From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Eichenberger Date: Fri, 11 Sep 2015 15:50:28 +0200 Subject: [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp In-Reply-To: <55E9CA5D.6040107@denx.de> References: <55E9AE3C.2080801@netmodule.com> <55E9B568.30808@denx.de> <55E9C395.5090402@netmodule.com> <55E9CA5D.6040107@denx.de> Message-ID: <55F2DC24.9080704@netmodule.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefan, On 09/04/2015 06:44 PM, Stefan Roese wrote: >> Unfortunately u-boot now hangs if I try to load an image from the >> SD-Card: >> e.g. if I run the following command u-boot hangs: >> ext4load mmc 0:2 0x2000000 /boot/kernel.bin >> >> I don't see why exactly it crashes, it seems for me that it's always at >> a different position. >> >> Here are two backtraces, always at a different positions: >> >> Here u-boot stopped automatically: >> Program received signal SIGTRAP, Trace/breakpoint trap. >> 0x7ff65d84 in ?? () >> (gdb) backtrace >> #0 0x7ff65d84 in ?? () >> #1 0x803663d0 in ?? () >> #2 0x803663d0 in ?? () >> Backtrace stopped: previous frame identical to this frame (corrupt >> stack?) >> >> And here I've got perhaps some more information? >> Program received signal SIGSTOP, Stopped (signal). >> v7_inval_dcache_level_setway (log2_line_len=, >> way_shift=, num_ways=, >> num_sets=, level=) at >> arch/arm/cpu/armv7/cache_v7.c:62 >> 62 for (set = num_sets - 1; set >= 0; set--) { >> (gdb) backtrace >> #0 v7_inval_dcache_level_setway (log2_line_len=, >> way_shift=, >> num_ways=, num_sets=, >> level=) at arch/arm/cpu/armv7/cache_v7.c:62 >> #1 v7_maint_dcache_level_setway (operation=, level=9) at >> arch/arm/cpu/armv7/cache_v7.c:129 >> #2 v7_maint_dcache_all (operation=2146852864) at >> arch/arm/cpu/armv7/cache_v7.c:147 >> #3 0xfffffbe2 in ?? () >> #4 0xfffffbe2 in ?? () >> >> Could it be that there is something wrong with cache/dram setup? > > Maybe. Hard to tell. Why don't you use "dcache off" before you start > the command. If this works, then we still have a problem with cache > (L1 / L2)... I now did some tests, it seems that the kernel only crashes if I access the SD-Card, I'm able to load the kernel from an USB-Device. I tried to disable the dcache but the problem still remains. Another problem I have is that if I try to start a mainline kernel, it will crash with the following trace, I think it doesn't find the devicetree for some reasons: ## Booting kernel from Legacy Image at 02000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7258976 Bytes = 6.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 03000000 Booting using the fdt blob at 0x3000000 Loading Kernel Image ... OK Loading Device Tree to 7fb49000, end 7fb4ee70 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.0 (eichenberger at gruene) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 645 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Marvell Armada 385 Development Board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Unable to handle kernel paging request at virtual address 3fb49000 [ 0.000000] pgd = c0004000 [ 0.000000] [3fb49000] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0 #67 [ 0.000000] Hardware name: Marvell Armada 380/385 (Device Tree) [ 0.000000] task: c06bd528 ti: c06b8000 task.ti: c06b8000 [ 0.000000] PC is at fdt_check_header+0x0/0x78 [ 0.000000] LR is at __unflatten_device_tree+0x1c/0x12c [ 0.000000] pc : [] lr : [] psr: 200001d3 [ 0.000000] sp : c06b9f38 ip : 00000000 fp : ef7fce40 [ 0.000000] r10: c071d2f0 r9 : c05c4d7c r8 : 3fb49000 [ 0.000000] r7 : c069454c r6 : c06be514 r5 : c0712f68 r4 : c069454c [ 0.000000] r3 : c071d308 r2 : c069454c r1 : c071d2f0 r0 : 3fb49000 [ 0.000000] Flags: nzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 0000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc06b8220) [ 0.000000] Stack: (0xc06b9f38 to 0xc06ba000) [ 0.000000] 9f20: ffffffff c0700000 [ 0.000000] 9f40: ffff1000 0002f7ff 00001000 00000007 c069e348 c069454c c0712f68 c06be514 [ 0.000000] 9f60: c06c2dc0 c06be514 0000000c c069514c c069e348 c0679448 ffffffff 10c5387d [ 0.000000] 9f80: 414fc091 00000000 00000000 c005aa68 c05c38cc c06b9fb4 00000000 00000000 [ 0.000000] 9fa0: 00000001 ffffffff c06f4380 00000000 414fc091 00000000 00000000 c067693c [ 0.000000] 9fc0: 00000000 00000000 00000000 00000000 00000000 c06a9288 00000000 c06f4614 [ 0.000000] 9fe0: c06ba4c0 c06a9284 c06be624 0000406a 00000000 0000807c 00000000 00000000 [ 0.000000] [] (fdt_check_header) from [] (__unflatten_device_tree+0x1c/0x12c) [ 0.000000] [] (__unflatten_device_tree) from [] (unflatten_device_tree+0x1c/0x34) [ 0.000000] [] (unflatten_device_tree) from [] (setup_arch+0x6e8/0x970) [ 0.000000] [] (setup_arch) from [] (start_kernel+0x88/0x3c0) [ 0.000000] [] (start_kernel) from [<0000807c>] (0x807c) [ 0.000000] Code: e3e0300d eafbbec4 e3e0300d eafbbec9 (e5903000) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Do you have an idea what I'm doing wrong here? With the SDK U-Boot everything works fine. Best regards, Stefan