* [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ
@ 2015-06-08 8:52 Carlo Caione
2015-06-08 8:52 ` [PATCH 1/4] of: documentation: Add vedor prefix for Hardkernel and Tronfy Carlo Caione
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-08 8:52 UTC (permalink / raw
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
This patchset enables Meson8b and add the DTS files for Hardkernel Odroid-C1
and Tronfy MXQ.
Note that the DTS files depend on the header file that is already submitted
with the clock driver patches and already present in the clk tree in the
clk-meson8b branch.
Carlo Caione (4):
of: documentation: Add vedor prefix for Hardkernel and Tronfy
of: documentation: add bindings documentation for Meson8b
ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
ARM: meson: Enable Meson8b SoCs
Documentation/devicetree/bindings/arm/amlogic.txt | 6 +
.../devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/meson8b-mxq.dts | 65 +++++++++
arch/arm/boot/dts/meson8b-odroidc1.dts | 65 +++++++++
arch/arm/boot/dts/meson8b.dtsi | 151 +++++++++++++++++++++
arch/arm/mach-meson/Kconfig | 5 +
arch/arm/mach-meson/meson.c | 1 +
8 files changed, 298 insertions(+)
create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts
create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts
create mode 100644 arch/arm/boot/dts/meson8b.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/4] of: documentation: Add vedor prefix for Hardkernel and Tronfy
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
@ 2015-06-08 8:52 ` Carlo Caione
2015-06-08 8:52 ` [PATCH 2/4] of: documentation: add bindings documentation for Meson8b Carlo Caione
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-08 8:52 UTC (permalink / raw
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8033919..7de1637 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -90,6 +90,7 @@ gumstix Gumstix, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
+hardkernel Hardkernel Co. Ltd.
himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
@@ -195,6 +196,7 @@ tlm Trusted Logic Mobility
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
+tronfy Tronfy
truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/4] of: documentation: add bindings documentation for Meson8b
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
2015-06-08 8:52 ` [PATCH 1/4] of: documentation: Add vedor prefix for Hardkernel and Tronfy Carlo Caione
@ 2015-06-08 8:52 ` Carlo Caione
2015-06-08 8:52 ` [PATCH 3/4] ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards Carlo Caione
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-08 8:52 UTC (permalink / raw
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
Documentation/devicetree/bindings/arm/amlogic.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 973884a..b1a6444 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -9,6 +9,12 @@ Boards with the Amlogic Meson8 SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8";
+Boards with the Amlogic Meson8b SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8b";
+
Board compatible values:
- "geniatech,atv1200"
- "minix,neo-x8"
+ - "tronfy,mxq"
+ - "hardkernel,odroid-c1"
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
2015-06-08 8:52 ` [PATCH 1/4] of: documentation: Add vedor prefix for Hardkernel and Tronfy Carlo Caione
2015-06-08 8:52 ` [PATCH 2/4] of: documentation: add bindings documentation for Meson8b Carlo Caione
@ 2015-06-08 8:52 ` Carlo Caione
2015-06-08 8:52 ` [PATCH 4/4] ARM: meson: Enable Meson8b SoCs Carlo Caione
2015-06-20 7:36 ` [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
4 siblings, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-08 8:52 UTC (permalink / raw
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/meson8b-mxq.dts | 65 ++++++++++++++
arch/arm/boot/dts/meson8b-odroidc1.dts | 65 ++++++++++++++
arch/arm/boot/dts/meson8b.dtsi | 151 +++++++++++++++++++++++++++++++++
4 files changed, 284 insertions(+)
create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts
create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts
create mode 100644 arch/arm/boot/dts/meson8b.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 992736b..10b3dc5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -211,6 +211,9 @@ dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
+dtb-$(CONFIG_MACH_MESON8B) += \
+ meson8b-mxq.dtb \
+ meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
new file mode 100644
index 0000000..4730b94
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "TRONFY MXQ S805";
+ compatible = "tronfy,mxq", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
new file mode 100644
index 0000000..09a9533
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-C1";
+ compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
new file mode 100644
index 0000000..37fdf46
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x200>;
+ };
+
+ cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x201>;
+ };
+
+ cpu at 202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x202>;
+ };
+
+ cpu at 203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x203>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ L2: l2-cache-controller at c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller at c4301000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xc4301000 0x1000>,
+ <0xc4300100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer at c1109940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0xc1109940 0x14>;
+ interrupts = <0 10 1>;
+ };
+
+ uart_AO: serial at c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_A: serial at c81084c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81084c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_B: serial at c81084dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81084dc 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_C: serial at c8108700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc8108700 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ clkc: clock-controller at c1104000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8b-clkc";
+ reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+ };
+ };
+}; /* end of / */
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/4] ARM: meson: Enable Meson8b SoCs
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
` (2 preceding siblings ...)
2015-06-08 8:52 ` [PATCH 3/4] ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards Carlo Caione
@ 2015-06-08 8:52 ` Carlo Caione
2015-06-20 7:36 ` [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
4 siblings, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-08 8:52 UTC (permalink / raw
To: linux-arm-kernel
From: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
arch/arm/mach-meson/Kconfig | 5 +++++
arch/arm/mach-meson/meson.c | 1 +
2 files changed, 6 insertions(+)
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 0743e20..5d56f86 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -19,4 +19,9 @@ config MACH_MESON8
default ARCH_MESON
select MESON6_TIMER
+config MACH_MESON8B
+ bool "Amlogic Meson8b SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
endif
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 5d6affe..4e23571 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -19,6 +19,7 @@
static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
"amlogic,meson8",
+ "amlogic,meson8b",
NULL,
};
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
` (3 preceding siblings ...)
2015-06-08 8:52 ` [PATCH 4/4] ARM: meson: Enable Meson8b SoCs Carlo Caione
@ 2015-06-20 7:36 ` Carlo Caione
4 siblings, 0 replies; 6+ messages in thread
From: Carlo Caione @ 2015-06-20 7:36 UTC (permalink / raw
To: linux-arm-kernel
On Mon, Jun 8, 2015 at 10:52 AM, Carlo Caione <carlo@caione.org> wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> This patchset enables Meson8b and add the DTS files for Hardkernel Odroid-C1
> and Tronfy MXQ.
>
> Note that the DTS files depend on the header file that is already submitted
> with the clock driver patches and already present in the clk tree in the
> clk-meson8b branch.
>
> Carlo Caione (4):
> of: documentation: Add vedor prefix for Hardkernel and Tronfy
> of: documentation: add bindings documentation for Meson8b
> ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
> ARM: meson: Enable Meson8b SoCs
>
> Documentation/devicetree/bindings/arm/amlogic.txt | 6 +
> .../devicetree/bindings/vendor-prefixes.txt | 2 +
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/meson8b-mxq.dts | 65 +++++++++
> arch/arm/boot/dts/meson8b-odroidc1.dts | 65 +++++++++
> arch/arm/boot/dts/meson8b.dtsi | 151 +++++++++++++++++++++
> arch/arm/mach-meson/Kconfig | 5 +
> arch/arm/mach-meson/meson.c | 1 +
> 8 files changed, 298 insertions(+)
> create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts
> create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts
> create mode 100644 arch/arm/boot/dts/meson8b.dtsi
Any feedback on this?
--
Carlo Caione
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-06-20 7:36 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-08 8:52 [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
2015-06-08 8:52 ` [PATCH 1/4] of: documentation: Add vedor prefix for Hardkernel and Tronfy Carlo Caione
2015-06-08 8:52 ` [PATCH 2/4] of: documentation: add bindings documentation for Meson8b Carlo Caione
2015-06-08 8:52 ` [PATCH 3/4] ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards Carlo Caione
2015-06-08 8:52 ` [PATCH 4/4] ARM: meson: Enable Meson8b SoCs Carlo Caione
2015-06-20 7:36 ` [PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ Carlo Caione
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.