From: Steven Toth <stoth@kernellabs.com>
To: tonyc@wincomm.com.tw
Cc: Linux-Media <linux-media@vger.kernel.org>
Subject: Re: www.kernellabs.com Contact: Hauppauge hvr1275 TV Tuner card linux problem
Date: Tue, 14 Jul 2015 08:51:21 -0400 [thread overview]
Message-ID: <CALzAhNV7EadNu6Yx78zVxwtx9u01PkrGAoyguvq=ZmLdtKZmew@mail.gmail.com> (raw)
In-Reply-To: <c29a3c94d042b15780c33b68f71d16fc@www.kernellabs.com>
Adding in the linux-media mailing list
> Subject:
> Hauppauge hvr1275 TV Tuner card linux problem
>
> Message:
> I had one trouble about Hauppauge hvr1275 TV Tuner card
>
> Because of I want use tvtime app to play this TV Tuner card with ATI
> V4900 VGA Card under centos 6.5 linux 2.6.32-431.el6.i686
>
> First I have download Firmeare from:
>
> # wget
> http://steventoth.net/linux/hvr1200/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
>
> # wget http://steventoth.net/linux/hvr1200/extract.sh
>
> # /bin/sh extract.sh
>
> # sudo cp v4l-cx23885-enc.fw v4l-cx23885-avcore-01.fw
> dvb-fe-tda10048-1.0.fw /lib/firmware
>
> Second create cx23885.conf in /etc/modprobe.d/
>
> Options cx23885 card=19
>
> Type modprobe cx23885 in terminal
>
> When I execute tvtime app always show can’t open /dev/video0
>
> When I use dmesg in terminal show below
>
> Linux video capture interface: v2.00
>
> cx23885 driver version 0.0.2 loaded
>
> cx23885 0000:04:00.0: PCI INT A -_ GSI 16 (level, low) -_ IRQ 16
>
> CORE cx23885[0]: subsystem: 0070:2a38, board: Hauppauge WinTV-HVR1275
> [card=19,insmod option]
>
> IR NEC protocol handler initialized
>
> IR RC5(x) protocol handler initialized
>
> IR RC6 protocol handler initialized
>
> IR JVC protocol handler initialized
>
> IR Sony protocol handler initialized
>
> lirc_dev: IR Remote Control driver registered, major 248
>
> IR LIRC bridge handler initialized
>
> tveeprom 11-0050: Hauppauge model 161100, rev A1I6, serial# 9140928
>
> tveeprom 11-0050: MAC address is 00:0d:fe:8b:7a:c0
>
> tveeprom 11-0050: tuner model is unknown (idx 186, type 4)
>
> tveeprom 11-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L')
> PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
>
> tveeprom 11-0050: audio processor is CX23888 (idx 40)
>
> tveeprom 11-0050: decoder processor is CX23888 (idx 34)
>
> tveeprom 11-0050: has no radio, has IR receiver, has no IR
> transmitter
>
> cx23885[0]: warning: unknown hauppauge model #161100
>
> cx23885[0]: hauppauge eeprom: model=161100
>
> cx23885_dvb_register() allocating 1 frontend(s)
>
> cx23885[0]: cx23885 based dvb card
>
> lgdt3305_attach: unable to detect LGDT3305 hardware
>
> cx23885[0]: frontend initialization failed
>
> cx23885_dvb_register() dvb_register failed err = -1
>
> cx23885_dev_setup() Failed to register dvb on VID_C
>
> cx23885_dev_checkrevision() Hardware revision = 0xd0
>
> cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 16, latency: 0,
> mmio: 0xfbe00000
>
> cx23885 0000:04:00.0: setting latency timer to 64
>
> alloc irq_desc for 34 on node -1
>
> alloc kstat_irqs on node -1
>
> if use dmesg | grep cx23885 in terminal show below
>
> cx23885 driver version 0.0.2 loaded
>
> cx23885 0000:05:00.0: PCI INT A -_ GSI 16 (level, low) -_ IRQ 16
>
> CORE cx23885[0]: subsystem: 0070:2a38, board: Hauppauge WinTV-HVR1275
> [card=19,insmod option]
>
> cx23885[0]: warning: unknown hauppauge model #161100
>
> cx23885[0]: hauppauge eeprom: model=161100
>
> cx23885_dvb_register() allocating 1 frontend(s)
>
> cx23885[0]: cx23885 based dvb card
>
> cx23885[0]: frontend initialization failed
>
> cx23885_dvb_register() dvb_register failed err = -1
>
> cx23885_dev_setup() Failed to register dvb on VID_C
>
> cx23885_dev_checkrevision() Hardware revision = 0xd0
>
> cx23885[0]/0: found at 0000:05:00.0, rev: 4, irq: 16, latency: 0,
> mmio: 0xfbe00000
>
> cx23885 0000:05:00.0: setting latency timer to 64
>
> cx23885 0000:05:00.0: irq 35 for MSI/MSI-X
>
> sorry I don’t know how can I do .. can you help me to fix the
> problem?
Please ensure that all communication include the linux media mailing list.
It looks like Hauppauge have released an updated HVR-1275 card, as
indicated by the updated PCI-SubDevice ID 2A38. The hardware has
changed and the driver needs to be modified to support these changes.
Modprobing with option=19 isn't going to help.
- Steve
--
Steven Toth - Kernel Labs
http://www.kernellabs.com
next parent reply other threads:[~2015-07-14 12:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <c29a3c94d042b15780c33b68f71d16fc@www.kernellabs.com>
2015-07-14 12:51 ` Steven Toth [this message]
2015-07-14 12:56 ` www.kernellabs.com Contact: Hauppauge hvr1275 TV Tuner card linux problem Steven Toth
2015-07-15 0:25 ` Tony Chang(Wincomm)
2015-07-16 12:08 ` Steven Toth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALzAhNV7EadNu6Yx78zVxwtx9u01PkrGAoyguvq=ZmLdtKZmew@mail.gmail.com' \
--to=stoth@kernellabs.com \
--cc=linux-media@vger.kernel.org \
--cc=tonyc@wincomm.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.