From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <55804B8B.1030907@linux.intel.com> Date: Tue, 16 Jun 2015 18:15:07 +0200 From: Frederic Danis MIME-Version: 1.0 To: Marcel Holtmann CC: Ilya Faenson , linux-bluetooth@vger.kernel.org Subject: Re: [PATCH] BlueZ line discipline baud rate setting update References: <1434387007-3666-1-git-send-email-ifaenson@broadcom.com> <1434387007-3666-2-git-send-email-ifaenson@broadcom.com> <5A718AB3-958E-415A-B60E-4BC4827DB583@holtmann.org> <557FE1C9.6020001@linux.intel.com> In-Reply-To: Content-Type: text/plain; charset=windows-1252; format=flowed Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hello Marcel, On 16/06/2015 16:36, Marcel Holtmann wrote: > Hi Fred, > > >>> Bring the tty into a known 8 bits, 1 start bit, 1 stop bit, > >>> hardware flow control state with a given baud rate. > >>> > >>> Signed-off-by: Ilya Faenson > >>> --- > >>> drivers/bluetooth/hci_ldisc.c | 9 ++++++++- > >>> 1 file changed, 8 insertions(+), 1 deletion(-) > >>> > >>> diff --git a/drivers/bluetooth/hci_ldisc.c > b/drivers/bluetooth/hci_ldisc.c > >>> index ac87346..606cc5a 100644 > >>> --- a/drivers/bluetooth/hci_ldisc.c > >>> +++ b/drivers/bluetooth/hci_ldisc.c > >>> @@ -271,9 +271,16 @@ void hci_uart_set_baudrate(struct hci_uart > *hu, unsigned int speed) > >>> struct tty_struct *tty = hu->tty; > >>> struct ktermios ktermios; > >>> > >>> + /* Bring the UART into a known state with a given baud rate */ > >>> ktermios = tty->termios; > >>> ktermios.c_cflag &= ~CBAUD; > >>> - ktermios.c_cflag |= BOTHER; > >>> + ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | > >>> + IGNCR | ICRNL | IXON); > >> > >> I think this one needs to align like this: > >> > >> &= ~(IGNBRK | .. | > >> IGNCR | ..); > >> > >> However I can fix that one easily inline. So no worries. > >> > >> Fred, can you test this patch so I can add a Tested-by line. > > > > OK, I will test it. > > > > Btw, I thought that this function should only change the UART speed. > > For other UART parameters, I thought they should be set by btattach, > ACPI or DT part. > > do you think we want this split out into one hci_uart_reset_termios or > something and one that actually changes the baud rate. That seems fair > to me as well so then the individual vendor code can pick and choose > what they want to do. Yes. Imo, the question is to know who will be responsible to open the serial port and configure it: - from user space using btattach or bluetoothd (as you wrote in a previous mail), may be based on uevent giving those info, - or from kernel space, which will imply to have all info from ACPI or DT Regards Fred