From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2098\)) Subject: Re: [PATCH] BlueZ line discipline baud rate setting update From: Marcel Holtmann In-Reply-To: <1434387007-3666-2-git-send-email-ifaenson@broadcom.com> Date: Mon, 15 Jun 2015 19:35:42 +0200 Cc: linux-bluetooth@vger.kernel.org Message-Id: <5A718AB3-958E-415A-B60E-4BC4827DB583@holtmann.org> References: <1434387007-3666-1-git-send-email-ifaenson@broadcom.com> <1434387007-3666-2-git-send-email-ifaenson@broadcom.com> To: Ilya Faenson Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Ilya, > Bring the tty into a known 8 bits, 1 start bit, 1 stop bit, > hardware flow control state with a given baud rate. > > Signed-off-by: Ilya Faenson > --- > drivers/bluetooth/hci_ldisc.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c > index ac87346..606cc5a 100644 > --- a/drivers/bluetooth/hci_ldisc.c > +++ b/drivers/bluetooth/hci_ldisc.c > @@ -271,9 +271,16 @@ void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed) > struct tty_struct *tty = hu->tty; > struct ktermios ktermios; > > + /* Bring the UART into a known state with a given baud rate */ > ktermios = tty->termios; > ktermios.c_cflag &= ~CBAUD; > - ktermios.c_cflag |= BOTHER; > + ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | > + IGNCR | ICRNL | IXON); I think this one needs to align like this: &= ~(IGNBRK | .. | IGNCR | ..); However I can fix that one easily inline. So no worries. Fred, can you test this patch so I can add a Tested-by line. Regards Marcel