From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-0.7 required=3.0 tests=BAYES_00,DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED,DKIM_VALID,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 40E8AC2BB48 for ; Tue, 15 Dec 2020 10:16:07 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id CDAD322202 for ; Tue, 15 Dec 2020 10:16:06 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org CDAD322202 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=gmail.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:To:Subject:Message-ID:Date:From:In-Reply-To: References:MIME-Version:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=r8ABoJWZPmT7RUe3iDWwJ1fmbl1BSeWnLX53Sapoq9c=; b=Vm07VYoaQeyqCz9FwLpH126jm TJv4dMKBmWFfO+kcSEociv3ztxmNsGzeSG8LH8SuTtns850LAMCXqEo2a5ArbAmssIUGAun6+yHCt wgN7nZF/gba1EgKJ+k9dv+Tb80ccDQYQge6wNnOfhqF8fZwx9k7opmNLs12Um2ySxNmL+w8Pj2Cy8 H/vFTV1d30Ou2lk44IzZ9HxU0sve2b5PF1tbZn2Ui5CH8QLiz4lbdjW+EhlcAEzV1Lq8KLJfXTs+c nr0U6UBqhE8DP5Onkyo760GukTOyWzgTGrmdnV8DgfgER8SzJH3ZREQfK29ieWwBr8uXOwlbtN9+h rp8EHna3Q==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kp7M2-0007Uz-7B; Tue, 15 Dec 2020 10:14:50 +0000 Received: from mail-io1-xd2b.google.com ([2607:f8b0:4864:20::d2b]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kp7Ly-0007Tz-JR for linux-mtd@lists.infradead.org; Tue, 15 Dec 2020 10:14:48 +0000 Received: by mail-io1-xd2b.google.com with SMTP id d9so19937485iob.6 for ; Tue, 15 Dec 2020 02:14:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=zDhQOsKrjTaCUv75G8cPeRVaONcjLVIBaibHEU0W478=; b=XJ1D6oyf4qAK9GkbVwUplBbfCjod1/Cl8iqTXvPSXlTWm11ZGlC84kF/PwI/sGGVBT F8Aq5AOh+bp3AEYTJm8/giXt4mAsYJicUnEr4qk7snwAQIYM4jjvnKOytoTHFzyVdXmU sywaPWJaxxXPaF4PPK8DiqbvGuTGqHuo/E1/JespOZBTZa2+DbpL0oOBoI7zNhY353nN 0ZmycMumSbpNl9I84PeudXmWiihBawabbtxHU83A5WRTn+dwet05IeNa/b7CpuQ4Bjfr L5YOnQQUG7SujGRKJDtlKjwpez6Py7hpsHwaw93/XjqImgINkMW1JMB0i/0aPknznj/h +dnQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=zDhQOsKrjTaCUv75G8cPeRVaONcjLVIBaibHEU0W478=; b=lO86wLgr9IQnnPA6xaaQHEDpn1V7PrMnthI8V8crp+fXZ6HN45UBdBqt9+wUiiO74u WLEKdJoqfV3ICTfRYlPdbNpVQVphvDsBkyOkqGLkhJQOcntIgY0WyhQK7uSH2pOzknLS CzxPEJRBvuHmfwng++LsAkvTMGtMlyzaajveyLuE2Kmw5BYoC7+yUd9e+nGsOgnx73tI ACBcuTlRs+VN6luDb3ocY6NGDAWkWlXy4o3ygpwN45A5Wr6OqB4si86uRAv9vEtHIV7m E/YSTAsH3U8KZq6viJmwsWIpKgjUIApKYHJz0w4APyswg+rxSfE9DtJVDqadhz/aXdN8 3G/A== X-Gm-Message-State: AOAM530jSkV25Ygw4GbvCpsGwRpMUrt7qWclzm/xpCRVfEfay/37fh1E 859OFLzvyv8WmMcu00RxSkIdjqRqDbivDCQBo6I= X-Google-Smtp-Source: ABdhPJy9yt1G+hngQ/zyoadADNWZj0LdFipEvOL21ZFJ1geFBX0/iFTMd/fhTPHyuFn4DePhmYQXJ+Q5G8g/iN2RVJE= X-Received: by 2002:a02:c608:: with SMTP id i8mr38097973jan.125.1608027282000; Tue, 15 Dec 2020 02:14:42 -0800 (PST) MIME-Version: 1.0 References: <2020191742.126461.1607959229137.JavaMail.zimbra@nod.at> <20201215000355.760d3a95@xps13> In-Reply-To: <20201215000355.760d3a95@xps13> From: David Schaefer Date: Tue, 15 Dec 2020 11:14:31 +0100 Message-ID: Subject: Re: WD MyCloud Ex, Armada-370, pxa3xx-nand, marvell-nfc To: Miquel Raynal X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201215_051446_693305_B18F6E51 X-CRM114-Status: GOOD ( 23.97 ) X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Richard Weinberger , linux-mtd Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-mtd" Errors-To: linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org Hi Miquel, Am Di., 15. Dez. 2020 um 00:03 Uhr schrieb Miquel Raynal : > > > If this is a regression, how can we continue here? Can I give hardware > > > specs and logs? I have soldered on the board to access UART. I can > > > provide e.g. boot logs. > > > > No need to worry. Let's wait for Miquel, I'm sure he has an idea. > > In the absolute worst case we reconstruct the old driver. > > > > Yes indeed, this looks like a regression but I bet we already fixed it. > Perhaps there has been a backporting issue and we did not spot it. > Can you please try the following fixes (in this order): > f6997bec6af4 mtd: rawnand: marvell: fix the chip-select DT parsing logic > b76401fc4ba7 mtd: rawnand: marvell: pass ms delay to wait_op > a2ee41fd953e mtd: rawnand: marvell: fix command xtype in BCH write hook > 90d617633368 mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2 > 7fd130f7416f mtd: rawnand: marvell: support 8b/512B strength for 2kiB pages layout > 53c83b59759c mtd: rawnand: marvell: fix the IRQ handler complete() condition > cafb56dd741e mtd: rawnand: marvell: prevent timeouts on a loaded machine > c27075772d1f mtd: rawnand: marvell: Fix the condition on a return code Thank you for your suggested commits. I guess you are right and the issue already has been fixed. I am not sure which commit is working for production so I have attached the boot logs for all kernels that I obtained by cherry-picking your suggested commits from top to bottom, one by one. Please note that there was a merge conflict when merging 7fd130f7416f that I solved by '-X theirs'. Kind regards David ------------- cherry-pick f6997bec6af4 nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 -> does not continue booting ------------- cherry-pick b76401fc4ba7 nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2047 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal ata1: SATA link down (SStatus 0 SControl F300) marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2046 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2045 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2044 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2043 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2042 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 ata2: SATA link down (SStatus 0 SControl F300) marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2041 bad marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error while writing BBT block -110 marvell-nfc f10d0000.nand: Timeout waiting for RB signal marvell-nfc f10d0000.nand: Timeout waiting for RB signal nand_bbt: error -110 while marking block 2040 bad No space left to write bad block table nand_bbt: error while writing bad block table -28 marvell-nfc f10d0000.nand: nand_scan_tail failed: -28 marvell-nfc: probe of f10d0000.nand failed with error -28 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.59... Lease of 192.168.178.59 obtained, lease time 864000 Setting IP address 192.168.178.59 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.59... Lease of 192.168.178.59 obtained, lease time 864000 Setting IP address 192.168.178.59 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* ls: /dev/mtd*: No such file or directory ------------- cherry-pick a2ee41fd953e nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.66... Lease of 192.168.178.66 obtained, lease time 864000 Setting IP address 192.168.178.66 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.66... Lease of 192.168.178.66 obtained, lease time 864000 Setting IP address 192.168.178.66 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ------------- cherry-pick 90d617633368 nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.70... Lease of 192.168.178.70 obtained, lease time 864000 Setting IP address 192.168.178.70 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.70... Lease of 192.168.178.70 obtained, lease time 864000 Setting IP address 192.168.178.70 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ------------- cherry-pick 7fd130f7416f -X theirs nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.72... Lease of 192.168.178.72 obtained, lease time 864000 Setting IP address 192.168.178.72 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.72... Lease of 192.168.178.72 obtained, lease time 864000 Setting IP address 192.168.178.72 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ------------- cherry-pick 53c83b59759c nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.73... Lease of 192.168.178.73 obtained, lease time 864000 Setting IP address 192.168.178.73 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.73... Lease of 192.168.178.73 obtained, lease time 864000 Setting IP address 192.168.178.73 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ------------- cherry-pick cafb56dd741e nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.74... Lease of 192.168.178.74 obtained, lease time 864000 Setting IP address 192.168.178.74 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.74... Lease of 192.168.178.74 obtained, lease time 864000 Setting IP address 192.168.178.74 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ------------- cherry-pick c27075772d1f nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda nand: Hynix H27U2G8F2CTR-BC nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Bad eraseblock 1854 at 0x00000e7c0000 Bad block table written to 0x00000ffe0000, version 0x01 Bad block table written to 0x00000ffc0000, version 0x01 7 ofpart partitions found on MTD device pxa3xx_nand-0 Creating 7 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000500000 : "u-Boot" 0x000000500000-0x000000a00000 : "uImage" 0x000000a00000-0x000000f00000 : "ramdisk" 0x000000f00000-0x00000d800000 : "image.cfs" 0x00000dd00000-0x00000ec00000 : "rescue firmware" 0x00000ec00000-0x000010000000 : "config" 0x00000d800000-0x00000dd00000 : "reserve" Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed libphy: orion_mdio_bus: probed mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:02:02:00 usbcore: registered new interface driver lan78xx ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-orion: EHCI orion driver orion-ehci f1050000.usb: EHCI Host Controller orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1050000.usb: irq 27, io mem 0xf1050000 ata1: SATA link down (SStatus 0 SControl F300) orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 4.16.0+ ehci_hcd usb usb1: SerialNumber: f1050000.usb hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage ata2: SATA link down (SStatus 0 SControl F300) rtc-mv f1010300.rtc: internal RTC not ticking i2c /dev entries driver device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs marvell-cesa f1090000.crypto: CESA device successfully registered hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered Registering SWP/SWPB emulation handler Loading compiled-in X.509 certificates armada-370-pinctrl f1018000.pin-ctrl: unsupported function gpio on pin mpp54 pinctrl core: failed to register map default (0): invalid type given reg-fixed-voltage: probe of regulators:regulator@2 failed with error -22 input: gpio-keys as /devices/platform/gpio-keys/input/input0 hctosys: unable to open rtc device (rtc0) Freeing unused kernel memory: 1024K # Loading, please wait... # Mounting filesystems... # Check disk and init ### Press any key to stop and run shell... (2)print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock6, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock5, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock4, sector 0 print_req_error: I/O error, dev mtdblock3, sector 0 mdadm: No arrays found in config file or automatically # /dev/md1 not exist! # Runing a shell... mvneta f1074000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] mvneta f1074000.ethernet eth0: configuring for phy/rgmii-id link mode IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending discover... mvneta f1074000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.178.75... Lease of 192.168.178.75 obtained, lease time 864000 Setting IP address 192.168.178.75 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 udhcpc (v1.24.1) started Setting IP address 0.0.0.0 on eth0 Sending discover... Sending select for 192.168.178.75... Lease of 192.168.178.75 obtained, lease time 864000 Setting IP address 192.168.178.75 on eth0 Deleting routers route: SIOCDELRT: No such process Adding router 192.168.178.1 Recreating /etc/resolv.conf Adding DNS server 192.168.178.1 / # ls /dev/mtd* /dev/mtd0 /dev/mtd2ro /dev/mtd5 /dev/mtdblock1 /dev/mtdblock6 /dev/mtd0ro /dev/mtd3 /dev/mtd5ro /dev/mtdblock2 /dev/mtd1 /dev/mtd3ro /dev/mtd6 /dev/mtdblock3 /dev/mtd1ro /dev/mtd4 /dev/mtd6ro /dev/mtdblock4 /dev/mtd2 /dev/mtd4ro /dev/mtdblock0 /dev/mtdblock5 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/