From: a.aubert@overkiz.com (Antoine Aubert)
To: linux-arm-kernel@lists.infradead.org
Subject: at91sam9 Main crystal frequency problems
Date: Mon, 7 Sep 2015 09:31:07 +0200 [thread overview]
Message-ID: <55ED3D3B.8060700@overkiz.com> (raw)
Hi,
I currently bring up a board based on AT91SAM9G25cu, and I having
problems of watchdogs resets.
We use linux-4.04 mainline, and i found some weird warnings on kernel
traces, concerning main clk.
[ 0.000000] Main crystal frequency not set, using approximate value
[ 0.000000] master clk is overclocked
[ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns,
wraps every 16777216000000000ns
[ 0.007812] Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
I set crystal clock in the DT, but it doesn't seems to work.. I feel
that the board works out of the specified range.
So here comes my questions:
Can there be a relationship with watchdog problems ? (1 per day)
Why is it that the frequency of Crystal is not found ?
I attached my DT, and kernel prints.
Thanks for your help.
--
Antoine Aubert
a.aubert at overkiz.com
-------------- next part --------------
ll /proc/device-tree/clocks/*
-r--r--r-- 1 root root 7 Sep 7 09:13 /proc/device-tree/clocks/name
/proc/device-tree/clocks/adc_op_clk:
-r--r--r-- 1 root root 4 Sep 7 09:14 #clock-cells
-r--r--r-- 1 root root 4 Sep 7 09:14 clock-frequency
-r--r--r-- 1 root root 12 Sep 7 09:14 compatible
-r--r--r-- 1 root root 4 Sep 7 09:14 linux,phandle
-r--r--r-- 1 root root 11 Sep 7 09:14 name
-r--r--r-- 1 root root 4 Sep 7 09:14 phandle
/proc/device-tree/clocks/main_xtal:
-r--r--r-- 1 root root 4 Sep 7 09:14 #clock-cells
-r--r--r-- 1 root root 4 Sep 7 09:14 clock-frequency
-r--r--r-- 1 root root 12 Sep 7 09:14 compatible
-r--r--r-- 1 root root 4 Sep 7 09:14 linux,phandle
-r--r--r-- 1 root root 10 Sep 7 09:14 name
-r--r--r-- 1 root root 4 Sep 7 09:14 phandle
/proc/device-tree/clocks/slow_xtal:
-r--r--r-- 1 root root 4 Sep 7 09:14 #clock-cells
-r--r--r-- 1 root root 4 Sep 7 09:14 clock-frequency
-r--r--r-- 1 root root 12 Sep 7 09:14 compatible
-r--r--r-- 1 root root 4 Sep 7 09:14 linux,phandle
-r--r--r-- 1 root root 10 Sep 7 09:14 name
-r--r--r-- 1 root root 4 Sep 7 09:14 phandle
-------------- next part --------------
cat /sys/kernel/debug/clk/clk_summary
clock enable_cnt prepare_cnt rate accuracy phase
----------------------------------------------------------------------------------------
slow_xtal 0 0 32768 0 0
slow_osc 0 0 32768 0 0
main_xtal 1 1 12000000 0 0
main_osc 1 1 12000000 0 0
mainck 2 2 12000000 0 0
utmick 2 2 480000000 0 0
usbck 2 2 48000000 0 0
udpck 0 0 48000000 0 0
uhpck 1 1 48000000 0 0
pllack 1 1 800000000 0 0
plladivck 1 1 400000000 0 0
smdclk 0 0 400000000 0 0
smdck 0 0 400000000 0 0
masterck 11 11 133333333 0 0
ddrck 1 1 133333333 0 0
usart3_clk 0 0 133333333 0 0
usart2_clk 0 0 133333333 0 0
usart1_clk 0 0 133333333 0 0
usart0_clk 1 1 133333333 0 0
uhphs_clk 3 3 133333333 0 0
udphs_clk 0 0 133333333 0 0
uart1_clk 0 0 133333333 0 0
uart0_clk 0 0 133333333 0 0
twi2_clk 0 0 133333333 0 0
twi1_clk 0 0 133333333 0 0
twi0_clk 0 0 133333333 0 0
tcb0_clk 2 2 133333333 0 0
ssc0_clk 0 0 133333333 0 0
spi1_clk 0 0 133333333 0 0
spi0_clk 0 0 133333333 0 0
smd_clk 0 0 133333333 0 0
pwm_clk 2 1 133333333 0 0
pioCD_clk 2 2 133333333 0 0
pioAB_clk 2 2 133333333 0 0
mci1_clk 0 0 133333333 0 0
mci0_clk 0 0 133333333 0 0
macb0_clk 2 2 133333333 0 0
dma1_clk 1 1 133333333 0 0
dma0_clk 1 1 133333333 0 0
adc_clk 0 0 133333333 0 0
adc_op_clk 0 0 5000000 0 0
slow_rc_osc 1 1 32768 50000000 0
slck 1 1 32768 50000000 0
prog0 0 0 32768 50000000 0
pck0 0 0 32768 50000000 0
prog1 0 0 32768 50000000 0
pck1 0 0 32768 50000000 0
main_rc_osc 0 0 12000000 50000000 0
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.0.4 (antoine at compile-embedded) (gcc version 4.9.1 (GCC) ) #1 Thu Sep 3 09:25:30 CEST 2015
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Overkiz Kizbox mini
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] AT91: Detected soc type: at91sam9x5
[ 0.000000] AT91: Detected soc subtype: at91sam9g25
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03dabac, node_mem_map c7ef9000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: panic=5 root=ubi0:root rootfstype=ubifs rw ubi.mtd=ubi console=ttyS0,115200 earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 125616K/131072K available (2698K kernel code, 133K rwdata, 988K rodata, 128K init, 194K bss, 5456K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03a1f54 (3688 kB)
[ 0.000000] .init : 0xc03a2000 - 0xc03c2000 ( 128 kB)
[ 0.000000] .data : 0xc03c2000 - 0xc03e37c0 ( 134 kB)
[ 0.000000] .bss : 0xc03e37c0 - 0xc0414394 ( 195 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Main crystal frequency not set, using approximate value
[ 0.000000] master clk is overclocked
[ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 16777216000000000ns
[ 0.007812] Calibrating delay loop... 198.76 BogoMIPS (lpj=775168)
[ 0.070312] pid_max: default: 32768 minimum: 301
[ 0.078125] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085937] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093750] CPU: Testing write buffer coherency: ok
[ 0.101562] Setting up static identity map for 0x20290e20 - 0x20290e9c
[ 0.109375] devtmpfs: initialized
[ 0.117187] pinctrl core: initialized pinctrl subsystem
[ 0.148437] NET: Registered protocol family 16
[ 0.156250] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.179687] AT91: Power Management
[ 0.187500] gpio-at91 fffff400.gpio: at address fefff400
[ 0.195312] gpio-at91 fffff600.gpio: at address fefff600
[ 0.203125] gpio-at91 fffff800.gpio: at address fefff800
[ 0.210937] gpio-at91 fffffa00.gpio: at address fefffa00
[ 0.218750] pinctrl-at91 ahb:apb:pinctrl at fffff400: initialized AT91 pinctrl driver
[ 0.226562] tcb_clksrc: tc0 at 16.166 MHz
[ 0.265625] at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
[ 0.281250] at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
[ 0.296875] usbcore: registered new interface driver usbfs
[ 0.296875] usbcore: registered new interface driver hub
[ 0.304687] usbcore: registered new device driver usb
[ 0.312500] Switched to clocksource tcb_clksrc
[ 0.335937] NET: Registered protocol family 2
[ 0.335937] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.343750] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.351562] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.359375] TCP: reno registered
[ 0.359375] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.367187] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.375000] NET: Registered protocol family 1
[ 0.382812] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.390625] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.398437] io scheduler noop registered (default)
[ 0.406250] f801c000.serial: ttyS1 at MMIO 0xf801c000 (irq = 30, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.414062] fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
[ 0.421875] console [ttyS0] enabled
[ 0.429687] bootconsole [earlycon0] disabled
[ 0.453125] brd: module loaded
[ 0.476562] loop: module loaded
[ 0.492187] atmel_nand 40000000.nand: Use On Flash BBT
[ 0.492187] atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
[ 0.500000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.507812] nand: AMD/Spansion S34ML01G2
[ 0.507812] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.515625] atmel_nand 40000000.nand: minimum ECC: 4 bits in 512 bytes
[ 0.523437] atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512
[ 0.531250] Bad block table found at page 65472, version 0x01
[ 0.539062] Bad block table found at page 65408, version 0x01
[ 0.546875] 2 ofpart partitions found on MTD device atmel_nand
[ 0.546875] Creating 2 MTD partitions on "atmel_nand":
[ 0.554687] 0x000000000000-0x000000020000 : "bootstrap"
[ 0.562500] 0x000000020000-0x000008000000 : "ubi"
[ 0.578125] macb f802c000.ethernet (unnamed net_device) (uninitialized): invalid hw address, using random
[ 0.585937] libphy: MACB_mii_bus: probed
[ 0.671875] macb f802c000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xf802c000 irq 26 (0a:90:3d:11:5b:1c)
[ 0.679687] macb f802c000.ethernet eth0: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=f802c000.etherne:01, irq=-1)
[ 0.687500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.695312] ehci-atmel: EHCI Atmel driver
[ 0.695312] atmel-ehci 700000.ehci: EHCI Host Controller
[ 0.703125] atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
[ 0.710937] atmel-ehci 700000.ehci: irq 32, io mem 0x00700000
[ 0.734375] atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
[ 0.734375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.742187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.750000] usb usb1: Product: EHCI Host Controller
[ 0.750000] usb usb1: Manufacturer: Linux 4.0.4 ehci_hcd
[ 0.757812] usb usb1: SerialNumber: 700000.ehci
[ 0.765625] hub 1-0:1.0: USB hub found
[ 0.765625] hub 1-0:1.0: 3 ports detected
[ 0.773437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.781250] ohci-atmel: OHCI Atmel driver
[ 0.781250] at91_ohci 600000.ohci: USB Host Controller
[ 0.789062] at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
[ 0.796875] at91_ohci 600000.ohci: irq 32, io mem 0x00600000
[ 0.859375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.867187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875000] usb usb2: Product: USB Host Controller
[ 0.875000] usb usb2: Manufacturer: Linux 4.0.4 ohci_hcd
[ 0.882812] usb usb2: SerialNumber: at91
[ 0.890625] hub 2-0:1.0: USB hub found
[ 0.890625] hub 2-0:1.0: 1 port detected
[ 0.898437] AT91: Starting after general reset
[ 0.906250] at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=1)
[ 0.914062] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.914062] usbcore: registered new interface driver usbhid
[ 0.921875] usbhid: USB HID core driver
[ 0.929687] TCP: cubic registered
[ 0.929687] NET: Registered protocol family 17
[ 0.945312] ubi0: attaching mtd1
[ 1.343750] ubi0: scanning is finished
[ 1.367187] ubi0: attached mtd1 (name "ubi", size 127 MiB)
[ 1.375000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.382812] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.390625] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.390625] ubi0: good PEBs: 1019, bad PEBs: 4, corrupted PEBs: 0
[ 1.398437] ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
[ 1.406250] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 288141040
[ 1.414062] ubi0: available PEBs: 102, total reserved PEBs: 917, PEBs reserved for bad PEB handling: 16
[ 1.421875] ubi0: background thread "ubi_bgt0d" started, PID 292
[ 1.468750] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 1.500000] UBIFS: background thread "ubifs_bgt0_7" started, PID 351
[ 1.515625] UBIFS: recovery needed
[ 1.593750] UBIFS: recovery completed
[ 1.593750] UBIFS: mounted UBI device 0, volume 7, name "root"
[ 1.601562] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.609375] UBIFS: FS size: 49393664 bytes (47 MiB, 389 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.617187] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.617187] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 778BA019-0C14-4BE8-857A-A31BF387B571, small LPT model
[ 1.625000] VFS: Mounted root (ubifs filesystem) on device 0:13.
[ 1.632812] devtmpfs: mounted
[ 1.632812] Freeing unused kernel memory: 128K (c03a2000 - c03c2000)
[ 2.695312] random: dd urandom read with 54 bits of entropy available
[ 3.000000] UBIFS: background thread "ubifs_bgt0_8" started, PID 415
[ 3.023437] UBIFS: recovery needed
[ 3.148437] UBIFS: recovery completed
[ 3.148437] UBIFS: mounted UBI device 0, volume 8, name "apps"
[ 3.156250] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.164062] UBIFS: FS size: 49393664 bytes (47 MiB, 389 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 3.171875] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 3.171875] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B11D014C-5838-40FE-AE66-E6FAE0EC2398, small LPT model
[ 5.671875] macb f802c000.ethernet eth0: link up (100/Full)
[ 10.914062] random: nonblocking pool is initialized
-------------- next part --------------
A non-text attachment was scrubbed...
Name: at91-kizboxmini.dts
Type: audio/vnd.dts
Size: 2484 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150907/06bcf6f1/attachment-0001.dts>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150907/06bcf6f1/attachment-0001.sig>
next reply other threads:[~2015-09-07 7:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-07 7:31 Antoine Aubert [this message]
2015-09-08 16:12 ` at91sam9 Main crystal frequency problems Boris Brezillon
2015-09-14 12:41 ` Antoine Aubert
2015-09-14 13:20 ` Boris Brezillon
2015-10-06 14:12 ` Boris Brezillon
2015-10-06 15:26 ` Antoine Aubert
2015-10-07 9:33 ` Sylvain Rochet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55ED3D3B.8060700@overkiz.com \
--to=a.aubert@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.