All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>
Subject: [GIT PULL] ASoC fixes for v6.14-rc2
Date: Thu, 13 Feb 2025 18:40:36 +0000	[thread overview]
Message-ID: <6a7865dfe2acc782da9c7aed79deeffe.broonie@kernel.org> (raw)

The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b:

  Linux 6.14-rc1 (2025-02-02 15:39:26 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.14-rc2

for you to fetch changes up to 571b69f2f9b1ec7cf7d0e9b79e52115a87a869c4:

  ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device (2025-02-13 11:34:32 +0000)

----------------------------------------------------------------
ASoC: Fixes for v6.14

More fixes and deviec quirks, most of them driver specific including a
few SOF robustness fixes.  Nothing super remarkable individually.

----------------------------------------------------------------
Bard Liao (2):
      ASoC: Intel: soc-acpi-intel-tgl-match: declare adr as ull
      ASoC: Intel: soc-acpi-intel-mtl-match: declare adr as ull

Cristian Ciocaltea (4):
      ASoC: SOF: amd: Add post_fw_run_delay ACP quirk
      ASoC: SOF: amd: Drop unused includes from Vangogh driver
      ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE
      ASoC: SOF: amd: Add branch prediction hint in ACP IRQ handler

John Keeping (1):
      ASoC: rockchip: i2s-tdm: fix shift config for SND_SOC_DAIFMT_DSP_[AB]

Kuninori Morimoto (4):
      ASoC: simple-card-utils.c: add missing dlc->of_node
      ASoC: rsnd: indicate unsupported clock rate
      ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime()
      ASoC: rsnd: adjust convert rate limitation

Mark Brown (5):
      ASoC: Intel: soc-acpi-intel-tgl/mtl-match: declare adr
      ASoC: rsnd: adjust convert rate in 1%
      ASoC: SOF: Correct sps->stream and cstream nullity
      ASoC: Intel: sof_sdw: Add support for new devices
      ASoC: Intel: soc-acpi-intel-ptl-match typo fixups

Nikita Zhandarovich (1):
      ASoC: fsl_micfil: Enable default case in micfil_set_quality()

Peter Ujfalusi (5):
      ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data()
      ASoC: SOF: pcm: Clear the susbstream pointer to NULL on close
      ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers
      ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt712_vb + rt1320 support
      ASoC: Intel: soc-acpi-intel-ptl-match: revise typo of rt713_vb_l2_rt1320_l13

Richard Fitzgerald (2):
      ASoC: Intel: sof_sdw: Add lookup of quirk using PCI subsystem ID
      ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S14

Shenghao Ding (1):
      ASoC: tas2781: drop a redundant code

Shengjiu Wang (1):
      ASoC: imx-audmix: remove cpu_mclk which is from cpu dai device

Stefan Binding (2):
      ASoC: cs35l41: Fallback to using HID for system_name if no SUB is available
      ASoC: cs35l41: Fix acpi_device_hid() not found

Terry Cheong (1):
      ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module

Uday M Bhat (1):
      ASoC: Intel: sof_sdw: Add support for Fatcat board with BT offload enabled in PTL platform

Vitaly Rodionov (1):
      ASoC: arizona/madera: use fsleep() in up/down DAPM event delays.

 sound/soc/codecs/arizona.c                        |  14 +--
 sound/soc/codecs/cs35l41.c                        |  30 ++++--
 sound/soc/codecs/madera.c                         |  10 +-
 sound/soc/codecs/tas2781-i2c.c                    |   4 +-
 sound/soc/codecs/wm5110.c                         |   8 +-
 sound/soc/fsl/fsl_micfil.c                        |   2 +
 sound/soc/fsl/imx-audmix.c                        |  31 ------
 sound/soc/generic/simple-card-utils.c             |   1 +
 sound/soc/intel/boards/sof_sdw.c                  |  41 ++++++--
 sound/soc/intel/common/soc-acpi-intel-mtl-match.c |   2 +-
 sound/soc/intel/common/soc-acpi-intel-ptl-match.c |  12 +--
 sound/soc/intel/common/soc-acpi-intel-tgl-match.c |  16 +--
 sound/soc/renesas/rcar/core.c                     |  14 ---
 sound/soc/renesas/rcar/rsnd.h                     |   1 -
 sound/soc/renesas/rcar/src.c                      | 116 +++++++++++++++++-----
 sound/soc/renesas/rcar/ssi.c                      |   3 +-
 sound/soc/rockchip/rockchip_i2s_tdm.c             |   4 +-
 sound/soc/sof/amd/acp-ipc.c                       |  25 +++--
 sound/soc/sof/amd/acp.c                           |   1 +
 sound/soc/sof/amd/acp.h                           |   1 +
 sound/soc/sof/amd/pci-vangogh.c                   |   2 -
 sound/soc/sof/amd/vangogh.c                       |  22 +++-
 sound/soc/sof/intel/hda-codec.c                   |   1 +
 sound/soc/sof/ipc4-topology.c                     |  12 ++-
 sound/soc/sof/pcm.c                               |   2 +
 sound/soc/sof/stream-ipc.c                        |   6 +-
 26 files changed, 245 insertions(+), 136 deletions(-)

             reply	other threads:[~2025-02-13 18:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-13 18:40 Mark Brown [this message]
2025-02-14  7:26 ` [GIT PULL] ASoC fixes for v6.14-rc2 Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a7865dfe2acc782da9c7aed79deeffe.broonie@kernel.org \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=lgirdwood@gmail.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.