* P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
@ 2015-07-09 14:19 Siva Borra
2015-07-14 10:01 ` Luo Zhenhua
0 siblings, 1 reply; 7+ messages in thread
From: Siva Borra @ 2015-07-09 14:19 UTC (permalink / raw
To: meta-freescale@yoctoproject.org; +Cc: Adrian Dudau
Hi,
I have enabled the CONFIG_CRASH_DUMP=y
Unable to boot the image on machines, P2041rdb and p3041ds.
How could I enable and boot kernel with this option? I have provided the
commandline option "crashkernel=384M-:128M"
I have seen issues with both nfsboot and ramdisk boot.
The following is log before hang
" Flattened Device Tree blob at 0c100000
Booting using the fdt blob at 0xc100000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 12e40000, end 2ffff00e ... OK
Loading Device Tree to 03fe4000, end 03fff6f0 ... OK
"
Regards,
Siva Borra
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-09 14:19 P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot Siva Borra
@ 2015-07-14 10:01 ` Luo Zhenhua
2015-07-14 13:24 ` Alexandru Vaduva
0 siblings, 1 reply; 7+ messages in thread
From: Luo Zhenhua @ 2015-07-14 10:01 UTC (permalink / raw
To: Siva Borra, meta-freescale@yoctoproject.org
Hi,
The CONFIG_CRASH_DUMP feature is not officially supported for p2041ds and p3041ds.
Best Regards,
Zhenhua
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Siva Borra
> Sent: Thursday, July 09, 2015 10:20 PM
> To: meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel
> unable to boot
>
> Hi,
> I have enabled the CONFIG_CRASH_DUMP=y
> Unable to boot the image on machines, P2041rdb and p3041ds.
> How could I enable and boot kernel with this option? I have provided the
> commandline option "crashkernel=384M-:128M"
> I have seen issues with both nfsboot and ramdisk boot.
> The following is log before hang
> " Flattened Device Tree blob at 0c100000
> Booting using the fdt blob at 0xc100000
> Uncompressing Kernel Image ... OK
> Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
>
> Regards,
> Siva Borra
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-14 10:01 ` Luo Zhenhua
@ 2015-07-14 13:24 ` Alexandru Vaduva
2015-07-16 7:29 ` Luo Zhenhua
0 siblings, 1 reply; 7+ messages in thread
From: Alexandru Vaduva @ 2015-07-14 13:24 UTC (permalink / raw
To: Luo Zhenhua, Siva Borra, meta-freescale@yoctoproject.org
Hello,
I also require the full support for kdump and kexec.
Do you have available the according patches necessary for enabling this support?
The same applies for the NUMA support on PPC32.
If you guys able to help me with this, or direct me to the correct source I would be more then happy.
Thanks for all the help,
Alex V.
-----Original Message-----
From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Luo Zhenhua
Sent: Tuesday, July 14, 2015 1:02 PM
To: Siva Borra; meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
Hi,
The CONFIG_CRASH_DUMP feature is not officially supported for p2041ds and p3041ds.
Best Regards,
Zhenhua
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Siva Borra
> Sent: Thursday, July 09, 2015 10:20 PM
> To: meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel
> unable to boot
>
> Hi,
> I have enabled the CONFIG_CRASH_DUMP=y Unable to boot the image on
> machines, P2041rdb and p3041ds.
> How could I enable and boot kernel with this option? I have provided
> the commandline option "crashkernel=384M-:128M"
> I have seen issues with both nfsboot and ramdisk boot.
> The following is log before hang
> " Flattened Device Tree blob at 0c100000
> Booting using the fdt blob at 0xc100000
> Uncompressing Kernel Image ... OK
> Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
>
> Regards,
> Siva Borra
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
--
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-14 13:24 ` Alexandru Vaduva
@ 2015-07-16 7:29 ` Luo Zhenhua
2015-07-16 11:30 ` Alexandru Vaduva
0 siblings, 1 reply; 7+ messages in thread
From: Luo Zhenhua @ 2015-07-16 7:29 UTC (permalink / raw
To: Alexandru Vaduva, Siva Borra, meta-freescale@yoctoproject.org
Hello Alex,
The kexec/kdump is not officially supported for QorIQ targets currently.
You can contact with FSL FAE to submit the request, SDK team will plan effort to add the support in subsequent SDK.
Best Regards,
Zhenhua
> -----Original Message-----
> From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> Sent: Tuesday, July 14, 2015 9:25 PM
> To: Luo Zhenhua-B19537; Siva Borra; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hello,
>
> I also require the full support for kdump and kexec.
> Do you have available the according patches necessary for enabling this
> support?
> The same applies for the NUMA support on PPC32.
>
> If you guys able to help me with this, or direct me to the correct source I would
> be more then happy.
>
>
> Thanks for all the help,
> Alex V.
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Luo Zhenhua
> Sent: Tuesday, July 14, 2015 1:02 PM
> To: Siva Borra; meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hi,
>
> The CONFIG_CRASH_DUMP feature is not officially supported for p2041ds and
> p3041ds.
>
>
> Best Regards,
>
> Zhenhua
>
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> > bounces@yoctoproject.org] On Behalf Of Siva Borra
> > Sent: Thursday, July 09, 2015 10:20 PM
> > To: meta-freescale@yoctoproject.org
> > Cc: Adrian Dudau
> > Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel
> > unable to boot
> >
> > Hi,
> > I have enabled the CONFIG_CRASH_DUMP=y Unable to boot the image on
> > machines, P2041rdb and p3041ds.
> > How could I enable and boot kernel with this option? I have provided
> > the commandline option "crashkernel=384M-:128M"
> > I have seen issues with both nfsboot and ramdisk boot.
> > The following is log before hang
> > " Flattened Device Tree blob at 0c100000
> > Booting using the fdt blob at 0xc100000
> > Uncompressing Kernel Image ... OK
> > Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> > Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
> >
> > Regards,
> > Siva Borra
> >
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-16 7:29 ` Luo Zhenhua
@ 2015-07-16 11:30 ` Alexandru Vaduva
2015-07-20 10:47 ` Luo Zhenhua
0 siblings, 1 reply; 7+ messages in thread
From: Alexandru Vaduva @ 2015-07-16 11:30 UTC (permalink / raw
To: Luo Zhenhua, meta-freescale@yoctoproject.org; +Cc: Siva Borra
Thanks for the information.
Will you be able to help me with indications related on how a FAE request can be submitted?
From my previous interaction with you guys I know that you also have some patches are still waiting for a decision on integrating them or not.
Is there any available for kdump/kexec functionality? Also is there something available for NUMA support on this boards?
If there are could you direct me to them?
Sorry if I may be a bit pushy but I would like to know if here is this kind of support available (even as gathered patches) since this will make my patch search
work a lot easier.
Thanks,
Alex V.
-----Original Message-----
From: Luo Zhenhua [mailto:zhenhua.luo@freescale.com]
Sent: Thursday, July 16, 2015 10:29 AM
To: Alexandru Vaduva; Siva Borra; meta-freescale@yoctoproject.org
Cc: Adrian Dudau
Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
Hello Alex,
The kexec/kdump is not officially supported for QorIQ targets currently.
You can contact with FSL FAE to submit the request, SDK team will plan effort to add the support in subsequent SDK.
Best Regards,
Zhenhua
> -----Original Message-----
> From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> Sent: Tuesday, July 14, 2015 9:25 PM
> To: Luo Zhenhua-B19537; Siva Borra; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hello,
>
> I also require the full support for kdump and kexec.
> Do you have available the according patches necessary for enabling
> this support?
> The same applies for the NUMA support on PPC32.
>
> If you guys able to help me with this, or direct me to the correct
> source I would be more then happy.
>
>
> Thanks for all the help,
> Alex V.
>
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Luo Zhenhua
> Sent: Tuesday, July 14, 2015 1:02 PM
> To: Siva Borra; meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hi,
>
> The CONFIG_CRASH_DUMP feature is not officially supported for p2041ds
> and p3041ds.
>
>
> Best Regards,
>
> Zhenhua
>
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org
> > [mailto:meta-freescale- bounces@yoctoproject.org] On Behalf Of Siva
> > Borra
> > Sent: Thursday, July 09, 2015 10:20 PM
> > To: meta-freescale@yoctoproject.org
> > Cc: Adrian Dudau
> > Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > kernel unable to boot
> >
> > Hi,
> > I have enabled the CONFIG_CRASH_DUMP=y Unable to boot the image on
> > machines, P2041rdb and p3041ds.
> > How could I enable and boot kernel with this option? I have provided
> > the commandline option "crashkernel=384M-:128M"
> > I have seen issues with both nfsboot and ramdisk boot.
> > The following is log before hang
> > " Flattened Device Tree blob at 0c100000
> > Booting using the fdt blob at 0xc100000
> > Uncompressing Kernel Image ... OK
> > Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> > Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
> >
> > Regards,
> > Siva Borra
> >
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-16 11:30 ` Alexandru Vaduva
@ 2015-07-20 10:47 ` Luo Zhenhua
2015-07-20 13:18 ` Alexandru Vaduva
0 siblings, 1 reply; 7+ messages in thread
From: Luo Zhenhua @ 2015-07-20 10:47 UTC (permalink / raw
To: Alexandru Vaduva, meta-freescale@yoctoproject.org; +Cc: Siva Borra
> -----Original Message-----
> From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> Sent: Thursday, July 16, 2015 7:30 PM
> To: Luo Zhenhua-B19537; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau; Siva Borra
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Thanks for the information.
> Will you be able to help me with indications related on how a FAE request can
> be submitted?
[Luo Zhenhua-B19537] Except the meta-freescale@freescale.com, both https://community.freescale.com/welcome and support@freescale.com can be used to submit support requests.
> From my previous interaction with you guys I know that you also have some
> patches are still waiting for a decision on integrating them or not.
> Is there any available for kdump/kexec functionality? Also is there something
> available for NUMA support on this boards?
> If there are could you direct me to them?
[Luo Zhenhua-B19537] Frankly I don't know about those kexec/kdump patches, maybe you can contact with the guy who provided the information to you previously.
Best Regards,
Zhenhua
> Sorry if I may be a bit pushy but I would like to know if here is this kind of
> support available (even as gathered patches) since this will make my patch
> search work a lot easier.
>
> Thanks,
> Alex V.
>
> -----Original Message-----
> From: Luo Zhenhua [mailto:zhenhua.luo@freescale.com]
> Sent: Thursday, July 16, 2015 10:29 AM
> To: Alexandru Vaduva; Siva Borra; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hello Alex,
>
> The kexec/kdump is not officially supported for QorIQ targets currently.
>
> You can contact with FSL FAE to submit the request, SDK team will plan effort to
> add the support in subsequent SDK.
>
>
> Best Regards,
>
> Zhenhua
>
> > -----Original Message-----
> > From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> > Sent: Tuesday, July 14, 2015 9:25 PM
> > To: Luo Zhenhua-B19537; Siva Borra; meta-freescale@yoctoproject.org
> > Cc: Adrian Dudau
> > Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > kernel unable to boot
> >
> > Hello,
> >
> > I also require the full support for kdump and kexec.
> > Do you have available the according patches necessary for enabling
> > this support?
> > The same applies for the NUMA support on PPC32.
> >
> > If you guys able to help me with this, or direct me to the correct
> > source I would be more then happy.
> >
> >
> > Thanks for all the help,
> > Alex V.
> >
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> > bounces@yoctoproject.org] On Behalf Of Luo Zhenhua
> > Sent: Tuesday, July 14, 2015 1:02 PM
> > To: Siva Borra; meta-freescale@yoctoproject.org
> > Subject: Re: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > kernel unable to boot
> >
> > Hi,
> >
> > The CONFIG_CRASH_DUMP feature is not officially supported for p2041ds
> > and p3041ds.
> >
> >
> > Best Regards,
> >
> > Zhenhua
> >
> > > -----Original Message-----
> > > From: meta-freescale-bounces@yoctoproject.org
> > > [mailto:meta-freescale- bounces@yoctoproject.org] On Behalf Of Siva
> > > Borra
> > > Sent: Thursday, July 09, 2015 10:20 PM
> > > To: meta-freescale@yoctoproject.org
> > > Cc: Adrian Dudau
> > > Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > > kernel unable to boot
> > >
> > > Hi,
> > > I have enabled the CONFIG_CRASH_DUMP=y Unable to boot the image on
> > > machines, P2041rdb and p3041ds.
> > > How could I enable and boot kernel with this option? I have provided
> > > the commandline option "crashkernel=384M-:128M"
> > > I have seen issues with both nfsboot and ramdisk boot.
> > > The following is log before hang
> > > " Flattened Device Tree blob at 0c100000
> > > Booting using the fdt blob at 0xc100000
> > > Uncompressing Kernel Image ... OK
> > > Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> > > Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
> > >
> > > Regards,
> > > Siva Borra
> > >
> > > --
> > > _______________________________________________
> > > meta-freescale mailing list
> > > meta-freescale@yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
2015-07-20 10:47 ` Luo Zhenhua
@ 2015-07-20 13:18 ` Alexandru Vaduva
0 siblings, 0 replies; 7+ messages in thread
From: Alexandru Vaduva @ 2015-07-20 13:18 UTC (permalink / raw
To: Luo Zhenhua, meta-freescale@yoctoproject.org; +Cc: Siva Borra
Hello again,
-----Original Message-----
From: Luo Zhenhua [mailto:zhenhua.luo@freescale.com]
Sent: Monday, July 20, 2015 1:48 PM
To: Alexandru Vaduva; meta-freescale@yoctoproject.org
Cc: Adrian Dudau; Siva Borra
Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot
> -----Original Message-----
> From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> Sent: Thursday, July 16, 2015 7:30 PM
> To: Luo Zhenhua-B19537; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau; Siva Borra
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Thanks for the information.
> Will you be able to help me with indications related on how a FAE
> request can be submitted?
[Luo Zhenhua-B19537] Except the meta-freescale@freescale.com, both https://community.freescale.com/welcome and support@freescale.com can be used to submit support requests.
OK, I will try this.
> From my previous interaction with you guys I know that you also have
> some patches are still waiting for a decision on integrating them or not.
> Is there any available for kdump/kexec functionality? Also is there
> something available for NUMA support on this boards?
> If there are could you direct me to them?
[Luo Zhenhua-B19537] Frankly I don't know about those kexec/kdump patches, maybe you can contact with the guy who provided the information to you previously.
Actually you were the person who helped me back then, the email was related to a B4860qds-64b kernel error.
Best Regards,
Zhenhua
> Sorry if I may be a bit pushy but I would like to know if here is this
> kind of support available (even as gathered patches) since this will
> make my patch search work a lot easier.
>
> Thanks,
> Alex V.
>
> -----Original Message-----
> From: Luo Zhenhua [mailto:zhenhua.luo@freescale.com]
> Sent: Thursday, July 16, 2015 10:29 AM
> To: Alexandru Vaduva; Siva Borra; meta-freescale@yoctoproject.org
> Cc: Adrian Dudau
> Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> kernel unable to boot
>
> Hello Alex,
>
> The kexec/kdump is not officially supported for QorIQ targets currently.
>
> You can contact with FSL FAE to submit the request, SDK team will plan
> effort to add the support in subsequent SDK.
>
>
> Best Regards,
>
> Zhenhua
>
> > -----Original Message-----
> > From: Alexandru Vaduva [mailto:Alexandru.Vaduva@enea.com]
> > Sent: Tuesday, July 14, 2015 9:25 PM
> > To: Luo Zhenhua-B19537; Siva Borra; meta-freescale@yoctoproject.org
> > Cc: Adrian Dudau
> > Subject: RE: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > kernel unable to boot
> >
> > Hello,
> >
> > I also require the full support for kdump and kexec.
> > Do you have available the according patches necessary for enabling
> > this support?
> > The same applies for the NUMA support on PPC32.
> >
> > If you guys able to help me with this, or direct me to the correct
> > source I would be more then happy.
> >
> >
> > Thanks for all the help,
> > Alex V.
> >
> > -----Original Message-----
> > From: meta-freescale-bounces@yoctoproject.org
> > [mailto:meta-freescale- bounces@yoctoproject.org] On Behalf Of Luo
> > Zhenhua
> > Sent: Tuesday, July 14, 2015 1:02 PM
> > To: Siva Borra; meta-freescale@yoctoproject.org
> > Subject: Re: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > kernel unable to boot
> >
> > Hi,
> >
> > The CONFIG_CRASH_DUMP feature is not officially supported for
> > p2041ds and p3041ds.
> >
> >
> > Best Regards,
> >
> > Zhenhua
> >
> > > -----Original Message-----
> > > From: meta-freescale-bounces@yoctoproject.org
> > > [mailto:meta-freescale- bounces@yoctoproject.org] On Behalf Of
> > > Siva Borra
> > > Sent: Thursday, July 09, 2015 10:20 PM
> > > To: meta-freescale@yoctoproject.org
> > > Cc: Adrian Dudau
> > > Subject: [meta-freescale] P2041RDB, P3041DS CRASH_DUMP enabled
> > > kernel unable to boot
> > >
> > > Hi,
> > > I have enabled the CONFIG_CRASH_DUMP=y Unable to boot the image on
> > > machines, P2041rdb and p3041ds.
> > > How could I enable and boot kernel with this option? I have
> > > provided the commandline option "crashkernel=384M-:128M"
> > > I have seen issues with both nfsboot and ramdisk boot.
> > > The following is log before hang
> > > " Flattened Device Tree blob at 0c100000
> > > Booting using the fdt blob at 0xc100000
> > > Uncompressing Kernel Image ... OK
> > > Loading Ramdisk to 12e40000, end 2ffff00e ... OK
> > > Loading Device Tree to 03fe4000, end 03fff6f0 ... OK "
> > >
> > > Regards,
> > > Siva Borra
> > >
> > > --
> > > _______________________________________________
> > > meta-freescale mailing list
> > > meta-freescale@yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-07-20 13:18 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-09 14:19 P2041RDB, P3041DS CRASH_DUMP enabled kernel unable to boot Siva Borra
2015-07-14 10:01 ` Luo Zhenhua
2015-07-14 13:24 ` Alexandru Vaduva
2015-07-16 7:29 ` Luo Zhenhua
2015-07-16 11:30 ` Alexandru Vaduva
2015-07-20 10:47 ` Luo Zhenhua
2015-07-20 13:18 ` Alexandru Vaduva
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.