* [PATCH] arm64: zynqmp: Do not assing MIO34 that early on zcu100
@ 2019-12-03 15:23 Michal Simek
0 siblings, 0 replies; only message in thread
From: Michal Simek @ 2019-12-03 15:23 UTC (permalink / raw
To: u-boot
MIO34 is connected to POWER_KILL signal. When MIO configuration is done in
psu_init() and this pin is assigned to PMU but PMU configuration is not
loaded yet. PMU gpio output is high that means board is powered off
immediately.
The patch is fixing this sequence that MIO34 stays assing to ps gpio IP.
PMU config is loaded in SPL and then pin assigned to PMU through
psu_post_config_data().
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/mach-zynqmp/psu_spl_init.c | 9 +++++++++
arch/arm/mach-zynqmp/spl.c | 1 +
board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c | 7 ++++++-
3 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-zynqmp/psu_spl_init.c b/arch/arm/mach-zynqmp/psu_spl_init.c
index b357de32358c..b6abdfd608ee 100644
--- a/arch/arm/mach-zynqmp/psu_spl_init.c
+++ b/arch/arm/mach-zynqmp/psu_spl_init.c
@@ -77,3 +77,12 @@ __weak int psu_init(void)
*/
return -1;
}
+
+__weak unsigned long psu_post_config_data(void)
+{
+ /*
+ * This function is overridden by the one in
+ * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists.
+ */
+ return 0;
+}
diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index 6ba42bb42f62..6551b33f42d0 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -60,6 +60,7 @@ void spl_board_init(void)
preloader_console_init();
ps_mode_reset(MODE_RESET);
board_init();
+ psu_post_config_data();
}
#endif
diff --git a/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c
index e1fdabaeb9d1..585b3afc218a 100644
--- a/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c
+++ b/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c
@@ -409,7 +409,6 @@ static unsigned long psu_mio_init_data(void)
psu_mask_write(0xFF18007C, 0x000000FEU, 0x00000000U);
psu_mask_write(0xFF180080, 0x000000FEU, 0x00000008U);
psu_mask_write(0xFF180084, 0x000000FEU, 0x00000008U);
- psu_mask_write(0xFF180088, 0x000000FEU, 0x00000008U);
psu_mask_write(0xFF18008C, 0x000000FEU, 0x00000000U);
psu_mask_write(0xFF180090, 0x000000FEU, 0x00000000U);
psu_mask_write(0xFF180094, 0x000000FEU, 0x00000000U);
@@ -990,3 +989,9 @@ int psu_init(void)
return 1;
return 0;
}
+
+unsigned long psu_post_config_data(void)
+{
+ psu_mask_write(0xFF180088, 0x000000FEU, 0x00000008U);
+ return 0;
+}
--
2.24.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-12-03 15:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-03 15:23 [PATCH] arm64: zynqmp: Do not assing MIO34 that early on zcu100 Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.