.736869] calling bgx_init_module+0x0/0x5c @ 1
[ 8.741596] thunder_bgx, ver 1.0
[ 8.744858] initcall bgx_init_module+0x0/0x5c returned 0 after 3184 usecs
[ 8.751680] calling nic_init_module+0x0/0x5c @ 1
[ 8.756407] nicpf, ver 1.0
[ 8.759144] initcall nic_init_module+0x0/0x5c returned 0 after 2673 usecs
[ 8.765969] calling enetc_pf_driver_init+0x0/0x38 @ 1
[ 8.771149] initcall enetc_pf_driver_init+0x0/0x38 returned 0 after 15 usecs
[ 8.778234] calling enetc_pci_mdio_driver_init+0x0/0x38 @ 1
[ 8.783937] initcall enetc_pci_mdio_driver_init+0x0/0x38 returned 0 after 16 usecs
[ 8.791546] calling hix5hd2_dev_driver_init+0x0/0x30 @ 1
[ 8.797043] initcall hix5hd2_dev_driver_init+0x0/0x30 returned 0 after 70 usecs
[ 8.804391] calling hns_mdio_driver_init+0x0/0x30 @ 1
[ 8.809611] initcall hns_mdio_driver_init+0x0/0x30 returned 0 after 54 usecs
[ 8.816697] calling g_dsaf_driver_init+0x0/0x30 @ 1
[ 8.821740] initcall g_dsaf_driver_init+0x0/0x30 returned 0 after 50 usecs
[ 8.828650] calling hns_nic_dev_driver_init+0x0/0x30 @ 1
[ 8.834145] initcall hns_nic_dev_driver_init+0x0/0x30 returned 0 after 62 usecs
[ 8.841495] calling hclge_init+0x0/0x8c @ 1
[ 8.845790] hclge is initializing
[ 8.849126] initcall hclge_init+0x0/0x8c returned 0 after 3258 usecs
[ 8.855511] calling hns3_init_module+0x0/0xe4 @ 1
[ 8.860326] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 8.867580] hns3: Copyright (c) 2017 Huawei Corporation.
[ 8.872943] initcall hns3_init_module+0x0/0xe4 returned 0 after 12321 usecs
[ 8.879946] calling igb_init_module+0x0/0x68 @ 1
[ 8.884674] igb: Intel(R) Gigabit Ethernet Network Driver
[ 8.890094] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 8.895706] initcall igb_init_module+0x0/0x68 returned 0 after 10773 usecs
[ 8.902616] calling orion_mdio_driver_init+0x0/0x30 @ 1
[ 8.908007] initcall orion_mdio_driver_init+0x0/0x30 returned 0 after 52 usecs
[ 8.915268] calling sky2_init_module+0x0/0x44 @ 1
[ 8.920082] sky2: driver version 1.30
[ 8.923778] initcall sky2_init_module+0x0/0x44 returned 0 after 3609 usecs
[ 8.930688] calling mscc_ocelot_driver_init+0x0/0x30 @ 1
[ 8.936161] initcall mscc_ocelot_driver_init+0x0/0x30 returned 0 after 46 usecs
[ 8.943511] calling rtl8169_pci_driver_init+0x0/0x38 @ 1
[ 8.948953] initcall rtl8169_pci_driver_init+0x0/0x38 returned 0 after 14 usecs
[ 8.956300] calling smc_driver_init+0x0/0x30 @ 1
[ 8.961080] initcall smc_driver_init+0x0/0x30 returned 0 after 51 usecs
[ 8.967729] calling smsc911x_init_module+0x0/0x30 @ 1
[ 8.972937] initcall smsc911x_init_module+0x0/0x30 returned 0 after 43 usecs
[ 8.980023] calling stmmac_init+0x0/0x60 @ 1
[ 8.984408] initcall stmmac_init+0x0/0x60 returned 0 after 6 usecs
[ 8.990623] calling netif_init+0x0/0x7c @ 1
[ 8.994915] initcall netif_init+0x0/0x7c returned -19 after 0 usecs
[ 9.001213] calling net_failover_init+0x0/0x18 @ 1
[ 9.006118] initcall net_failover_init+0x0/0x18 returned 0 after 0 usecs
[ 9.012853] calling vfio_init+0x0/0x18c @ 1
[ 9.017232] VFIO - User Level meta-driver version: 0.3
[ 9.022396] initcall vfio_init+0x0/0x18c returned 0 after 5128 usecs
[ 9.028782] calling vfio_virqfd_init+0x0/0x54 @ 1
[ 9.033691] initcall vfio_virqfd_init+0x0/0x54 returned 0 after 92 usecs
[ 9.040439] calling vfio_iommu_type1_init+0x0/0x2c @ 1
[ 9.045696] initcall vfio_iommu_type1_init+0x0/0x2c returned 0 after 1 usecs
[ 9.052783] calling vfio_pci_init+0x0/0x198 @ 1
[ 9.057463] initcall vfio_pci_init+0x0/0x198 returned 0 after 38 usecs
[ 9.064026] calling usb_conn_driver_init+0x0/0x30 @ 1
[ 9.069257] initcall usb_conn_driver_init+0x0/0x30 returned 0 after 64 usecs
[ 9.076343] calling dwc3_driver_init+0x0/0x30 @ 1
[ 9.081236] dwc3 3100000.usb: Adding to iommu group 1
[ 9.086752] dwc3 3110000.usb: Adding to iommu group 2
[ 9.092203] initcall dwc3_driver_init+0x0/0x30 returned 0 after 10785 usecs
[ 9.099211] calling dwc3_pci_driver_init+0x0/0x38 @ 1
[ 9.104411] initcall dwc3_pci_driver_init+0x0/0x38 returned 0 after 33 usecs
[ 9.111496] calling dwc3_haps_driver_init+0x0/0x38 @ 1
[ 9.116765] initcall dwc3_haps_driver_init+0x0/0x38 returned 0 after 15 usecs
[ 9.123940] calling dwc3_of_simple_driver_init+0x0/0x30 @ 1
[ 9.129729] initcall dwc3_of_simple_driver_init+0x0/0x30 returned 0 after 98 usecs
[ 9.137338] calling dwc2_platform_driver_init+0x0/0x30 @ 1
[ 9.143083] initcall dwc2_platform_driver_init+0x0/0x30 returned 0 after 140 usecs
[ 9.150697] calling isp1760_init+0x0/0x7c @ 1
[ 9.155383] initcall isp1760_init+0x0/0x7c returned 0 after 213 usecs
[ 9.161860] calling ehci_hcd_init+0x0/0xa8 @ 1
[ 9.166415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.172971] initcall ehci_hcd_init+0x0/0xa8 returned 0 after 6402 usecs
[ 9.179618] calling ehci_pci_init+0x0/0x98 @ 1
[ 9.184171] ehci-pci: EHCI PCI platform driver
[ 9.188648] initcall ehci_pci_init+0x0/0x98 returned 0 after 4372 usecs
[ 9.195298] calling ehci_platform_init+0x0/0x70 @ 1
[ 9.200289] ehci-platform: EHCI generic platform driver
[ 9.205603] initcall ehci_platform_init+0x0/0x70 returned 0 after 5189 usecs
[ 9.212692] calling ohci_hcd_mod_init+0x0/0xb0 @ 1
[ 9.217596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.223810] initcall ohci_hcd_mod_init+0x0/0xb0 returned 0 after 6068 usecs
[ 9.230809] calling ohci_pci_init+0x0/0x98 @ 1
[ 9.235362] ohci-pci: OHCI PCI platform driver
[ 9.239840] initcall ohci_pci_init+0x0/0x98 returned 0 after 4373 usecs
[ 9.246497] calling ohci_platform_init+0x0/0x70 @ 1
[ 9.251488] ohci-platform: OHCI generic platform driver
[ 9.256799] initcall ohci_platform_init+0x0/0x70 returned 0 after 5185 usecs
[ 9.263884] calling xhci_hcd_init+0x0/0x44 @ 1
[ 9.268441] initcall xhci_hcd_init+0x0/0x44 returned 0 after 4 usecs
[ 9.274829] calling xhci_pci_init+0x0/0x78 @ 1
[ 9.279400] initcall xhci_pci_init+0x0/0x78 returned 0 after 18 usecs
[ 9.285871] calling xhci_plat_init+0x0/0x44 @ 1
[ 9.290697] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.296220] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 9.304091] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 9.313556] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0x03100000
[ 9.319917] hub 1-0:1.0: USB hub found
[ 9.323701] hub 1-0:1.0: 1 port detected
[ 9.327802] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.333321] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 9.341022] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 9.347623] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.356004] hub 2-0:1.0: USB hub found
[ 9.359785] hub 2-0:1.0: 1 port detected
[ 9.363943] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.369466] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 9.377335] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 9.386800] xhci-hcd xhci-hcd.1.auto: irq 30, io mem 0x03110000
[ 9.393117] hub 3-0:1.0: USB hub found
[ 9.396900] hub 3-0:1.0: 1 port detected
[ 9.400990] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.406509] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 9.414206] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 9.420799] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.429174] hub 4-0:1.0: USB hub found
[ 9.432965] hub 4-0:1.0: 1 port detected
[ 9.437083] initcall xhci_plat_init+0x0/0x44 returned 0 after 143138 usecs
[ 9.444001] calling usb_storage_driver_init+0x0/0x54 @ 1
[ 9.449487] usbcore: registered new interface driver usb-storage
[ 9.455522] initcall usb_storage_driver_init+0x0/0x54 returned 0 after 5953 usecs
[ 9.463044] calling usb3503_init+0x0/0x74 @ 1
[ 9.467662] initcall usb3503_init+0x0/0x74 returned 0 after 143 usecs
[ 9.474137] calling musb_driver_init+0x0/0x34 @ 1
[ 9.478982] initcall musb_driver_init+0x0/0x34 returned 0 after 31 usecs
[ 9.485716] calling ci_hdrc_platform_register+0x0/0x38 @ 1
[ 9.491345] initcall ci_hdrc_platform_register+0x0/0x38 returned 0 after 30 usecs
[ 9.498864] calling ci_hdrc_usb2_driver_init+0x0/0x30 @ 1
[ 9.504444] initcall ci_hdrc_usb2_driver_init+0x0/0x30 returned 0 after 60 usecs
[ 9.511878] calling ci_hdrc_msm_driver_init+0x0/0x30 @ 1
[ 9.517349] initcall ci_hdrc_msm_driver_init+0x0/0x30 returned 0 after 45 usecs
[ 9.524696] calling ci_hdrc_pci_driver_init+0x0/0x38 @ 1
[ 9.530148] initcall ci_hdrc_pci_driver_init+0x0/0x38 returned 0 after 27 usecs
[ 9.537494] calling ci_hdrc_imx_driver_init+0x0/0x30 @ 1
[ 9.543026] initcall ci_hdrc_imx_driver_init+0x0/0x30 returned 0 after 101 usecs
[ 9.550458] calling usbmisc_imx_driver_init+0x0/0x30 @ 1
[ 9.555996] initcall usbmisc_imx_driver_init+0x0/0x30 returned 0 after 111 usecs
[ 9.563428] calling tegra_usb_driver_init+0x0/0x30 @ 1
[ 9.568756] initcall tegra_usb_driver_init+0x0/0x30 returned 0 after 77 usecs
[ 9.575925] calling gadget_cfs_init+0x0/0x40 @ 1
[ 9.580698] initcall gadget_cfs_init+0x0/0x40 returned 0 after 43 usecs
[ 9.587350] calling udc_plat_driver_init+0x0/0x30 @ 1
[ 9.592577] initcall udc_plat_driver_init+0x0/0x30 returned 0 after 62 usecs
[ 9.599660] calling bdc_driver_init+0x0/0x30 @ 1
[ 9.604439] initcall bdc_driver_init+0x0/0x30 returned 0 after 52 usecs
[ 9.611097] calling bdc_pci_driver_init+0x0/0x38 @ 1
[ 9.616197] initcall bdc_pci_driver_init+0x0/0x38 returned 0 after 23 usecs
[ 9.623192] calling acmmod_init+0x0/0x2c @ 1
[ 9.627570] initcall acmmod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.633777] calling userial_init+0x0/0x170 @ 1
[ 9.638338] initcall userial_init+0x0/0x170 returned 0 after 3 usecs
[ 9.644722] calling gsermod_init+0x0/0x2c @ 1
[ 9.649189] initcall gsermod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.655485] calling obexmod_init+0x0/0x2c @ 1
[ 9.659949] initcall obexmod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.666253] calling ecmmod_init+0x0/0x2c @ 1
[ 9.670631] initcall ecmmod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.676839] calling gethmod_init+0x0/0x2c @ 1
[ 9.681302] initcall gethmod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.687597] calling rndismod_init+0x0/0x2c @ 1
[ 9.692149] initcall rndismod_init+0x0/0x2c returned 0 after 0 usecs
[ 9.698531] calling mass_storagemod_init+0x0/0x30 @ 1
[ 9.703694] initcall mass_storagemod_init+0x0/0x30 returned 0 after 0 usecs
[ 9.710691] calling eth_driver_init+0x0/0x2c @ 1
[ 9.715418] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 9.724331] initcall eth_driver_init+0x0/0x2c returned 0 after 8705 usecs
[ 9.731150] calling msg_driver_init+0x0/0x2c @ 1
[ 9.735875] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
[ 9.737943] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 9.745398] initcall msg_driver_init+0x0/0x2c returned 0 after 9299 usecs
[ 9.758774] calling init+0x0/0xd4 @ 1
[ 9.762566] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers
[ 9.771575] initcall init+0x0/0xd4 returned 0 after 8798 usecs
[ 9.777439] calling ambakmi_driver_init+0x0/0x2c @ 1
[ 9.782531] initcall ambakmi_driver_init+0x0/0x2c returned 0 after 16 usecs
[ 9.789525] calling input_leds_init+0x0/0x2c @ 1
[ 9.794252] initcall input_leds_init+0x0/0x2c returned 0 after 0 usecs
[ 9.800810] calling evdev_init+0x0/0x2c @ 1
[ 9.805098] initcall evdev_init+0x0/0x2c returned 0 after 0 usecs
[ 9.811219] calling atkbd_init+0x0/0x48 @ 1
[ 9.815547] initcall atkbd_init+0x0/0x48 returned 0 after 32 usecs
[ 9.821762] calling cros_ec_keyb_driver_init+0x0/0x30 @ 1
[ 9.827366] initcall cros_ec_keyb_driver_init+0x0/0x30 returned 0 after 79 usecs
[ 9.834803] calling gpio_keys_polled_driver_init+0x0/0x30 @ 1
[ 9.840824] input: buttons1 as /devices/platform/buttons1/input/input0
[ 9.848159] initcall gpio_keys_polled_driver_init+0x0/0x30 returned 0 after 7319 usecs
[ 9.856136] calling psmouse_init+0x0/0xa4 @ 1
[ 9.860659] initcall psmouse_init+0x0/0xa4 returned 0 after 49 usecs
[ 9.867057] calling xenkbd_init+0x0/0x58 @ 1
[ 9.871436] initcall xenkbd_init+0x0/0x58 returned -19 after 0 usecs
[ 9.877819] calling cros_ec_rtc_driver_init+0x0/0x30 @ 1
[ 9.883287] initcall cros_ec_rtc_driver_init+0x0/0x30 returned 0 after 43 usecs
[ 9.890641] calling ds323x_init+0x0/0x88 @ 1
[ 9.895070] initcall ds323x_init+0x0/0x88 returned 0 after 41 usecs
[ 9.901371] calling efi_rtc_driver_init+0x0/0x38 @ 1
[ 9.906483] initcall efi_rtc_driver_init+0x0/0x38 returned -19 after 36 usecs
[ 9.913654] calling ftm_alarm_init+0x0/0x30 @ 1
[ 9.918744] ftm-alarm 2800000.timer: registered as rtc1
[ 9.924062] initcall ftm_alarm_init+0x0/0x30 returned 0 after 5612 usecs
[ 9.930801] calling max77686_rtc_driver_init+0x0/0x30 @ 1
[ 9.936372] initcall max77686_rtc_driver_init+0x0/0x30 returned 0 after 50 usecs
[ 9.943815] calling pl031_driver_init+0x0/0x2c @ 1
[ 9.948732] initcall pl031_driver_init+0x0/0x2c returned 0 after 14 usecs
[ 9.955557] calling rv8803_driver_init+0x0/0x30 @ 1
[ 9.961178] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped.
[ 9.968359] rtc-rv8803 0-0032: Voltage low, data loss detected.
[ 9.974389] hub 3-1:1.0: USB hub found
[ 9.975394] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 9.983867] hub 3-1:1.0: 7 ports detected
[ 9.985983] rtc-rv8803 0-0032: registered as rtc0
[ 9.993207] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 9.998906] rtc-rv8803 0-0032: hctosys: unable to read the hardware clock
[ 10.005869] initcall rv8803_driver_init+0x0/0x30 returned 0 after 44261 usecs
[ 10.013049] calling s5m_rtc_driver_init+0x0/0x30 @ 1
[ 10.018186] initcall s5m_rtc_driver_init+0x0/0x30 returned 0 after 54 usecs
[ 10.025183] calling i2c_dev_init+0x0/0xf0 @ 1
[ 10.029655] i2c /dev entries driver
[ 10.033371] initcall i2c_dev_init+0x0/0xf0 returned 0 after 3629 usecs
[ 10.039947] calling rk3x_i2c_driver_init+0x0/0x30 @ 1
[ 10.045261] initcall rk3x_i2c_driver_init+0x0/0x30 returned 0 after 133 usecs
[ 10.052453] calling ec_i2c_tunnel_driver_init+0x0/0x30 @ 1
[ 10.058134] initcall ec_i2c_tunnel_driver_init+0x0/0x30 returned 0 after 69 usecs
[ 10.065656] calling pca954x_driver_init+0x0/0x30 @ 1
[ 10.070764] initcall pca954x_driver_init+0x0/0x30 returned 0 after 31 usecs
[ 10.077764] calling vexpress_reset_driver_init+0x0/0x30 @ 1
[ 10.083519] initcall vexpress_reset_driver_init+0x0/0x30 returned 0 after 63 usecs
[ 10.091128] calling xgene_reboot_init+0x0/0x30 @ 1
[ 10.096079] initcall xgene_reboot_init+0x0/0x30 returned 0 after 46 usecs
[ 10.102900] calling syscon_reboot_driver_init+0x0/0x30 @ 1
[ 10.108656] initcall syscon_reboot_driver_init+0x0/0x30 returned 0 after 153 usecs
[ 10.116267] calling syscon_reboot_mode_driver_init+0x0/0x30 @ 1
[ 10.122351] initcall syscon_reboot_mode_driver_init+0x0/0x30 returned 0 after 48 usecs
[ 10.130308] calling bq27xxx_battery_i2c_driver_init+0x0/0x30 @ 1
[ 10.136473] initcall bq27xxx_battery_i2c_driver_init+0x0/0x30 returned 0 after 40 usecs
[ 10.144520] calling scpi_hwmon_platdrv_init+0x0/0x30 @ 1
[ 10.150002] initcall scpi_hwmon_platdrv_init+0x0/0x30 returned 0 after 54 usecs
[ 10.157348] calling sl28cpld_hwmon_driver_init+0x0/0x30 @ 1
[ 10.163264] initcall sl28cpld_hwmon_driver_init+0x0/0x30 returned 0 after 202 usecs
[ 10.170990] calling qoriq_tmu_init+0x0/0x30 @ 1
[ 10.189106] initcall qoriq_tmu_init+0x0/0x30 returned 0 after 13131 usecs
[ 10.195939] calling sp805_wdt_driver_init+0x0/0x2c @ 1
[ 10.201364] sp805-wdt c000000.watchdog: registration successful
[ 10.207415] sp805-wdt c010000.watchdog: registration successful
[ 10.213393] initcall sp805_wdt_driver_init+0x0/0x2c returned 0 after 11916 usecs
[ 10.220828] calling dw_wdt_driver_init+0x0/0x30 @ 1
[ 10.225880] initcall dw_wdt_driver_init+0x0/0x30 returned 0 after 61 usecs
[ 10.232790] calling imx2_wdt_driver_init+0x0/0x38 @ 1
[ 10.238009] initcall imx2_wdt_driver_init+0x0/0x38 returned -19 after 55 usecs
[ 10.245270] calling sl28cpld_wdt_driver_init+0x0/0x30 @ 1
[ 10.252587] sl28cpld-wdt 2000000.i2c:sl28cpld@4a:watchdog@4: initial timeout 6 sec
[ 10.260234] initcall sl28cpld_wdt_driver_init+0x0/0x30 returned 0 after 9227 usecs
[ 10.267858] calling dt_cpufreq_platdrv_init+0x0/0x30 @ 1
[ 10.273319] initcall dt_cpufreq_platdrv_init+0x0/0x30 returned 0 after 33 usecs
[ 10.280689] calling scpi_cpufreq_platdrv_init+0x0/0x30 @ 1
[ 10.286334] initcall scpi_cpufreq_platdrv_init+0x0/0x30 returned 0 after 36 usecs
[ 10.293865] calling qoriq_cpufreq_platform_driver_init+0x0/0x30 @ 1
[ 10.300644] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver
[ 10.308555] initcall qoriq_cpufreq_platform_driver_init+0x0/0x30 returned 0 after 8110 usecs
[ 10.317066] calling arm_idle_init+0x0/0x190 @ 1
[ 10.321730] initcall arm_idle_init+0x0/0x190 returned -95 after 12 usecs
[ 10.328466] calling psci_idle_init+0x0/0xc0 @ 1
[ 10.333282] initcall psci_idle_init+0x0/0xc0 returned 0 after 173 usecs
[ 10.339934] calling mmc_pwrseq_simple_driver_init+0x0/0x30 @ 1
[ 10.345948] initcall mmc_pwrseq_simple_driver_init+0x0/0x30 returned 0 after 62 usecs
[ 10.353818] calling mmc_pwrseq_emmc_driver_init+0x0/0x30 @ 1
[ 10.359644] initcall mmc_pwrseq_emmc_driver_init+0x0/0x30 returned 0 after 50 usecs
[ 10.367339] calling mmc_blk_init+0x0/0x124 @ 1
[ 10.371917] initcall mmc_blk_init+0x0/0x124 returned 0 after 24 usecs
[ 10.377945] usb 3-1.6: new full-speed USB device number 3 using xhci-hcd
[ 10.378391] calling mmci_driver_init+0x0/0x30 @ 1
[ 10.389946] initcall mmci_driver_init+0x0/0x30 returned 0 after 18 usecs
[ 10.396703] calling sdhci_drv_init+0x0/0x3c @ 1
[ 10.401369] sdhci: Secure Digital Host Controller Interface driver
[ 10.407577] sdhci: Copyright(c) Pierre Ossman
[ 10.411951] initcall sdhci_drv_init+0x0/0x3c returned 0 after 10346 usecs
[ 10.418773] calling sdhci_acpi_driver_init+0x0/0x30 @ 1
[ 10.424174] initcall sdhci_acpi_driver_init+0x0/0x30 returned 0 after 46 usecs
[ 10.431432] calling sdhci_f_sdh30_driver_init+0x0/0x30 @ 1
[ 10.437084] initcall sdhci_f_sdh30_driver_init+0x0/0x30 returned 0 after 50 usecs
[ 10.444607] calling mmc_spi_driver_init+0x0/0x30 @ 1
[ 10.449728] initcall mmc_spi_driver_init+0x0/0x30 returned 0 after 15 usecs
[ 10.456725] calling dw_mci_init+0x0/0x30 @ 1
[ 10.461103] Synopsys Designware Multimedia Card Interface Driver
[ 10.467134] initcall dw_mci_init+0x0/0x30 returned 0 after 5890 usecs
[ 10.473605] calling dw_mci_pltfm_driver_init+0x0/0x30 @ 1
[ 10.479182] initcall dw_mci_pltfm_driver_init+0x0/0x30 returned 0 after 65 usecs
[ 10.486616] calling dw_mci_exynos_pltfm_driver_init+0x0/0x30 @ 1
[ 10.492825] initcall dw_mci_exynos_pltfm_driver_init+0x0/0x30 returned 0 after 76 usecs
[ 10.500877] calling dw_mci_hi3798cv200_driver_init+0x0/0x30 @ 1
[ 10.506967] initcall dw_mci_hi3798cv200_driver_init+0x0/0x30 returned 0 after 49 usecs
[ 10.514929] calling dw_mci_k3_pltfm_driver_init+0x0/0x30 @ 1
[ 10.520769] initcall dw_mci_k3_pltfm_driver_init+0x0/0x30 returned 0 after 61 usecs
[ 10.528483] calling sdhci_pltfm_drv_init+0x0/0x30 @ 1
[ 10.533663] sdhci-pltfm: SDHCI platform and OF driver helper
[ 10.539362] initcall sdhci_pltfm_drv_init+0x0/0x30 returned 0 after 5565 usecs
[ 10.546636] calling sdhci_cdns_driver_init+0x0/0x30 @ 1
[ 10.552050] initcall sdhci_cdns_driver_init+0x0/0x30 returned 0 after 57 usecs
[ 10.559327] calling sdhci_arasan_driver_init+0x0/0x30 @ 1
[ 10.564965] initcall sdhci_arasan_driver_init+0x0/0x30 returned 0 after 107 usecs
[ 10.572491] calling sdhci_esdhc_driver_init+0x0/0x30 @ 1
[ 10.578046] initcall sdhci_esdhc_driver_init+0x0/0x30 returned 0 after 120 usecs
[ 10.578050] sdhci-esdhc 2140000.mmc: Adding to iommu group 3
[ 10.578284] sdhci-esdhc 2150000.mmc: Adding to iommu group 4
[ 10.585484] calling sdhci_xenon_driver_init+0x0/0x30 @ 1
[ 10.602413] initcall sdhci_xenon_driver_init+0x0/0x30 returned 0 after 124 usecs
[ 10.609876] calling gpio_led_driver_init+0x0/0x30 @ 1
[ 10.614484] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA
[ 10.619830] initcall gpio_led_driver_init+0x0/0x30 returned 0 after 4661 usecs
[ 10.621951] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA
[ 10.629222] calling led_pwm_driver_init+0x0/0x30 @ 1
[ 10.641399] initcall led_pwm_driver_init+0x0/0x30 returned 0 after 171 usecs
[ 10.648543] calling syscon_led_driver_init+0x0/0x30 @ 1
[ 10.653978] initcall syscon_led_driver_init+0x0/0x30 returned 0 after 82 usecs
[ 10.661258] calling ledtrig_disk_init+0x0/0x74 @ 1
[ 10.666179] initcall ledtrig_disk_init+0x0/0x74 returned 0 after 14 usecs
[ 10.673044] calling heartbeat_trig_init+0x0/0x5c @ 1
[ 10.678189] initcall heartbeat_trig_init+0x0/0x5c returned 0 after 57 usecs
[ 10.685267] calling ledtrig_cpu_init+0x0/0x130 @ 1
[ 10.690264] ledtrig-cpu: registered to indicate activity on CPUs
[ 10.696366] initcall ledtrig_cpu_init+0x0/0x130 returned 0 after 6042 usecs
[ 10.703402] calling defon_led_trigger_init+0x0/0x2c @ 1
[ 10.708811] initcall defon_led_trigger_init+0x0/0x2c returned 0 after 60 usecs
[ 10.716123] calling ledtrig_panic_init+0x0/0x5c @ 1
[ 10.721164] initcall ledtrig_panic_init+0x0/0x5c returned 0 after 34 usecs
[ 10.728110] calling scpi_driver_init+0x0/0x30 @ 1
[ 10.733010] initcall scpi_driver_init+0x0/0x30 returned 0 after 74 usecs
[ 10.739772] calling scpi_power_domain_driver_init+0x0/0x30 @ 1
[ 10.745796] initcall scpi_power_domain_driver_init+0x0/0x30 returned 0 after 60 usecs
[ 10.753665] random: fast init done
[ 10.757105] calling esrt_sysfs_init+0x0/0x2b0 @ 1
[ 10.761941] initcall esrt_sysfs_init+0x0/0x2b0 returned -38 after 4 usecs
[ 10.768812] calling efivars_pstore_init+0x0/0xd8 @ 1
[ 10.773901] initcall efivars_pstore_init+0x0/0xd8 returned 0 after 0 usecs
[ 10.780820] calling efi_capsule_loader_init+0x0/0x68 @ 1
[ 10.786247] initcall efi_capsule_loader_init+0x0/0x68 returned -19 after 0 usecs
[ 10.793690] calling smccc_soc_init+0x0/0x27c @ 1
[ 10.798424] initcall smccc_soc_init+0x0/0x27c returned 0 after 0 usecs
[ 10.804985] calling meson_crypto_driver_init+0x0/0x30 @ 1
[ 10.810589] initcall meson_crypto_driver_init+0x0/0x30 returned 0 after 68 usecs
[ 10.818057] calling hid_init+0x0/0x6c @ 1
[ 10.822209] initcall hid_init+0x0/0x6c returned 0 after 22 usecs
[ 10.828255] calling hid_generic_init+0x0/0x38 @ 1
[ 10.833114] initcall hid_generic_init+0x0/0x38 returned 0 after 37 usecs
[ 10.839860] calling a4_driver_init+0x0/0x38 @ 1
[ 10.844579] initcall a4_driver_init+0x0/0x38 returned 0 after 46 usecs
[ 10.851176] calling apple_driver_init+0x0/0x38 @ 1
[ 10.856113] initcall apple_driver_init+0x0/0x38 returned 0 after 24 usecs
[ 10.862943] calling belkin_driver_init+0x0/0x38 @ 1
[ 10.867960] initcall belkin_driver_init+0x0/0x38 returned 0 after 16 usecs
[ 10.874882] calling ch_driver_init+0x0/0x38 @ 1
[ 10.879555] initcall ch_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 10.886145] calling ch_driver_init+0x0/0x38 @ 1
[ 10.890821] initcall ch_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 10.897412] calling cp_driver_init+0x0/0x38 @ 1
[ 10.902091] initcall cp_driver_init+0x0/0x38 returned 0 after 23 usecs
[ 10.905944] usb 3-1.3: new high-speed USB device number 4 using xhci-hcd
[ 10.908678] calling ez_driver_init+0x0/0x38 @ 1
[ 10.920062] initcall ez_driver_init+0x0/0x38 returned 0 after 30 usecs
[ 10.926664] calling ite_driver_init+0x0/0x38 @ 1
[ 10.931432] initcall ite_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 10.938108] calling ks_driver_init+0x0/0x38 @ 1
[ 10.942781] initcall ks_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 10.949352] calling lg_driver_init+0x0/0x38 @ 1
[ 10.954022] initcall lg_driver_init+0x0/0x38 returned 0 after 17 usecs
[ 10.960625] calling lg_g15_driver_init+0x0/0x38 @ 1
[ 10.965653] initcall lg_g15_driver_init+0x0/0x38 returned 0 after 19 usecs
[ 10.972573] calling ms_driver_init+0x0/0x38 @ 1
[ 10.977243] initcall ms_driver_init+0x0/0x38 returned 0 after 20 usecs
[ 10.983816] calling mr_driver_init+0x0/0x38 @ 1
[ 10.988489] initcall mr_driver_init+0x0/0x38 returned 0 after 18 usecs
[ 10.989473] mmc1: new ultra high speed SDR104 SDHC card at address 5048
[ 10.995050] calling redragon_driver_init+0x0/0x38 @ 1
[ 11.002122] mmcblk1: mmc1:5048 SD16G 14.4 GiB
[ 11.006899] initcall redragon_driver_init+0x0/0x38 returned 0 after 32 usecs
[ 11.018481] calling hid_init+0x0/0x84 @ 1
[ 11.022618] mmc0: new HS400 MMC card at address 0001
[ 11.023022] mmcblk0: mmc0:0001 S0J58X 29.6 GiB
[ 11.028965] hid-generic 0003:064F:2AF9.0001: device has no listeners, quitting
[ 11.032658] mmcblk0boot0: mmc0:0001 S0J58X partition 1 31.5 MiB
[ 11.039661] usbcore: registered new interface driver usbhid
[ 11.045740] mmcblk0boot1: mmc0:0001 S0J58X partition 2 31.5 MiB
[ 11.051044] usbhid: USB HID core driver
[ 11.057120] mmcblk0rpmb: mmc0:0001 S0J58X partition 3 4.00 MiB, chardev (241:0)
[ 11.060873] initcall hid_init+0x0/0x84 returned 0 after 32476 usecs
[ 11.074530] calling cros_ec_driver_init+0x0/0x30 @ 1
[ 11.079688] initcall cros_ec_driver_init+0x0/0x30 returned 0 after 44 usecs
[ 11.086761] calling cros_ec_driver_spi_init+0x0/0x30 @ 1
[ 11.086859] mmcblk0: p1 p2
[ 11.092253] initcall cros_ec_driver_spi_init+0x0/0x30 returned 0 after 36 usecs
[ 11.102435] calling cros_ec_chardev_driver_init+0x0/0x30 @ 1
[ 11.108415] initcall cros_ec_chardev_driver_init+0x0/0x30 returned 0 after 164 usecs
[ 11.116249] calling cros_ec_lightbar_driver_init+0x0/0x30 @ 1
[ 11.122200] initcall cros_ec_lightbar_driver_init+0x0/0x30 returned 0 after 59 usecs
[ 11.130040] calling cros_ec_vbc_driver_init+0x0/0x30 @ 1
[ 11.135586] initcall cros_ec_vbc_driver_init+0x0/0x30 returned 0 after 79 usecs
[ 11.142961] calling cros_ec_debugfs_driver_init+0x0/0x30 @ 1
[ 11.148832] initcall cros_ec_debugfs_driver_init+0x0/0x30 returned 0 after 80 usecs
[ 11.156560] calling cros_ec_sensorhub_driver_init+0x0/0x30 @ 1
[ 11.156635] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[ 11.162574] initcall cros_ec_sensorhub_driver_init+0x0/0x30 returned 0 after 47 usecs
[ 11.169076] scsi host1: usb-storage 3-1.3:1.0
[ 11.176720] calling cros_ec_sysfs_driver_init+0x0/0x34 @ 1
[ 11.186772] initcall cros_ec_sysfs_driver_init+0x0/0x34 returned 0 after 76 usecs
[ 11.194316] calling cros_usbpd_notify_init+0x0/0x50 @ 1
[ 11.199768] initcall cros_usbpd_notify_init+0x0/0x50 returned 0 after 98 usecs
[ 11.207047] calling arm_mhu_driver_init+0x0/0x2c @ 1
[ 11.212148] initcall arm_mhu_driver_init+0x0/0x2c returned 0 after 17 usecs
[ 11.219181] calling arm_mhu_db_driver_init+0x0/0x2c @ 1
[ 11.219193] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 11.224534] initcall arm_mhu_db_driver_init+0x0/0x2c returned 0 after 12 usecs
[ 11.231950] GPT:266272 != 30253055
[ 11.239203] calling platform_mhu_driver_init+0x0/0x30 @ 1
[ 11.242623] GPT:Alternate GPT header not at the end of the disk.
[ 11.248207] initcall platform_mhu_driver_init+0x0/0x30 returned 0 after 74 usecs
[ 11.254156] GPT:266272 != 30253055
[ 11.254159] GPT: Use GNU Parted to correct GPT errors.
[ 11.254175] mmcblk1: p1
[ 11.261593] calling qcom_glink_ssr_driver_init+0x0/0x34 @ 1
[ 11.278385] initcall qcom_glink_ssr_driver_init+0x0/0x34 returned 0 after 12 usecs
[ 11.285996] calling extcon_class_init+0x0/0x38 @ 1
[ 11.290909] initcall extcon_class_init+0x0/0x38 returned 0 after 10 usecs
[ 11.297729] calling usb_extcon_driver_init+0x0/0x30 @ 1
[ 11.303141] initcall usb_extcon_driver_init+0x0/0x30 returned 0 after 74 usecs
[ 11.310400] calling extcon_cros_ec_driver_init+0x0/0x30 @ 1
[ 11.316139] initcall extcon_cros_ec_driver_init+0x0/0x30 returned 0 after 51 usecs
[ 11.323747] calling hisi_l3c_pmu_module_init+0x0/0x98 @ 1
[ 11.329291] initcall hisi_l3c_pmu_module_init+0x0/0x98 returned 0 after 31 usecs
[ 11.336725] calling hisi_hha_pmu_module_init+0x0/0x98 @ 1
[ 11.342268] initcall hisi_hha_pmu_module_init+0x0/0x98 returned 0 after 31 usecs
[ 11.349701] calling hisi_ddrc_pmu_module_init+0x0/0x98 @ 1
[ 11.355331] initcall hisi_ddrc_pmu_module_init+0x0/0x98 returned 0 after 30 usecs
[ 11.362850] calling optee_driver_init+0x0/0x30 @ 1
[ 11.367800] initcall optee_driver_init+0x0/0x30 returned 0 after 48 usecs
[ 11.374622] calling alsa_timer_init+0x0/0x23c @ 1
[ 11.379532] initcall alsa_timer_init+0x0/0x23c returned 0 after 94 usecs
[ 11.386273] calling alsa_pcm_init+0x0/0x8c @ 1
[ 11.390828] initcall alsa_pcm_init+0x0/0x8c returned 0 after 3 usecs
[ 11.397211] calling snd_soc_init+0x0/0x98 @ 1
[ 11.401917] initcall snd_soc_init+0x0/0x98 returned 0 after 236 usecs
[ 11.408393] calling wm8904_i2c_driver_init+0x0/0x30 @ 1
[ 11.413759] initcall wm8904_i2c_driver_init+0x0/0x30 returned 0 after 28 usecs
[ 11.421017] calling asoc_simple_card_init+0x0/0x30 @ 1
[ 11.426330] initcall asoc_simple_card_init+0x0/0x30 returned 0 after 62 usecs
[ 11.433500] calling fsl_sai_driver_init+0x0/0x30 @ 1
[ 11.438658] initcall fsl_sai_driver_init+0x0/0x30 returned 0 after 82 usecs
[ 11.445653] calling sock_diag_init+0x0/0x54 @ 1
[ 11.450313] initcall sock_diag_init+0x0/0x54 returned 0 after 21 usecs
[ 11.456873] calling init_net_drop_monitor+0x0/0x13c @ 1
[ 11.462210] drop_monitor: Initializing network drop monitor service
[ 11.468526] initcall init_net_drop_monitor+0x0/0x13c returned 0 after 6168 usecs
[ 11.475959] calling failover_init+0x0/0x34 @ 1
[ 11.480511] initcall failover_init+0x0/0x34 returned 0 after 1 usecs
[ 11.486899] calling llc_init+0x0/0x44 @ 1
[ 11.491021] initcall llc_init+0x0/0x44 returned 0 after 0 usecs
[ 11.496972] calling snap_init+0x0/0x54 @ 1
[ 11.501178] initcall snap_init+0x0/0x54 returned 0 after 2 usecs
[ 11.507213] calling gre_offload_init+0x0/0x68 @ 1
[ 11.512029] initcall gre_offload_init+0x0/0x68 returned 0 after 1 usecs
[ 11.518676] calling sysctl_ipv4_init+0x0/0x70 @ 1
[ 11.523561] initcall sysctl_ipv4_init+0x0/0x70 returned 0 after 69 usecs
[ 11.530297] calling inet_diag_init+0x0/0xb0 @ 1
[ 11.534940] initcall inet_diag_init+0x0/0xb0 returned 0 after 3 usecs
[ 11.541412] calling tcp_diag_init+0x0/0x2c @ 1
[ 11.545966] initcall tcp_diag_init+0x0/0x2c returned 0 after 0 usecs
[ 11.552350] calling cubictcp_register+0x0/0x70 @ 1
[ 11.557252] initcall cubictcp_register+0x0/0x70 returned 0 after 1 usecs
[ 11.563986] calling inet6_init+0x0/0x350 @ 1
[ 11.568584] NET: Registered protocol family 10
[ 11.573479] Segment Routing with IPv6
[ 11.577204] initcall inet6_init+0x0/0x350 returned 0 after 8631 usecs
[ 11.583694] calling packet_init+0x0/0xa4 @ 1
[ 11.588076] NET: Registered protocol family 17
[ 11.592544] initcall packet_init+0x0/0xa4 returned 0 after 4364 usecs
[ 11.599021] calling br_init+0x0/0xe4 @ 1
[ 11.603067] initcall br_init+0x0/0xe4 returned 0 after 14 usecs
[ 11.609018] calling dsa_init_module+0x0/0xbc @ 1
[ 11.613819] initcall dsa_init_module+0x0/0xbc returned 0 after 71 usecs
[ 11.620479] calling dsa_tag_driver_module_init+0x0/0x38 @ 1
[ 11.626181] initcall dsa_tag_driver_module_init+0x0/0x38 returned 0 after 6 usecs
[ 11.633703] calling can_init+0x0/0xdc @ 1
[ 11.637820] can: controller area network core
[ 11.642227] NET: Registered protocol family 29
[ 11.646693] initcall can_init+0x0/0xdc returned 0 after 8664 usecs
[ 11.652905] calling raw_module_init+0x0/0x58 @ 1
[ 11.657633] can: raw protocol
[ 11.660612] initcall raw_module_init+0x0/0x58 returned 0 after 2908 usecs
[ 11.667436] calling bcm_module_init+0x0/0x6c @ 1
[ 11.672164] can: broadcast manager protocol
[ 11.676368] initcall bcm_module_init+0x0/0x6c returned 0 after 4105 usecs
[ 11.683190] calling cgw_module_init+0x0/0x174 @ 1
[ 11.688005] can: netlink gateway - max_hops=1
[ 11.692430] initcall cgw_module_init+0x0/0x174 returned 0 after 4321 usecs
[ 11.699342] calling init_rpcsec_gss+0x0/0x90 @ 1
[ 11.704087] initcall init_rpcsec_gss+0x0/0x90 returned 0 after 17 usecs
[ 11.710736] calling init_p9+0x0/0x4c @ 1
[ 11.714814] 9pnet: Installing 9P2000 support
[ 11.719104] initcall init_p9+0x0/0x4c returned 0 after 4237 usecs
[ 11.725228] calling p9_virtio_init+0x0/0x68 @ 1
[ 11.729891] initcall p9_virtio_init+0x0/0x68 returned 0 after 18 usecs
[ 11.736453] calling init_dns_resolver+0x0/0x7fac @ 1
[ 11.741540] Key type dns_resolver registered
[ 11.745827] initcall init_dns_resolver+0x0/0x7fac returned 0 after 4197 usecs
[ 11.753057] calling xen_pm_init+0x0/0x100 @ 1
[ 11.757527] initcall xen_pm_init+0x0/0x100 returned -19 after 0 usecs
[ 11.764001] calling init_oops_id+0x0/0x68 @ 1
[ 11.768471] initcall init_oops_id+0x0/0x68 returned 0 after 1 usecs
[ 11.774770] calling reboot_ksysfs_init+0x0/0x6c @ 1
[ 11.779764] initcall reboot_ksysfs_init+0x0/0x6c returned 0 after 6 usecs
[ 11.786587] calling cpu_latency_qos_init+0x0/0x60 @ 1
[ 11.791834] initcall cpu_latency_qos_init+0x0/0x60 returned 0 after 81 usecs
[ 11.798923] calling pm_debugfs_init+0x0/0x44 @ 1
[ 11.803659] initcall pm_debugfs_init+0x0/0x44 returned 0 after 8 usecs
[ 11.810219] calling printk_late_init+0x0/0x154 @ 1
[ 11.815122] initcall printk_late_init+0x0/0x154 returned 0 after 1 usecs
[ 11.821856] calling init_srcu_module_notifier+0x0/0x50 @ 1
[ 11.827457] initcall init_srcu_module_notifier+0x0/0x50 returned 0 after 1 usecs
[ 11.834888] calling swiotlb_create_debugfs+0x0/0x78 @ 1
[ 11.840259] initcall swiotlb_create_debugfs+0x0/0x78 returned 0 after 28 usecs
[ 11.847523] calling tk_debug_sleep_time_init+0x0/0x44 @ 1
[ 11.853042] initcall tk_debug_sleep_time_init+0x0/0x44 returned 0 after 4 usecs
[ 11.860388] calling taskstats_init+0x0/0x5c @ 1
[ 11.865041] registered taskstats version 1
[ 11.869154] initcall taskstats_init+0x0/0x5c returned 0 after 4029 usecs
[ 11.875888] calling init_trampolines+0x0/0x34 @ 1
[ 11.880706] initcall init_trampolines+0x0/0x34 returned 0 after 1 usecs
[ 11.887354] calling load_system_certificate_list+0x0/0x12c @ 1
[ 11.893302] Loading compiled-in X.509 certificates
[ 11.898111] initcall load_system_certificate_list+0x0/0x12c returned 0 after 4696 usecs
[ 11.906154] calling fault_around_debugfs+0x0/0x44 @ 1
[ 11.911325] initcall fault_around_debugfs+0x0/0x44 returned 0 after 7 usecs
[ 11.918321] calling max_swapfiles_check+0x0/0x18 @ 1
[ 11.923398] initcall max_swapfiles_check+0x0/0x18 returned 0 after 0 usecs
[ 11.930305] calling split_huge_pages_debugfs+0x0/0xc0 @ 1
[ 11.935821] initcall split_huge_pages_debugfs+0x0/0xc0 returned 0 after 4 usecs
[ 11.943167] calling check_early_ioremap_leak+0x0/0x6c @ 1
[ 11.948680] initcall check_early_ioremap_leak+0x0/0x6c returned 0 after 0 usecs
[ 11.956024] calling pstore_init+0x0/0x80 @ 1
[ 11.960415] initcall pstore_init+0x0/0x80 returned 0 after 10 usecs
[ 11.966716] calling init_root_keyring+0x0/0x2c @ 1
[ 11.971639] initcall init_root_keyring+0x0/0x2c returned 0 after 21 usecs
[ 11.978466] calling integrity_fs_init+0x0/0x78 @ 1
[ 11.983376] initcall integrity_fs_init+0x0/0x78 returned 0 after 6 usecs
[ 11.990111] calling blk_timeout_init+0x0/0x24 @ 1
[ 11.994924] initcall blk_timeout_init+0x0/0x24 returned 0 after 0 usecs
[ 12.001570] calling prandom_init_late+0x0/0x4c @ 1
[ 12.006472] initcall prandom_init_late+0x0/0x4c returned 0 after 0 usecs
[ 12.013205] calling pci_resource_alignment_sysfs_init+0x0/0x38 @ 1
[ 12.019509] initcall pci_resource_alignment_sysfs_init+0x0/0x38 returned 0 after 3 usecs
[ 12.027642] calling pci_sysfs_init+0x0/0x70 @ 1
[ 12.032285] initcall pci_sysfs_init+0x0/0x70 returned 0 after 1 usecs
[ 12.038757] calling bert_init+0x0/0x254 @ 1
[ 12.043048] initcall bert_init+0x0/0x254 returned 0 after 0 usecs
[ 12.049172] calling amba_deferred_retry+0x0/0xb8 @ 1
[ 12.054254] initcall amba_deferred_retry+0x0/0xb8 returned 0 after 0 usecs
[ 12.061162] calling clk_debug_init+0x0/0x134 @ 1
[ 12.067852] initcall clk_debug_init+0x0/0x134 returned 0 after 1914 usecs
[ 12.074689] calling setup_vcpu_hotplug_event+0x0/0x44 @ 1
[ 12.080204] initcall setup_vcpu_hotplug_event+0x0/0x44 returned -19 after 0 usecs
[ 12.087731] calling boot_wait_for_devices+0x0/0x38 @ 1
[ 12.092990] initcall boot_wait_for_devices+0x0/0x38 returned 0 after 1 usecs
[ 12.100080] calling sync_state_resume_initcall+0x0/0x28 @ 1
[ 12.105773] initcall sync_state_resume_initcall+0x0/0x28 returned 0 after 1 usecs
[ 12.113293] calling deferred_probe_initcall+0x0/0xc0 @ 1
[ 12.118853] fsl-edma 22c0000.dma-controller: Adding to iommu group 5
[ 12.126408] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges:
[ 12.134221] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
[ 12.143063] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
[ 12.151907] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x0000000000
[ 12.160748] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x0000000000
[ 12.169586] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x0000000000
[ 12.178424] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x0000000000
[ 12.187257] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x0000000000
[ 12.196168] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00]
[ 12.204987] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00
[ 12.211988] pci_bus 0000:00: root bus resource [bus 00]
[ 12.217240] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff])
[ 12.227637] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff])
[ 12.238473] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff])
[ 12.248870] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff])
[ 12.259703] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff])
[ 12.270103] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff])
[ 12.280938] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff])
[ 12.291351] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001
[ 12.297415] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.307902] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.318825] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff 64bit] (from Enhanced Allocation, properties 0x4)
[ 12.329573] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff 64bit pref] (from Enhanced Allocation, properties 0x3)
[ 12.340775] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 12.346294] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs)
[ 12.356257] pci 0000:00:00.0: VF(n) BAR2 space: [mem 0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 12.366799] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001
[ 12.372858] pci 0000:00:00.1: BAR 0: [mem 0x1f8040000-0x1f807ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.383346] pci 0000:00:00.1: BAR 2: [mem 0x1f8170000-0x1f817ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.394267] pci 0000:00:00.1: VF BAR 0: [mem 0x1f8210000-0x1f821ffff 64bit] (from Enhanced Allocation, properties 0x4)
[ 12.405018] pci 0000:00:00.1: VF BAR 2: [mem 0x1f8230000-0x1f823ffff 64bit pref] (from Enhanced Allocation, properties 0x3)
[ 12.416216] pci 0000:00:00.1: PME# supported from D0 D3hot
[ 12.421733] pci 0000:00:00.1: VF(n) BAR0 space: [mem 0x1f8210000-0x1f822ffff 64bit] (contains BAR0 for 2 VFs)
[ 12.431695] pci 0000:00:00.1: VF(n) BAR2 space: [mem 0x1f8230000-0x1f824ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 12.442227] pci 0000:00:00.1: Linked as a sync state only consumer to 0000:00:00.1
[ 12.449858] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001
[ 12.455914] pci 0000:00:00.2: BAR 0: [mem 0x1f8080000-0x1f80bffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.466404] pci 0000:00:00.2: BAR 2: [mem 0x1f8180000-0x1f818ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.477339] pci 0000:00:00.2: PME# supported from D0 D3hot
[ 12.482959] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001
[ 12.489020] pci 0000:00:00.3: BAR 0: [mem 0x1f8100000-0x1f811ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.499507] pci 0000:00:00.3: BAR 2: [mem 0x1f8190000-0x1f819ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.510440] pci 0000:00:00.3: PME# supported from D0 D3hot
[ 12.516061] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001
[ 12.522119] pci 0000:00:00.4: BAR 0: [mem 0x1f8120000-0x1f813ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.532608] pci 0000:00:00.4: BAR 2: [mem 0x1f81a0000-0x1f81affff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.543542] pci 0000:00:00.4: PME# supported from D0 D3hot
[ 12.549155] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801
[ 12.555212] pci 0000:00:00.5: BAR 0: [mem 0x1f8140000-0x1f815ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.565699] pci 0000:00:00.5: BAR 2: [mem 0x1f81b0000-0x1f81bffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.576644] pci 0000:00:00.5: BAR 4: [mem 0x1fc000000-0x1fc3fffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.587173] pci 0000:00:00.5: PME# supported from D0 D3hot
[ 12.587188] scsi 1:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
[ 12.592817] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001
[ 12.606895] pci 0000:00:00.6: BAR 0: [mem 0x1f80c0000-0x1f80fffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 12.617393] pci 0000:00:00.6: BAR 2: [mem 0x1f81c0000-0x1f81cffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 12.628345] pci 0000:00:00.6: PME# supported from D0 D3hot
[ 12.628382] sd 1:0:0:0: [sda] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
[ 12.634798] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700
[ 12.647590] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null)
[ 12.655149] sd 1:0:0:0: [sda] Write Protect is off
[ 12.655295] pci 0000:00:00.0: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 12.659969] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 12.666433] pci 0000:00:00.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 12.678023] fsl_enetc 0000:00:00.0: Linked as a consumer to 5000000.iommu
[ 12.684875] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.684884] fsl_enetc 0000:00:00.0: Adding to iommu group 6
[ 12.701791] sda: sda1
[ 12.706485] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 12.805947] fsl_enetc 0000:00:00.0: enabling device (0400 -> 0402)
[ 12.812200] fsl_enetc 0000:00:00.0: no MAC address specified for SI1, using 8e:d8:2f:4a:a1:8e
[ 12.820769] fsl_enetc 0000:00:00.0: no MAC address specified for SI2, using c6:34:53:33:70:32
[ 12.829753] libphy: Freescale ENETC MDIO Bus: probed
[ 12.835987] libphy: Freescale ENETC internal MDIO Bus: probed
[ 12.842300] pci 0000:00:00.1: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 12.848791] pci 0000:00:00.1: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 12.855291] fsl_enetc 0000:00:00.1: Linked as a consumer to 5000000.iommu
[ 12.862151] fsl_enetc 0000:00:00.1: Adding to iommu group 7
[ 12.973945] fsl_enetc 0000:00:00.1: enabling device (0400 -> 0402)
[ 12.980198] fsl_enetc 0000:00:00.1: no MAC address specified for SI0, using 12:92:e7:84:ab:1c
[ 12.988766] fsl_enetc 0000:00:00.1: no MAC address specified for SI1, using f2:4c:fa:ab:57:02
[ 12.997332] fsl_enetc 0000:00:00.1: no MAC address specified for SI2, using c6:14:47:66:62:2d
[ 13.006327] mdio_bus 0000:00:00.1: Linked as a sync state only consumer to 0000:00:00.1
[ 13.014402] libphy: Freescale ENETC MDIO Bus: probed
[ 13.019875] mdio_bus 0000:00:00.1:04: Linked as a consumer to 0000:00:00.1
[ 13.026817] mdio_bus 0000:00:00.1:04: probe deferral - supplier 0000:00:00.1 not ready
[ 13.035311] pci 0000:00:00.2: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.041806] pci 0000:00:00.2: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.048295] fsl_enetc 0000:00:00.2: Linked as a consumer to 5000000.iommu
[ 13.055146] fsl_enetc 0000:00:00.2: Adding to iommu group 8
[ 13.165945] fsl_enetc 0000:00:00.2: enabling device (0400 -> 0402)
[ 13.172192] fsl_enetc 0000:00:00.2: no MAC address specified for SI0, using 1e:9a:57:30:a7:52
[ 13.181494] pci 0000:00:00.3: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.188006] pci 0000:00:00.3: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.194500] fsl_enetc_mdio 0000:00:00.3: Linked as a consumer to 5000000.iommu
[ 13.201786] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 9
[ 13.313948] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402)
[ 13.320784] libphy: FSL PCIe IE Central MDIO Bus: probed
[ 13.326323] mdio_bus 0000:00:00.3: MDIO device at address 7 is missing.
[ 13.333163] mdio_bus 0000:00:00.3: MDIO device at address 8 is missing.
[ 13.340003] mdio_bus 0000:00:00.3: MDIO device at address 9 is missing.
[ 13.346843] mdio_bus 0000:00:00.3: MDIO device at address 10 is missing.
[ 13.353605] pci 0000:00:00.4: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.360085] pci 0000:00:00.4: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.366516] pci 0000:00:00.5: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.372992] pci 0000:00:00.5: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.379458] mscc_felix 0000:00:00.5: Linked as a consumer to 5000000.iommu
[ 13.386387] mscc_felix 0000:00:00.5: Adding to iommu group 10
[ 13.392299] mscc_felix 0000:00:00.5: enabling device (0404 -> 0406)
[ 13.405882] libphy: VSC9959 internal MDIO bus: probed
[ 13.410978] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0
[ 13.417801] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1
[ 13.424626] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2
[ 13.431447] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3
[ 13.453501] mscc_felix 0000:00:00.5 swp0 (uninitialized): error -19 setting up PHY for tree 0, switch 0, port 0
[ 13.463722] mscc_felix 0000:00:00.5 swp1 (uninitialized): error -19 setting up PHY for tree 0, switch 0, port 1
[ 13.473944] mscc_felix 0000:00:00.5 swp2 (uninitialized): error -19 setting up PHY for tree 0, switch 0, port 2
[ 13.484136] mscc_felix 0000:00:00.5 swp3 (uninitialized): error -19 setting up PHY for tree 0, switch 0, port 3
[ 13.494329] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[ 13.501527] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off
[ 13.509099] mscc_felix 0000:00:00.5: Linked as a consumer to 0000:00:00.2
[ 13.515924] device eth2 entered promiscuous mode
[ 13.520585] DSA: tree 0 setup
[ 13.523614] pci 0000:00:00.6: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.530097] pci 0000:00:00.6: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.536586] fsl_enetc 0000:00:00.6: Linked as a consumer to 5000000.iommu
[ 13.543434] fsl_enetc 0000:00:00.6: Adding to iommu group 11
[ 13.549232] fsl_enetc 0000:00:00.6: device is disabled, skipping
[ 13.555296] pci 0000:00:1f.0: calling quirk_fsl_no_msi+0x0/0x30 @ 89
[ 13.561773] pci 0000:00:1f.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs
[ 13.568177] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null)
[ 13.576001] pcieport 0000:00:1f.0: PME: Signaling with IRQ 129
[ 13.582037] pcieport 0000:00:1f.0: AER: enabled with IRQ 129
[ 13.588437] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 25, base_baud = 12500000) is a FSL_LPUART
[ 13.598727] VDDIO: Bringing 1500000uV into 1800000-1800000uV
[ 13.605716] initcall deferred_probe_initcall+0x0/0xc0 returned 0 after 1452145 usecs
[ 13.613523] calling genpd_power_off_unused+0x0/0xa0 @ 1
[ 13.618868] initcall genpd_power_off_unused+0x0/0xa0 returned 0 after 0 usecs
[ 13.626039] calling genpd_debug_init+0x0/0x98 @ 1
[ 13.630862] initcall genpd_debug_init+0x0/0x98 returned 0 after 8 usecs
[ 13.637510] calling gpio_keys_init+0x0/0x30 @ 1
[ 13.644616] input: buttons0 as /devices/platform/buttons0/input/input1
[ 13.651361] initcall gpio_keys_init+0x0/0x30 returned 0 after 8991 usecs
[ 13.658120] calling register_update_efi_random_seed+0x0/0x44 @ 1
[ 13.664249] initcall register_update_efi_random_seed+0x0/0x44 returned 0 after 0 usecs
[ 13.672215] calling efi_shutdown_init+0x0/0x68 @ 1
[ 13.677119] initcall efi_shutdown_init+0x0/0x68 returned -19 after 0 usecs
[ 13.684028] calling efi_earlycon_unmap_fb+0x0/0x4c @ 1
[ 13.689281] initcall efi_earlycon_unmap_fb+0x0/0x4c returned 0 after 0 usecs
[ 13.696364] calling of_fdt_raw_init+0x0/0x94 @ 1
[ 13.701145] initcall of_fdt_raw_init+0x0/0x94 returned 0 after 50 usecs
[ 13.707797] calling tcp_congestion_default+0x0/0x34 @ 1
[ 13.713138] initcall tcp_congestion_default+0x0/0x34 returned 0 after 1 usecs
[ 13.720308] calling ip_auto_config+0x0/0xea8 @ 1
[ 13.725050] initcall ip_auto_config+0x0/0xea8 returned 0 after 12 usecs
[ 13.731698] calling init_amu_fie+0x0/0x29c @ 1
[ 13.736257] initcall init_amu_fie+0x0/0x29c returned 0 after 1 usecs
[ 13.742641] calling software_resume+0x0/0x1c0 @ 1
[ 13.747462] initcall software_resume+0x0/0x1c0 returned -2 after 1 usecs
[ 13.754195] calling trace_eval_sync+0x0/0x34 @ 1
[ 13.758938] initcall trace_eval_sync+0x0/0x34 returned 0 after 11 usecs
[ 13.765592] calling clear_boot_tracer+0x0/0x44 @ 1
[ 13.770500] initcall clear_boot_tracer+0x0/0x44 returned 0 after 0 usecs
[ 13.777236] calling acpi_gpio_handle_deferred_request_irqs+0x0/0xb4 @ 1
[ 13.783976] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0xb4 returned 0 after 0 usecs
[ 13.792543] calling fb_logo_late_init+0x0/0x24 @ 1
[ 13.797442] initcall fb_logo_late_init+0x0/0x24 returned 0 after 0 usecs
[ 13.804173] calling clk_disable_unused+0x0/0xe0 @ 1
[ 13.809185] initcall clk_disable_unused+0x0/0xe0 returned 0 after 21 usecs
[ 13.816095] calling regulator_init_complete+0x0/0x5c @ 1
[ 13.821519] initcall regulator_init_complete+0x0/0x5c returned 0 after 1 usecs
[ 13.828792] calling of_platform_sync_state_init+0x0/0x28 @ 1
[ 13.834577] initcall of_platform_sync_state_init+0x0/0x28 returned 0 after 0 usecs
[ 13.842190] calling alsa_sound_last_init+0x0/0x98 @ 1
[ 13.847355] ALSA device list:
[ 13.850335] No soundcards found.
[ 13.853744] initcall alsa_sound_last_init+0x0/0x98 returned 0 after 6239 usecs
[ 13.864983] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 13.872341] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 13.885041] EXT4-fs (mmcblk0p2): recovery complete
[ 13.891415] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 13.901267] VFS: Mounted root (ext4 filesystem) readonly on device 179:34.
[ 13.908420] devtmpfs: mounted
[ 13.916116] Freeing unused kernel memory: 4800K
[ 13.925996] Missing param value! Expected 'debug=...value...'
[ 13.931775] Missing param value! Expected 'rootwait=...value...'
[ 13.937808] Missing param value! Expected 'initcall_debug=...value...'
[ 13.944365] Run /sbin/init as init process
[ 13.948480] with arguments:
[ 13.951457] /sbin/init
[ 13.954174] with environment:
[ 13.957321] HOME=/
[ 13.959689] TERM=linux
[ 13.990473] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
next prev parent reply other threads:[~2021-01-19 10:57 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 3:16 [PATCH v1 0/5] Enable fw_devlink=on by default Saravana Kannan
2020-12-18 3:16 ` [PATCH v1 1/5] driver core: Add debug logs for device link related probe deferrals Saravana Kannan
2020-12-18 3:17 ` [PATCH v1 2/5] driver core: Add device link support for INFERRED flag Saravana Kannan
2020-12-18 3:17 ` [PATCH v1 3/5] driver core: Have fw_devlink use DL_FLAG_INFERRED Saravana Kannan
2020-12-18 3:17 ` [PATCH v1 4/5] driver core: Handle cycles in device links created by fw_devlink Saravana Kannan
2020-12-18 6:39 ` kernel test robot
2020-12-18 6:39 ` kernel test robot
2020-12-18 6:39 ` [RFC PATCH] driver core: fw_devlink_relax_cycle() can be static kernel test robot
2020-12-18 6:39 ` kernel test robot
2020-12-18 6:48 ` [PATCH v1 4/5] driver core: Handle cycles in device links created by fw_devlink kernel test robot
2020-12-18 6:48 ` kernel test robot
2020-12-18 7:12 ` kernel test robot
2020-12-18 7:12 ` kernel test robot
2020-12-18 3:17 ` [PATCH v1 5/5] driver core: Set fw_devlink=on by default Saravana Kannan
[not found] ` <CGME20210111111245eucas1p15acde7ecc2ca7f7782beb8ed74c72022@eucas1p1.samsung.com>
2021-01-11 11:12 ` Marek Szyprowski
[not found] ` <CGME20210111141814eucas1p1f388df07b789693a999042b27f0d8c2a@eucas1p1.samsung.com>
2021-01-11 14:18 ` Marek Szyprowski
2021-01-11 21:47 ` Saravana Kannan
2021-01-12 7:11 ` Marek Szyprowski
2021-01-12 20:51 ` Saravana Kannan
2021-01-13 7:04 ` Marek Szyprowski
2021-01-13 19:23 ` Saravana Kannan
2021-01-14 7:36 ` Marek Szyprowski
2021-01-14 18:08 ` Saravana Kannan
2021-01-18 17:43 ` Geert Uytterhoeven
2021-01-17 23:01 ` Michael Walle
2021-01-18 21:01 ` Saravana Kannan
2021-01-19 10:41 ` Michael Walle [this message]
2021-01-20 0:00 ` Saravana Kannan
2021-01-18 17:39 ` Geert Uytterhoeven
2021-01-18 17:59 ` Marc Zyngier
2021-01-18 19:16 ` Geert Uytterhoeven
2021-01-18 19:30 ` Marc Zyngier
2021-01-18 21:18 ` Saravana Kannan
2021-01-19 9:05 ` Geert Uytterhoeven
2021-01-19 18:08 ` Saravana Kannan
2021-01-19 21:50 ` Saravana Kannan
2021-01-20 9:40 ` Geert Uytterhoeven
2021-01-20 14:26 ` Geert Uytterhoeven
2021-01-20 17:22 ` Saravana Kannan
2021-01-21 16:04 ` Geert Uytterhoeven
2021-01-25 23:30 ` Saravana Kannan
2021-01-26 8:25 ` Geert Uytterhoeven
2021-01-20 9:11 ` Geert Uytterhoeven
2021-01-21 8:22 ` [TEST PATCH v1] driver: core: Make fw_devlink=on more forgiving Saravana Kannan
2021-01-21 8:27 ` Saravana Kannan
2021-01-21 10:37 ` Geert Uytterhoeven
2021-01-22 1:07 ` Saravana Kannan
2021-01-21 10:33 ` Marek Szyprowski
2021-01-25 17:05 ` [PATCH v1 5/5] driver core: Set fw_devlink=on by default Tudor.Ambarus
2021-01-25 18:16 ` Saravana Kannan
2021-01-28 10:59 ` Tudor.Ambarus
2021-01-28 17:04 ` Saravana Kannan
2021-02-10 5:54 ` Guenter Roeck
2021-02-10 8:20 ` Saravana Kannan
2021-02-10 15:10 ` Guenter Roeck
2021-02-10 20:52 ` Saravana Kannan
2021-02-10 21:21 ` Guenter Roeck
2021-02-17 2:39 ` Saravana Kannan
2021-02-17 3:05 ` Guenter Roeck
2021-02-17 3:13 ` Saravana Kannan
2020-12-18 21:11 ` [PATCH v1 0/5] Enable " Saravana Kannan
2020-12-21 8:18 ` Jisheng Zhang
[not found] ` <CAHp75VfqL1QuvjCZ7p23e_2qhY3DUgVNaS--Uk1mEoEHsD8GBA@mail.gmail.com>
2021-01-14 16:49 ` Saravana Kannan
2020-12-21 9:48 ` Rafael J. Wysocki
2021-01-07 20:05 ` Greg Kroah-Hartman
2021-01-07 21:53 ` Saravana Kannan
2021-01-13 11:11 ` Marc Zyngier
2021-01-13 15:27 ` Jon Hunter
2021-01-13 21:29 ` Saravana Kannan
2021-01-14 11:34 ` Jon Hunter
2021-01-14 16:40 ` Saravana Kannan
2021-01-14 16:47 ` Jon Hunter
2021-01-14 16:52 ` Saravana Kannan
2021-01-14 18:55 ` Jon Hunter
2021-01-14 21:50 ` Saravana Kannan
2021-01-15 16:12 ` Jon Hunter
2021-01-15 17:44 ` Saravana Kannan
2021-01-13 20:56 ` Saravana Kannan
2021-01-13 11:30 ` Jon Hunter
2021-01-13 21:26 ` Saravana Kannan
2021-01-14 16:11 ` Jon Hunter
2021-01-14 16:47 ` Saravana Kannan
2021-01-14 16:56 ` Jon Hunter
2021-01-28 15:03 ` Jon Hunter
2021-01-28 17:27 ` Saravana Kannan
2021-02-11 0:02 ` Saravana Kannan
2021-02-11 15:03 ` Rafael J. Wysocki
2021-02-11 17:14 ` Saravana Kannan
2021-02-11 17:48 ` Rafael J. Wysocki
2021-02-12 3:04 ` Saravana Kannan
2021-01-13 11:44 ` Nicolas Saenz Julienne
2021-01-13 11:48 ` Marc Zyngier
2021-01-13 21:27 ` Saravana Kannan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4b9ae679b6f76d2f7e340e2ec229dd53@walle.cc \
--to=michael@walle.cc \
--cc=Jisheng.Zhang@synaptics.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.stultz@linaro.org \
--cc=kernel-team@android.com \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=maz@kernel.org \
--cc=minghuan.Lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=nsaenzjulienne@suse.de \
--cc=rafael@kernel.org \
--cc=roy.zang@nxp.com \
--cc=saravanak@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.