* [PATCH] add firmware update for Atheros 0cf3:311f
@ 2012-07-11 8:41 Oliver Neukum
0 siblings, 0 replies; 4+ messages in thread
From: Oliver Neukum @ 2012-07-11 8:41 UTC (permalink / raw
To: linux-bluetooth, Marcel Holtmann, Gustavo Padovan, Al Cho,
Johan Hedberg
=46rom 2953dd7d54dbc09fb351fcf90698524450a09613 Mon Sep 17 00:00:00 2001
=46rom: Oliver Neukum <oliver@neukum.org>
Date: Wed, 11 Jul 2012 09:57:38 +0200
Subject: [PATCH] add firmware update for Atheros 0cf3:311f
The device is not functional without firmware.
The device without firmware:
T: Bus=3D02 Lev=3D02 Prnt=3D02 Port=3D05 Cnt=3D01 Dev#=3D 3 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.10 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0cf3 ProdID=3D311f Rev=3D00.01
C: #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
The device with firmware:
T: Bus=3D02 Lev=3D02 Prnt=3D02 Port=3D05 Cnt=3D01 Dev#=3D 4 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.10 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0cf3 ProdID=3D3007 Rev=3D00.01
C: #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
Signed-off-by: Oliver Neukum <oneukum@suse.de>
=2D--
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 54730ec..0a72d82 100644
=2D-- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[] =3D {
{ USB_DEVICE(0x0CF3, 0x3004) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
+ { USB_DEVICE(0x0CF3, 0x311F) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
@@ -101,6 +102,7 @@ static struct usb_device_id ath3k_blist_tbl[] =3D {
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info =3D BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311F), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info =3D BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a2347bf..9909dd0 100644
=2D-- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -137,6 +137,7 @@ static struct usb_device_id blacklist_table[] =3D {
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info =3D BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311f), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info =3D BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info =3D BTUSB_ATH3012 },
=2D-=20
1.7.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] add firmware update for Atheros 0cf3:311f
@ 2014-01-16 15:02 oliver
2014-01-16 15:02 ` oliver
0 siblings, 1 reply; 4+ messages in thread
From: oliver @ 2014-01-16 15:02 UTC (permalink / raw
To: acho, marcel, gustavo, johan.hedberg, linux-bluetooth
Cc: Oliver Neukum, Oliver Neukum
From: Oliver Neukum <oliver@neukum.org>
The device is not functional without firmware.
The device without firmware:
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=311f Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
The device with firmware:
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=3007 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Oliver Neukum <oneukum@suse.de>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index b0a875b..3822621 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -78,6 +78,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
+ { USB_DEVICE(0x0CF3, 0x311F) },
{ USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -121,6 +122,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e15b580..9f61dde 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -145,6 +145,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
--
1.8.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] add firmware update for Atheros 0cf3:311f
2014-01-16 15:02 [PATCH] add firmware update for Atheros 0cf3:311f oliver
@ 2014-01-16 15:02 ` oliver
2014-01-16 22:48 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: oliver @ 2014-01-16 15:02 UTC (permalink / raw
To: acho, marcel, gustavo, johan.hedberg, linux-bluetooth
Cc: Oliver Neukum, Oliver Neukum
From: Oliver Neukum <oliver@neukum.org>
The device is not functional without firmware.
The device without firmware:
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=311f Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
The device with firmware:
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=3007 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Oliver Neukum <oneukum@suse.de>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index b0a875b..3822621 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -78,6 +78,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
+ { USB_DEVICE(0x0CF3, 0x311F) },
{ USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -121,6 +122,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e15b580..9f61dde 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -145,6 +145,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
--
1.8.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] add firmware update for Atheros 0cf3:311f
2014-01-16 15:02 ` oliver
@ 2014-01-16 22:48 ` Marcel Holtmann
0 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2014-01-16 22:48 UTC (permalink / raw
To: Oliver Neukum
Cc: Yu-Chen Cho, Gustavo F. Padovan, Johan Hedberg,
linux-bluetooth@vger.kernel.org development, Oliver Neukum
Hi Oliver,
> The device is not functional without firmware.
>
> The device without firmware:
> T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=311f Rev=00.01
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> The device with firmware:
> T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=3007 Rev=00.01
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> Signed-off-by: Oliver Neukum <oneukum@suse.de>
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-01-16 22:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-16 15:02 [PATCH] add firmware update for Atheros 0cf3:311f oliver
2014-01-16 15:02 ` oliver
2014-01-16 22:48 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2012-07-11 8:41 Oliver Neukum
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.