From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751823AbbGMOwc (ORCPT ); Mon, 13 Jul 2015 10:52:32 -0400 Received: from arrakis.dune.hu ([78.24.191.176]:40773 "EHLO arrakis.dune.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751197AbbGMOw3 (ORCPT ); Mon, 13 Jul 2015 10:52:29 -0400 Message-ID: <55A3D0A4.2050201@openwrt.org> Date: Mon, 13 Jul 2015 16:52:20 +0200 From: John Crispin User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: Chunfeng Yun , Mathias Nyman CC: Mark Rutland , devicetree@vger.kernel.org, Sascha Hauer , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Felipe Balbi , Rob Herring , linux-mediatek@lists.infradead.org, Matthias Brugger , linux-arm-kernel@lists.infradead.org, Roger Quadros Subject: Re: [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller References: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com> <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> In-Reply-To: <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi there is a cross dependency between the modules. xhci-mtk.ko requires xhci.ko to be loaded. however this will look for xhci_mtk_add_ep_quirk() which is part of xhci-mtk. the modules will build but are not run time loadable. John On 08/07/2015 11:41, Chunfeng Yun wrote: > MTK xhci host controller defines some extra SW scheduling > parameters for HW to minimize the scheduling effort for > synchronous and interrupt endpoints. The parameters are > put into reseved DWs of slot context and endpoint context > > Signed-off-by: Chunfeng Yun > --- > drivers/usb/host/Kconfig | 9 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/xhci-mtk.c | 814 +++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/host/xhci-mtk.h | 108 ++++++ > drivers/usb/host/xhci-ring.c | 35 +- > drivers/usb/host/xhci.c | 19 +- > drivers/usb/host/xhci.h | 1 + > 7 files changed, 980 insertions(+), 7 deletions(-) > create mode 100644 drivers/usb/host/xhci-mtk.c > create mode 100644 drivers/usb/host/xhci-mtk.h > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 8afc3c1..2202c68 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -34,6 +34,15 @@ config USB_XHCI_PCI > config USB_XHCI_PLATFORM > tristate > > +config USB_XHCI_MTK > + tristate "xHCI support for Mediatek MT65xx" > + select USB_XHCI_PLATFORM > + depends on ARCH_MEDIATEK || COMPILE_TEST > + ---help--- > + Say 'Y' to enable the support for the xHCI host controller > + found in Mediatek MT65xx SoCs. > + If unsure, say N. > + > config USB_XHCI_MVEBU > tristate "xHCI support for Marvell Armada 375/38x" > select USB_XHCI_PLATFORM > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 754efaa..90c6eb2 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -30,6 +30,7 @@ endif > > obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o > obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o > +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o > > obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o > obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > new file mode 100644 > index 0000000..45f0606 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.c > @@ -0,0 +1,814 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "xhci.h" > +#include "xhci-mtk.h" > + > + > +#define SS_BW_BOUNDARY 51000 > +/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ > +#define HS_BW_BOUNDARY 6144 > +/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ > +#define FS_PAYLOAD_MAX 188 > + > +/* mtk scheduler bitmasks */ > +#define EP_BPKTS(p) ((p) & 0x3f) > +#define EP_BCSCOUNT(p) (((p) & 0x7) << 8) > +#define EP_BBM(p) ((p) << 11) > +#define EP_BOFFSET(p) ((p) & 0x3fff) > +#define EP_BREPEAT(p) (((p) & 0x7fff) << 16) > + > + > +struct xhci_hcd_mtk { > + struct device *dev; > + struct usb_hcd *hcd; > + struct mu3h_sch_bw_info *sch_array; > + struct regulator *vusb33; > + struct regulator *vbus; > + struct clk *sys_mac; /* sys and mac clock */ > +}; > + > + > +static int is_fs_or_ls(enum usb_device_speed speed) > +{ > + return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; > +} > + > +static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + int bw_index; > + int port_id; > + struct xhci_virt_device *virt_dev; > + > + virt_dev = xhci->devs[udev->slot_id]; > + port_id = virt_dev->real_port; > + > + if (udev->speed == USB_SPEED_SUPER) { > + if (usb_endpoint_dir_out(&ep->desc)) > + bw_index = (port_id - 1) * 2; > + else > + bw_index = (port_id - 1) * 2 + 1; > + } else { > + bw_index = port_id + xhci->num_usb3_ports - 1; > + } > + > + return bw_index; > +} > + > + > +static void setup_sch_info(struct usb_device *udev, > + struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 ep_type; > + u32 ep_interval; > + u32 max_packet_size; > + u32 max_burst; > + u32 mult; > + u32 esit_pkts; > + > + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); > + ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); > + max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); > + max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); > + mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); > + pr_debug("%s: max_burst = %d, mult = %d\n", __func__, max_burst, mult); > + > + sch_ep->ep_type = ep_type; > + sch_ep->max_packet_size = max_packet_size; > + sch_ep->esit = 1 << ep_interval; > + sch_ep->offset = 0; > + sch_ep->burst_mode = 0; > + > + if (udev->speed == USB_SPEED_HIGH) { > + sch_ep->cs_count = 0; > + /* > + * usb_20 spec section5.9 > + * a single microframe is enough for HS synchromous endpoints > + * in a interval > + */ > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + /* > + * xHCI spec section6.2.3.4 > + * @max_busrt is the number of additional transactions > + * opportunities per microframe > + */ > + sch_ep->pkts = max_burst + 1; > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (udev->speed == USB_SPEED_SUPER) { > + /* usb3_r1 spec section4.4.7 & 4.4.8 */ > + sch_ep->cs_count = 0; > + esit_pkts = (mult + 1) * (max_burst + 1); > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->pkts = esit_pkts; > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + } > + > + if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { > + if (esit_pkts <= sch_ep->esit) > + sch_ep->pkts = 1; > + else > + sch_ep->pkts = roundup_pow_of_two(esit_pkts) > + / sch_ep->esit; > + > + sch_ep->num_budget_microframes = > + DIV_ROUND_UP(esit_pkts, sch_ep->pkts); > + > + if (sch_ep->num_budget_microframes > 1) > + sch_ep->repeat = 1; > + else > + sch_ep->repeat = 0; > + } > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (is_fs_or_ls(udev->speed)) { > + /* > + * usb_20 spec section11.18.4 > + * assume worst cases > + */ > + sch_ep->repeat = 0; > + sch_ep->pkts = 1; /* at most one packet for each microframe */ > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->cs_count = 3; /* at most need 3 CS*/ > + /* one for SS and one for budgeted transaction */ > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = max_packet_size; > + } > + if (ep_type == ISOC_OUT_EP) { > + /* must never schedule a cs ISOC OUT ep */ > + sch_ep->cs_count = 0; > + /* > + * the best case FS budget assumes that 188 FS bytes > + * occur in each microframe > + */ > + sch_ep->num_budget_microframes = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX); > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + if (ep_type == ISOC_IN_EP) { > + /* at most need additional two CS. */ > + sch_ep->cs_count = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX) + 2; > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + } > +} > + > +/* Get maximum bandwidth when we schedule at offset slot. */ > +static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, u32 offset) > +{ > + u32 num_esit; > + u32 max_bw = 0; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + u32 base = offset + i * sch_ep->esit; > + > + for (j = 0; j < sch_ep->num_budget_microframes; j++) { > + if (sch_bw->bus_bw[base + j] > max_bw) > + max_bw = sch_bw->bus_bw[base + j]; > + } > + } > + return max_bw; > +} > + > +static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, int bw_cost) > +{ > + u32 num_esit; > + u32 base; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + base = sch_ep->offset + i * sch_ep->esit; > + for (j = 0; j < sch_ep->num_budget_microframes; j++) > + sch_bw->bus_bw[base + j] += bw_cost; > + } > + > +} > + > +static void debug_sch_ep(struct mu3h_sch_ep_info *sch_ep) > +{ > + pr_debug("%s:\n", __func__); > + pr_debug("sch_ep->ep_type = %d\n", sch_ep->ep_type); > + pr_debug("sch_ep->max_packet_size = %d\n", sch_ep->max_packet_size); > + pr_debug("sch_ep->esit = %d\n", sch_ep->esit); > + pr_debug("sch_ep->num_budget_microframes = %d\n", > + sch_ep->num_budget_microframes); > + pr_debug("sch_ep->bw_cost_per_microframe = %d\n", > + sch_ep->bw_cost_per_microframe); > + pr_debug("sch_ep->ep = %p\n", sch_ep->ep); > + pr_debug("sch_ep->offset = %d\n", sch_ep->offset); > + pr_debug("sch_ep->repeat = %d\n", sch_ep->repeat); > + pr_debug("sch_ep->pkts = %d\n", sch_ep->pkts); > + pr_debug("sch_ep->cs_count = %d\n", sch_ep->cs_count); > +} > + > +static int check_sch_bw(struct usb_device *udev, > + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 offset; > + u32 esit; > + u32 num_budget_microframes; > + u32 min_bw; > + u32 min_index; > + u32 worst_bw; > + u32 bw_boundary; > + > + if (sch_ep->esit > XHCI_MTK_MAX_ESIT) > + sch_ep->esit = XHCI_MTK_MAX_ESIT; > + > + esit = sch_ep->esit; > + num_budget_microframes = sch_ep->num_budget_microframes; > + > + /* > + * Search through all possible schedule microframes. > + * and find a microframe where its worst bandwidth is minimum. > + */ > + min_bw = ~0; > + min_index = 0; > + for (offset = 0; offset < esit; offset++) { > + if ((offset + num_budget_microframes) > sch_ep->esit) > + break; > + /* > + * usb_20 spec section11.18: > + * must never schedule Start-Split in Y6 > + */ > + if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) > + continue; > + > + worst_bw = get_max_bw(sch_bw, sch_ep, offset); > + if (min_bw > worst_bw) { > + min_bw = worst_bw; > + min_index = offset; > + } > + if (min_bw == 0) > + break; > + } > + sch_ep->offset = min_index; > + > + debug_sch_ep(sch_ep); > + > + bw_boundary = (udev->speed == USB_SPEED_SUPER) > + ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; > + > + /* check bandwidth */ > + if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) > + return -1; > + > + /* update bus bandwidth info */ > + update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); > + > + return 0; > +} > + > +static void debug_sch_bw(struct mu3h_sch_bw_info *sch_bw) > +{ > + int i; > + > + pr_debug("%s: bus_bw_info\n", __func__); > + for (i = 0; i < XHCI_MTK_MAX_ESIT; i++) > + pr_debug("%d ", sch_bw->bus_bw[i]); > + > + pr_debug("\n"); > +} > + > + > +static bool need_bw_sch(struct usb_host_endpoint *ep, > + enum usb_device_speed speed, int has_tt) > +{ > + /* only for periodic endpoints */ > + if (usb_endpoint_xfer_control(&ep->desc) > + || usb_endpoint_xfer_bulk(&ep->desc)) > + return false; > + /* > + * for LS & FS periodic endpoints which its device don't attach > + * to TT are also ignored, root-hub will schedule them directly > + */ > + if (is_fs_or_ls(speed) && !has_tt) > + return false; > + > + return true; > +} > + > +static int xhci_mtk_sch_init(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct mu3h_sch_bw_info *sch_array; > + int num_usb_bus; > + int i; > + > + /* ss IN and OUT are separated */ > + num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; > + > + sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); > + if (sch_array == NULL) > + return -ENOMEM; > + > + for (i = 0; i < num_usb_bus; i++) > + INIT_LIST_HEAD(&sch_array[i].bw_ep_list); > + > + mtk->sch_array = sch_array; > + > + return 0; > +} > + > + > +static void xhci_mtk_sch_exit(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + kfree(mtk->sch_array); > +} > + > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int ret = 0; > + int port_id; > + int bw_index; > + struct xhci_hcd *xhci; > + unsigned int ep_index; > + struct xhci_ep_ctx *ep_ctx; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + struct mu3h_sch_bw_info *sch_array; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + ep_index = xhci_get_endpoint_index(&ep->desc); > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); > + sch_array = mtk->sch_array; > + > + port_id = virt_dev->real_port; > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return 0; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); > + if (!sch_ep) > + return -ENOMEM; > + > + setup_sch_info(udev, ep_ctx, sch_ep); > + > + ret = check_sch_bw(udev, sch_bw, sch_ep); > + if (ret) { > + xhci_err(xhci, "Not enough bandwidth!\n"); > + kfree(sch_ep); > + return -ENOSPC; > + } > + > + list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); > + sch_ep->ep = ep; > + > + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) > + | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); > + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) > + | EP_BREPEAT(sch_ep->repeat)); > + > + debug_sch_bw(sch_bw); > + return 0; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); > + > + > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int bw_index; > + struct xhci_hcd *xhci; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_array; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + sch_array = mtk->sch_array; > + > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { > + if (sch_ep->ep == ep) { > + update_bus_bw(sch_bw, sch_ep, > + -sch_ep->bw_cost_per_microframe); > + list_del(&sch_ep->endpoint); > + kfree(sch_ep); > + break; > + } > + } > + debug_sch_bw(sch_bw); > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); > + > + > +/* > + * The TD size is the number of max packet sized packets remaining in the TD > + * (including this TRB), right shifted by 10. > + * It must fit in bits 21:17, so it can't be bigger than 31. > + */ > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + u32 max = 31; > + int remainder, td_packet_count, packet_transferred; > + unsigned int td_transfer_size = urb->transfer_buffer_length; > + unsigned int maxp; > + > + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); > + > + /* 0 for the last TRB */ > + if (td_running_total + trb_buffer_length == td_transfer_size) > + return 0; > + > + packet_transferred = td_running_total / maxp; > + td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); > + remainder = td_packet_count - packet_transferred; > + > + if (remainder > max) > + return max << 17; > + else > + return remainder << 17; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_td_remainder_quirk); > + > + > +static int xhci_mtk_setup(struct usb_hcd *hcd); > +static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { > + .extra_priv_size = sizeof(struct xhci_hcd), > + .reset = xhci_mtk_setup, > +}; > + > +static struct hc_driver __read_mostly xhci_mtk_hc_driver; > + > + > +static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) > +{ > + int ret; > + > + ret = regulator_enable(mtk->vbus); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vbus\n"); > + return ret; > + } > + > + ret = regulator_enable(mtk->vusb33); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vusb33\n"); > + regulator_disable(mtk->vbus); > + return ret; > + } > + return 0; > +} > + > +static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) > +{ > + regulator_disable(mtk->vbus); > + regulator_disable(mtk->vusb33); > +} > + > +static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) > +{ > + /* > + * As of now platform drivers don't provide MSI support so we ensure > + * here that the generic code does not try to make a pci_dev from our > + * dev struct in order to setup MSI > + */ > + xhci->quirks |= XHCI_PLAT; > + xhci->quirks |= XHCI_MTK_HOST; > + /* > + * MTK host controller gives a spurious successful event after a > + * short transfer. Ignore it. > + */ > + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; > +} > + > +/* called during probe() after chip reset completes */ > +static int xhci_mtk_setup(struct usb_hcd *hcd) > +{ > + struct xhci_hcd *xhci; > + int ret; > + > + ret = xhci_gen_setup(hcd, xhci_mtk_quirks); > + if (ret) > + return ret; > + > + if (!usb_hcd_is_primary_hcd(hcd)) > + return 0; > + > + xhci = hcd_to_xhci(hcd); > + ret = xhci_mtk_sch_init(xhci); > + if (ret) { > + kfree(xhci); > + return ret; > + } > + > + return ret; > +} > + > + > +static int xhci_mtk_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *node = pdev->dev.of_node; > + struct usb_xhci_pdata *pdata = dev_get_platdata(dev); > + struct xhci_hcd_mtk *mtk; > + const struct hc_driver *driver; > + struct xhci_hcd *xhci; > + struct resource *res; > + struct usb_hcd *hcd; > + int ret = -ENODEV; > + int irq; > + > + if (usb_disabled()) > + return -ENODEV; > + > + driver = &xhci_mtk_hc_driver; > + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > + if (!mtk) > + return -ENOMEM; > + mtk->dev = dev; > + > + mtk->sys_mac = devm_clk_get(dev, "sys_mac"); > + if (IS_ERR(mtk->sys_mac)) { > + dev_err(dev, "error to get sys_mac\n"); > + ret = PTR_ERR(mtk->sys_mac); > + goto err; > + } > + > + mtk->vbus = devm_regulator_get(dev, "reg-vbus"); > + if (IS_ERR(mtk->vbus)) { > + dev_err(dev, "fail to get vbus\n"); > + ret = PTR_ERR(mtk->vbus); > + goto err; > + } > + > + mtk->vusb33 = devm_regulator_get(dev, "reg-vusb33"); > + if (IS_ERR(mtk->vusb33)) { > + dev_err(dev, "fail to get vusb33\n"); > + ret = PTR_ERR(mtk->vusb33); > + goto err; > + } > + pm_runtime_enable(dev); > + pm_runtime_get_sync(dev); > + > + ret = xhci_mtk_ldos_enable(mtk); > + if (ret) > + goto disable_pm; > + > + ret = clk_prepare_enable(mtk->sys_mac); > + if (ret) > + goto disable_ldos; > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + goto disable_clk; > + > + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); > + if (ret) > + goto disable_clk; > + > + if (!dev->dma_mask) > + dev->dma_mask = &dev->coherent_dma_mask; > + else > + dma_set_mask(dev, DMA_BIT_MASK(32)); > + > + hcd = usb_create_hcd(driver, dev, dev_name(dev)); > + if (!hcd) { > + ret = -ENOMEM; > + goto disable_clk; > + } > + > + /* > + * USB 2.0 roothub is stored in the platform_device. > + * Swap it with mtk HCD. > + */ > + mtk->hcd = platform_get_drvdata(pdev); > + platform_set_drvdata(pdev, mtk); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + hcd->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(hcd->regs)) { > + ret = PTR_ERR(hcd->regs); > + goto put_usb2_hcd; > + } > + hcd->rsrc_start = res->start; > + hcd->rsrc_len = resource_size(res); > + > + hcd->usb_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); > + if (IS_ERR(hcd->usb_phy)) { > + ret = PTR_ERR(hcd->usb_phy); > + if (ret == -EPROBE_DEFER) > + goto put_usb2_hcd; > + hcd->usb_phy = NULL; > + } else { > + ret = usb_phy_init(hcd->usb_phy); > + if (ret) > + goto put_usb2_hcd; > + } > + > + device_wakeup_enable(hcd->self.controller); > + > + xhci = hcd_to_xhci(hcd); > + xhci->main_hcd = hcd; > + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, > + dev_name(dev), hcd); > + if (!xhci->shared_hcd) { > + ret = -ENOMEM; > + goto disable_usb_phy; > + } > + > + if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || > + (pdata && pdata->usb3_lpm_capable)) > + xhci->quirks |= XHCI_LPM_SUPPORT; > + > + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) > + xhci->shared_hcd->can_do_streams = 1; > + > + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); > + if (ret) > + goto put_usb3_hcd; > + > + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); > + if (ret) > + goto dealloc_usb2_hcd; > + > + return 0; > + > + > +dealloc_usb2_hcd: > + usb_remove_hcd(hcd); > + > +put_usb3_hcd: > + usb_put_hcd(xhci->shared_hcd); > + > +disable_usb_phy: > + usb_phy_shutdown(hcd->usb_phy); > + > +put_usb2_hcd: > + usb_put_hcd(hcd); > + > +disable_clk: > + clk_disable_unprepare(mtk->sys_mac); > + > +disable_ldos: > + xhci_mtk_ldos_disable(mtk); > + > +disable_pm: > + pm_runtime_put_sync(dev); > + pm_runtime_disable(dev); > + > +err: > + return ret; > +} > + > +static int xhci_mtk_remove(struct platform_device *dev) > +{ > + struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + usb_remove_hcd(xhci->shared_hcd); > + usb_phy_shutdown(hcd->usb_phy); > + > + usb_remove_hcd(hcd); > + usb_put_hcd(xhci->shared_hcd); > + usb_put_hcd(hcd); > + xhci_mtk_sch_exit(xhci); > + clk_disable_unprepare(mtk->sys_mac); > + xhci_mtk_ldos_disable(mtk); > + pm_runtime_put_sync(&dev->dev); > + pm_runtime_disable(&dev->dev); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int xhci_mtk_suspend(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + ret = usb_phy_set_suspend(hcd->usb_phy, 1); > + /* keep on power of mac to maintain register, and only close clock */ > + clk_disable_unprepare(mtk->sys_mac); > + return ret; > +} > + > +static int xhci_mtk_resume(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + clk_prepare_enable(mtk->sys_mac); > + ret = usb_phy_set_suspend(hcd->usb_phy, 0); > + > + return ret; > +} > + > +static const struct dev_pm_ops xhci_mtk_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > +}; > +#define DEV_PM_OPS (&xhci_mtk_pm_ops) > +#else > +#define DEV_PM_OPS NULL > +#endif /* CONFIG_PM */ > + > +#ifdef CONFIG_OF > +static const struct of_device_id mtk_xhci_of_match[] = { > + { .compatible = "mediatek,mt8173-xhci"}, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); > +#endif > + > +static struct platform_driver mtk_xhci_driver = { > + .probe = xhci_mtk_probe, > + .remove = xhci_mtk_remove, > + .driver = { > + .name = "xhci-mtk", > + .pm = DEV_PM_OPS, > + .of_match_table = of_match_ptr(mtk_xhci_of_match), > + }, > +}; > + > +static int __init xhci_mtk_init(void) > +{ > + xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > + return platform_driver_register(&mtk_xhci_driver); > +} > +module_init(xhci_mtk_init); > + > +static void __exit xhci_mtk_exit(void) > +{ > + platform_driver_unregister(&mtk_xhci_driver); > +} > +module_exit(xhci_mtk_exit); > + > +MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); > +MODULE_LICENSE("GPL v2"); > + > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > new file mode 100644 > index 0000000..e0fdd19 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.h > @@ -0,0 +1,108 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef _XHCI_MTK_H_ > +#define _XHCI_MTK_H_ > + > +#include "xhci.h" > + > +/** > + * To simplify scheduler algorithm, set a upper limit for ESIT, > + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, > + * round down to the limit value, that means allocating more > + * bandwidth to it. > + */ > +#define XHCI_MTK_MAX_ESIT 64 > + > +/** > + * struct mu3h_sch_bw_info > + * @bus_bw: array to keep track of bandwidth already used at each uframes > + * @bw_ep_list: eps in the bandwidth domain > + * > + * treat a HS root port as a bandwidth domain, but treat a SS root port as > + * two bandwidth domains, one for IN eps and another for OUT eps. > + */ > +struct mu3h_sch_bw_info { > + u32 bus_bw[XHCI_MTK_MAX_ESIT]; > + struct list_head bw_ep_list; > +}; > + > +/** > + * struct mu3h_sch_ep_info > + * @esit: unit is 125us, equal to 2 << Interval field in ep-context > + * @num_budget_microframes: number of continuous uframes > + * (@repeat==1) scheduled within the interval > + * @ep: address of usb_host_endpoint > + * @offset: which uframe of the interval that transfer should be > + * scheduled first time within the interval > + * @repeat: the time gap between two uframes that transfers are > + * scheduled within a interval. in the simple algorithm, only > + * assign 0 or 1 to it; 0 means using only one uframe in a > + * interval, and1 means using @num_budget_microframes > + * continuous uframes > + * @pkts: number of packets to be transferred in the scheduled uframes > + * @cs_count: number of CS that host will trigger > + */ > +struct mu3h_sch_ep_info { > + u32 ep_type; > + u32 max_packet_size; > + u32 esit; > + u32 num_budget_microframes; > + u32 bw_cost_per_microframe; > + void *ep; > + struct list_head endpoint; > + > + /* mtk xhci scheduling info */ > + u32 offset; > + u32 repeat; > + u32 pkts; > + u32 cs_count; > + u32 burst_mode; > +}; > + > + > +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb); > + > +#else > +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + return 0; > +} > + > +#endif > + > +#endif /* _XHCI_MTK_H_ */ > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index 94416ff..73997a0 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -68,6 +68,7 @@ > #include > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > /* > * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA > @@ -3131,9 +3132,14 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3286,9 +3292,14 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3383,7 +3394,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field |= 0x1; > > /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ > - if (xhci->hci_version == 0x100) { > + if ((xhci->hci_version == 0x100) || (xhci->quirks & XHCI_MTK_HOST)) { > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_TX_TYPE(TRB_DATA_IN); > @@ -3407,8 +3418,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field = TRB_TYPE(TRB_DATA); > > length_field = TRB_LEN(urb->transfer_buffer_length) | > - xhci_td_remainder(urb->transfer_buffer_length) | > TRB_INTR_TARGET(0); > + > + if (xhci->quirks & XHCI_MTK_HOST) > + length_field |= xhci_mtk_td_remainder_quirk(0, > + urb->transfer_buffer_length, urb); > + else > + length_field |= xhci_td_remainder(urb->transfer_buffer_length); > + > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_DIR_IN; > @@ -3632,8 +3649,14 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, & interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > - td_len - running_total); > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, > + urb); > + } else { > + remainder = xhci_td_remainder( > + td_len - running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder( > running_total, trb_buff_len, > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 7da0d60..209fc8a 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -31,6 +31,7 @@ > > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > #define DRIVER_AUTHOR "Sarah Sharp" > #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" > @@ -623,7 +624,11 @@ int xhci_run(struct usb_hcd *hcd) > "// Set the interrupt modulation register"); > temp = readl(&xhci->ir_set->irq_control); > temp &= ~ER_IRQ_INTERVAL_MASK; > - temp |= (u32) 160; > + /* > + * the increment interval is 8 times as much as that defined > + * in xHCI spec on MTK's controller > + */ > + temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160); > writel(temp, &xhci->ir_set->irq_control); > > /* Set the HCD state before we enable the irqs */ > @@ -1688,6 +1693,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > + if (xhci->quirks & XHCI_MTK_HOST) > + xhci_mtk_drop_ep_quirk(hcd, udev, ep); > + > xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > (unsigned int) ep->desc.bEndpointAddress, > udev->slot_id, > @@ -1783,6 +1791,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > return -ENOMEM; > } > > + if (xhci->quirks & XHCI_MTK_HOST) { > + ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); > + if (ret < 0) { > + xhci_free_or_cache_endpoint_ring(xhci, > + virt_dev, ep_index); > + return ret; > + } > + } > + > ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index 31e46cc..d257ce3 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -1567,6 +1567,7 @@ struct xhci_hcd { > /* For controllers with a broken beyond repair streams implementation */ > #define XHCI_BROKEN_STREAMS (1 << 19) > #define XHCI_PME_STUCK_QUIRK (1 << 20) > +#define XHCI_MTK_HOST (1 << 21) > unsigned int num_active_eps; > unsigned int limit_active_eps; > /* There are two roothubs to keep track of bus suspend info for */ > From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Crispin Subject: Re: [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller Date: Mon, 13 Jul 2015 16:52:20 +0200 Message-ID: <55A3D0A4.2050201@openwrt.org> References: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com> <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1436348468-4126-5-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Chunfeng Yun , Mathias Nyman Cc: Mark Rutland , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Sascha Hauer , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Felipe Balbi , Rob Herring , linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Matthias Brugger , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Roger Quadros List-Id: linux-mediatek@lists.infradead.org Hi there is a cross dependency between the modules. xhci-mtk.ko requires xhci.ko to be loaded. however this will look for xhci_mtk_add_ep_quirk() which is part of xhci-mtk. the modules will build but are not run time loadable. John On 08/07/2015 11:41, Chunfeng Yun wrote: > MTK xhci host controller defines some extra SW scheduling > parameters for HW to minimize the scheduling effort for > synchronous and interrupt endpoints. The parameters are > put into reseved DWs of slot context and endpoint context > > Signed-off-by: Chunfeng Yun > --- > drivers/usb/host/Kconfig | 9 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/xhci-mtk.c | 814 +++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/host/xhci-mtk.h | 108 ++++++ > drivers/usb/host/xhci-ring.c | 35 +- > drivers/usb/host/xhci.c | 19 +- > drivers/usb/host/xhci.h | 1 + > 7 files changed, 980 insertions(+), 7 deletions(-) > create mode 100644 drivers/usb/host/xhci-mtk.c > create mode 100644 drivers/usb/host/xhci-mtk.h > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 8afc3c1..2202c68 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -34,6 +34,15 @@ config USB_XHCI_PCI > config USB_XHCI_PLATFORM > tristate > > +config USB_XHCI_MTK > + tristate "xHCI support for Mediatek MT65xx" > + select USB_XHCI_PLATFORM > + depends on ARCH_MEDIATEK || COMPILE_TEST > + ---help--- > + Say 'Y' to enable the support for the xHCI host controller > + found in Mediatek MT65xx SoCs. > + If unsure, say N. > + > config USB_XHCI_MVEBU > tristate "xHCI support for Marvell Armada 375/38x" > select USB_XHCI_PLATFORM > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 754efaa..90c6eb2 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -30,6 +30,7 @@ endif > > obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o > obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o > +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o > > obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o > obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > new file mode 100644 > index 0000000..45f0606 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.c > @@ -0,0 +1,814 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "xhci.h" > +#include "xhci-mtk.h" > + > + > +#define SS_BW_BOUNDARY 51000 > +/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ > +#define HS_BW_BOUNDARY 6144 > +/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ > +#define FS_PAYLOAD_MAX 188 > + > +/* mtk scheduler bitmasks */ > +#define EP_BPKTS(p) ((p) & 0x3f) > +#define EP_BCSCOUNT(p) (((p) & 0x7) << 8) > +#define EP_BBM(p) ((p) << 11) > +#define EP_BOFFSET(p) ((p) & 0x3fff) > +#define EP_BREPEAT(p) (((p) & 0x7fff) << 16) > + > + > +struct xhci_hcd_mtk { > + struct device *dev; > + struct usb_hcd *hcd; > + struct mu3h_sch_bw_info *sch_array; > + struct regulator *vusb33; > + struct regulator *vbus; > + struct clk *sys_mac; /* sys and mac clock */ > +}; > + > + > +static int is_fs_or_ls(enum usb_device_speed speed) > +{ > + return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; > +} > + > +static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + int bw_index; > + int port_id; > + struct xhci_virt_device *virt_dev; > + > + virt_dev = xhci->devs[udev->slot_id]; > + port_id = virt_dev->real_port; > + > + if (udev->speed == USB_SPEED_SUPER) { > + if (usb_endpoint_dir_out(&ep->desc)) > + bw_index = (port_id - 1) * 2; > + else > + bw_index = (port_id - 1) * 2 + 1; > + } else { > + bw_index = port_id + xhci->num_usb3_ports - 1; > + } > + > + return bw_index; > +} > + > + > +static void setup_sch_info(struct usb_device *udev, > + struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 ep_type; > + u32 ep_interval; > + u32 max_packet_size; > + u32 max_burst; > + u32 mult; > + u32 esit_pkts; > + > + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); > + ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); > + max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); > + max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); > + mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); > + pr_debug("%s: max_burst = %d, mult = %d\n", __func__, max_burst, mult); > + > + sch_ep->ep_type = ep_type; > + sch_ep->max_packet_size = max_packet_size; > + sch_ep->esit = 1 << ep_interval; > + sch_ep->offset = 0; > + sch_ep->burst_mode = 0; > + > + if (udev->speed == USB_SPEED_HIGH) { > + sch_ep->cs_count = 0; > + /* > + * usb_20 spec section5.9 > + * a single microframe is enough for HS synchromous endpoints > + * in a interval > + */ > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + /* > + * xHCI spec section6.2.3.4 > + * @max_busrt is the number of additional transactions > + * opportunities per microframe > + */ > + sch_ep->pkts = max_burst + 1; > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (udev->speed == USB_SPEED_SUPER) { > + /* usb3_r1 spec section4.4.7 & 4.4.8 */ > + sch_ep->cs_count = 0; > + esit_pkts = (mult + 1) * (max_burst + 1); > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->pkts = esit_pkts; > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + } > + > + if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { > + if (esit_pkts <= sch_ep->esit) > + sch_ep->pkts = 1; > + else > + sch_ep->pkts = roundup_pow_of_two(esit_pkts) > + / sch_ep->esit; > + > + sch_ep->num_budget_microframes = > + DIV_ROUND_UP(esit_pkts, sch_ep->pkts); > + > + if (sch_ep->num_budget_microframes > 1) > + sch_ep->repeat = 1; > + else > + sch_ep->repeat = 0; > + } > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (is_fs_or_ls(udev->speed)) { > + /* > + * usb_20 spec section11.18.4 > + * assume worst cases > + */ > + sch_ep->repeat = 0; > + sch_ep->pkts = 1; /* at most one packet for each microframe */ > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->cs_count = 3; /* at most need 3 CS*/ > + /* one for SS and one for budgeted transaction */ > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = max_packet_size; > + } > + if (ep_type == ISOC_OUT_EP) { > + /* must never schedule a cs ISOC OUT ep */ > + sch_ep->cs_count = 0; > + /* > + * the best case FS budget assumes that 188 FS bytes > + * occur in each microframe > + */ > + sch_ep->num_budget_microframes = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX); > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + if (ep_type == ISOC_IN_EP) { > + /* at most need additional two CS. */ > + sch_ep->cs_count = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX) + 2; > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + } > +} > + > +/* Get maximum bandwidth when we schedule at offset slot. */ > +static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, u32 offset) > +{ > + u32 num_esit; > + u32 max_bw = 0; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + u32 base = offset + i * sch_ep->esit; > + > + for (j = 0; j < sch_ep->num_budget_microframes; j++) { > + if (sch_bw->bus_bw[base + j] > max_bw) > + max_bw = sch_bw->bus_bw[base + j]; > + } > + } > + return max_bw; > +} > + > +static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, int bw_cost) > +{ > + u32 num_esit; > + u32 base; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + base = sch_ep->offset + i * sch_ep->esit; > + for (j = 0; j < sch_ep->num_budget_microframes; j++) > + sch_bw->bus_bw[base + j] += bw_cost; > + } > + > +} > + > +static void debug_sch_ep(struct mu3h_sch_ep_info *sch_ep) > +{ > + pr_debug("%s:\n", __func__); > + pr_debug("sch_ep->ep_type = %d\n", sch_ep->ep_type); > + pr_debug("sch_ep->max_packet_size = %d\n", sch_ep->max_packet_size); > + pr_debug("sch_ep->esit = %d\n", sch_ep->esit); > + pr_debug("sch_ep->num_budget_microframes = %d\n", > + sch_ep->num_budget_microframes); > + pr_debug("sch_ep->bw_cost_per_microframe = %d\n", > + sch_ep->bw_cost_per_microframe); > + pr_debug("sch_ep->ep = %p\n", sch_ep->ep); > + pr_debug("sch_ep->offset = %d\n", sch_ep->offset); > + pr_debug("sch_ep->repeat = %d\n", sch_ep->repeat); > + pr_debug("sch_ep->pkts = %d\n", sch_ep->pkts); > + pr_debug("sch_ep->cs_count = %d\n", sch_ep->cs_count); > +} > + > +static int check_sch_bw(struct usb_device *udev, > + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 offset; > + u32 esit; > + u32 num_budget_microframes; > + u32 min_bw; > + u32 min_index; > + u32 worst_bw; > + u32 bw_boundary; > + > + if (sch_ep->esit > XHCI_MTK_MAX_ESIT) > + sch_ep->esit = XHCI_MTK_MAX_ESIT; > + > + esit = sch_ep->esit; > + num_budget_microframes = sch_ep->num_budget_microframes; > + > + /* > + * Search through all possible schedule microframes. > + * and find a microframe where its worst bandwidth is minimum. > + */ > + min_bw = ~0; > + min_index = 0; > + for (offset = 0; offset < esit; offset++) { > + if ((offset + num_budget_microframes) > sch_ep->esit) > + break; > + /* > + * usb_20 spec section11.18: > + * must never schedule Start-Split in Y6 > + */ > + if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) > + continue; > + > + worst_bw = get_max_bw(sch_bw, sch_ep, offset); > + if (min_bw > worst_bw) { > + min_bw = worst_bw; > + min_index = offset; > + } > + if (min_bw == 0) > + break; > + } > + sch_ep->offset = min_index; > + > + debug_sch_ep(sch_ep); > + > + bw_boundary = (udev->speed == USB_SPEED_SUPER) > + ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; > + > + /* check bandwidth */ > + if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) > + return -1; > + > + /* update bus bandwidth info */ > + update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); > + > + return 0; > +} > + > +static void debug_sch_bw(struct mu3h_sch_bw_info *sch_bw) > +{ > + int i; > + > + pr_debug("%s: bus_bw_info\n", __func__); > + for (i = 0; i < XHCI_MTK_MAX_ESIT; i++) > + pr_debug("%d ", sch_bw->bus_bw[i]); > + > + pr_debug("\n"); > +} > + > + > +static bool need_bw_sch(struct usb_host_endpoint *ep, > + enum usb_device_speed speed, int has_tt) > +{ > + /* only for periodic endpoints */ > + if (usb_endpoint_xfer_control(&ep->desc) > + || usb_endpoint_xfer_bulk(&ep->desc)) > + return false; > + /* > + * for LS & FS periodic endpoints which its device don't attach > + * to TT are also ignored, root-hub will schedule them directly > + */ > + if (is_fs_or_ls(speed) && !has_tt) > + return false; > + > + return true; > +} > + > +static int xhci_mtk_sch_init(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct mu3h_sch_bw_info *sch_array; > + int num_usb_bus; > + int i; > + > + /* ss IN and OUT are separated */ > + num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; > + > + sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); > + if (sch_array == NULL) > + return -ENOMEM; > + > + for (i = 0; i < num_usb_bus; i++) > + INIT_LIST_HEAD(&sch_array[i].bw_ep_list); > + > + mtk->sch_array = sch_array; > + > + return 0; > +} > + > + > +static void xhci_mtk_sch_exit(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + kfree(mtk->sch_array); > +} > + > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int ret = 0; > + int port_id; > + int bw_index; > + struct xhci_hcd *xhci; > + unsigned int ep_index; > + struct xhci_ep_ctx *ep_ctx; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + struct mu3h_sch_bw_info *sch_array; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + ep_index = xhci_get_endpoint_index(&ep->desc); > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); > + sch_array = mtk->sch_array; > + > + port_id = virt_dev->real_port; > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return 0; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); > + if (!sch_ep) > + return -ENOMEM; > + > + setup_sch_info(udev, ep_ctx, sch_ep); > + > + ret = check_sch_bw(udev, sch_bw, sch_ep); > + if (ret) { > + xhci_err(xhci, "Not enough bandwidth!\n"); > + kfree(sch_ep); > + return -ENOSPC; > + } > + > + list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); > + sch_ep->ep = ep; > + > + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) > + | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); > + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) > + | EP_BREPEAT(sch_ep->repeat)); > + > + debug_sch_bw(sch_bw); > + return 0; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); > + > + > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int bw_index; > + struct xhci_hcd *xhci; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_array; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + sch_array = mtk->sch_array; > + > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { > + if (sch_ep->ep == ep) { > + update_bus_bw(sch_bw, sch_ep, > + -sch_ep->bw_cost_per_microframe); > + list_del(&sch_ep->endpoint); > + kfree(sch_ep); > + break; > + } > + } > + debug_sch_bw(sch_bw); > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); > + > + > +/* > + * The TD size is the number of max packet sized packets remaining in the TD > + * (including this TRB), right shifted by 10. > + * It must fit in bits 21:17, so it can't be bigger than 31. > + */ > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + u32 max = 31; > + int remainder, td_packet_count, packet_transferred; > + unsigned int td_transfer_size = urb->transfer_buffer_length; > + unsigned int maxp; > + > + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); > + > + /* 0 for the last TRB */ > + if (td_running_total + trb_buffer_length == td_transfer_size) > + return 0; > + > + packet_transferred = td_running_total / maxp; > + td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); > + remainder = td_packet_count - packet_transferred; > + > + if (remainder > max) > + return max << 17; > + else > + return remainder << 17; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_td_remainder_quirk); > + > + > +static int xhci_mtk_setup(struct usb_hcd *hcd); > +static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { > + .extra_priv_size = sizeof(struct xhci_hcd), > + .reset = xhci_mtk_setup, > +}; > + > +static struct hc_driver __read_mostly xhci_mtk_hc_driver; > + > + > +static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) > +{ > + int ret; > + > + ret = regulator_enable(mtk->vbus); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vbus\n"); > + return ret; > + } > + > + ret = regulator_enable(mtk->vusb33); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vusb33\n"); > + regulator_disable(mtk->vbus); > + return ret; > + } > + return 0; > +} > + > +static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) > +{ > + regulator_disable(mtk->vbus); > + regulator_disable(mtk->vusb33); > +} > + > +static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) > +{ > + /* > + * As of now platform drivers don't provide MSI support so we ensure > + * here that the generic code does not try to make a pci_dev from our > + * dev struct in order to setup MSI > + */ > + xhci->quirks |= XHCI_PLAT; > + xhci->quirks |= XHCI_MTK_HOST; > + /* > + * MTK host controller gives a spurious successful event after a > + * short transfer. Ignore it. > + */ > + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; > +} > + > +/* called during probe() after chip reset completes */ > +static int xhci_mtk_setup(struct usb_hcd *hcd) > +{ > + struct xhci_hcd *xhci; > + int ret; > + > + ret = xhci_gen_setup(hcd, xhci_mtk_quirks); > + if (ret) > + return ret; > + > + if (!usb_hcd_is_primary_hcd(hcd)) > + return 0; > + > + xhci = hcd_to_xhci(hcd); > + ret = xhci_mtk_sch_init(xhci); > + if (ret) { > + kfree(xhci); > + return ret; > + } > + > + return ret; > +} > + > + > +static int xhci_mtk_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *node = pdev->dev.of_node; > + struct usb_xhci_pdata *pdata = dev_get_platdata(dev); > + struct xhci_hcd_mtk *mtk; > + const struct hc_driver *driver; > + struct xhci_hcd *xhci; > + struct resource *res; > + struct usb_hcd *hcd; > + int ret = -ENODEV; > + int irq; > + > + if (usb_disabled()) > + return -ENODEV; > + > + driver = &xhci_mtk_hc_driver; > + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > + if (!mtk) > + return -ENOMEM; > + mtk->dev = dev; > + > + mtk->sys_mac = devm_clk_get(dev, "sys_mac"); > + if (IS_ERR(mtk->sys_mac)) { > + dev_err(dev, "error to get sys_mac\n"); > + ret = PTR_ERR(mtk->sys_mac); > + goto err; > + } > + > + mtk->vbus = devm_regulator_get(dev, "reg-vbus"); > + if (IS_ERR(mtk->vbus)) { > + dev_err(dev, "fail to get vbus\n"); > + ret = PTR_ERR(mtk->vbus); > + goto err; > + } > + > + mtk->vusb33 = devm_regulator_get(dev, "reg-vusb33"); > + if (IS_ERR(mtk->vusb33)) { > + dev_err(dev, "fail to get vusb33\n"); > + ret = PTR_ERR(mtk->vusb33); > + goto err; > + } > + pm_runtime_enable(dev); > + pm_runtime_get_sync(dev); > + > + ret = xhci_mtk_ldos_enable(mtk); > + if (ret) > + goto disable_pm; > + > + ret = clk_prepare_enable(mtk->sys_mac); > + if (ret) > + goto disable_ldos; > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + goto disable_clk; > + > + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); > + if (ret) > + goto disable_clk; > + > + if (!dev->dma_mask) > + dev->dma_mask = &dev->coherent_dma_mask; > + else > + dma_set_mask(dev, DMA_BIT_MASK(32)); > + > + hcd = usb_create_hcd(driver, dev, dev_name(dev)); > + if (!hcd) { > + ret = -ENOMEM; > + goto disable_clk; > + } > + > + /* > + * USB 2.0 roothub is stored in the platform_device. > + * Swap it with mtk HCD. > + */ > + mtk->hcd = platform_get_drvdata(pdev); > + platform_set_drvdata(pdev, mtk); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + hcd->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(hcd->regs)) { > + ret = PTR_ERR(hcd->regs); > + goto put_usb2_hcd; > + } > + hcd->rsrc_start = res->start; > + hcd->rsrc_len = resource_size(res); > + > + hcd->usb_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); > + if (IS_ERR(hcd->usb_phy)) { > + ret = PTR_ERR(hcd->usb_phy); > + if (ret == -EPROBE_DEFER) > + goto put_usb2_hcd; > + hcd->usb_phy = NULL; > + } else { > + ret = usb_phy_init(hcd->usb_phy); > + if (ret) > + goto put_usb2_hcd; > + } > + > + device_wakeup_enable(hcd->self.controller); > + > + xhci = hcd_to_xhci(hcd); > + xhci->main_hcd = hcd; > + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, > + dev_name(dev), hcd); > + if (!xhci->shared_hcd) { > + ret = -ENOMEM; > + goto disable_usb_phy; > + } > + > + if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || > + (pdata && pdata->usb3_lpm_capable)) > + xhci->quirks |= XHCI_LPM_SUPPORT; > + > + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) > + xhci->shared_hcd->can_do_streams = 1; > + > + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); > + if (ret) > + goto put_usb3_hcd; > + > + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); > + if (ret) > + goto dealloc_usb2_hcd; > + > + return 0; > + > + > +dealloc_usb2_hcd: > + usb_remove_hcd(hcd); > + > +put_usb3_hcd: > + usb_put_hcd(xhci->shared_hcd); > + > +disable_usb_phy: > + usb_phy_shutdown(hcd->usb_phy); > + > +put_usb2_hcd: > + usb_put_hcd(hcd); > + > +disable_clk: > + clk_disable_unprepare(mtk->sys_mac); > + > +disable_ldos: > + xhci_mtk_ldos_disable(mtk); > + > +disable_pm: > + pm_runtime_put_sync(dev); > + pm_runtime_disable(dev); > + > +err: > + return ret; > +} > + > +static int xhci_mtk_remove(struct platform_device *dev) > +{ > + struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + usb_remove_hcd(xhci->shared_hcd); > + usb_phy_shutdown(hcd->usb_phy); > + > + usb_remove_hcd(hcd); > + usb_put_hcd(xhci->shared_hcd); > + usb_put_hcd(hcd); > + xhci_mtk_sch_exit(xhci); > + clk_disable_unprepare(mtk->sys_mac); > + xhci_mtk_ldos_disable(mtk); > + pm_runtime_put_sync(&dev->dev); > + pm_runtime_disable(&dev->dev); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int xhci_mtk_suspend(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + ret = usb_phy_set_suspend(hcd->usb_phy, 1); > + /* keep on power of mac to maintain register, and only close clock */ > + clk_disable_unprepare(mtk->sys_mac); > + return ret; > +} > + > +static int xhci_mtk_resume(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + clk_prepare_enable(mtk->sys_mac); > + ret = usb_phy_set_suspend(hcd->usb_phy, 0); > + > + return ret; > +} > + > +static const struct dev_pm_ops xhci_mtk_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > +}; > +#define DEV_PM_OPS (&xhci_mtk_pm_ops) > +#else > +#define DEV_PM_OPS NULL > +#endif /* CONFIG_PM */ > + > +#ifdef CONFIG_OF > +static const struct of_device_id mtk_xhci_of_match[] = { > + { .compatible = "mediatek,mt8173-xhci"}, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); > +#endif > + > +static struct platform_driver mtk_xhci_driver = { > + .probe = xhci_mtk_probe, > + .remove = xhci_mtk_remove, > + .driver = { > + .name = "xhci-mtk", > + .pm = DEV_PM_OPS, > + .of_match_table = of_match_ptr(mtk_xhci_of_match), > + }, > +}; > + > +static int __init xhci_mtk_init(void) > +{ > + xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > + return platform_driver_register(&mtk_xhci_driver); > +} > +module_init(xhci_mtk_init); > + > +static void __exit xhci_mtk_exit(void) > +{ > + platform_driver_unregister(&mtk_xhci_driver); > +} > +module_exit(xhci_mtk_exit); > + > +MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); > +MODULE_LICENSE("GPL v2"); > + > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > new file mode 100644 > index 0000000..e0fdd19 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.h > @@ -0,0 +1,108 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef _XHCI_MTK_H_ > +#define _XHCI_MTK_H_ > + > +#include "xhci.h" > + > +/** > + * To simplify scheduler algorithm, set a upper limit for ESIT, > + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, > + * round down to the limit value, that means allocating more > + * bandwidth to it. > + */ > +#define XHCI_MTK_MAX_ESIT 64 > + > +/** > + * struct mu3h_sch_bw_info > + * @bus_bw: array to keep track of bandwidth already used at each uframes > + * @bw_ep_list: eps in the bandwidth domain > + * > + * treat a HS root port as a bandwidth domain, but treat a SS root port as > + * two bandwidth domains, one for IN eps and another for OUT eps. > + */ > +struct mu3h_sch_bw_info { > + u32 bus_bw[XHCI_MTK_MAX_ESIT]; > + struct list_head bw_ep_list; > +}; > + > +/** > + * struct mu3h_sch_ep_info > + * @esit: unit is 125us, equal to 2 << Interval field in ep-context > + * @num_budget_microframes: number of continuous uframes > + * (@repeat==1) scheduled within the interval > + * @ep: address of usb_host_endpoint > + * @offset: which uframe of the interval that transfer should be > + * scheduled first time within the interval > + * @repeat: the time gap between two uframes that transfers are > + * scheduled within a interval. in the simple algorithm, only > + * assign 0 or 1 to it; 0 means using only one uframe in a > + * interval, and1 means using @num_budget_microframes > + * continuous uframes > + * @pkts: number of packets to be transferred in the scheduled uframes > + * @cs_count: number of CS that host will trigger > + */ > +struct mu3h_sch_ep_info { > + u32 ep_type; > + u32 max_packet_size; > + u32 esit; > + u32 num_budget_microframes; > + u32 bw_cost_per_microframe; > + void *ep; > + struct list_head endpoint; > + > + /* mtk xhci scheduling info */ > + u32 offset; > + u32 repeat; > + u32 pkts; > + u32 cs_count; > + u32 burst_mode; > +}; > + > + > +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb); > + > +#else > +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + return 0; > +} > + > +#endif > + > +#endif /* _XHCI_MTK_H_ */ > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index 94416ff..73997a0 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -68,6 +68,7 @@ > #include > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > /* > * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA > @@ -3131,9 +3132,14 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3286,9 +3292,14 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3383,7 +3394,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field |= 0x1; > > /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ > - if (xhci->hci_version == 0x100) { > + if ((xhci->hci_version == 0x100) || (xhci->quirks & XHCI_MTK_HOST)) { > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_TX_TYPE(TRB_DATA_IN); > @@ -3407,8 +3418,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field = TRB_TYPE(TRB_DATA); > > length_field = TRB_LEN(urb->transfer_buffer_length) | > - xhci_td_remainder(urb->transfer_buffer_length) | > TRB_INTR_TARGET(0); > + > + if (xhci->quirks & XHCI_MTK_HOST) > + length_field |= xhci_mtk_td_remainder_quirk(0, > + urb->transfer_buffer_length, urb); > + else > + length_field |= xhci_td_remainder(urb->transfer_buffer_length); > + > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_DIR_IN; > @@ -3632,8 +3649,14 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, & interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > - td_len - running_total); > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, > + urb); > + } else { > + remainder = xhci_td_remainder( > + td_len - running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder( > running_total, trb_buff_len, > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 7da0d60..209fc8a 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -31,6 +31,7 @@ > > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > #define DRIVER_AUTHOR "Sarah Sharp" > #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" > @@ -623,7 +624,11 @@ int xhci_run(struct usb_hcd *hcd) > "// Set the interrupt modulation register"); > temp = readl(&xhci->ir_set->irq_control); > temp &= ~ER_IRQ_INTERVAL_MASK; > - temp |= (u32) 160; > + /* > + * the increment interval is 8 times as much as that defined > + * in xHCI spec on MTK's controller > + */ > + temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160); > writel(temp, &xhci->ir_set->irq_control); > > /* Set the HCD state before we enable the irqs */ > @@ -1688,6 +1693,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > + if (xhci->quirks & XHCI_MTK_HOST) > + xhci_mtk_drop_ep_quirk(hcd, udev, ep); > + > xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > (unsigned int) ep->desc.bEndpointAddress, > udev->slot_id, > @@ -1783,6 +1791,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > return -ENOMEM; > } > > + if (xhci->quirks & XHCI_MTK_HOST) { > + ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); > + if (ret < 0) { > + xhci_free_or_cache_endpoint_ring(xhci, > + virt_dev, ep_index); > + return ret; > + } > + } > + > ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index 31e46cc..d257ce3 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -1567,6 +1567,7 @@ struct xhci_hcd { > /* For controllers with a broken beyond repair streams implementation */ > #define XHCI_BROKEN_STREAMS (1 << 19) > #define XHCI_PME_STUCK_QUIRK (1 << 20) > +#define XHCI_MTK_HOST (1 << 21) > unsigned int num_active_eps; > unsigned int limit_active_eps; > /* There are two roothubs to keep track of bus suspend info for */ > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: blogic@openwrt.org (John Crispin) Date: Mon, 13 Jul 2015 16:52:20 +0200 Subject: [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller In-Reply-To: <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> References: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com> <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> Message-ID: <55A3D0A4.2050201@openwrt.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi there is a cross dependency between the modules. xhci-mtk.ko requires xhci.ko to be loaded. however this will look for xhci_mtk_add_ep_quirk() which is part of xhci-mtk. the modules will build but are not run time loadable. John On 08/07/2015 11:41, Chunfeng Yun wrote: > MTK xhci host controller defines some extra SW scheduling > parameters for HW to minimize the scheduling effort for > synchronous and interrupt endpoints. The parameters are > put into reseved DWs of slot context and endpoint context > > Signed-off-by: Chunfeng Yun > --- > drivers/usb/host/Kconfig | 9 + > drivers/usb/host/Makefile | 1 + > drivers/usb/host/xhci-mtk.c | 814 +++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/host/xhci-mtk.h | 108 ++++++ > drivers/usb/host/xhci-ring.c | 35 +- > drivers/usb/host/xhci.c | 19 +- > drivers/usb/host/xhci.h | 1 + > 7 files changed, 980 insertions(+), 7 deletions(-) > create mode 100644 drivers/usb/host/xhci-mtk.c > create mode 100644 drivers/usb/host/xhci-mtk.h > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 8afc3c1..2202c68 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -34,6 +34,15 @@ config USB_XHCI_PCI > config USB_XHCI_PLATFORM > tristate > > +config USB_XHCI_MTK > + tristate "xHCI support for Mediatek MT65xx" > + select USB_XHCI_PLATFORM > + depends on ARCH_MEDIATEK || COMPILE_TEST > + ---help--- > + Say 'Y' to enable the support for the xHCI host controller > + found in Mediatek MT65xx SoCs. > + If unsure, say N. > + > config USB_XHCI_MVEBU > tristate "xHCI support for Marvell Armada 375/38x" > select USB_XHCI_PLATFORM > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 754efaa..90c6eb2 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -30,6 +30,7 @@ endif > > obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o > obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o > +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o > > obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o > obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > new file mode 100644 > index 0000000..45f0606 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.c > @@ -0,0 +1,814 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "xhci.h" > +#include "xhci-mtk.h" > + > + > +#define SS_BW_BOUNDARY 51000 > +/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ > +#define HS_BW_BOUNDARY 6144 > +/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ > +#define FS_PAYLOAD_MAX 188 > + > +/* mtk scheduler bitmasks */ > +#define EP_BPKTS(p) ((p) & 0x3f) > +#define EP_BCSCOUNT(p) (((p) & 0x7) << 8) > +#define EP_BBM(p) ((p) << 11) > +#define EP_BOFFSET(p) ((p) & 0x3fff) > +#define EP_BREPEAT(p) (((p) & 0x7fff) << 16) > + > + > +struct xhci_hcd_mtk { > + struct device *dev; > + struct usb_hcd *hcd; > + struct mu3h_sch_bw_info *sch_array; > + struct regulator *vusb33; > + struct regulator *vbus; > + struct clk *sys_mac; /* sys and mac clock */ > +}; > + > + > +static int is_fs_or_ls(enum usb_device_speed speed) > +{ > + return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; > +} > + > +static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + int bw_index; > + int port_id; > + struct xhci_virt_device *virt_dev; > + > + virt_dev = xhci->devs[udev->slot_id]; > + port_id = virt_dev->real_port; > + > + if (udev->speed == USB_SPEED_SUPER) { > + if (usb_endpoint_dir_out(&ep->desc)) > + bw_index = (port_id - 1) * 2; > + else > + bw_index = (port_id - 1) * 2 + 1; > + } else { > + bw_index = port_id + xhci->num_usb3_ports - 1; > + } > + > + return bw_index; > +} > + > + > +static void setup_sch_info(struct usb_device *udev, > + struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 ep_type; > + u32 ep_interval; > + u32 max_packet_size; > + u32 max_burst; > + u32 mult; > + u32 esit_pkts; > + > + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); > + ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); > + max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); > + max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); > + mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); > + pr_debug("%s: max_burst = %d, mult = %d\n", __func__, max_burst, mult); > + > + sch_ep->ep_type = ep_type; > + sch_ep->max_packet_size = max_packet_size; > + sch_ep->esit = 1 << ep_interval; > + sch_ep->offset = 0; > + sch_ep->burst_mode = 0; > + > + if (udev->speed == USB_SPEED_HIGH) { > + sch_ep->cs_count = 0; > + /* > + * usb_20 spec section5.9 > + * a single microframe is enough for HS synchromous endpoints > + * in a interval > + */ > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + /* > + * xHCI spec section6.2.3.4 > + * @max_busrt is the number of additional transactions > + * opportunities per microframe > + */ > + sch_ep->pkts = max_burst + 1; > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (udev->speed == USB_SPEED_SUPER) { > + /* usb3_r1 spec section4.4.7 & 4.4.8 */ > + sch_ep->cs_count = 0; > + esit_pkts = (mult + 1) * (max_burst + 1); > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->pkts = esit_pkts; > + sch_ep->num_budget_microframes = 1; > + sch_ep->repeat = 0; > + } > + > + if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { > + if (esit_pkts <= sch_ep->esit) > + sch_ep->pkts = 1; > + else > + sch_ep->pkts = roundup_pow_of_two(esit_pkts) > + / sch_ep->esit; > + > + sch_ep->num_budget_microframes = > + DIV_ROUND_UP(esit_pkts, sch_ep->pkts); > + > + if (sch_ep->num_budget_microframes > 1) > + sch_ep->repeat = 1; > + else > + sch_ep->repeat = 0; > + } > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > + } else if (is_fs_or_ls(udev->speed)) { > + /* > + * usb_20 spec section11.18.4 > + * assume worst cases > + */ > + sch_ep->repeat = 0; > + sch_ep->pkts = 1; /* at most one packet for each microframe */ > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > + sch_ep->cs_count = 3; /* at most need 3 CS*/ > + /* one for SS and one for budgeted transaction */ > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = max_packet_size; > + } > + if (ep_type == ISOC_OUT_EP) { > + /* must never schedule a cs ISOC OUT ep */ > + sch_ep->cs_count = 0; > + /* > + * the best case FS budget assumes that 188 FS bytes > + * occur in each microframe > + */ > + sch_ep->num_budget_microframes = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX); > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + if (ep_type == ISOC_IN_EP) { > + /* at most need additional two CS. */ > + sch_ep->cs_count = DIV_ROUND_UP( > + sch_ep->max_packet_size, FS_PAYLOAD_MAX) + 2; > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > + } > + } > +} > + > +/* Get maximum bandwidth when we schedule at offset slot. */ > +static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, u32 offset) > +{ > + u32 num_esit; > + u32 max_bw = 0; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + u32 base = offset + i * sch_ep->esit; > + > + for (j = 0; j < sch_ep->num_budget_microframes; j++) { > + if (sch_bw->bus_bw[base + j] > max_bw) > + max_bw = sch_bw->bus_bw[base + j]; > + } > + } > + return max_bw; > +} > + > +static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, > + struct mu3h_sch_ep_info *sch_ep, int bw_cost) > +{ > + u32 num_esit; > + u32 base; > + int i; > + int j; > + > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > + for (i = 0; i < num_esit; i++) { > + base = sch_ep->offset + i * sch_ep->esit; > + for (j = 0; j < sch_ep->num_budget_microframes; j++) > + sch_bw->bus_bw[base + j] += bw_cost; > + } > + > +} > + > +static void debug_sch_ep(struct mu3h_sch_ep_info *sch_ep) > +{ > + pr_debug("%s:\n", __func__); > + pr_debug("sch_ep->ep_type = %d\n", sch_ep->ep_type); > + pr_debug("sch_ep->max_packet_size = %d\n", sch_ep->max_packet_size); > + pr_debug("sch_ep->esit = %d\n", sch_ep->esit); > + pr_debug("sch_ep->num_budget_microframes = %d\n", > + sch_ep->num_budget_microframes); > + pr_debug("sch_ep->bw_cost_per_microframe = %d\n", > + sch_ep->bw_cost_per_microframe); > + pr_debug("sch_ep->ep = %p\n", sch_ep->ep); > + pr_debug("sch_ep->offset = %d\n", sch_ep->offset); > + pr_debug("sch_ep->repeat = %d\n", sch_ep->repeat); > + pr_debug("sch_ep->pkts = %d\n", sch_ep->pkts); > + pr_debug("sch_ep->cs_count = %d\n", sch_ep->cs_count); > +} > + > +static int check_sch_bw(struct usb_device *udev, > + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) > +{ > + u32 offset; > + u32 esit; > + u32 num_budget_microframes; > + u32 min_bw; > + u32 min_index; > + u32 worst_bw; > + u32 bw_boundary; > + > + if (sch_ep->esit > XHCI_MTK_MAX_ESIT) > + sch_ep->esit = XHCI_MTK_MAX_ESIT; > + > + esit = sch_ep->esit; > + num_budget_microframes = sch_ep->num_budget_microframes; > + > + /* > + * Search through all possible schedule microframes. > + * and find a microframe where its worst bandwidth is minimum. > + */ > + min_bw = ~0; > + min_index = 0; > + for (offset = 0; offset < esit; offset++) { > + if ((offset + num_budget_microframes) > sch_ep->esit) > + break; > + /* > + * usb_20 spec section11.18: > + * must never schedule Start-Split in Y6 > + */ > + if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) > + continue; > + > + worst_bw = get_max_bw(sch_bw, sch_ep, offset); > + if (min_bw > worst_bw) { > + min_bw = worst_bw; > + min_index = offset; > + } > + if (min_bw == 0) > + break; > + } > + sch_ep->offset = min_index; > + > + debug_sch_ep(sch_ep); > + > + bw_boundary = (udev->speed == USB_SPEED_SUPER) > + ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; > + > + /* check bandwidth */ > + if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) > + return -1; > + > + /* update bus bandwidth info */ > + update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); > + > + return 0; > +} > + > +static void debug_sch_bw(struct mu3h_sch_bw_info *sch_bw) > +{ > + int i; > + > + pr_debug("%s: bus_bw_info\n", __func__); > + for (i = 0; i < XHCI_MTK_MAX_ESIT; i++) > + pr_debug("%d ", sch_bw->bus_bw[i]); > + > + pr_debug("\n"); > +} > + > + > +static bool need_bw_sch(struct usb_host_endpoint *ep, > + enum usb_device_speed speed, int has_tt) > +{ > + /* only for periodic endpoints */ > + if (usb_endpoint_xfer_control(&ep->desc) > + || usb_endpoint_xfer_bulk(&ep->desc)) > + return false; > + /* > + * for LS & FS periodic endpoints which its device don't attach > + * to TT are also ignored, root-hub will schedule them directly > + */ > + if (is_fs_or_ls(speed) && !has_tt) > + return false; > + > + return true; > +} > + > +static int xhci_mtk_sch_init(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct mu3h_sch_bw_info *sch_array; > + int num_usb_bus; > + int i; > + > + /* ss IN and OUT are separated */ > + num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; > + > + sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); > + if (sch_array == NULL) > + return -ENOMEM; > + > + for (i = 0; i < num_usb_bus; i++) > + INIT_LIST_HEAD(&sch_array[i].bw_ep_list); > + > + mtk->sch_array = sch_array; > + > + return 0; > +} > + > + > +static void xhci_mtk_sch_exit(struct xhci_hcd *xhci) > +{ > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + kfree(mtk->sch_array); > +} > + > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int ret = 0; > + int port_id; > + int bw_index; > + struct xhci_hcd *xhci; > + unsigned int ep_index; > + struct xhci_ep_ctx *ep_ctx; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + struct mu3h_sch_bw_info *sch_array; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + ep_index = xhci_get_endpoint_index(&ep->desc); > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); > + sch_array = mtk->sch_array; > + > + port_id = virt_dev->real_port; > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return 0; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); > + if (!sch_ep) > + return -ENOMEM; > + > + setup_sch_info(udev, ep_ctx, sch_ep); > + > + ret = check_sch_bw(udev, sch_bw, sch_ep); > + if (ret) { > + xhci_err(xhci, "Not enough bandwidth!\n"); > + kfree(sch_ep); > + return -ENOSPC; > + } > + > + list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); > + sch_ep->ep = ep; > + > + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) > + | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); > + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) > + | EP_BREPEAT(sch_ep->repeat)); > + > + debug_sch_bw(sch_bw); > + return 0; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); > + > + > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep) > +{ > + struct device *dev = hcd->self.controller; > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + > + int bw_index; > + struct xhci_hcd *xhci; > + struct xhci_slot_ctx *slot_ctx; > + struct xhci_virt_device *virt_dev; > + struct mu3h_sch_bw_info *sch_array; > + struct mu3h_sch_bw_info *sch_bw; > + struct mu3h_sch_ep_info *sch_ep; > + > + xhci = hcd_to_xhci(hcd); > + virt_dev = xhci->devs[udev->slot_id]; > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + sch_array = mtk->sch_array; > + > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > + usb_endpoint_type(&ep->desc), udev->speed, ep); > + > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > + return; > + > + bw_index = get_bw_index(xhci, udev, ep); > + sch_bw = &sch_array[bw_index]; > + > + list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { > + if (sch_ep->ep == ep) { > + update_bus_bw(sch_bw, sch_ep, > + -sch_ep->bw_cost_per_microframe); > + list_del(&sch_ep->endpoint); > + kfree(sch_ep); > + break; > + } > + } > + debug_sch_bw(sch_bw); > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); > + > + > +/* > + * The TD size is the number of max packet sized packets remaining in the TD > + * (including this TRB), right shifted by 10. > + * It must fit in bits 21:17, so it can't be bigger than 31. > + */ > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + u32 max = 31; > + int remainder, td_packet_count, packet_transferred; > + unsigned int td_transfer_size = urb->transfer_buffer_length; > + unsigned int maxp; > + > + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); > + > + /* 0 for the last TRB */ > + if (td_running_total + trb_buffer_length == td_transfer_size) > + return 0; > + > + packet_transferred = td_running_total / maxp; > + td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); > + remainder = td_packet_count - packet_transferred; > + > + if (remainder > max) > + return max << 17; > + else > + return remainder << 17; > +} > +EXPORT_SYMBOL_GPL(xhci_mtk_td_remainder_quirk); > + > + > +static int xhci_mtk_setup(struct usb_hcd *hcd); > +static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { > + .extra_priv_size = sizeof(struct xhci_hcd), > + .reset = xhci_mtk_setup, > +}; > + > +static struct hc_driver __read_mostly xhci_mtk_hc_driver; > + > + > +static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) > +{ > + int ret; > + > + ret = regulator_enable(mtk->vbus); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vbus\n"); > + return ret; > + } > + > + ret = regulator_enable(mtk->vusb33); > + if (ret) { > + dev_err(mtk->dev, "failed to enable vusb33\n"); > + regulator_disable(mtk->vbus); > + return ret; > + } > + return 0; > +} > + > +static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) > +{ > + regulator_disable(mtk->vbus); > + regulator_disable(mtk->vusb33); > +} > + > +static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) > +{ > + /* > + * As of now platform drivers don't provide MSI support so we ensure > + * here that the generic code does not try to make a pci_dev from our > + * dev struct in order to setup MSI > + */ > + xhci->quirks |= XHCI_PLAT; > + xhci->quirks |= XHCI_MTK_HOST; > + /* > + * MTK host controller gives a spurious successful event after a > + * short transfer. Ignore it. > + */ > + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; > +} > + > +/* called during probe() after chip reset completes */ > +static int xhci_mtk_setup(struct usb_hcd *hcd) > +{ > + struct xhci_hcd *xhci; > + int ret; > + > + ret = xhci_gen_setup(hcd, xhci_mtk_quirks); > + if (ret) > + return ret; > + > + if (!usb_hcd_is_primary_hcd(hcd)) > + return 0; > + > + xhci = hcd_to_xhci(hcd); > + ret = xhci_mtk_sch_init(xhci); > + if (ret) { > + kfree(xhci); > + return ret; > + } > + > + return ret; > +} > + > + > +static int xhci_mtk_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *node = pdev->dev.of_node; > + struct usb_xhci_pdata *pdata = dev_get_platdata(dev); > + struct xhci_hcd_mtk *mtk; > + const struct hc_driver *driver; > + struct xhci_hcd *xhci; > + struct resource *res; > + struct usb_hcd *hcd; > + int ret = -ENODEV; > + int irq; > + > + if (usb_disabled()) > + return -ENODEV; > + > + driver = &xhci_mtk_hc_driver; > + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > + if (!mtk) > + return -ENOMEM; > + mtk->dev = dev; > + > + mtk->sys_mac = devm_clk_get(dev, "sys_mac"); > + if (IS_ERR(mtk->sys_mac)) { > + dev_err(dev, "error to get sys_mac\n"); > + ret = PTR_ERR(mtk->sys_mac); > + goto err; > + } > + > + mtk->vbus = devm_regulator_get(dev, "reg-vbus"); > + if (IS_ERR(mtk->vbus)) { > + dev_err(dev, "fail to get vbus\n"); > + ret = PTR_ERR(mtk->vbus); > + goto err; > + } > + > + mtk->vusb33 = devm_regulator_get(dev, "reg-vusb33"); > + if (IS_ERR(mtk->vusb33)) { > + dev_err(dev, "fail to get vusb33\n"); > + ret = PTR_ERR(mtk->vusb33); > + goto err; > + } > + pm_runtime_enable(dev); > + pm_runtime_get_sync(dev); > + > + ret = xhci_mtk_ldos_enable(mtk); > + if (ret) > + goto disable_pm; > + > + ret = clk_prepare_enable(mtk->sys_mac); > + if (ret) > + goto disable_ldos; > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + goto disable_clk; > + > + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); > + if (ret) > + goto disable_clk; > + > + if (!dev->dma_mask) > + dev->dma_mask = &dev->coherent_dma_mask; > + else > + dma_set_mask(dev, DMA_BIT_MASK(32)); > + > + hcd = usb_create_hcd(driver, dev, dev_name(dev)); > + if (!hcd) { > + ret = -ENOMEM; > + goto disable_clk; > + } > + > + /* > + * USB 2.0 roothub is stored in the platform_device. > + * Swap it with mtk HCD. > + */ > + mtk->hcd = platform_get_drvdata(pdev); > + platform_set_drvdata(pdev, mtk); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + hcd->regs = devm_ioremap_resource(dev, res); > + if (IS_ERR(hcd->regs)) { > + ret = PTR_ERR(hcd->regs); > + goto put_usb2_hcd; > + } > + hcd->rsrc_start = res->start; > + hcd->rsrc_len = resource_size(res); > + > + hcd->usb_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); > + if (IS_ERR(hcd->usb_phy)) { > + ret = PTR_ERR(hcd->usb_phy); > + if (ret == -EPROBE_DEFER) > + goto put_usb2_hcd; > + hcd->usb_phy = NULL; > + } else { > + ret = usb_phy_init(hcd->usb_phy); > + if (ret) > + goto put_usb2_hcd; > + } > + > + device_wakeup_enable(hcd->self.controller); > + > + xhci = hcd_to_xhci(hcd); > + xhci->main_hcd = hcd; > + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, > + dev_name(dev), hcd); > + if (!xhci->shared_hcd) { > + ret = -ENOMEM; > + goto disable_usb_phy; > + } > + > + if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || > + (pdata && pdata->usb3_lpm_capable)) > + xhci->quirks |= XHCI_LPM_SUPPORT; > + > + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) > + xhci->shared_hcd->can_do_streams = 1; > + > + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); > + if (ret) > + goto put_usb3_hcd; > + > + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); > + if (ret) > + goto dealloc_usb2_hcd; > + > + return 0; > + > + > +dealloc_usb2_hcd: > + usb_remove_hcd(hcd); > + > +put_usb3_hcd: > + usb_put_hcd(xhci->shared_hcd); > + > +disable_usb_phy: > + usb_phy_shutdown(hcd->usb_phy); > + > +put_usb2_hcd: > + usb_put_hcd(hcd); > + > +disable_clk: > + clk_disable_unprepare(mtk->sys_mac); > + > +disable_ldos: > + xhci_mtk_ldos_disable(mtk); > + > +disable_pm: > + pm_runtime_put_sync(dev); > + pm_runtime_disable(dev); > + > +err: > + return ret; > +} > + > +static int xhci_mtk_remove(struct platform_device *dev) > +{ > + struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + usb_remove_hcd(xhci->shared_hcd); > + usb_phy_shutdown(hcd->usb_phy); > + > + usb_remove_hcd(hcd); > + usb_put_hcd(xhci->shared_hcd); > + usb_put_hcd(hcd); > + xhci_mtk_sch_exit(xhci); > + clk_disable_unprepare(mtk->sys_mac); > + xhci_mtk_ldos_disable(mtk); > + pm_runtime_put_sync(&dev->dev); > + pm_runtime_disable(&dev->dev); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int xhci_mtk_suspend(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + ret = usb_phy_set_suspend(hcd->usb_phy, 1); > + /* keep on power of mac to maintain register, and only close clock */ > + clk_disable_unprepare(mtk->sys_mac); > + return ret; > +} > + > +static int xhci_mtk_resume(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd = mtk->hcd; > + int ret; > + > + clk_prepare_enable(mtk->sys_mac); > + ret = usb_phy_set_suspend(hcd->usb_phy, 0); > + > + return ret; > +} > + > +static const struct dev_pm_ops xhci_mtk_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > +}; > +#define DEV_PM_OPS (&xhci_mtk_pm_ops) > +#else > +#define DEV_PM_OPS NULL > +#endif /* CONFIG_PM */ > + > +#ifdef CONFIG_OF > +static const struct of_device_id mtk_xhci_of_match[] = { > + { .compatible = "mediatek,mt8173-xhci"}, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); > +#endif > + > +static struct platform_driver mtk_xhci_driver = { > + .probe = xhci_mtk_probe, > + .remove = xhci_mtk_remove, > + .driver = { > + .name = "xhci-mtk", > + .pm = DEV_PM_OPS, > + .of_match_table = of_match_ptr(mtk_xhci_of_match), > + }, > +}; > + > +static int __init xhci_mtk_init(void) > +{ > + xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > + return platform_driver_register(&mtk_xhci_driver); > +} > +module_init(xhci_mtk_init); > + > +static void __exit xhci_mtk_exit(void) > +{ > + platform_driver_unregister(&mtk_xhci_driver); > +} > +module_exit(xhci_mtk_exit); > + > +MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); > +MODULE_LICENSE("GPL v2"); > + > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > new file mode 100644 > index 0000000..e0fdd19 > --- /dev/null > +++ b/drivers/usb/host/xhci-mtk.h > @@ -0,0 +1,108 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * Author: > + * Zhigang.Wei > + * Chunfeng.Yun > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#ifndef _XHCI_MTK_H_ > +#define _XHCI_MTK_H_ > + > +#include "xhci.h" > + > +/** > + * To simplify scheduler algorithm, set a upper limit for ESIT, > + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, > + * round down to the limit value, that means allocating more > + * bandwidth to it. > + */ > +#define XHCI_MTK_MAX_ESIT 64 > + > +/** > + * struct mu3h_sch_bw_info > + * @bus_bw: array to keep track of bandwidth already used at each uframes > + * @bw_ep_list: eps in the bandwidth domain > + * > + * treat a HS root port as a bandwidth domain, but treat a SS root port as > + * two bandwidth domains, one for IN eps and another for OUT eps. > + */ > +struct mu3h_sch_bw_info { > + u32 bus_bw[XHCI_MTK_MAX_ESIT]; > + struct list_head bw_ep_list; > +}; > + > +/** > + * struct mu3h_sch_ep_info > + * @esit: unit is 125us, equal to 2 << Interval field in ep-context > + * @num_budget_microframes: number of continuous uframes > + * (@repeat==1) scheduled within the interval > + * @ep: address of usb_host_endpoint > + * @offset: which uframe of the interval that transfer should be > + * scheduled first time within the interval > + * @repeat: the time gap between two uframes that transfers are > + * scheduled within a interval. in the simple algorithm, only > + * assign 0 or 1 to it; 0 means using only one uframe in a > + * interval, and1 means using @num_budget_microframes > + * continuous uframes > + * @pkts: number of packets to be transferred in the scheduled uframes > + * @cs_count: number of CS that host will trigger > + */ > +struct mu3h_sch_ep_info { > + u32 ep_type; > + u32 max_packet_size; > + u32 esit; > + u32 num_budget_microframes; > + u32 bw_cost_per_microframe; > + void *ep; > + struct list_head endpoint; > + > + /* mtk xhci scheduling info */ > + u32 offset; > + u32 repeat; > + u32 pkts; > + u32 cs_count; > + u32 burst_mode; > +}; > + > + > +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) > + > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > + struct usb_host_endpoint *ep); > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb); > + > +#else > +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, > + struct usb_device *udev, struct usb_host_endpoint *ep) > +{ > + return 0; > +} > + > +static inline u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > + unsigned trb_buffer_length, struct urb *urb) > +{ > + return 0; > +} > + > +#endif > + > +#endif /* _XHCI_MTK_H_ */ > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index 94416ff..73997a0 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -68,6 +68,7 @@ > #include > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > /* > * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA > @@ -3131,9 +3132,14 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3286,9 +3292,14 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, and interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, urb); > + } else { > + remainder = xhci_td_remainder( > urb->transfer_buffer_length - > running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder(running_total, > trb_buff_len, total_packet_count, urb, > @@ -3383,7 +3394,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field |= 0x1; > > /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ > - if (xhci->hci_version == 0x100) { > + if ((xhci->hci_version == 0x100) || (xhci->quirks & XHCI_MTK_HOST)) { > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_TX_TYPE(TRB_DATA_IN); > @@ -3407,8 +3418,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field = TRB_TYPE(TRB_DATA); > > length_field = TRB_LEN(urb->transfer_buffer_length) | > - xhci_td_remainder(urb->transfer_buffer_length) | > TRB_INTR_TARGET(0); > + > + if (xhci->quirks & XHCI_MTK_HOST) > + length_field |= xhci_mtk_td_remainder_quirk(0, > + urb->transfer_buffer_length, urb); > + else > + length_field |= xhci_td_remainder(urb->transfer_buffer_length); > + > if (urb->transfer_buffer_length > 0) { > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_DIR_IN; > @@ -3632,8 +3649,14 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > /* Set the TRB length, TD size, & interrupter fields. */ > if (xhci->hci_version < 0x100) { > - remainder = xhci_td_remainder( > - td_len - running_total); > + if (xhci->quirks & XHCI_MTK_HOST) { > + remainder = xhci_mtk_td_remainder_quirk( > + running_total, trb_buff_len, > + urb); > + } else { > + remainder = xhci_td_remainder( > + td_len - running_total); > + } > } else { > remainder = xhci_v1_0_td_remainder( > running_total, trb_buff_len, > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 7da0d60..209fc8a 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -31,6 +31,7 @@ > > #include "xhci.h" > #include "xhci-trace.h" > +#include "xhci-mtk.h" > > #define DRIVER_AUTHOR "Sarah Sharp" > #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" > @@ -623,7 +624,11 @@ int xhci_run(struct usb_hcd *hcd) > "// Set the interrupt modulation register"); > temp = readl(&xhci->ir_set->irq_control); > temp &= ~ER_IRQ_INTERVAL_MASK; > - temp |= (u32) 160; > + /* > + * the increment interval is 8 times as much as that defined > + * in xHCI spec on MTK's controller > + */ > + temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160); > writel(temp, &xhci->ir_set->irq_control); > > /* Set the HCD state before we enable the irqs */ > @@ -1688,6 +1693,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > + if (xhci->quirks & XHCI_MTK_HOST) > + xhci_mtk_drop_ep_quirk(hcd, udev, ep); > + > xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > (unsigned int) ep->desc.bEndpointAddress, > udev->slot_id, > @@ -1783,6 +1791,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > return -ENOMEM; > } > > + if (xhci->quirks & XHCI_MTK_HOST) { > + ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); > + if (ret < 0) { > + xhci_free_or_cache_endpoint_ring(xhci, > + virt_dev, ep_index); > + return ret; > + } > + } > + > ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index 31e46cc..d257ce3 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -1567,6 +1567,7 @@ struct xhci_hcd { > /* For controllers with a broken beyond repair streams implementation */ > #define XHCI_BROKEN_STREAMS (1 << 19) > #define XHCI_PME_STUCK_QUIRK (1 << 20) > +#define XHCI_MTK_HOST (1 << 21) > unsigned int num_active_eps; > unsigned int limit_active_eps; > /* There are two roothubs to keep track of bus suspend info for */ >